Change the path of the file of the scanned Document

Similar Questions

• HP Officejet Pro 8600 e-All-in: similar question: not able to 'change the Scan tasks '.

  I have a similar problem as "ccb531", released 23/07/2015 08:22. I am unable to "Change Scan tasks" with the HP utility software. It gives the dialog box box below I need to install "HP scanning software".

  

  I installed the driver (alone) which is available on the site of HP support for my printer (HP Officejet Pro 8600 - N911a) and my operating system OSX 10.11.1 (El Capitan).

  I also followed the procedure that has been described by the support team in the post of 'ccb531', published 23/07/2015 08:22. That is to reset the printing system,uninstall the drivers and software, (repair your disk permissions is not longer available on osx 10.11), install all updates Apple and reinstall your software and drivers. But with the same result.

  Have I missed any other driver that is not listed on the support site or is the HP Easy Start on 18 November 2015 2.1.0.66 driver not yet fully functional for El Capitan?

  Any help would be much appreciated since I can't change the scanning resolution when scanning my documents on computer from my printer document feeder if the documents are too large to be useful.

  Thank you.

  Hello

  Install the HP Easy Scan app below, then try to change the scan tasks once more:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Shlomi

• OfficeJet pro 8600: not possible to change the scanning of the Panel of the printer resolution settings

  With my Officejet pro 8600, there is no possibility to change the scanning resolution settings when you are working in the control panel of the printer (not present button to touch) when I want to scan to the computer, while in the manual it is mentioned that, after pressing the Document Type, it should be possible to reach the resolution to change the resolution of the scan setting. On the other hand, when the scan to a memory card the button change the resolution settings is present.

  Sometimes for the scanning of all computers to select (winXP SP3 installed on it). The HP printing software is installed on all computers and manage digitization to the computer is turned on. It is possible to change the resolution settings when using my computer with the HP printing software, but as I said not in the use of the printer.

  Thank you to help you solve the problem!

  Hey mk75053,

  Scanning to memory card has the parameters of resolution through the front because that is the only way for the device perform this type of analysis.  However, to change the resolution settings for the Scan of the computer, one will have to perform scans through the software installed on the PC.

  I have all three types of 8600 models where I am located (base, more high quality) and of all printers simply ask to start the analysis after selecting the scan type.

  I hope this helps.

• cannot change the pdf document

  purchase the program and cannot change the pdf document

  Hi Michael,

  In order to remove the pages in a PDF using Acrobat Pro DC, you must choose "Arrange Pages" in the right pane, select the pages and choose the trash icon in the top bar (or use the delete key).

  Thank you

  -atul

• Cannot open the scanned document

  I use an officejet 8600 +.  I can't open the documents that have been scanned in PDF format.

  Hello

  Each of them or just one or two? Please scan 1 page (for test) computer and select document , and then open the scanned document.  You may need to update Adobe reader as mentioned on the following assistance:

  http://helpx.Adobe.com/Acrobat/KB/cant-open-PDF.html

  Kind regards.

• LaserJet M5035 MFP: I have a purple line which appears in the scanned document

  Hello

  When sending e-mail through the printer scanner, I have a purple line which appears in the scanned document. Scanning is done from the "feeder ' ' the printer and not the glass.

  The windows were all cleaned.

  I did the test and digital printing of the "feeder ' ' and I have no lines for printing!   I did update the firmware of the printer and I still have the same result.

  You have a solution to this problem?

  Thank you

  

  The small windows of the charger scanner had a small red above mark.  When the analysis has been done and sent on an e-mail, the line shows as it is scanned were made with the color scan option.  If I print the line doesn't show because the printer is not color!

• cannot send the scanned document

  I get a message telling me to check my e-mail program after the scanner refuses to send the scanned document

  It takes really copy and paste the full error here to all possible assistance.

  You can always scan the document on your HARD drive, in My Documents for example and then attach it to an e-mail.

• OfficeJet 4650: Biased Image of the scanned document

  During the analysis of the image produced by the scan my documents is biased on the new page... a little as the document I wanted to analyze somehow go slightly twisted during the scanning process.   Y at - it a setting or fix I can do to help my scanned images is more aligned on the page?

  Hi @TalusHiker,

  Welcome to the HP Support forum.

  I understand that you use a printer all-in-one HP OfficeJet 4650 with a Windows Vista computer and analysis the scanned document is slightly asymmetrical. I would like to help with that.

