Locate my information of history

Similar Questions

• What is the msiomq32.dll of file on my computer? I can't locate any information on it.

  What is the file msiomq32.dll is a problem starting it... can't find it on google nothing useful anyway... accept it is a Trojan or a virus, how to get rid of her... full. There is a problem with msiomq32.dll BTWC find given starting module

  original title: what is the msiomq32.dll file

  Scan your PC with these two free utilities

  http://www.Malwarebytes.org/products/malwarebytes_free

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Then run Disk Cleanup

  If still a problem, in msconfig Startup tab, check all entries

• Is it possible to change the default location where Firefox stores its profiles and browsing history

  Normally the profiles and browsing history stores in %APPDATA%\Mozilla\Firefox

  Now, I want to change the location somewhere ("like in the office"), even during installation or after the installation of Firefox.

  Can someone help me...

  Thanks in advance...

  Mickael Kuramala.

  Hello Michael, you can use the Profile Manager to create a new profile in a custom location. more information is available to use the Profile Manager to create and delete profiles Firefox.

• Siri in iOS10 does not accept the location based reminders; definition of reset

  I have a problem with iOS10 when you try to create a reminder using Siri location-based. Siri continues to ask me to allow access to my location for reminders in the settings. But even accepting that Siri seems to return this setting to disabled. It is possible to create the same using reminders App.

  Anyone with the same problem? And most importantly... someone has a solution?

  I use the Dutch language for Siri on an iPhone SE iOS10 running.

  HI Rob.nl,

  I understand that your location Services settings do not stay set when you try to use Siri program reminders. I know it's nice to be able to set reminders on the go, so I'm happy to help you.

  Let's start by making sure that your location service are configured before using same Siri. Find out how to set up here:

  On privacy and location in 8 and later versions - Apple iOS Support Services
  

  Enable or disable location Services

  You can enable or disable location Services in settings > privacy > location Services. You can enable location-based Services during the wizard process of installation or later through the creation of location-based Services. You can individually control applications and system services have access to the data of location Services. When location Services are disabled, the apps can't use your position in the foreground or background. You will thus limit the performance of various Apple and third-party applications.

  

  Settings > privacy > location Services.

  

  Settings > privacy > location Services > System Services.

  You can also create the same types of recalls in the application:

  Use reminders on your iPhone, iPad or iPod touch - Apple Support
  

  Choose where you want to be reminded

  Location reminders inform you when you arrive or leave a place, like home or work. To receive location based reminders, make sure the location Service is turned on and that your device supports this feature.

  To receive a reminder to a place:

  1. Press on to the right of your reminder, turn on Remind me somewhere and then on location.
  2. Search for or enter the address where you want to be reminded. You can even use your current location.
  3. Choose if you want a reminder when you leave or arrive at this place.
  4. Drag the black point on the circle in or out to change the perimeter of your reminder box.
  5. Click details to return to the previous screen, and then tap done.

  Location based reminders is available in iOS 8 or later on iPhone 4 and later versions, iPad Pro (Wi - Fi + cell), iPad (4th generation Wi - Fi + cell), Air and later (Wi - Fi + cell), 4 (Wi - Fi + cell) mini iPad iPad and iPod touch (6th generation).

  Thank you for using communities Support from Apple. See you soon!

• Since the update of Firefox, my laptop does not save my history. Where is my story?

  It will save the history during the session, in that you are, but when you reopen the browser there is no saved history. Cannot find anywhere to change. my other browsers are save the changes, but we prefer to use Firefox but it's too awkward right now.

  -> click on Firefox and click on Options -> privacy-> history-> section Firefox will: select "use Custom Settings for History" -> UNCHECK the box ' Permanent Private Browsing Mode ' -> place the check on:

  1 remember my browsing history 2) remember the history of 3 downloads) remember Search History 4) accept Cookies from sites-> click Exceptions... button and click on 'delete all Sites' 4A) accept third-party Cookies-> keep until: Select they expire

  -> REMOVE check MARK to CLEAR the HISTORY, the CLOSING of FIREFOX

  -> When you use the location bar, suggest: select "History and bookmarks"

  -> go to the Tools Menu-> Options-> Security-> place the check on:

  1 warn me when sites try to install 2 modules) block reported attack sites 3) all declared fake web

  -> click on the Firefox button, then click on Options -> advanced-> general-> remove the check mark from the warn me when Web sites try to redirect or reload the page

  -> click on the Firefox button, then click on Options -> advanced-> network-> Offline Storage (Cache): click on the clear now button

  -> Click OK-> restart Firefox Options window

  Be sure to NOT use the feature clear recent history

  • https://support.Mozilla.com/en-us/KB/clear%20Recent%20History

  Check and tell if its working.

