Location of snapshot?
I took a snapshot of photo on a document. I received a message that it has been copied successfully, however, I'm not. Where is the snapshot that has been saved? Thank you!
He could have saved to the Clipboard. So, please paste into another application like paint, etc.
Kind regards
Ana Maria
Tags: Acrobat
Similar Questions
-
Anyone know if you can change the default location where snapshots are saved on data warehouses?
Yes you can.
Please take a look at my answer to this topic: Re: snapshot to a different data store
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
Is there a process to move the location of the snapshot files?
Snapshots can potentially occupy a large amount of disk space. We would like to set up a data bank separated only for snapshot files.
Is this possible?
Assuming it is, it's a reasonable thing to want to do?
Welcome to the forums,
Take a look at Eric Sieberts Astuce: http://vmware-land.com/Vmware_Tips.html#ESX1
I'd tell that to use moderate of the snapshot. And 20 percent of free space on a volume of taking snapshots. Don't let not the snapshot is active for days and days, validation and use.
Duncan
VMware communities user moderator
-
-
Location of snapshot and 'owner '.
I'm pretty new to powershell and have met with this script (below) to collect information from snapshot. However, what the script does not do is give me the location of data store for each reported snapshot, or, the 'owner' of the snapshot based on the folder that the virtual machine is located in the CR. Has anyone out there collected this information before? Any suggestions are welcome. Thank you
function {Generate-report
Write-Output ".» Error {color: #FF0000; make-weight: bold;}. Title . "Normal ().
{Foreach ($snapshot to $report)
Write-Output ".VC report
Name of the virtual machine
Name of the snapshot
More than 24 hours
Host
Data store
Owner
$($snapshot.vm)
$($snapshot.name)
$($snapshot.created)
$($snapshot.host)
"
}
Write-Output "."
}
$username = "#"
$password = "#"
$ServerList = ' # '.
*$Report = @)
{foreach ($server in $serverlist)
If ($server - eq 'VCServer') {Connect-VIServer $server}
else {$server Connect-VIServer-user $username - password $password}
Get - vm | Get-snapshot | %{
$Snap = {} | Select the virtual machine name, created, host
$Snap.VM = $_.vm.name
$Snap.Name = $_.name
$Snap.Created = $_.created - lt (Get-Date). AddDays(-20)
$Snap.Host = $_.vm.host.name
$Report += $Snap
}
}
Connect-VIServer is called in the loop who crosses all servers in $ServerList.
In the script below, I moved the Connect-VIServer out of the loop when it comes to the "VCServer.
There was a statement of table rows missing at the beginning of the line where the snapshot data is written.
function Generate-Report { Write-Output "
" Write-Output "
" } $username = '######' $password = '#######' $ServerList = "########" $Report = @() if ($server -eq "VCServer"){Connect-VIServer $server} foreach ($server in $serverlist){ if ($server -ne "VCServer") {Connect-VIServer $server -user $username -password $password} get-vm | get-snapshot | % { $Snap = {} | Select VM,Name,Created,Host, DSdir $Snap.VM = $_.vm.name $Snap.Name = $_.name $Snap.Created = $_.created -lt (Get-Date).AddDays(-20) $Snap.Host = $_.vm.host.name $vm = Get-View -Id $_.VM.Id foreach($snaptree in $vm.Snapshot.RootSnapshotList){ if($snaptree.Name -eq $_.Name){ $sn = Get-View $snaptree.Snapshot $Snap.DSdir = $sn.Config.Files.SnapshotDirectory } } $Report += $Snap } } Generate-Report > "C:\Temp\test.htm"VC report " foreach ($snapshot in $report){ Write-Output "VM Name Snapshot Name Older than 24 Hours Host Datastore Owner " } Write-Output "$($snapshot.vm) $($snapshot.name) $($snapshot.created) $($snapshot.host) $($snapshot.DSdir) -
You can change the location of snapshot?
I would like to make my Drobo my instant deposit. Is this possible?
mcvosi wrote:
I would like to make my Drobo my instant deposit. Is this possible?
Take a look on: Re: SnapShot on external drive USB
-
change snapshot controlfile name
We use CARS.
