Location of VMware - viclient.exe

Similar Questions

• Upgrade to ESXi 4 failed or crashed - no comments or the viclient.exe tool

  Hi all

  I tried to upgrade my server ESXi 3.5 to 4 with the Host Update Utility 4.

  It seems that I had my main administration on an old network card interface is no longer supported by ESXi4.

  If in the reboot of the machine he did not find the network - but seemed version 4 start OK.

  I had installed secondary network card that still, the system could see (intel 1000 gt) flies over the management network back to it through the console interface, however, none of the feedback tools are installed and the vmware - viclient.exe is not on the machine.  I'm guessing that these get unpacked later in the upgrade process?

  My question is can I run the new host update utility and run again another upgrade with the zip package?

  Or other recommendations to resolve the failure of the upgrade?

  I wondering before I am really living things.

  Thanks for any help.

  Paul.

  You can run the utility to update again. I did it several times where the framework for an update or the fix failed. If I remember running the VI client against a host 4 2.5 upgrades the VI client and I think that it downloads of vmware not the host. Can be a problem. If you download the 4 client and install the new update utility. You may be able to extract the image ISO ESXi as well.

• VMware-viclient-all - 6.0.0 - 3016447.exe broke Console hosts 6.0 ESXi and ESXi 5.5

  Installed VMware-viclient-all - 6.0.0 - 3016447.exe and he broke the Console: could not resolve ENGINE_load_aesni: 127

  Uninstalled and installed more old VMware-viclient-all - 6.0.0 - 2741530.exe, still the same error.

  Loaded procexp and found it to be the launch:

  C:\Program Files (x 86) Remote Console Plug-ins 5.5\Internet Explorer\vmware \Common Files\VMware\VMware - vmrc.exe

  When connecting to the host ESXi 6.0

  Attempts to connect to a host ESXi 5.5, same error, console does not load.

  Finally, connected to the ESX 5.0 and everything works because he throws a VMRC plug-in different VMware.

  Having no host 5.1 to test.

  
  Everything worked up to this that VMware-viclient-all - 6.0.0 - 3016447 has been installed.

  This processor also has instruction AESNI (Ivy Bridge)

  I just found out that the culprit is Workstation 10.e.x.p. beta now the Console version to 10!

  that is the vi-client installer is not overwrite all of the files in c:\Program Files (x 86) Remote Console Plug-in files 5.5\ \Common Files\VMware\VMware because the version is a is 9.0 and less than 10.

  The problem seems to be that many applications use the same folder c:\Program Files (x 86) \Common Files\VMware\VMware Remote Console Plug-in 5.5.

  And the uninstall program does not uninstall because it is shared by workstation.

  If you rename or delete the folder c:\Program Files (x 86) \Common Files\VMware\VMware Remote Console Plug-ins 5.5\ and then uninstall and reinstall VMware-viclient-all - 6.0.0 - 3016447.exe it works and install version 9.

  The latest version of the client is so 10 Workstaiton beta exposure, and nothing has updated the folder c:\Program Files (x 86) \Common Files\VMware\VMware Remote Console Plug-ins 5.5\ since it was installed.

  This is a problem if you do not install the vi client on a clean system, I think he needs a caveat in the installation process.

• Cannot download vmware - client.exe from the web page of the ESXi Server

  Aloha,

  I used VMware-VMvisor-InstallerCD - 3.5.0_Update_3 - 123629.i386.iso to create CDs and ESXi successfully installed on the server.  However, post customer I can not download the file VMware - Server Web page viclient.exe.  Says error page Web page could not be found.

  I checked the cd and compressed all the *.tgz files.  None of them included VMware - vclient.exe

  A link to the VMware - vclient.exe would be appreciated.

  Thank you

  Luis

  Hello

  You can try the following steps.

  (1) ssh to the box of ESXi using PuTTY or any other ssh client.

  (2) go in /locker/packages/3.5.0/ folder find customer record Vi you should have the viclient.exe file.

  (3) once you get the scp file to your windows desktop using winscp and install it.

  Thank you

  Samir

  PS: If you think the answer is useful please consider rewarding points.

• Installation of VMWare Workstation 11.1.0 on Win 8.1 is THAT MSI will fail with the error "could not write value vmware - tray.exe for \software\microsoft\windows'currentversion\run-cles.