• Having 2 error message when you try to connect to in__1. Unable to connect to a windows service__2. Location is not available

  System: Windows Vista Ultimate Edition

  Whenever I try to open the computer, I get two error message.

  1. impossible to connect to the service awindoes: Windows could not connect to the user profile service.  This problem prevents limited users to logon to the system.  As long as administrator, you can go through the system event log to see why the service did not respond.

  2 C:\\Windows\system32\config\systemprofile\Desktop makes reference to a location that is unavailable.  It could be on a hard drive on this computer or on a network.  Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again.  If it can't be located, the information may have been moved to a different location.

  Please help, I have of these massege error for some time.

  Try the system restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Try to connect as a different user if the symptoms were not your user profile is damaged.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope I could help

• Windows Vista before complete Edition and Windows 7 Ultimate is now creating a new office & this message "the location is not available.

  Dear Sir/Madam

  When I turned off my laptop and the switch once more, a problem occurs usually suddenly and my operating system "Vista Ultimate" done before and Windows 7 now do the same thing as well time and time again.

  The problem is often occurred when I start my PC which is the operating system attempts to create a new different OFFICE that is completely different to my usual DESKTOP with this message:

  (The location is not available)

  "C:\Windows\system32\config\systemprofile\Desktop refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure the office is inserted correctly, or that you are connected to the internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »

  I did format three times and reinstalled my OS Vista and 7 and the problem still occurs. But sometimes, and after passing it off several times the problem disappears. But when my work of operating system there is no problem at all. That's my problem.

  Thanks in advance

  Elsharif

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Above is the link for the Windows 7 Forums.

  They will answer your questions of Win 7.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Cannot locate the folder my pictures after I installed/upgraded to windows 7 Ultimate

  I recently updated my Vista to Window 7 Ultimate program. Before that, I had copied all my files, including images on a USB drive. Once Windows 7 had insow bee can I had lost a folder of photos. How can I get it back?

  I tried to open the folder called 'window photy Gallery', I received the following message is displayed:
  [Window title]

  Location is not available

  [Content]

  C:\Program Files\Windows photo library made reference to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to a different location.

  [OK].
  My Tel No:
  Please help
  Kind regards.
  Smail

  Hello

  Windows Photo Gallery is a program that displays all the images that are located in the folder images C:\Users\your utilisateur\Mes . This program does not store the photos.

  Search the hard disk to a folder named Windows.old. This folder will contain the personal data of the previous installation of Vista .

  Open the Windows.old folder, navigate to the pictures utilisateur\Mes Users\your folder. You should see all of the Vista installation in this folder.

  Copy or move pictures to the my pictures folder in the new folder of Windows 7 .

  Let us know if you have any other questions.

  Concerning

• 12.2.4 creating a requisition internal error (error of calculation of the tax: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction).

  Hi all

  I have created a new configuration of client and location. Now try to create IR and get below error.

  ----------------

  Error: The tax calculation: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction. Please contact your system administrator.

  --------------------

  I've made a few changes by looking at Doc-ID 1385936.1 and community discussions.

  Ran "Name geography program SEO" and the journal looks very good. No registration rejected.

  +---------------------------------------------------------------------------+

  From simultaneous program ' geo referencing worker name: 1'

  Start 08/07/15 07:44:56

  Treatment for the Table: HZ_LOCATIONS and run Type: ALL

  Parameters: Country Code: U.S.

  Use code: all THE

  Location Id: NULL: location Id: null

  Start date: NULL: End Date: NULL

  Number of workers: 1

  Total number of records of location of treaties: 7319

  Number of records managed: 7319

  Number of rejected records: 0

  Name of georeferencing process completed successfully

  +---------------------------------------------------------------------------+

  But still, I get the same error during the creation of IR

  Someone help me please by looking in the uploaded screenshots. Incase if any additional necessary information, pls let me know.

  This is related planning tests for this customer, I don't know about this part of the tax.

  Any help is really appreciated. Thanks in advance.

  Akshay

  PS: This is not the sensitive customer data.