When I try to display the place of location of snapshot controlfile to catalog database and the target (as a sys) in a locaton shared the instance to help
RMAN > configure snapshot controlfile name to ' / oracle/test_flash/ASYST/backupset/p1/snapcf_ASYST.f';
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command configure at 01/09/2013 02:23:12
RMAN-03014: implicit recovery catalog Resync failed
RMAN-03009: resync command failed full to the default channel to 01/09/2013 02:23:12
ORA-01580: error creating control file backup /f37back/oradata/flash_recovery_area/EDBT/backupset/p1/snapcf_EDBT.f
ORA-27040: create file error, cannot create the file
Linux-x86_64 error: 2: no such file or directoryBut when I connect to the target system database and run the below, the location of the controlfile bud
Sys@ASYST1 > RUN SYS. DBMS_BACKUP_RESTORE. CFILESETSNAPSHOTNAME('/Oracle/test_flash/ASYST/backupset/P1/snapcf_ASYST.) F') ;PL/SQL procedure successfully completed.
What is the difference between the two?
It seems that the * supported * the RMAN command line method tries to create the snapshot controlfile while the * not taken in charge * the PLSQL API method does not attempt to do so.
Who do you prefer to use, one that is taken in charge or one that is not documented, not supported?
Hemant K Collette
-
How to create the snapshot to the remote data store?
Hi all.
I have esxi 4.1 now if I run the snapshot in the snapshot file created on the host server, but I want to create the file snapshot directly to remote NAS. Can I do this?
Thanks in advance.
best account.
Dan.
check this, you can set a different location of snapshot: http://blog.vmpros.nl/2009/05/14/vmware-creating-snapshots-in-a-different-location-than-default-virtual-machine-directory-1002929/
-
Another instant storage location
Hi experts,
We currently have a virtual environment with daily snapshots running on all virtual machines. I got two part question.
1. where the snapshots are kept?
2. is there a way to change the location of snapshots. At the end of the day, I want snapshots to be stored on a storage on its own device.
I don't know if that makes sense... :|
Thank you!
Kevin
As other posters mentioned, instant should only be retained as long as necessary.
1. where the snapshots are kept?
By default snapshots are stored in the home folder of the virtual machine. No matter where you place the vmdk.
2. is there a way to change the location of snapshots. At the end of the day, I want snapshots to be stored on a storage on its own device.
Yes, it is possible to set a different location (http://kb.vmware.com/kb/1002929), but I think you won't be happy with what you're trying to do. This is because the snapshots in VMware are chained with the base vmdk disk. In other words, during the race, a virtual machine with all the shadow copies are used by the virtual machine. Therefore, you must place the snapshots on the same storage preference. See http://kb.vmware.com/kb/1015180
I don't know if that makes sense... :|
I think that it is not.
André
-
VM with disks of different data warehouses. Snapshots on the same data store?
Hello
We have several virtual machines with disks on different data stores for reasons RAID.
Last night, we found that the snapshots of all disks are left on the data store main vmx and not on each datastore disk.
How will we change this as our OS data warehouses are small and run out of space when running shadow copies?
Thank you
Frogbeef
You can change the location of snapshots, but they will all go to this place - as far as I know, you cannot change the location of each disk.
The KB http://kb.vmware.com/kb/1002929 explains how to do this.
Kind regards
Marcelo Soares
VMWare Certified Professional 310/410
Master virtualization technology
Globant Argentina
Review the allocation of points for "useful" or "right" answers.
-
Get a message from catastrophic failure with error 0x8000FFFF on backup code
Original title: I get a message of catastrophic failure.
Error code 0x8000FFFF while trying to backup files every time. What should I do about it?
Hi granniewilsey,
This problem occurs because the backup process detects that the system drive is dirty.
Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive, and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.
To resolve this problem, run the disk check to fix the error on the system drive. To do this, follow the steps mentioned in the article below:
Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".
http://support.Microsoft.com/kb/973558
Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
My files fail to back up automatically. I get an error code: FAILURE SIGNS: 0x8000FFFF. Someone knows how to fix this?
Hello
1. you have Windows Vista Service Pack 1 installed on your computer?
