VM with disks of different data warehouses. Snapshots on the same data store?
Hello
We have several virtual machines with disks on different data stores for reasons RAID.
Last night, we found that the snapshots of all disks are left on the data store main vmx and not on each datastore disk.
How will we change this as our OS data warehouses are small and run out of space when running shadow copies?
Thank you
Frogbeef
You can change the location of snapshots, but they will all go to this place - as far as I know, you cannot change the location of each disk.
The KB http://kb.vmware.com/kb/1002929 explains how to do this.
Kind regards
Marcelo Soares
VMWare Certified Professional 310/410
Master virtualization technology
Globant Argentina
Review the allocation of points for "useful" or "right" answers.
Tags: VMware
Similar Questions
-
Size of snapshot for VM with disks of different data warehouses
Hi all
We create a VM with drives C and D residing on different data stores. Size of drive C would be 30 GB and D would be 250 GB.
When we take a snapshot of the virtual machine where it will be stored on C or D drive please confirm so we can design the size of the store of data accordingly.
Kind regards
Khurram Shahzad
Snapshot is taken for both C & D drives,
Instant c: drive will be in the data store where c: drive. Instant drive D will be in the data store were the unit.
-
How to select different data store for the snapshot
Hello
I connected with two data store ESXi 4 server. First data store is a local raid-5 HD and the second data store is a netgear NFS nas.
virtual machines are stored on the local data store. I want to archivie snapshot for my virtual machine to use the second (nas NFS) data store. I tried to snapcho, but the disk data store is used is always the local.
can I select a different data store to store the snapshot files?
Thank you
http://KB.VMware.com/kb/1002929 could help...
/ Rubeck
-
Snapshot of a different data store
Hello
Quick question for the community.
Suppose I have 2 data warehouses and A VM is located in the data store 1. I can take a snapshot of the machine and I have this snapshot can be found on the data store 2?
My understanding was I could not easily do this but our service provider said that's the way it works and I'll try to find a documented method, support to do so.
All responses will be appreciated.
Kind regards
Richard
Incorrect, it is advisable, and applies by default to store the snapshots in the same data store in which the VMDK resides in, but he did not.
You can edit the .vmx VM to store snapshots on a different data store, this can be useful if you run lack of space on the data store, which resides in your virtual machine.
Please refer to this VMware KB on the configuration of this change: http://kb.vmware.com/kb/1002929
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
How can I move a data store a single virtual disk shape in a different data store?
I have a host running vSphere 4 enterprise that belongs to a cluster of Foundation vCenter 5.5. I need to move all the guests off the coast of this host to be updated. This host has a client that is using the local hard disk as a data store. This customer has six 6 hard drive with only using the local hard disk as a data store. How can I move the hard drive to a different data store?
When I try to use 'Move' or 'Migrate' with vCenter (client or web interface), it seems that I can move only data not store a single entity, each database individually. Can we move a data store single someway with the guest always under tension, or do I have to power off and manually move the "vmdk" they reattach the hard drive?
Thank you
Bruce
When you click on migrate, the data store, click on the Advanced button. It will give you the option to select a disc. You can migrate it while it is running.
-
Migration of all the catalog items to a different data store in the same storage profiles
Hello
is any possibility to migrate everything in the catalog (time and iso files) to a different data store that has the same profile (Silver) storage group? Because I have 2 groups of data store with the same profile of storage (Silver) and I want to delete one of this cluster.
I found this kb: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2058094 but it speaks solely of media files of migration between different storage profiles.
Have vCD 5.6.4
You happen to use rapid Provisioning? This is probably the only problem I can think of.
Environments that have no linked Clones or shadows created from them, you can just Storage vMotion them between the same storage policy data warehouses. Just make sure that the data store or a store of data clusters are visible in vCloud Director first of all in the framework of this storage policy.
When you use linked clones, I don't remember the exact process... I think that I have in my office somewhere (I'm at home now).
-
How to move a virtual machine to a different data store, preserving its ID
I would like to move a virtual machine to a different data store.
Because I use 3rd party software that identifies a virtual machine by its ID of VirtualCenter, I'd like to preserve the ID, and I also want to preserve the name of the virtual computer.
If I clone the virtual machine, I lose the ID and name.
I can clone a second time to restore the name, but the ID is always false.
I know that I can use vmkfstools-i to copy the entire disk.
Is it possible to copy the entire VM?
