Location of the scanned Photos

Similar Questions

• How to change the location where the scan of the computer updates the file?

  I would like to know how to change the location where the scan updates the file.

  HI ROT2,.

  It depends what printer and the software you use?

  Normally, you will find a 'save to file Option save' like the screenshot below.

  

• Change the path of the file of the scanned Document

  Hi, can someone do that to me. I have a HP Deskjet 2515 all-in-one printer, I was wondering how to change the location of the file of the scanned photos or documents. Whenever I scanned a document, it was recorded on the forlder of my documents in the library. Please help me how this issue can be resolved.

  Hello

  To change the path of digital file, please see below.

  Open the wizard from HP printer > under Print, scan & Fax > scan a Photo or a Doc > advanced settings > Destination > under save location you select path

• How can I see the locations of the pictures in the year?

  

  When I go to year-round in collections, I 2014 and 2015. By 2014, it lists the places where these photos of this year. But it does not show me the locations of the pictures in 2015. I already checked to see that my places put in was on, but for some reason any shows that the location for the 2014 photos, but not of 2015.

  Photos will not display places, if there are too many places. Have you traveled a lot in 2015?

  I don't remember the limit on an iPhone, but on a Mac, the locations are shown only if there are less than seven countries.

• Location of the copy in Photos

  Is it possible to copy the location from one photo to another in Photos as we could in iPhoto?

  My iPhone picks up the location but my Sony camera does not work.  In the past, with iPhoto, I could copy the location of a photo with the location of a photograph (taken in the same place) who did not have the location information.  I thought the Photos were supposed to be updated to allow to add/copy the location.

  Using OS X El Capitan version 10.11.5 on an iMac

  Thanks for any help you can offer.

  Hi debby0514,

  If when you import photos from your camera Sony to the Photos app and the location data is not displayed or incorrect, the best way to solve this problem would be to manually add the location for the pictures once it's in the Photos app. You can do so by following the steps below.

  1. Select a badly located photo.
  2. choose Image > location > location to remove the menu bar.
  3. press on command-I to display the info of the image.
  4. at the bottom of the information window, click on location.
  5. start to type an address, city, company, or other name of the location. When you type, AutoComplete suggestions will appear. Select the location you want to assign to the image.
  6. repeat these steps for any image which has an incorrect location.

  Difficulty of the incorrect locations in Photos

  You can do this with several photos at the same time. Press on and hold down the SHIFT key, and then select the first photo you want to apply changes to. From there, click the last picture you want to assign to the same place for. Release the SHIFT key and then right-click on one of the images highlighted. Select "Get Info" and follow the steps above to enter the site. This will apply to this location for each image that you highlighted.

  This should get the desired location on your photos without delay. Thank you for using communities of Apple Support.

  Have a great day.

• In Photos, I changed the date, title and information on the location of the images of a slide digitizing company.  I want to preserve the custom metadata and the original resolution of 2500 dpi in a file backup, but when I export it loses my metadata chan

  Using version 1.3 of Photos, I edited the metadata about the images, I received a business of digitization of slides to insert the first day of the slide, the location, a title and a keyword.  I want to archive these images with the original resolution of 2500 dpi, but when I export original unmodified, it does not preserve information.  When I export by choosing export as XMP IPTC, I can't read the XMP file to see if there are my revisions.

  When I export using the 'Export # photo (s)' choice, I can use the previews/tools/Inspector/iptc and see my changes.  But this photo has only 72 dpi.

  Is there a way to preserve this modification of metadata information in the original not modified?  Alternatively, this file has XMP I exported the info?  If so, how can I read it?  And that would mean I need to export both the original unmodified and the XMP file to my files from archive?

  Don't know what you want - well there is a CIO field in the EXIF fields it is meaningless as DPI is not a setting but the result of a math problem third grade - points by (divided by) inches until you add inches per impression you have no IPR - and when you add inches the DPI for printing are determined by calculating not by any setting

  For more information, see http://www.rideau-info.com/photos/mythdpi.html

  A 1200 x 1800 pixels picture printed as a 4'x 6' printing is 300 DPI bit matter what setting the EXIF says

  LN

• Location of the file modified Photos - how I update Photos directory in FCP?

