Location of the firmware and the version

Similar Questions

• How to check firmware and the version of the driver on Dell details

  I need to upgrade the version of the firmware and driver on a Power Edge 2950 server. Please let me know is there all orders for this information. I use the Windows 2008 R2 64-bit version.

  First of all, download and install OpenManage Server Administrator (OMSA):
  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=V1JDD&FILEID=3365593125&osCode=WS8R2&ProductCode=PowerEdge-2950&LanguageCode=en&CategoryID=SM

  Download and run to extract the files, and then run C:\Openmanage\windows\setup.exe, choose custom and make sure that storage management is installed.  Add your servernameoripaddress:1311 to the Intranet Zone of IE.

  You can use OMSA to display the current firmware and driver versions.

  Once you have established versions, you can get the latest version from here:
  http://www.Dell.com/support/home/us/en/04/product-support/product/PowerEdge-2950/drivers

  Updating BIOS and ESM firmware, first, and then on the other (drivers before the firmware if necessary).

• Router RV042 firmware Upgrade older and what is the Version 1, 2, 3

  We have a CISCO RV042.  We are about to begin a service IOPV with Joseph who declare:

  The RV042 is a wired router that requires no adjustment configuration for versions of firmware, that we tested.    NOTE: The Version 1 and 2 are compatible. Version 3 is NOT.  Revised firmware: 1.3.12.6 | 1.3.12.19

  Our router firmware is: 1.3.8.2 (February 12, 2007 10:43:08)

  We can upgrade to 1.3.12.6 or 1.3.12.19?  What is Version 1, 2 and 3?

  Hi David, V1 2 and 3 are the versions of the released router hardware. The best, I can say that the 1.3.13.02 is the last for routers V01.

  -Tom
  Please mark replied messages useful

• Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "coul

  Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].

  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "couldn't copy file at the location requested.  Help, please!

  Your use of the word "files" (in the plural) still makes me believe that you have not checked the permissions on the folder that is appropriate (in the singular).

  You must determine the Destination of the Lightroom Import dialog window Panel and see which folder Lightroom is really tr6ing to copy photos in (which may have been accidentally changed and is not what you may have used in the past) and change the permissions to write to this folder.

• Is it possible to always open Firefox to a known location on the office and size?

  I have an environment where I opened a number of windows for my application to specific locations on the desktop. The functions 'aid' will be open an instance of the Firefox browser with an appropriate local url. What I want to do is to specify the same initial starting point and the size of the window of the browser at startup.

  This is possible through a configuration option or the command line? Is it possible to 'block' the location information that is saved out of the browser? I tried starting it the browser by specifying '-nnn - nnn width height ' on the command line, but this does not seem to do anything.

  Thank you!

  In this version, it can still work if you use a JavaScript window.open call to specify the position.

  • [773045/questions/773045]
  • [762693/questions/762693]

• I want to install the U.S. version of FF and the version in traditional Chinese characters and use them both. How can I do this

  I want to use the English US version of FF and I also want to use Chinese (traditional characters) version of fire fox. But when I tried to install each of these two versions, they merged and let me only to use the Chinese version. is it possible to have both versions on my computer so I can use each of them in its appropriate context.
  Judd

  Yes, I often use several versions of firefox.

  Use custom install for the 2nd or both versions of firefox and create multiple profiles.
  

  Program records
  
  When you install firefox (you can leave the first version where it is) choose custom rather than the default values Setup. You normally use a location in the path of the program window, so that the files are easy to find related and execution. Maybe just add USA and C for default folder names, so that you have separated appropriate folders. You can rename all of the Firefox shortcuts after their creation.

  Two profiles
  
  You will need to have separate for each version profiles so that they work properly.

  1. I would like to start by creating a copy of the existing profile folder and all its subfolders. Copy in a safe place, out of program or firefox profile paths, the Windows desktop is an obvious choice. It is not necessary, but if something is wrong it allows possibilities of recovery or regression.
  2. For simplicity, let such existing firefox profile; If it doesn't work still. You can always delete the shortcuts for her later if she is not going to be used. (Do not rename the profiles until you are confident and fully understand firefox profiles and how they are used).
  3. Create a new profile for the American version of firefox. You can use it right away if your US version of firefox work properly, otherwise re - install firefox.
     • Carefully note the name of the profile and the folder name and the path. When you create a profile, it of wise always to use an empty folder, because if you imprudently delete the profile you lose everything, including all the important but unrelated files are contained in it because it was not initially an empty folder.
     • you have no need to uninstall firefox, but if you do, then do NOT use any option to delete personal settings or a Firefox or Windows option.
     • / ! ------Care if you remove the settings it will try to remove all settings, Favorites, passwords etc of normally installed versions of Firefox. (Proper use of file recovery utilities and luck is needed if the attempt to overthrow of the action)
  4. Rename it shortened to something suitable like us Firefox and configured to use the US profile.
  5. follow a similar procedure for Chinese version.
  6. It is possible to run both versions at the same time, open which uses the -no-remote option, but I'm guessing you won't need that.

  I'll add explanatory links later today, when I'm on another machine with my favorites available.

• How can I check the version of the firmware on the optical drive on Satellite P200

  I am a Satellite P200 and my Tempo suggests to download an update of the firmware to TO35, which only works if I TO33/34, how can I check that I have? I tried searching on my machine, but I guess that the firmware is not the thing to appear in searches. Any help would be appreciated, thanks in advance!

  Hi guys

  > How to check the firmware
  You can use a 3rd party program like Nero to burn.
  Nero presents the version of current firmware of CD/DVD players

  The firmware TO33 or the TO34 should already exist on the TS-L802A drive.
  Please check if you have exactly the same drive. TO35 firmware only works with the TS-L802A.