I am currently on ESX 3.0.2/VC 2.0.2
The operation that I describe is available in 3.5.x/VC ESX 2.5.x
TIA,
-Magister
Don't use EVER of CP to copy a VM, VMDK move/copy should be used in conjunction with vmkfstools as best practice.
OP,
You can manually make a copy using the CLI interface or use the VI Client and browse the data store and to copy and paste in the appropriate data and as suggested Andre store, when you switch on for the first time, you should say 'keep' when asked if you want to update the virtual machine UUID.
Another thing, you could do, is if you've enabled for vMotion, you can actually use Storage vMotion which will migrate directly from your virtual machine to a different data store, it's less effort on your side and you can count on Andrew Kutz sVMotion plugin: http://sourceforge.net/projects/vip-svmotion/
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
Is Microsoft Failover Cluster ESXi 4.1 Shared Disk of NFS data store, it supported?
We have a request from MS Failover Cluster configuration on Windows 2008 R2 2 guests with a storage shared for a web application. However, there is no VMFS storage of data or the ability of the CF to presending RDM. So, I created the disks shared on a NFS datastore using option "Setup for Failover Clustering and Microsoft Cluster Service" and have added the cluster disk and tested successful failover.
But the MS cluster validation control cancelled storage and I want to know if that configuration is not taken because of supported.
A notice would be useful.
We are also working on setting up a cluster of ESXi for iSCSI storage, which can be leveraed for this purpose.
Shyam-
Its not supported.
4.1, your only options supported are:
- CF storage with pRDMs
- iSCSI storage with initiators guest.
-
Cloning of VM/TIME to the different data store
Hi all
I am working out scripts excellent clone of Ruben garcia and one thing I'm trying to add is to have the VAPP created on a different data store.
# Clone and move virtual machines{foreach ($vm to $vms)$vm = $vm | Get-opinion$vmname = $cloneName + "»" + $vm.name ". \LcloneVM $vm.name - cloneName '$vmname' - «$PortGroup» PortGroupGet-vm-name $vmname | Move-vm-destination $vapp;The virtual machine are getting cloned and then inserted in the passed TIME as a parameter name, but I can't understand how do to have the VAPP will be created on a data store that I specify. At this time the vApp is created on the same data store where the linked clones. Can I travel after from the user interface by using the migrate command but I want if possible to automate it.I thought that the next line should work but the VAPP fails when creating, so the move-vm command fails later.# Create VAPP$vapp = $host_name | VAPP-new-name "$cloneName" - data store "ThinDiskTesting"I am at a loss to what im doing wrong
Post edited by: BrianRTS - difficulty of setting in the form
You can specify the data store where you want to create linked clone delta files.
This requires a slight modification to the script of Ruben
# Generate specs for clone $cloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec $cloneSpec.Snapshot = $sourceVM.Snapshot.CurrentSnapshot $cloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec $cloneSpec.Location.DiskMoveType = [Vmware.Vim.VirtualMachineRelocateDiskMoveOptions]::createNewChildDiskBacking $cloneSpec.Location.Datastore = (Get-Datastore -Name $tgtDatastoreName).ExtensionData.MoRef
Ownership of the data store is used to indicate where the clone should be placed.
Or you want to create the clones, then move them?
-
Hi all
I have a problem during VM migration live in the different data store, the specifications of the virtual machine is just Windows 2003 x 64 installed with the latest VMWare tools.
Here is the error message:
Move the virtual machine
Win2003x64_RST01
A general error occurred: detected Source this destination could not resume.
The active state of VM migration
any idea what could cause this please?
Kind regards
AWT
Check that the machine ESX4 has prevention performance virtualization and data, indicators enabled in the BIOS. I could move 32 bit machines vmotion Unflagged VT turned on in the BIOS, but 64-bit machines could not begin until I activated the flag of VT in the BIOS.
Also try to clear the mask of the source of the VM CPU before migrating, providing the hosts have the same hardware.
-
Clone &; new Config on the different data store
Hi all
I had a problem where the user try to clone or create a new configuration where the original VM model are stored is full.
When the data store is almost full, I turn off the "VM creation" in the section resources, I would do this or the LM will be able to use the different data store? otherwise how can I config for the user can store data different from Julie then create a new configuration or a clone.
Thank you
Error message here: -.
* "Clone VM" operation cannot be performed because the data store 'VMFS02' is not
Enabled.* yes I disable 'VM Creation' resources because of this LUN is almost exhausted.