  Hello Akshay,

  Can you please follow the note Transaction Workbench error: System cannot determine your location for information
  This location and cannot derive from a tax jurisdiction (Doc ID 438718.1) and see if that helps

• How to find information from the Team administrator

  Hello

  We try to make changes to the composition of our team, but we are unable to find information on the search for the connection that has been created for the administrator of our team. We hoped to find additional information on how to locate this information, or how to assign the administrator account on the team to someone else.

  Thank you

  -Jim

  Hi Jim,.

  In addition, you can refer to the CC for teams FAQ: Creative cloud for teams FAQ: How can I manage my account teams?

  Hope that helps!

  Kind regards

  Sheena

• Where information on the complexity of password expiration frequency, timeout settings, etc.?

  My audit people are looking for answers to these questions about creative cloud products (we have Acrobat Pro DC and all Apps):

  (1) Composition of password requirements

  (2) frequency of Expiration

  (3) response to the attempts of unauthorized access

  (4) the system timeout settings

  (5) access restrictions (Time-of-day) (day of week)

  I spent a few hours trying to locate this information without result.

  Can someone at Adobe please provide answers for these questions above?

  We need as soon as POSSIBLE.

  Thank you!

  Composition of the password requirements are visible from the account settings under change password.

  

  The password expires after 24 hours when connected to a Web site. The password does not expire when the desktop application creative Cloud (what you use to install desktop applications Adobe) has signed, but a license check is required every 90 days for an annual subscription and every 30 days is one month subscription.

  Any unauthorized attempt is more complex. If a person has forgotten his password there is a password change process. Repeated attempts to sign will trigger a dialog box asking you to contact Customer Support.

  Not sure what you mean by system time-out settings. I mentioned earlier how the Web site and desktop application Cloud creative work.

  There is no access restrictions.

  Update:

  If you are going to create an Adobe ID and click in the password field, you can see a short list of password requirements.

  

• Lightroom: metadata location

  Use Lightroom 4.4 on Windows 7.  Great product, but I need help understanding metadata.  Currently, I add keywords e.g. UK, Essex, Colchester.  However, I see that the metadata has fields location on the tab "location".

  
  

  After completing these and then exported the image + metadata, I don't see the location information [e.g. using windows explore/properties].

  
  

  Issues related to the:

  Belongs to the location of information the EXIF details?

  Data location [not only GPS] are accessible by commonly used software or only within other packages from Adobe?

  What simple/free product is available to view photos and metadata of the location without using Lightroom I often send files exported to other people who do not have the software I have.

  
  

  Please I need a simple explanation or links to explain the principles involved.

  
  

  Thank you.
  

  Thanks for your reply.

  Certify that the location information that is 'delete' is not checked when I export I get the GPS info in the 'properties' - so I do not claim that Lightroom is defective or I do not necessarily a bad thing.

  It's just that I do not see the location precise details e.g. country, State, city, etc.

  I just want to understand if this detailed info [country, State, city, etc.] is stored in data exif or other associated files when exported.

  OR do I rely on the packaging of the receiver to decode the GPS data, if it can - of course software like windows Explorer does not only.

  Y at - it a single or video explanation that explains that?  Tutorial of Julieanne Kost on mapping is good, but it does not explain how/where that location information is stored.

  Thank you very much.

• VPN to Pix problem

  It seems that I have problems similar to many others in the connection of remote clients to a PIX 515E.

  Currently, I have tried both the client VPN Cisco 3.6 and 4.03 without success. Users are authenticated very well and the customer, you can see that their assigned an address etc but they are unable to access the internal network. The crypto ipsec his watch HS no encrypted traffic has affected the Pix as its...

  within the State of the customer etc., it shows that packets are encrypted so I'm at a bit of a loss.

  I have also a problem with pptp connections - this seems to differ between the BONES on the client but Win2K machines can connect and get checked etc but again failed to connect within the networks. These could be linked?

  My current config is: (change of address, etc.)

