LoadLibrary failed: unable to load CS4 PC Plugin

Similar Questions

• I did a reinstall on my XP. He cleaned the disc then says that he would reinstall. Now it is stuck in the Mode without fail.-"unable to load then reinstall it in safe mode, will restart"

  I had a lot of problems with my desktop computer, so I decided to do a reinstall.  I had to uninstall the old windows machine and then he tried to reinstall.  But the safe mode screen comes up and I get a message that 'could not load reinstall it so that in safe mode, recover to walk'.  He kekeps this and I have no way of getting to my Start menu or anything except f8, etc..  What can I do?

  You're not start from the disc. Check your bios settings to make sure that your cd rom device is set to boot first. Restart the computer. You must first see a screen that says "press any key to boot from a cd. Then you will see a screen that says "NTDetect inspects the hardware configuration of your computer. The screen you will see next will be "loading files". If you see all the other screens then you dΘmarrez not from disk. I'm not really sure of what you mean you got the machine to remove the old windows. The 'old' windows is deleted when formatting that is part of the installation process.

  http://support.Microsoft.com/kb/978307

• Unable to load plugin - I tried everything offers

  Unable to load plugin:

  I had this problem occurs earlier today, I tried everything that was suggested, but no luck either. Here is what I tried, I hope someone can help me (in part to say use Firefox).

  
  

  Tried:

  1.) uninstall and install again - still the same

  2.) flash player install 18 - still the same

  (3.) I checked my directory of chrome for the file pepperflash can I change the name that apparently suits him. Nothing in the directory says:

  C:\Users\NAME\AppData\Local\Google\Chrome\User Data\PepperFlash

  4.) Chrome uninstall and install again (however do not get rid of the add-ons/extensions etc.)

  5.) check the directory of the application instead, nothing inside either:

  C:\Users\NTEA\AppData\Local\Google\Chrome\Application\ < string of the number >

  
  

  6.) break my head on the keyboard, because I'm frustrated - now my head hurts.
  

  There is nothing more said on forums about it, so I hope someone can help here instead.

  Thank you

  I had this problem also, I did a clean install of win10 and it just happened to me. I just fixed it by chrome UN-installing reboot and then re-installed again.

• STILL UNABLE TO LOAD WEBSITES IN FF, WELL THAT NO PROBLEM WITH IE OR AOL. I THINK I TRIED EVERYTHING SUGGESTED.

  The Mozilla FF page loads, but no site that is open in FF. I checked the Proxy box, I disabled my Windows Firewall. There is a firewall for my Norton, but which has been there since day 1. One day, I do all my things FF without problem; the next morning I turn the computer on & nothing in FF will work. That is to say works well. AOL works fine if my internet connection is not the problem. This is the message that I get any site I try to open (I also copied the text of troubleshooting below this): thanks for any help - it's really driving me crazy!

  Unable to connect
  Firefox can't establish a connection to the server www.aol.com.

     The site could be temporarily unavailable or too busy. Try again in a few moments.
     If you are unable to load any pages, check your computer's network connection.
     If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
  

  Troubleshooting 'copy text to the Clipboard.
  The application databases

  Name: Firefox
  Version: 33.0.2
  User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; RV:33.0) Gecko/20100101 Firefox/33.0
  Windows multiprocessing: 0/1

  Reports of incidents for the last 3 days

  All Crash reports

  Extensions

  Name: AVG toolbar backup
  Version: 17.1.3.3
  Enabled: false
  ID: avg@toolbar

  Name: InfoAtoms
  Version: 1.5.0.0
  Enabled: false
  ID: [email protected]

  Name: Norton Toolbar
  Version: 2014.7.8.23
  Enabled: false
  ID: {2D3F3651-74B9-4795-BDEC-6DA2F431CB62}

  Name: PasswordBox
  Version: 1.20.0.2308
  Enabled: false
  ID: [email protected]

  Name: RealDownloader
  Version: 1.3.3
  Enabled: false
  ID: {DF153AFF-6948-45d7-AC98-4FC4AF8A08E2}

  Name: Skype Click-to-Call
  Version: 6.13.0.13771
  Enabled: false
  ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}