  I recently moved the storage location of all my photo files of my internal HD to an external hard drive that I was running out of room.  When I shot to the top of the FCP to edit videos, I noticed that the list of Photos is now empty where before it showed all my videos/images.  See here: http://screencast.com/t/ThHkIu0B

  So, how to upgrade the Photos folder directory in FCP?

  Material:

  Mac Pro (end 2013)

  Processor: 3.5 GHz 6-Core Intel Xeon E5

  Memory: 32 GB 1866 MHz DDR3 ECC

  Graphics card: AMD over-pants D500 3072 MB

  Software:

  OS X El Capitan 10.11.1

  FCP 10.2.2 (I don't have FCP plugins installed)

  Here is what I tried:

  • Delete FCP preferences and restart the computer

  In the preferences of Photos. You may designate a new location in the library system library.

  

  Russ

• Photo Gallery can't open this picture because you do not have permission to the location of the file asscess

  I had to format my pc yesterday and I can't access my photos on my hardrive 2ndry can anyone help this is the message I get when I try to view them
  Photo Gallery can't open this picture because you do not have permission to the location of the file asscess RJ

  I recently started having the SAME problem. Windows Photo Viewer working wonder in the past months on the same exact images without any problems.

  I suspect that Microsoft update the code somewhere which pushed as an update - what is now the cause of the problem.

  As a diagnosis, I tried with the right button "open with...". "and chose the paint. The same file opened without any problem.

  All the pictures are generated for all images without problem.

  Still, Windows Photo Viewer cannot display ALL my image files. Paint has no problem.

  Similarly, right click 'open with... '. "and choose Microsoft Office 2010. Loading the image without any problems.

  If the original poster has the same success using other programs - then the problem is with the Windows Photo Viewer - Microsoft of not having it recognize permissions for the code or something.

  It's on Windows 7 Professional 64 - bit. Latest updates applied Microsoft.

• My Windows Photo Gallery has incorrect time for good that my computer is correct. I know how to change the time, but wanted the exact time is displayed automatically when you scan photos etc as before.

  Time is incorrect in Windows Photo Gallery and I would like to do this automatically scanned early for photos instead of my change time.

  Hi Sardai,

  Unfortunately, this information is not always accurate. If you took some of your pictures in a different time zone, for example, the time recorded for these pictures could be incorrect by several hours. The camera can also be set to the wrong date and time. Or, if you're scanning photos, ta date will reflect the date that they have been digitized, not the date on which they were taken. All these anomalies can be adjusted manually.

  To change the date or time

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. If you do not see the details on the side of the window pane, click information on the toolbar to display it.

  3. click on the image you want to change.

  1. to select more than one picture, hold down the CTRL and click each picture you want to change.

  4. click on the date at the top of the details pane.

  5. click on the arrow next to the date and then click the correct date on the calendar.

  6. click on the time at the top of the details pane.

  7. Select the correct time.

   

  To adjust the time for pictures taken in a different time zone

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. right click on the image you want to change and then click on change time taken.

  To select more than one picture, hold down the CTRL and click each picture you want to change, and then click a picture when you are done.

  3. in the change to box, type the number of hours to change, or click the up or down arrow to select the number of hours. To make the new start time, type a minus sign (-) before the number.

  For more information, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photo Gallery can't open the photo because you are not allowed access to the location of the file

  Photo Gallery can't open the photo because you are not allowed access to the location of the file some of the image are open

  Click on the folder and change your permissions for it and all subfolders and files all rights and if necessary take hand the case (and maybe the parent folder or even its parent - and all of the subfolders and files) until you have the permission you need.  Here are the general procedures to help you:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SE message: changes made to this photo has not been saved. The file may be read-only or you are not allowed to check-in at the location of the photo, trying to crop an image, or mount it

  Original title: photos

  If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.

  They worked very well the other day, what's past?

  Hi boneyardwolf,

  1. where are the photos?

  2. you have any third-party photo editing software?

  3. what type of files you want to change?

  You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem

  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/9f6bf1f8-50EC-4baa-b2c5-212c823ded68

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot display pictures using Windows, error Photo Viewer: cannot open this picture because you don't have the appropriate permissions to access the location of the file.