  SH run

  : Saved

  :

  PIX Version 6.2 (1)

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif ethernet2 security10 intf2

  enable password xxxx

  passwd xxxx

  hostname fw

  domain name

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol 2000 skinny

  No fixup protocol sip 5060

  names of

  name Inside_All 10.0.0.0

  name 10.30.1.0 Ireland1_LAN

  name 159.135.101.34 Ireland1_VPN

  name 213.95.227.137 IrelandSt1_VPN

  name 10.30.2.0 Cardiff_LAN

  name 82.69.56.30 Cardiff_VPN

  access-list 101 permit ip Inside_All 255.0.0.0 10.1.1.88 255.255.255.248

  access-list 101 permit ip Ireland1_LAN 255.255.255.0 255.0.0.0 Inside_All

  access-list 101 permit ip Cardiff_LAN 255.255.255.0 255.0.0.0 Inside_All

  access-list 101 permit ip Inside_All 255.0.0.0 10.30.3.0 255.255.255.0

  access-list 101 permit ip Inside_All 255.0.0.0 192.168.253.0 255.255.255.0

  outside_interface list access permit icmp any any echo

  outside_interface list access permit icmp any any echo response

  outside_interface list of access permit icmp any any traceroute

  outside_interface list access permit tcp any host 212.36.237.99 eq smtp

  outside_interface ip access list allow any host 212.36.237.100

  access-list permits outside_interface tcp host 212.241.168.236 host 212.36.237.101 eq telnet

  outside_interface list of access permitted tcp 192.188.69.0 255.255.255.0 host 212.36.237.101 eq telnet

  outside_interface list access permit tcp any any eq telnet

  allow the ip host 82.69.108.125 access list outside_interface a

  access-list 102 permit ip 10.1.1.0 255.255.255.0 Ireland1_LAN 255.255.255.0

  access-list 103 allow ip 10.1.1.0 255.255.255.0 Cardiff_LAN 255.255.255.0

  access-list 104. allow ip 10.1.1.0 255.255.255.0 10.30.3.0 255.255.255.0

  pager lines 24

  opening of session

  recording of debug console

  monitor debug logging

  interface ethernet0 10baset

  interface ethernet1 10baset

  Automatic stop of interface ethernet2

  Outside 1500 MTU

  Within 1500 MTU

  intf2 MTU 1500

  IP outdoor 212.36.237.98 255.255.255.240

  IP address inside 10.1.1.250 255.255.255.0

  intf2 IP address 127.0.0.1 255.255.255.255

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool ippool 10.1.1.88 - 10.1.1.95

  IP local pool mspool 10.7.1.1 - 10.7.1.50

  IP local pool mspools 192.168.253.1 - 192.168.253.50

  location of PDM Inside_All 255.255.255.0 inside

  location of PDM 82.69.108.125 255.255.255.255 outside

  location of PDM 10.55.1.0 255.255.255.0 inside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  public static 212.36.237.100 (Interior, exterior) 10.1.1.50 netmask 255.255.255.255 0 0

  public static 212.36.237.101 (Interior, exterior) 10.1.1.254 netmask 255.255.255.255 0 0

  public static 212.36.237.99 (Interior, exterior) 10.1.1.208 netmask 255.255.255.255 0 0

  Access-group outside_interface in interface outside

  Route outside 0.0.0.0 0.0.0.0 212.36.237.97 1

  Route inside Inside_All 255.255.255.0 10.1.1.254 1

  Route inside 10.2.1.0 255.255.255.0 10.1.1.254 1

  Route inside 10.3.1.0 255.255.255.0 10.1.1.254 1

  Route inside 10.4.1.0 255.255.255.0 10.1.1.254 1

  Route inside 10.5.1.0 255.255.255.0 10.1.1.254 1

  Route inside 10.6.1.0 255.255.255.0 10.1.1.254 1

  Route inside 10.7.1.0 255.255.255.0 10.1.1.254 1

  Route inside 10.8.1.0 255.255.255.0 10.1.1.254 1

  Route inside 10.9.1.0 255.255.255.0 10.1.1.254 1

  Route inside 10.10.1.0 255.255.255.0 10.1.1.254 1

  Route inside 10.11.1.0 255.255.255.0 10.1.1.253 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout uauth 0:00:00 uauth absolute 0:30:00 inactivity

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  AAA-server AuthInOut Protocol Ganymede +.