  Graphics

  Description of the adapter: Intel G41 Express Chipset
  Drivers: igdumd64 igd10umd64 igdumdx32 igd10umd32
  RAM card: unknown
  Device ID: 0x2e32
  Direct2D Enabled: true
  DirectWrite Enabled: true (6.2.9200.16571)
  Driver date: 11/02/2011
  Driver version: 8.15.10.2302
  GPU #2 Active: false
  GPU accelerated Windows: 1/1 Direct3D 11 (OMTC)
  Vendor ID: 0 x 8086
  WebGL Renderer: Google Inc. - ANGLE (Intel G41 Express Chipset Direct3D9Ex vs_3_0 ps_3_0)
  windowLayerManagerRemote: true
  AzureCanvasBackend: direct2d
  AzureContentBackend: direct2d
  AzureFallbackCanvasBackend: Cairo
  AzureSkiaAccelerated: 0

  Important change preferences

  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.Disk.smart_size.use_old_max: false
  Browser.cache.frecency_experiment: 1
  browser.places.smartBookmarksVersion: 7
  browser.sessionstore.upgradeBackup.latestBuildID: 20141027150301
  Browser.Startup.homepage_override.buildid: 20141027150301
  Browser.Startup.homepage_override.mstone: 33.0.2
  extensions.lastAppVersion: 33.0.2
  GFX. Direct3D.last_used_feature_level_idx: 1
  network.cookie.prefsMigrated: true
  places. History.expiration.transient_current_max_pages: 103947
  plugin.disable_full_page_plugin_for_types: application/pdf
  plugin.importedState: true
  privacy.sanitize.migrateFx3Prefs: true

  Important preferences locked

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.7
  Version: 4.10.7

  NSS
  The expected minimum version: 3.17.1 Basic ECC
  Version: 3.17.1 Basic ECC

  NSSSMIME
  The expected minimum version: 3.17.1 Basic ECC
  Version: 3.17.1 Basic ECC

  NSSSSL
  The expected minimum version: 3.17.1 Basic ECC
  Version: 3.17.1 Basic ECC

  NSSUTIL
  The expected minimum version: 3.17.1
  Version: 3.17.1

  Experimental features

  An update: as mysteriously as it started last Friday, it fixed itself today (apparently). I left my computer when I'm out in early afternoon after having tried again to open up all sorts of websites in FF with no luck. When I came back from my races it was back to normal - able to open all Web sites again. Obviously, firefox Elves snuck into my house while I was out and fixed what it was. I would like to know what!

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error when you try to start Age of Empire III-unable to load DATAP. BAR

  I try to run aoe 3, but it displays unable to load datap.bar? why?

  Hi AldrichFurtal,
   
  Follow the suggestion given by "su airodump-ng - c" post below what similar problem to address:
   
   
  initialization failed could not load DATAP. BAR

• Unable to load the user profile?

  I tried command prompt, changes in safe mode, go to the control panel and changed the .bak thing, but it did not always help! It is on my ADMIN account, and all about it is blocked. I can't download or update anything because the password does not work - I can't even sync the songs on my phone because of that! So everything around having to use approval of the Admin does not work. The changes that I have on safe mode did not hit anything! What should I do?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.
  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in
  Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 - free methods system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error "the user profile Service has no logon. Unable to load the user profile.

  Original title: admin user account

  the user profile service service is a not the logon user profile cannot be loaded, this is the error I received - it's my account Admin what should I do to correct this. I have come back before this happened. Help, please

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error "LoadLibrary failed with error 126: the module is not found" when run Minecraft

  I tried to load my Minecraft, Minecraft is everything to date and nothing wrong with it. I deleted and re-installed, and I still get this problem.

  Pitcher of the same technical does not work so he couldn't be just minecraft (Technic Modded = customer type of)
  I even made another account on my laptop and some files to another account just Minecraft and it still does not work, in browser game works perfectly, but on computer laptop, it is not, it allows to work but now is not.
  I did all of the things listed on that, and Minecraft still does not work.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-LoadLibrary-failed-with-error-126-the-module/c5b67473-00f8-4E4A-b8a5-f7f9c619c3d9
  I am running Windows 8, Dell Inspiration M5040.
  
  I hope that you could solve my problem.

  Had this problem on my pro Win8

  Uninstalled 64-bit Java (7 update 17) and left the 32 bit one.

  Has started working without any other trix.

• LoadLibrary failed with error 126 that the specified module could not be found

  Hello, I receive this error randomly when am using oracle sql developer, sometimes, it happens just after the start and sometimes after 5 minutes.

  the error closes the program

  Help, please

  Looking for "loadlibrary failed with the 126 java error" seems to indicate problems with OpenGL and some video drivers and/or environments with multiple monitors. Here are several discussions...

  https://NetBeans.org/bugzilla/show_bug.cgi?id=243153

  Error "LoadLibrary failed with error 126: the module could not - Microsoft Community.