  If you have an older version of fimware as TO33 then please post here again!

  *@Voodoo*
  You really have a TS-L802A drive. ? How did you check the firmware version?

• deployment error: unable to locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.

  Hello world

  I want to deploy my project Teststand and got a strange error when creating the image.

  For many additional files with the suffix as .tso, alias, lvlpb, exe, dll... deployment tool launches the error message "unable to locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.» (see also the attached picture).

  If I exclude the files of my distribution or set them to "include without treatment or dependencies of elements of" the generation works fine.

  After the error, I checked the Temp folder. The temporary project LV is not yet created.

  I used the deplyoment-installation in the same way within a fromer project and had no problems like that...

  I use Win7 / LV2013 SP1 & Teststand 2013 f1 (5.1.240).

  Could someone help or support? Thank you!

  Finally, I tried the construction with LV2015 & TS2014 - no problems... Everything works fine...

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• HP Photosmart 7525: How to check the version of the firmware of the HP PhotoSmart 7525 is up-to-date?

  How to check the version of the firmware of the HP Photosmart 7525 is up-to-date? And where can I go to download the latest firmware?

  Hello

  Follow these steps to check the update of firmware for your printer:

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/document/c03312867/

  Note: the printer must be connected to your network to check the updates, if it is connected with a USB key follow the steps in the tehse to connect the * beep * to your wireless network:

  1. In the wireless menu, tap Settings.

• How can I determine the version UEFI implemented by the firmware of a PC?

  I found several ways to determine the version of the firmware/BIOS on a PC – for example mine is FRIEND v8.15 (05/02/2013).

  But is there anyway to determine which version of the UEFI is implemented by this firmware?

  I tried to find a description of the FRIEND v8.15 which maybe provided this information, but has not been successful.

  As a last resort, I considered as written to the company - but before that, any other ideas you have are appreciated.

  Hello

  Windows 7 doesn't support secure boot.  A lot of settings in the BIOS to do still get Windows 7 to boot UEFI mode as well as the support of compatibility (CSM) model in the BIOS offers the correct BIOS options.

  Frankly, I wouldn't buy a W7 PC delivered these days here as W10 is a great OS. If you have an application that proved not to be compatible with W10 then run it in compatibility mode.

  I've not seen many cases where different levels of BIOS are available for W7 or W8 and W10.  However, you might find instances where the BIOS runs only in UEFI mode.

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• Why won't my Canon MG3122 display something else then the XPS and WS versions?

  In the devices folder and printer, I see two variations of my Canon MG3122: a printer XPS and a WS:

  I would like to be able to set the standard printer as default, instead of having to always scroll and select when I go to rpint something:

  

  Does anyone have any suggestions? I use:

  

  It is extremely frustrating to not be able to set the default to an obviously existing printer.

  Hi fisch4billf,

  You will want to choose the version the default printer WS.  To do this, please follow these steps:

  1. in the start screen of Windows, click on the magnifying glass at the top right.

  2. in the search pane that is displayed, please make sure that 'Everywhere' is selected above the text box, and then type "devices" and select the PRINTERS AND DEVICES option when it appears.

  3. Locate the PIXMA MG3100 printer WS series icon, then select SET the PRINTER by DEFAULT.  If an arrow appears to the right of the set as default printer option, select the version of WS to the printer again.  When you do, a checkmark should appear on the printer icon in the printers and devices window.

  I hope this helps!

  It has not responded to your question or problem? Please call or write us using one of the methods on the page contact us for further assistance.

• When I click and drag a window to move its location on the screen does not move properly.

  When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

  original title: "leakage" of windows

  It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.

• Firmware and updates of the Addon for D90D7

  Hello

  How long do you keep the firmware updates and add-on for output devices?

  Why modules are listed per unit instead of the OS?

  Why the modules listed for my device not necessarily the add-on most recent available? For example WDM 5.5 contains new versions of Add-ons based Wyse.

  If I want Citrix receiver for my device 4.3 How long can I expect to wait to have available for my device? Or are we supposed to simply create are own packages after you cease to make updates.

  Can we expect improvements to the updates and the web in general experience finding things (downloads, forums, help, across different documents, not sure where to look sometimes) will improve with you coming under the ownership of Dell?

  Thank you

  Anthony

  Anthony,

  Let me answer each question better than I can.

  Q: how long do you keep the firmware updates and add-on for output devices?

  A: this is related to the product life cycle. This information is found at the following ADDRESS: http://www.wyse.com/support/end-of-life-policy

  Q: why modules are listed per unit instead of the OS?

  A: because the firmware is "Dependent on device", the firmware and all the Add-ons are stored in the repository based on the model of the device.

  Q: why the modules listed for my device not necessarily the add-on most recent available? For example WDM 5.5 contains new versions of Add-ons based Wyse.

  R: the only reason that I just was an oversight of the validation group.

  Q: if I want Citrix receiver for my device 4.3 How long can I expect to wait to have available for my device? Or are we supposed to simply create are own packages after you cease to make updates.

  A: there is no specific time limit that we must release the Add-ons. If you need the example of 9 Citrix Receiver) right now, you can install the Citrix receiver on the thin client or you can create your own package by using WDM. See WDM Admin Guide for more details on this.

  Q: can we expect improvements to the updates and the web in general experience finding things (downloads, forums, help, across different documents, not sure where to look sometimes) will improve with you coming under the ownership of Dell?

  A: Yes. We are actively working on moving the site of downloads to be consistent with the processes of Dell.

  I hope that answers your questions.