  In order for me to propose a proper resolution, it can help to collect a little more information from you.

  You scan the automatic feeder (ADF) of Document, or the glass dish?

  The scan seem asymmetrical when you look at it on your computer, or when it is printed?

  Is the pages in a separate document or part of a book?

  I'll watch for your reply, so I can go into it for you. Just reply to your convenience.

  Thank you.

• Cannot change the original document in preview

  Hello

  After upgrading to Sierra, I can no longer edit a document in preview mode before without making a copy. When I opened a pdf file of Evernote in the preview and change, I get the message, "the original document is not editable, so created a duplicate with your changes." I can't understand how to solve this problem. Any ideas, or is this a bug?

  Preview continues to be a viewer and annotation tool, but it's not a PDF Editor. You can add multiple annotations and save the PDF file on itself and leave the preview. When you reopen the document, you can edit your annotations.

  I can open a PDF form, enter some content in the fields of the form with preview and then save it back on itself. Reopen it in preview, I can change the content previously placed in the fields of the form. Still no offer to duplicate the PDF file.

  Can't reproduce your problem with 9.0 and macOS Sierra 10.12.0 Preview (A 16, 323).

  Do not use Evernote.

• How can I change the scan destination folder?

  I recently purchased HP Officejet 4500 G510a-f. I would like to change the folder in which the analysis should go.

  Save to save the file options saves the scan to the new location, but only once, the next time I do the exercise to get the location has changed. I would like to have a permanent solution?

  Hello

  Since the change of place even save it to the file save options you described.

  For the changes recorded for later use, click the button Save shortcut under the scan shortcuts list and save your settings as a shortcut, then use the modified shortcut.

  Shlomi

• Menu has changed, the scans disappeared... need help!

  Since this morning, something changed with my ability to access to the & use my scanner on my printer function. I have the series of J611 3050 has and used the night to print and scan last and everything works great. But when I tried to analyze something earlier, nothing is beautiful.

  It used to be (not later than last night) when I clicked on the icon for HP desket a menu would open enabled me to choose what I wanted to accomplish. Now, when I click on this icon is "printer assistant" for which nothing happens when I click it I don't see, 'See what's printing' "set preferences" and 'customize your printer', which none have no bearing on this issue that I can find.

  It used to be (not later than yesterday) that when I scanned it something a window open which allowed me to make a few changes to analysis before you save it.  It was all the scans have been automatically saved in a specific file of my choice. This window opens now is no longer, and sweeping turns to in limbo where I can't find it.

  Can someone PLEASE help me understand what happened and how do I go back to the way things were?

  Thanks in advance!

  Remy

  The solution I found to this problem is to uninstall the printer and reinstall using the latest drivers. HP released a new package of drivers for this printer and all printers that use a similar software, which corrects this problem.

  HP Deskjet full feature software and drivers

• Want 4520: Change the scanning resolution

  How can I change the resolution of scan JPG on my 4520 want? It is default to 600 dpi, and there is no option to change it.

  Thank you.

  Hello
  
  Thank you for using the HP Forums.  Have you installed the software features FULL?

  If you don't have, can you download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Start the scanning software and follow the steps belowto (for example) to change the resolution.

  Hope that helps!

  

  
  
  Hope that helps.

• change the scan by default 6520

  Hello

  Could someone tell me please how to change the default location to scan on a 6520 all-in-One

  Thank you very much

  Hello

  For computers with Windows, please try

  (a) ion printer on the desktop, double-click

  (b) select scan a document or photo,

  (c) click on advanced settings.

  d click the Destination tab,

  (e) select the location to save the copy...

  (f) click Ok, then save the settings

  Kind regards.

• How to change the scanning resolution?

  I have Windows 7 and HP 7520 four-in-one.

  The scanner offers resolutions of 75,100,200,300,600,1200 & 2400.

  How can I change these resolutions? I have a lot of different sizes of old photos and would like to change the resolution to 400 or 500 but cannot find a way to do it. I can't type in the resolution selection box. Could not find a way to do either in the instruction booklet.

  Can someone tell me how to do it please.

  Hello

  They are a predefined, no custom option. You must use 300 dpi or 600 dpi

  

  Kind regards.

• find the file of the scanned document

  I scanned a document using a Dell V305 printer/scanner to computer Dell 540 s, so I tried to save in a Word document. My version of Office is Windows 2007. I can't locate the file.

  It will be where you said the digitization program to save it in time you did the scan.