  [SOLVED] Problem with Launcher Technic: load library failed with error 126 - Technic Launcher - Technic Forums

  Therefore, it seems that this issue is not specific to SQL Developer. The last discussion includes a video link in his last message saying that ".dll" is sought instead of "atioglxx.dll' on 32 - bit or systems 'atio6axx.dll' on 64 bit (in the C:\Windows\system32 folder) system, so a workaround is to copy one of those to".dll ".

• My laptop crashed and I bought a new one and you want to load cs4 on it. What should I do?

  my laptop crashed and I bought a new one and you want to load cs4 on it. What should I do?

  You will need your serial number.

  If the old machine is no longer working at all you must contact Adobe Support by chat and ask them to reset your activations. It is not necessary if you never activated once before (you are allowed two active facilities), but it can't hurt to have the available extra

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

  If you need you can download files from installation through the links below...

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  There is no guarantee that older software will install properly on a new operating system.

• 1002097 unable to load the database [plane1]

  Hi all
  
  I'm not able to start the essbase database. When I start the application database, I get the message below from the Panel.
  
  Server. XXXXAPP. Properties of database base1 get April 5, 2011 14:57:27 CAT Failed
  Error: 1002097 failed to load the database [plane1]
  [Error: network error 1042015: cannot locate connect information for]
  Server. XXXXAPP. Properties of database base1 get April 5, 2011 14:57:36 CAT Failed
  Error: 1053001 cannot open the file of the object: C:\Hyperion\products\Essbase\EssbaseServer\app\XXXXAPP\Plan1\Plan1.esm
  Server. XXXXAPP. Properties of database base1 get April 5, 2011 14:57:36 CAT Failed
  Error: 1053001 cannot open the file of the object: C:\Hyperion\products\Essbase\EssbaseServer\app\XXXXAPP\Plan1\Plan1.esm
  Server. XXXXAPP. Properties of database base1 get April 5, 2011 14:57:40 CAT Failed
  Error: 1002097 failed to load the database [plane1]
  
  I tried to delete the app to essbase and create the planning (refreh/create) which also gives me an olap planning exception "unable to load the database.
  
  I can not open too many forms. It gives me "unable to get a connection to Hyperion Essbase. If the problem persists, please contact your administrator. "
  
  Any help... ?
  
  Thank you!
  
  Published by: user8819264 on April 5, 2011 07:52
  
  Published by: user8819264 on April 5, 2011 08:27

  Stop all essbase applications and then check if there are any ongoing esssvr process, if there is you will have to kill him.
  So try and create it again.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• CIS API: Run-time code system error; Unable to load the English locale "American."

  Hello
  
  I am trying to connect to a CS using api cis. with socket connection. I get the below error. I tried changing the settings regional en_US also but no use...
  
  The content server is on linux, where, as I'm running the java file of windows xp machine.
  The config xml adapter has the entries below
  
  
  < name of adapter = default "myadapter" = "true" type = "scs" >
  < config >
  < property name = "version" > 75 < / property >
  < property name = "port" > 4441 < / property >
  < property name = "type" > socket < / property >
  < property name = "Home" > XX. XX. XX.XXX < / property >
  < / config >
  < template="classpath:/META-INF/resources/adapter/adapter-services-scs.jxml"/ beans >
  < / adapter >
  
  
  Any help would be very useful... Thanks in advance
  
  The content server log:
  Error running code system. Failed to retrieve information about the revision. Unable to load locale 'American English '. [Details]
  
  An error has occurred. The stack trace below shows more information.
  
  ! csSystemCodeExecutionError! csUnableToGetRevInfo! csLocaleNotFound, English-US
  intradoc.common.ServiceException:! csUnableToGetRevInfo! csLocaleNotFound, English-US
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1753)
  at intradoc.server.Service.buildServiceException(Service.java:1997)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
  at intradoc.server.Service.createServiceException(Service.java:1986)
  at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImplementor.java:607)
  at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:406)
  at intradoc.server.Service.initLocale(Service.java:333)
  at intradoc.server.Service.initDelegatedObjects(Service.java:201)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:358)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
  
  Error in the console:
  
  
  
  e of the exception: com.stellent.cis.server.api.scs.request.SCSRequestException: Error executing code system.
  
  com.stellent.cis.client.command.CommandException: com.stellent.cis.server.api.scs.request.SCSRequestException: Error executing code system.
  