In this case, you must use SSmove to migrate the entire tree of virtual machines from a store of data with more free space
-
To a different data store of VSs
I need to create a job to move VMs from a different data store.
I've created a script like the following:
Add-PSSnapin VMware.VimAutomation.Core
SE connect-VIServer x.y.z.t - username
$target = "Datastore2".
$listaVM =
"VM1."
"VM2."
"VM3,
"VM4."
"VM5."
"VM6".
{foreach ($vm to $listaVM)
$vm
Get-VM-name $vm | Move-VM - Datastore $target - DiskStorageFormat 'thin '.
}
The work seems to work but I need to improve so that:
- After launching the command VM1, it waits until the move is completed
- If VM2 cannot be moved for some reason any the ongoing process in process VM3
- After processing each VM I get information on the status of the move (success, error,...)
Can someone please help?
Concerning
Marius
Try something like this
The RunAsync will start moving in the background, then the While loop waits until the move is completed.
The Task object, the status of the move is obtained.
Add-PSSnapin VMware.VimAutomation.Core
SE connect-VIServer x.y.z.t - username
$target = "Datastore2".
$listaVM =
"VM1."
"VM2."
"VM3,
"VM4."
"VM5."
"VM6".
foreach ($vm in Get-VM-name $listaVM) {}
$job = move-VM - VM $vm - $target - DiskStorageFormat "Thin" - RunAsync Datastore
While ($job. PercentComplete - do 100)
{
sleep 5
$job = get-job | where {$_.} ID - eq $job. ID}
}
Write-Host "$($job.)". Result) is migrated, status $($job.) State).
}
-
Impossible to migrate from windows 2008 to the different data store
Hai
When I try to migrate the computer to the different data store I get the error
"[error caused by file hard to]."
Thank you
Concerning
R.Ramji
Hello
first move this virtual machine to another host and try to migration of storage. still, the problem you then close restarts the virtual machine host and try storage vmotion.
It should work. If the problem continues after the error log.
-
Original title: DVD RW drive
I'm having a problem with my computer toshiba M645. When I insert my recovery disk its Blanck, but if I used the same disc in another computer I can see the contents inside. I try inserting the disk dvd movies and it will play normally. Please give me help with this problem because I want to get my phone to the sound out of the box state. Thank you.
Hello
The drive came with the laptop or you did it yourself in the recovery Partition?
And you're supposed to boot from the recovery disc to start the recovery process.
You change the Boot order to make the CD/DVD drive first in the boot order. Then, you start from the disc.
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
And as a way to re - install with most of the Toshibas, you press 0 (zero) to start to start the process of recovery back to settings factory (new State) of the recovery Partition.
See you soon.
-
Switch issues. Help, please.
How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.
-Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
-Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
-Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.Thanks in advance for any assistance that you can provide and Merry Christmas to you all.
It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router. In addition, what is the model of the switch?
To save the manual copy and the new hits of the ipconfig/all command output-
First connect through switch.
Open a command prompt window (start > run > cmd > OK)
Type the following lines in the black command prompt window and press ENTER after each lineecho "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line
echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
Notepad '% UserProfile%\Desktop\ipinfo.txt '.
outputCopy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.
You can delete ipinfo.txt on the desktop when you are finished.
Maybe you are looking for
-
When the option 'request to activate'-'You Tube' blocks Flash from Adobe, but 'request to activate' is no longer on Yahoo Home Pageappear (to DATE). When I chose 'never activate', even the car of You Tube active! Also, I noticed there is an add-on sp
-
When I open firefox I get pacman sounds in the background...
I opened my firefox as usual, and when I do, any page I go, I always get the sounds of pacman. There are no pop ups open and internet Explorer seems to work very well. This has happened Each time Firefox opened Today 05/21/10 User Agent Mozilla/4.0 (
-
Satellite U400 - fan is always on in Windows
Hello I have the same problem on U400. Tried what MasterG suggested but it did not help... I've got dual boot Windows 7 pro / Ubuntu 9.10 into Ubuntu fan starts when the temperature is more work then 69 ° C and stop at 55 ° C. But in Windows, tempera
-
HP Laserjet Pro 1102w: printer recorded more than once how can I remove the extra
An attempt to get this printer to print, I registered several times in the same printer. I want to dele dupes. How?
-
HP Pavilion a6000: hp Pavilion a6000 ethernet driver windows 764-bit
I'm looking for driver ethernet to the desktop hp Pavilion a6000 for windows 7 64-bit, no idea how cn I download this driver.