2. have you done any software or hardware changes on your computer before this problem?3. you make a system image backup?This problem occurs because the backup process detects that the system drive is dirty.Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive, and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".
http://support.Microsoft.com/kb/973558
Note: CHKDSK.exe would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Hope the information is useful. -
Catastrophic error when I try to back up my files
When I try to back up my files, I cannot and I get a catastrophic error response. What, if any, are my options?
Hello
1. have you tried the suggestions posted earlier?
This problem occurs because the backup process detects that the system drive is dirty.Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive, and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.
To resolve this problem, run the disk check to fix the error on the system drive. To do this, follow the steps mentioned in the article below:
Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".
http://support.Microsoft.com/kb/973558Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Thank you, and in what concerns: -
Error "failure 0x8000FFFF catastrophic" when running on Vista computer backup system
Original title: you try to run the backup.
You save stopped running, catastrophic failure 0x8000FFF error message.Hello
This problem occurs because the backup process detects that the system drive is dirty.
Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive.
and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.Refer to this article and follow the steps to solve the problem:
Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)":
http://support.Microsoft.com/kb/973558Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers Feedback Forum and tell us what you think. -
access error code 0x80070005 and a catastrophic failure of the code ox8000fff
I have SEVERAL issues w / pc - get a catrostrophic 0x8000fff error code when I try to back up files and get access denied when you try to do a restore system 0 x 80070005 and I'm having a time hard w / updates and windows defender turns along w / protection system
Hi JessicaR1,
Question: 0x8000fff
This problem occurs because the backup process detects that the system drive is dirty. Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive, and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.
Follow the steps in the article to resolve the problem.
http://support.Microsoft.com/kb/973558
Question: 0x80070005
Try to perform a system restore and see if that solves the problem.
See the link below for more information on uninstalling programs:
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-programIf the steps above do not help, try to do a restore system from safe mode and check if it works very well.
Check out the link for more information on starting your computer in SafeMode below:Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeTry these steps and let us know the result.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Error on VM VSS. ID 12289.
We have a server2008R2 SP 1 windows VM that is backup takes via vcenter.
But we do not take backup of the server. I need to know this error due vcenter.
Here is the error:
The volume shadow copy Service error: unexpected error DeviceIoControl (\\?\fdc#generic_floppy_drive#6 & 2bc13940 & 0 & 0 # {53f5630d-b6bf-11d0-94f2-00a0c91efb8b}-0000000000000464, 0 x 00560000, 0000000000000000, 0, 0000000000332 has 00, 4096, [0]). HR = 0 x 80070001, incorrect function.
.
Operation:
Expose the recovered Volumes
Location of snapshot Lun
PostSnapshot event
The execution of an asynchronous operation
Context:
Device: \\?\fdc#generic_floppy_drive#6 & 2bc13940 & 0 & 0 # {53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
Examining the detected Volume: existing - \\?\fdc#generic_floppy_drive#6 & 2bc13940 & 0 & 0 # {53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
Execution context: provider
The provider name: provider of VMware snapshot
The provider version: 1.0.0
Provider ID: {564d7761-7265-2056-5353-2050726f7669}
I found the below KB article about errors are caused in the Virtual Machine. To resolve this problem, we need to improve the existing, esxi hosts.
Thank you
Maybe you are looking for
-
Hello. Milestone 2 my girlfriend is very strange and guard restart constantly because of random crashes. I want to try to do a factory reset, but I can not far enough in the settings to the factory reset option so that the only way is through the rec
-
I use windows vista ultimateUpdate for windows vista (KB958623) security code error 80070490Update for windows vista (KB943411) 8024200d error code Help me?
-
URGENT - recent update changed screen - all height & skinny
My monitor is square. How can I change the display back as it was so it fits on the screen? The text is very difficult to read and scroll to the low bar is off the screen completely.
-
Hello! I had a problem of design. I did something I thought I would work, but I think that I am so close to get it. I have 2 is the image I updated my EditField as boder when unfocus the image has a WHITE background and what door another color. I hav
-
Photos app says "Save as" instead of "Save a Copy".
Previously, I could 'Save a copy' when editing photos from my SD card. He would then store the picture on the SD card. Now, it only let's me "save under" and I have to name the file, so there is an extra step. The edited photo IS NOT store on the SD