  at com.stellent.cis.server.api.scs.impl.SCSCommand.executeRequest(SCSCommand.java:338)
  
  at com.stellent.cis.server.api.scs.impl.SCSCommand.execute(SCSCommand.java:222)
  
  at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:57)
  
  at com.stellent.cis.client.command.impl.CommandFacade.executeCommand(CommandFacade.java:158)
  
  at com.stellent.cis.client.command.impl.BaseCommandAPI.invokeCommand(BaseCommandAPI.java:84)
  
  at com.stellent.cis.client.api.scs.document.information.impl.SCSDocumentInformationAPI.getDocumentInformationByID(SCSDocumentInformationAPI.java:215)
  
  at com.pg.emfg.ewps.lotus.UploadFilesToUCM.updateMeta(UploadFilesToUCM.java:152)
  
  at com.pg.emfg.ewps.lotus.UploadFilesToUCM.main(UploadFilesToUCM.java:86)
  
  Caused by: com.stellent.cis.server.api.scs.request.SCSRequestException: Error executing code system.
  
  at com.stellent.cis.server.api.scs.request.impl.SCSRequestProcessor.checkBinderForErrors(SCSRequestProcessor.java:349)
  
  at com.stellent.cis.server.api.scs.request.impl.SCSRequestProcessor.validateResponse(SCSRequestProcessor.java:265)
  
  at com.stellent.cis.server.api.scs.request.impl.SCSRequestProcessor.processRequest(SCSRequestProcessor.java:117)
  
  at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:61)
  
  at com.stellent.cis.server.api.scs.request.stream.SCSOptimizedPublishFilter.handleRequest(SCSOptimizedPublishFilter.java:128)
  
  at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)
  
  at com.stellent.cis.server.api.scs.request.stream.SCSOptimizedRetrieveFilter.handleRequest(SCSOptimizedRetrieveFilter.java:250)
  
  at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)
  
  at com.stellent.cis.server.api.scs.request.rewrite.SCSRewriteURLFilter.handleRequest(SCSRewriteURLFilter.java:140)
  
  at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)
  
  at com.stellent.cis.server.api.scs.request.cache.impl.SCSServiceCacheFilter.handleRequest(SCSServiceCacheFilter.java:104)
  
  at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)
  
  at com.stellent.cis.server.api.scs.request.impl.SCSRequestExecutorProxy.execute(SCSRequestExecutorProxy.java:105)
  
  at com.stellent.cis.server.api.scs.impl.SCSCommand.executeViaProxy(SCSCommand.java:353)
  
  at com.stellent.cis.server.api.scs.impl.SCSCommand.executeRequest(SCSCommand.java:335)
  
  ... 7 more

  Hello

  Try added SystemLocale = English-USA in the config.cfg and then restart the content server to which CIS connects to perform a test to see if the problem still persists.

  Thank you
  Srinath

• Unable to load my iPhone 6 more?

  Unable to load my iphone 6 more?

  What happens when you connect it to a well known power USB adapter and a good cable lightning known?

• Error message: unable to load your Firefox profile. It may be missing or inaccessible

  I know that others have had this problem but none of the validated answers turned out to be viable. When I try to start Firefox, the browser does not open and I see the following message appears: "unable to load your Firefox profile. It may be missing or inaccessible. "I am running Windows 8.1.

  It's what happened leading up to this problem. I was passing through normally when I received a pop up message that says a threat has been detected, and Mozilla had a security patch that I have to download. This is the expedition of phishing malware believer, I closed the browser and restart the computer without having to download anything. When I restarted the computer, everything was normal and I googled for information on what had just happened, to see if I really needed a security patch. A forum suggested that I already have a virus/malware that caused the popup, and that I should deal with the possibility that updating Firefox. Then I refreshed Firefox, which seemed harmless enough. The update took the time, so I finally closed the window to refresh. Maybe I should let the window update but it was taken way too long - after that it's my problem to start with the error message.

  Since then, I've uninstalled and reinstalled Firefox. I also deleted the profile folder in the hope that it would force the creation of a new folder. Nothing has worked. Someone has suggestions for Firefox run again?

  Thank you!

  Hi jbspear, please press the windows key + r and open: %APPDATA%\protector.exe

  There you should find a folder named "Mozilla". try to rename it to something like "Mozilla.bak" (or delete it if you don't like your old firefox bookmarks, passwords and customizations) and then try to restart firefox...