  Hi all

  The MSI failed with the error message as "could not write value vmware - tray.exe in \SOFTWARE\Microsoft\Windows'CurrentVersion\Run key.  Make sure you have fufficient access to that key, or contact your support staff' while trying to install vmware workstation 11.1.0 in windows 8.1.
  I tried to call the installer with run as administrator but it does not help, please suggest me overcome this error.

  Hi Vincentand welcome to the VMware communities!

  This error indicates that you have some security software (antivirus or antimalware software) that protects the part of the registry.  Can you try to temporarily disable all security software on your host computer and see if the installation can move forward?

  See you soon,.

  --

  Darius

• error in editing esxi3.5 vmdk using vmware - mount.exe

  VMware - mount.exe (5.5.0 / 18463) is installed on a physical box all new xp sp3.

  VMDK files were copied on the ESXi data store using putty pscp. Name.vmdk reviews and comments name - flat hard are present.

  VMware - mount.exe j: "\Guest name - flat hard" fails

  If I rename the files to remove the spaces and edit the primary vmdk file to point to the new - name of flat file, editing does not always work.

  The error on the command line (not a message box) in all cases is:

  "Unable to mount the virtual drive.  The disk can be used by a virtual

  machine or mounted under a different drive letter.  If not, check that the

  Is a virtual disk file, disk and that the disk file has not been damaged.

  I checked the user guide and any of the limitations apply except maybe one:

  -vm not running (and did not work when they are copied), ok

  -host windows, windows comments, ok

  -not in read-only or compressed, ok

  -j: mapping is superior to d: and don't use it, ok

  -vmdk is ntfs, ok

  -No snapshots involved, ok

  as far as the error message itself goes:

  -vm not running (and did not work when they are copied), ok

  -do not already mounted, ok

  -certainly a vmdk file, ok

  -do not corrupt (can restart the VM), ok

  I suppose there is the possibility that vmdk FFL was damaged in the copy; is there a way to check it (md5 in ESXi maybe)?

  What is the only element not specified in the user (from 2008) guide - vmware-mount support ESXi 3.5 vmdk files? ESX 3.x is taken in charge, but ESXi?

  If not what else can I check?

  Thank you

  do not use this Centenary vmware-mount - use the last VDDK virtual disk development kit =.

  Also rename files to remove the spaces is prohibited: use quotes.

  Not mount the - flat.vmdk - that is not the right one

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• VMware - vdiskmanager.exe

  Hello

  Where can I get vmware - vdiskmanager.exe?

  Can someone pls send a download link?

  You can download as part of the VMware VDDK package which supports Linux and Windows

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• How can I change default location VM VMware Workstation via Group Policy or to a Script?

  Hello

  I administer a laboratory of my school networking in a Windows Server 2008 R2 environment. We want to enable folder redirection but since VMware Workstation creates new virtual machines by default in the C:\Users\Username\Documents\Virtual Machines, I can't do this, or else the NAS would be overloaded.

  My question is, is there a file registry or config that I could change via a script or a political group? In this way, all students would default their VM install to another location.

  Thanks for your time.

  The default location is %USERPROFILE%\Documents\Virtual Machines and is not set in the registry of Windows or the disk file until the default is changed and is then defined in the file %APPDATA%\VMware\preferences.ini as: prefvmx.defaultVMPath = "FQP.

• Download Vmware-viclient vmware site?

  Trying to find the download of the client on the site and I can't?  I know that you can connect to the hypervisor in-house and download, but I'm doing work externally from another machine and I thought that I would be able to download from the Internet but can not find it... where is it?

  Thank you

  Trevor (Beginner)

  If you need the 4.1 vSphere client, you can enter the thinapped vSphere 4.1.

  http://labs.VMware.com/flings/ThinApp-vSphere

• Could not locate the component Booster.exe. Cannot start MSVBVM50. DLL not found.

  I try to view the files on a CD and get the error message.  I tried the 'fix - it' of windows program nothing works.  My version of Windows Vista software is not compatible?  I had no problem reading DVD disk in the past.  Thank you!

  Hi Cbran,

  1. you remember to make changes to the computer before this problem?

  2. what Fixit did you run?

  It seems that the program that uses the MSVBVM50.dll file is corrupted by a reason any.