  AAA-server AuthInOut (inside) host 10.1.1.203 Kinder timeout 10

  the AAA authentication include http outside 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 AuthInOut

  the AAA authentication include http inside 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 AuthInOut

  AAA accounting include http outside 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 AuthInOut

  AAA accounting include http inside 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 AuthInOut

  Enable http server

  http 82.69.108.125 255.255.255.255 outside

  http 10.1.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server SNMP community xxx

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Sysopt connection permit-pptp

  Sysopt route dnat

  Crypto ipsec transform-set esp - esp-md5-hmac VPNAccess

  Crypto ipsec transform-set esp-3des esp-md5-hmac VPNAccess2

  Crypto-map dynamic dynmap 10 game of transformation-VPNAccess2

  card crypto home 9 ipsec-isakmp dynamic dynmap

  card crypto ipsec-isakmp 10 home

  address of 10 home game card crypto 102

  set of 10 House card crypto peer IrelandSt1_VPN

  House 10 game of transformation-VPNAccess crypto card

  card crypto ipsec-isakmp 15 home

  address of home 15 game card crypto 103

  set of 15 home map crypto peer Cardiff_VPN

  House 15 game of transformation-VPNAccess crypto card

  card crypto ipsec-isakmp 30 home

  address of 30 home game card crypto 104

  crypto home 30 card set peer 212.242.143.147

  House 30 game of transformation-VPNAccess crypto card

  interface card crypto home outdoors

  ISAKMP allows outside

  ISAKMP key * address IrelandSt1_VPN netmask 255.255.255.255

  ISAKMP key * address Cardiff_VPN netmask 255.255.255.255

  ISAKMP key * address 212.242.143.147 netmask 255.255.255.255

  ISAKMP identity address

  part of pre authentication ISAKMP policy 5

  ISAKMP strategy 5 3des encryption

  ISAKMP strategy 5 md5 hash

  5 2 ISAKMP policy group

  ISAKMP life duration strategy 5 86400

  part of pre authentication ISAKMP policy 7

  ISAKMP strategy 7 3des encryption

  ISAKMP strategy 7 sha hash

  7 2 ISAKMP policy group

  ISAKMP strategy 7 life 28800

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 1 ISAKMP policy group

  ISAKMP policy 10 life 85000

  part of pre authentication ISAKMP policy 20

  encryption of ISAKMP policy 20

  ISAKMP policy 20 md5 hash

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 85000

  vpngroup client address mspools pool

  vpngroup dns-server 194.153.0.18 client

  vpngroup wins client-server 10.155.1.16

  vpngroup idle time 1800 customer

  vpngroup customer password *.

  Telnet 82.69.108.125 255.255.255.255 outside

  Telnet 10.55.1.0 255.255.255.0 inside

  Telnet 10.1.1.0 255.255.255.0 inside

  Telnet timeout 15

  SSH 82.69.108.125 255.255.255.255 outside

  SSH timeout 15

  VPDN Group 6 accept dialin pptp

  PAP VPDN Group 6 ppp authentication

  VPDN Group 6 chap for ppp authentication

  VPDN Group 6 ppp mschap authentication

  VPDN Group 6 ppp encryption mppe auto

  VPDN Group 6 client configuration address local mspools

  VPDN Group 6 pptp echo 60

  local 6 VPDN Group client authentication

  VPDN username xxxx password *.

  VPDN username password xxx *.

  VPDN username password xxx *.

  VPDN username password xxx *.

  VPDN username xxxx password *.

  VPDN allow outside

  username xxx pass xxx

  Terminal width 80

  Cryptochecksum:8f8ceca91c6652e3cc8086edc8ed62fa

  : end

  If you do not see decrypts side Pix while my thoughts are (for IPSEC) ESP and GRE (for PPTP) do not get to your Pix (blocks perhaps of ISP or other devices).

  If you do a "capture" of the packets on the external interface you see all traffic ESP or GRE? Where the customer? If this isn't the case, dialup is ESP or permitted GRE?

• ping for the pix vpn problem

  Hello

  I got a pix 501 (6.3 - 4) on a local network and try to use Cisco VPN Client (4.0.2-D) on a remote pc.

  I can open a vpn session.

  I can't ping from the remote pc to the LAN

  I can ping from any station on the LAN to the remote pc

  After that I did a ping of a station on the LAN to the remote pc, I ping the remote computer to the local network.

  I am so newb, trying for 2 days changing ACLs, no way.

  I must say that I am in dynamic ip wan on the local network and the remote pc.

  Any idea about this problem?

  Any help is welcome.