  Original title: ASK the VIEWER of PHOTOS WINDOWS WINDOWS 7

  WHEN I OPEN MY IMAGE (PHOTO) COLLECTION IN WINOWS PHOTO AT SUNDAY VIEWER BUT IT WINDOWS PICTUREMESSAGE cannot OPEN THIS PICTURE BECAUSE YOU HAVE not the PERMISSION APPROPRIATE TO the ACCESS of the LOCATION of THE FILE, I CHECK NO VIRUSES, NO PROBLEM to OTHERS AND SAID THAT SATURDAY, I OPENED TIME OPEN THE PICTURES, BUT AFTER ONE DAY WHAT PROBLEM ANY DEFINITION of PROBLEM OR OTHER PLEASE HELP ME AS AMODERNE, IF YOUR NEED A FURTHER INVESTIGATION OF MY SYSTEM SAYS I SEND YOU AS BURT SOLVE THIS PROBLEM

  Hi JULIE,.

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are not able to view pictures using Windows Photo Viewer. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1 did you change on your computer before the show?

  2 are you able to open the file using paint?

  Please follow the steps mentioned below:

  Method 1:

  Step 1: Perform safe mode

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  System Restore can return programs and system files from your PC to a time when everything was working well.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: If you have installed an application after the date to which you are restoring, you will need to reinstall these applications

  Please complete all of the recommended steps and if after following the steps to issue still persists, please come back to us and we will be happy to provide you with additional options available that you can use to get this problem is solved.

  If you are unable to perform the steps mentioned above, I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

• How Scan photos using the printer and save it in the Gallery of photos from the computer?

  Original title: scan photos

  How can I Scan photos to my printer and place then in my Gallery of photos in my computer?

  Hi Joseph,.

  Please let us know the make and model of the printer you have.

  The method of image digitization and its related settings differs from one printer to another. So, I suggest you consult articles guide you may have received with your printer when you bought. If you are unable to find all the details in the article of guide, it would be best to contact your Technical Support of the printer for assistance on this.

  You can publish all your queries related to Windows on Microsoft Community Forums and we will be happy to help you.

• Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file. »

  Separated from this thread.

  I have the same problem when I try to access some of my photos through any method (File Explorer, IE, Windows Photo Viewer, etc.).  When I try to display the image, I get an error message that says "Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file."  A few photos in the folder open very well.

  The photos are stored on the hard drive of PC in the pictures folder.  Not all pictures are affected - some I can always access.  I tried to run your AutoCorrect tool - it has not fixed the problem.  I tried to add "everyone" by your above statement and he could not solve the problem.  While it was updating the permissions for everyone, it displays the following error message: "unable to enumerate the objects in the container.  Access is denied. »

  Hi Bruce,.

  You might face this problem when you have not signed up your computer as an administrator user. Please write us with the following details.

  You did changes to photo viewer settings prior to this problem?

  I suggest that you follow the steps in the link below by Babu V dated August 21, 2013 and check if this may help you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/window-Photo-Viewer-cant-open-this-picture-because/05e31f84-75ab-4772-84a5-5ce0e6e71f61

  Let us know the status of the issue.

• You can choose or limit the photos in the Photo of charm located on the start window?

  I'm on Windows 8 - Intel Core i7-4700 MQ 64-bit operating system on an HP Envy 17 laptop Quad t -.

  I have more than one folder of photos (in fact, the folders and the subfolders) located under my pictures (library > photos > my images)

  Is there a way to limit the photos that show the start > pictures of charm to only the photos contained in one of the folders?

  At the present time, the charm of the picture seems to be choosing at random pictures of any (perhaps all?) of the files and subfolders located in "my pictures".

  Will it go the other photo folders off the my images or images files, while they will not appear on the charm?

  Thanks in advance for any help!

  You're right, the tile will show random pictures of anything in your photo library.  You move images out there, if you don't want to show them.  Or you can also click the right button of the tile and "disable the Webcam live tile" so it will appear a picture at all.

  PS. the tiles are called just of tiles.  The charms are actually the 5 options on the right side of the screen (when you drag or point to the corner at the top), which are research/action/start/devices/settings.