  Step 1:

  You maytry to run a SFC scan to check corrupt files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2:

  Uninstall the CD/DVD driver. Follow this step to do the same thing:

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. expand DVD/CD Rom Drives and right click on the device, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  d. restart your computer and check

  Also check out the following link and try the steps of Andre.Ziegler Monday, May 31, 2010 21:25

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/b4b7df85-e33d-480F-a9b4-17fb8998cc4f

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't install itunes because: can't locate the %AppData%\protector.exe network

  Try to download itunes 9.1

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello d3 gosman,

  Thanks for posting on the Microsoft answers Forum.

  You do not give much information but you might want to look at the following article to treat the Error 1606 %AppData%.

  KB Article ID: 886549 -you receive an "Error 1606" error message when you try to install or remove a program from Microsoft
  There is an automatic FIXIT button included in the article that will fix the problem automatically or you can manually make the changes.
  If please reply back and let us know if this solves your problem. If this isn't the case, please provide more details and exact error messages.
  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• VM in VMware Server 2.0 management application?

  Hi all

  I use VMware server for some time and have upgraded to the latest version recently.

  Although the web interface is a wonderful thing for the decentralization of the management of the virtual machine, I find it much worse then the previous request, that we used to manage vmware.

  The tomcat service is very heavy, the web interface is also a bit slow (even connecting from the local host), etc..

  Is it possible to use the old management application?

  Thanks in advance,

  Luis Silva

  The short answer is 'no '. However, if you are on a Windows client you can use the VI client, which is available at https://yourserver:8333/client/VMware-viclient.exe. It has some limitations like not being not able to modify virtual machines with higher than 7 virtual hardware and cannot add hot USB devices but it is what is used to manage the ESX and ESXi hosts directly or through Virtual Center.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Silent installation and scripted of SSO and vCenter 5.1

  Hello

  
  

  I'm looking to do a silent installation and SSO scripted and vCenter.

  
  

  The following worked for v5.0...

  
  

  «"Start/wait d:\vCenter-Server\vmware-vcserver.exe/q/s/w/L1033 /v" /qn DB_SERVER_TYPE custom = DB_DSN =------DB_PASSWORD = ' vc\'-'XXXXXXX\' DB_USERNAME =------'sa\' VPX_USES_SYSTEM_ACCOUNT = 1/l * v \"c:\vcinstall.log\»»

  
  

  ... but does not work by 5.1 and I can't find any documentation.

  
  

  Any help is appreciated as always.

  
  

  Thank you, Andy.

  Hi Andy,.

  As Boloo said, there are some underlying the rules for vCenter 5.1 that did not exist for 5.0, which means that some additional settings are required for an installation script.

  Here are some examples for you which I use when redeploy my lab (note that B:\VIM_51 is my media extracted folder):

  Installation of SSO

  start/wait B:\VIM_51\"Single Sign On"\VMware-SSO-Server.exe/L1033 /v"/ QR MASTER_PASSWORD = VMware1! CONFIRM_MASTER_PASSWORD = VMware1! CONFIG_TYPE = configuration SETUP_TYPE = basic SSO_DB_SERVER_TYPE =-"Custom\" JDBC_DBTYPE = Mssql JDBC_DBNAME = RSA JDBC_HOSTNAME_OR_IP = DC JDBC_HOST_PORT = 1433 JDBC_USERNAME = RSA_USER JDBC_PASSWORD = VMware1! SKIP_DB_USER_CREATION = 1 DBA_JDBC_USERNAME = RSA_DBA DBA_JDBC_PASSWORD = VMware1! COMPUTER_FQDN = VC. Lab.local IS_SSPI_NETWORK_SERVICE_ACCOUNT = 1 SSO_HTTPS_PORT = 7444 "

  Installation of the Web Client

  Start/wait B:\VIM_51\vSphere-WebClient\VMware-WebClient.exe/L1033 /v"HTTP_PORT HTTPS_PORT 9090 9443 SSO_ADMIN_USER=admin@System-Domain SSO_ADMIN_PASSWORD = = = VMware1! "LS_URL = https://vc.lab.local:7444 / lookupservice/sdk/QR".