  Here is the configuration of my pix:

  6.3 (4) version PIX

  interface ethernet0 10baset

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password * encrypted

  passwd * encrypted

  pixfirewall hostname

  domain ciscopix.com

  clock timezone THATS 1

  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  correction... /...

  fixup protocol tftp 69

  names of

  name 192.168.42.0 Dmi

  inside_access_in ip access list allow a whole

  inside_outbound_nat0_acl ip access list allow any 192.168.229.0 255.255.255.0

  outside_cryptomap_dyn_20 ip access list Dmi 255.255.255.0 allow 192.168.229.32 255.255.255.224

  access-list outside_cryptomap_dyn_20 allow icmp a whole

  pager lines 24

  opening of session

  logging trap information

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside the 209.x.x.x.255.255.224

  IP address inside 192.168.42.40 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool dmivpndhcp 192.168.229.1 - 192.168.229.254

  location of PDM 192.168.229.1 255.255.255.255 outside

  209.165.x.x.x.255.255 PDM location inside

  209.x.x.x.255.255.255 PDM location outdoors

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Route outside 0.0.0.0 0.0.0.0 209.165.200.225 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  Dmi 255.255.255.0 inside http

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  TFTP server inside the 192.168.42.100.

  enable floodguard

  Permitted connection ipsec sysopt

  AUTH-prompt quick pass

  AUTH-guest accept good

  AUTH-prompt bad rejection

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  Dynamic crypto map dynmap 20 match address outside_cryptomap_dyn_20

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 20

  ISAKMP policy 20 3des encryption

  ISAKMP policy 20 chopping sha

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  vpngroup address dmivpndhcp pool dmivpn

  vpngroup dns 192.168.42.20 Server dmivpn

  vpngroup dmivpn wins server - 192.168.42.20

  vpngroup dmivpn by default-field defi.local

  vpngroup idle 1800 dmivpn-time

  vpngroup password dmivpn *.

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  VPDN username vpnuser password *.

  VPDN allow outside

  VPDN allow inside

  dhcpd address 192.168.42.41 - 192.168.42.72 inside

  dhcpd lease 3600

  dhcpd ping_timeout 750

  Terminal width 80

  Cryptochecksum: *.

  Noelle,

  Add the command: (in config mode): isakmp nat-traversal

  Let me know if it helps.

  Jay

• Road by default from version 6.3 PIX IPsec tunnel

  We have a PIX 501 running IOS version 6.3.1.

  There are currently 3 tunnels IPsec active as described below.

  What we would like is to have all traffic by default (0.0.0.0 0.0.0.0) range out through the tunnel of the middle line so that traffic can be protected by a firewall on the other side of the tunnel.  Since ICF is a Sonicwall what would be needed to be changed in the configuration on the PIX to get there?

  Thank you

  6.3 (1) version PIX

  interface ethernet0 10baset

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the 86AZXXmRLxfv/oUQ encrypted password

  86AZXXmRLxfv/oUQ encrypted passwd

  Site A hostname

  domain default.int

  clock timezone STD - 7

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  name 75.75.75.2 CovadHub

  name 75.48.25.12 Sonicwall

  access-list 101 permit ip 10.10.5.0 255.255.255.0 10.10.1.0 255.255.255.0

  access-list 101 permit ip 10.10.5.0 255.255.255.0 10.10.2.0 255.255.255.0

  access-list 101 permit ip 10.10.5.0 255.255.255.0 10.10.3.0 255.255.255.0

  access-list 101 permit icmp any any echo response

  access-list 101 permit icmp any any echo

  access-list 102 permit ip 10.10.5.0 255.255.255.0 10.10.2.0 255.255.255.0

  access-list 103 allow ip 10.10.5.0 255.255.255.0 10.10.1.0 255.255.255.0

  access-list 104. allow ip 10.10.5.0 255.255.255.0 10.10.3.0 255.255.255.0

  pager lines 24

  opening of session

  monitor debug logging

  logging warnings put in buffered memory

  ICMP allow 10.10.5.0 255.255.255.0 inside

  Outside 1500 MTU

  Within 1500 MTU

  external IP 75.25.14.2 255.255.255.0

  IP address inside 10.10.5.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 10.10.5.0 255.255.255.0 inside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  allow icmp a conduit

  Route outside 0.0.0.0 0.0.0.0 75.25.14.1 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  NTP server 132.163.4.102 source outdoors

  NTP server 129.7.1.66 source outdoors

  Enable http server

  http 10.10.1.0 255.255.255.0 inside

  http 10.10.5.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp - esp-md5-hmac pix11

  peer11 card crypto ipsec-isakmp 10

  correspondence address 10 card crypto peer11 102

  peer11 card crypto 10 peers set 75.95.21.41

  peer11 card crypto 10 set transform-set pix11

  11 peer11 of ipsec-isakmp crypto map

  correspondence address 11 card crypto peer11 103

  11 peer11 peer Sonicwall crypto card game

  card crypto peer11 11 set transform-set pix11

  12 peer11 of ipsec-isakmp crypto map

  correspondence address 12 card crypto peer11 104

  card crypto peer11 12 set peer 75.62.58.28

  card crypto peer11 12 set transform-set pix11

  peer11 interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address 75.62.58.28 netmask 255.255.255.240