  Installation of the inventory

  start/wait B:\VIM_51\"Inventory Service"\VMware-inventory-service.exe/L1033 /v"HTTPS_PORT = XDB_PORT = FEDERATION_PORT = QUERY_SERVICE_NUKE_DATABASE = 1 TOMCAT_MAX_MEMORY_OPTION 10111 10109 10443 = S SSO_ADMIN_USER=admin@System-Domain SSO_ADMIN_PASSWORD = VMware1! "LS_URL = https://vc.lab.local:7444 / lookupservice/sdk/QR".

  vCenter installed (at least)

  Start/wait B:\VIM_51\vCenter-Server\VMware-vcserver.exe/L1033 /v"/ QR DB_SERVER_TYPE = Custom DB_DSN = vCenterDB DB_USERNAME = vpx DB_PASSWORD = VMware1! FORMAT_DB = 1 JVM_MEMORY_OPTION = SSO_ADMIN_USER=admin@System-Domain SSO_ADMIN_PASSWORD = VMware1 S! LS_URL =https://vc.lab.local:7444/lookupservice/sdk IS_URL =https://vc.lab.local:10443 VC_ADMIN_USER=vi-admin@lab VC_ADMIN_IS_GROUP_VPXD_TXT = 0 VPX_USES_SYSTEM_ACCOUNT = 1 VCS_GROUP_TYPE = VCS_ADAM_LDAP_PORT unique = 389 VCS_ADAM_SSL_PORT = 636 VCS_HTTPS_PORT = 443 VCS_HTTP_PORT = 80 TC_HTTP_PORT = 8080 TC_HTTPS_PORT = VCS_WSCNS_PORT = VCS_HEARTBEAT_PORT = 902 "60099 8443

  vSphere Client Installation

  "Start/wait B:\VIM_51\vSphere-Client\VMware-viclient.exe/q/s/w/L1033 /v" / QR ".

  VUM Plugin

  "Start/wait B:\VIM_51\updateManager\VMware-UMClient.exe/q/s/w/L1033 /v" / QR ".

  Install the Update Manager

  Start/wait B:\VIM_51\updateManager\VMware-UpdateManager.exe/L1033 /v"/ QR VMUM_SERVER_SELECT = vc.lab.local VC_SERVER_IP = vc.lab.local VC_SERVER_ADMIN_USER =-'lab\vi-admin\' VC_SERVER_ADMIN_PASSWORD = VMware1! VCI_DB_SERVER_TYPE = Custom VCI_FORMAT_DB = 1 DB_DSN = DB_USERNAME VUM = vpx DB_PASSWORD = VMware1! »

  Hope that helps, shout if you have any questions.

• If descargo El web front-end VIC desde el UN ESX, realmente desde donde descargo el practicable?

  Buenas a tod@s.  The ago is reflejada in el asunto pregunta...

  Perhaps del VC?

  Saludos.

  Xavier

  VCP4 and professional VCP3 certified VMware.

  -

  ---

  If upon that esta o any other campaign respuesta ha sido utility, votalas. Gracias.

  If you find this or any other information useful or appropriate, please consider giving points. Thank you.

  ASI're, version 4.1 antes el client estaba guardado in nuestro servidor ESX (i), /usr/lib/vmware/hostd/docroot/client/VMware-viclient.exe en, en version 4.1 is not we have the vsphere client integrated por lo cual our direcciona has a web server y comienza the descarga.

  Saludos.

  If you find this information useful, please give points to "correct" / "useful."

  My blog virtualizacion you en idioma

• Parse error the file "clients.xml" Server "SERVER IP"...

  Hello

  no idea why I get this error:

  Parse error the file "clients.xml" Server "SERVER IP". Logon will continue, contact your system administrator.

  and after pressing the OK button, I get another error:

  The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception

  When I try to connect to ESXi 4.0 with vSphere client?

  My clients.xml file content (https://SERVER IP/client/clients.xml):

  & lt; ConfigRoot & gt; ------& lt; ClientConnection id "0000" = & gt; ------& lt; authdPort & gt; 902 & lt; / authdPort & gt; ------& lt; version & gt; 4 & lt; / version & gt; ------& lt; exactVersion & gt; 4.0.0 & lt; / exactVersion & gt; ------& lt; patchVersion & gt; 1.0.0 & lt; / patchVersion & gt; ------& lt; apiVersion & gt; 4.0 & lt; / apiVersion & gt; ------ & lt; downloadUrl & gt; https://*/client/VMware-viclient.exe < /DownloadURL & gt; ------& lt; / ClientConnection & gt;-& lt; / ConfigRoot & gt;-

  Thank you

  I bet you're under Windows 7. The customer is currently divided on 7 and compatibility modes will not help. The frustrating bit is that it works on Vista.