  ISAKMP key * address netmask 255.255.255.224 Sonicwall

  ISAKMP key * address 75.95.21.41 netmask 255.255.255.252

  ISAKMP identity address

  ISAKMP keepalive 10

  ISAKMP nat-traversal 20

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  part of pre authentication ISAKMP policy 11

  encryption of ISAKMP policy 11

  ISAKMP policy 11 md5 hash

  11 2 ISAKMP policy group

  ISAKMP duration strategy of life 11 28800

  part of pre authentication ISAKMP policy 12

  encryption of ISAKMP policy 12

  ISAKMP policy 12 md5 hash

  12 2 ISAKMP policy group

  ISAKMP duration strategy of life 12 36000

  Telnet 10.10.5.0 255.255.255.0 inside

  Telnet 0.0.0.0 0.0.0.0 inside

  Telnet timeout 5

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH 0.0.0.0 0.0.0.0 inside

  SSH timeout 60

  Console timeout 0

  dhcpd address 10.10.5.70 - 10.10.5.101 inside

  dhcpd dns 10.10.1.214

  dhcpd rental 43200

  dhcpd ping_timeout 750

  dhcpd field default.int

  dhcpd outside auto_config

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:36d2c26afa8

  03957d 3659

  868d9219f8

  2

  : end

  Hello

  You do not configure really any type of default route for the VPN L2L. You match rather traffic with 'everything' destination on configuring VPN L2L. Basically you would like to configure the VPN L2L ACL encryption with the 'whole' destination map

  I guess in your case it would be the ACL named "103".

  access-list 103 allow ip 10.10.5.0 255.255.255.0 any

  IP 10.10.5.0 doesn't allow any access list 103 255.255.255.0 10.10.1.0 255.255.255.0

  Naturally, your NAT0 ACL configuration should also reflect this change. I guess the end remote Sonicwall'd private NAT to public Internet access in this case whereas. I guess that in this case, the ACL NAT0 might even be just this one rule ACL

  access-list 101 permit ip 10.10.5.0 255.255.255.0 any

  BUT what I was asking however for now mainly is the fact it has a priority of '11' in the 'crypto map' which has between 2 other L2L VPN connections.

  peer11 card crypto ipsec-isakmp 10

  correspondence address 10 card crypto peer11 102

  peer11 card crypto 10 peers set 75.95.21.41

  peer11 card crypto 10 set transform-set pix11

  11 peer11 of ipsec-isakmp crypto map

  correspondence address 11 card crypto peer11 103

  11 peer11 peer Sonicwall crypto card game

  card crypto peer11 11 set transform-set pix11

  12 peer11 of ipsec-isakmp crypto map

  correspondence address 12 card crypto peer11 104

  card crypto peer11 12 set peer 75.62.58.28

  card crypto peer11 12 set transform-set pix11

  If you have changed the destination address of '103' crypto VPN L2L ACL at "" I guess that would probably cause so that the last connection VPN L2L with "12" priority may stop working since the previous connection already corresponds to 'all' your network 'inside' destination address.

  The solution might be to delete the current configuration of the '11' priority and add it with '13' for example, so that the other 2 connections VPN L2L could continue to work and all the rest of the traffic would be passed to the connection VPN L2L with Sonicwall as the remote peer.

  No crypto map ipsec-isakmp 11 peer11

  no correspondence address 11 card crypto peer11 103

  no set of 11 peer11 card crypto don't peer Sonicwall

  No peer11 11 set transform-set pix11 crypto card

  13 peer11 of ipsec-isakmp crypto map

  correspondence address 13 card crypto peer11 103

  13 card crypto peer Sonicwall peer11 game

  card crypto peer11 13 pix11 transform-set game

  I have to say that this is how I expect it should work. I worked with VPN L2L that have been configured in this way but its quite rare.

  If you want to try something like that, of course, be ready to return to the old configuration with your admins of the remote peer, if things do not work. I guess more difficult configurations changes must be made on the remote end while your configuration of the ends should be fairly simple.

  Hope this helps

  -Jouni