Installation of VMWare Workstation 11.1.0 on Win 8.1 is THAT MSI will fail with the error "could not write value vmware - tray.exe for \software\microsoft\windows'currentversion\run-cles.

Similar Questions

• Installation of Windows Vista Service Pack 2 (KB948465) will fail with the error code 800F081F

  Hello

  I tried to install windows service pack 2 for vista via windows update, but it fails everytime with error code: 800F081F. I tried to run Microsoft FixIt and systsme even update the tool but no luck. even the system tool update crashes while ' installation of hotfix for Windows (KB947821) (update 1 of 1)...» ". No online solution proved to be correct in my case. Help, please.
  Thank you

  Hello

  System update readiness tool will take some time, so I suggest you wait a while until the process is completed.

  You can find newspapers by accessing this folder.

  c:\Windows\logs\cbs\checksur.log

  I would suggest trying the following steps and check.

  Method 1:

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Methods 1 and 2 require changes in the registry to do. Make sure that you back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997#appliesTo

  Note: The Chkdsk command will try to fix bad sectors on the hard drive. All the data on these areas could be lost in the process. It is also possible for the computer to enter in a start State no.

  Proceed at your own risk.

  In addition, see the reference article-

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Answer if you need more information on this, and we will be happy to help you.

• I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) during the installation of iTunes and QuickTime on my laptop.

  I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) when installing iTunes and QuickTime on my laptop (Windows 7, 64-bit operating system).  Tried to change the registry key to make sure that I had (full control) in the registry key main (HKEY_local_machine\software) and all of its subkeys (including \Wow6432Node and \Microsoft) and restarted my PC.  But I still get the same error message.  What Miss me?

  ORiginal title: HKEY_local_machine32\software\microsoft\windows\currentversion\run

  I tried all the advice support online from Apple without success.  Then I called Apple support and they want to charge me a fixed fee of $19.95 to Troubleshoot modifying registry keys with me.  I refused, and this is why I post this question on the Microsoft Forum.

  Did you follow this advice?

  "Did you download and save iTunes on the desktop > then right click > select run as administrator to install.

  And do you have displayed in iTunes community that is free to do?

  Ask the question in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

• Windows 8 installation fails with the error "the product key entered don't match any available to install windows images.

  I have a Sony Vaio SVE1113M1EB provided with pre-installed Windows 8. Yesterday, my laptop won't start and recovery tools did not work. Then I deleted the partitions in stock and tried to install Windows 8 on DVD. He said: "the product key entered is not one of the images available for installation windows." I wrote my product key. How to install Windows 8?

  Original title: Installation of Windows 8

  Hi Qadir,

  The issue could be due to the supplied product key does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  I hope this helps. If you have any other questions, we will be happy to help you.

• VMware Tools upgrade fails with the error

  12 Pro - 12.1.0 workstation build-3272444

  Individual license

  Guest operating system: Ubuntu 14.10 64-bit

  VMware Tools: 9.6.2.31837 (build 1688356)

  Virtual MACHINE works fine except...

  Updated the VMware Tools, download stage publishes a message and is abandoned:
  Error: There was a problem updating a software component.   Try again later and if the problem persists, contact your system administrator or the VMware support.

  I can't find useful this question online resolution.  Perhaps this community can help find a solution?

  Furthermore, I also have a VM for 64-bit Ubuntu 15.10 who works with success the VMware Tools 10.0.1.357 (build 3160059).

  I need to run both versions of Ubuntu for software compatibility.

  Maybe you can try to get the packages of the latest VMTools from their repo upgrade server: filing of CDS - /var/www/public/stage/session-59/cds/vmw-desktop/ws/12.1.0/3272444/windows/packages

• KB980182 installation fails with the error Code 80070057

  OS: Windows 7 Home Premium x 64

  After several attempts, I can't KB980182 to install through Windows Update or by downloading and running manually the. MSU. I am presented with the code 80070057 error whenever I try.

  I also tried to restart my computer several times to get this to install without a bit of luck.

  Is there a way to fix this without having to reinstall Windows as I saw suggested elsewhere?

  Try this:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your key of handy product, uninstall NIS 2009, LiveUpdate and all Norton Add ons via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2010 using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8 see if KB980182 now installs. If no joy, open a free support ASAP incident!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista Sp2 installation fails with the error ASN1

  When I run the installation of SP2 through Windows Update or the standalone version I get the following error «end asn1» unexpected data  Anyone have any ideas?

  I tried everything I can think and find on the web or on TechNet.  I even reinstalled the operating system and the error showed once again.

  Hello RowdyMrB,
  Thank you for visiting the Microsoft Answers forum.
  I suggest you to run a scan of the System File Checker to see if there is corruption in your system from the wrong key of RAM,

  To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Please post back with the last 50 lines of the output JOURNAL.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Installation of update for Internet explore 8 (KB2744842) fails with the error is 0x8007F01F.

  Original title: Why microsoft tells me critical update that has '0' K '0' time to load? It's stupid A security update cumulative for Internet Explorer 8 for Windows XP (KB2744842) Last published date: 21/09/2012

  Security issues have been identified that could allow a malicious user to compromise a system running Microsoft Internet Explorer and to gain control. You can protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer.

  The system configuration required CPU recommended: not specified. Recommended memory: unspecified. Recommended hard disk space: unspecified.

  How to uninstall This software update can be removed via Add/Remove programs in Control Panel.

  Get help and support http://support.Microsoft.com

  More information http://go.Microsoft.com/fwlink/?LinkId=255505

  Installation failure Error code: 0x8007F01F

  Try to install the update again, or seek help from one of the following resources. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (toll-free for questions related to getting updates)

  Review and install updates Install updates Download size (total): 0 KB *. Estimated at your connection speed: 0 *. (* Downloaded; ready to install)

  Restore and check again Only selected updates will appear the next time you check the updates.

  High priority updates Microsoft Windows XP A security update cumulative for Internet Explorer 8 for Windows XP (KB2744842) Download size: 0 KB 0 minutes (downloaded; ready to install) Security issues have been identified that could allow a malicious user to compromise a system running Microsoft Internet Explorer and to gain control. You can protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer.  Details...

  Hi Robert1775,

  Thanks for posting your question in the Microsoft Community. We are happy to help you!

  From your problem description, I understand that you are unable to install the update to Internet Explorer 8 (KB2744842) and the error is 0x8007F01F.  Please correct me if I misunderstood the question.

  Before troubleshooting, I need to ask a few questions.

  1. Are you facing this problem with this update or with all the updates?
  2. What is the full error message?
  3. Did you recent hardware or modifications to the software on the computer before this problem?

  To solve the problem, try the methods and check after each method:

  Method 1: run the Microsoft Fixit to solve the problem with Microsoft Windows Update is not working.

  http://support.Microsoft.com/mats/windows_update/en-us

  Method 2:

  You cannot install some programs or updates: http://support.Microsoft.com/kb/822798

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Method 3: Try to download the update and install it manually:

  Update cumulative security for Internet Explorer for Windows XP (KB2744842):

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=34735

  If the problem persists, post your reply with the results. We are happy to help you with the advanced troubleshooting steps.

  It will be useful.

• Microsoft Office 2003 updates are installation failed with the error.

  Unable to install the updates of Windows office 2003?

  Original title: Windows update cannot install Office 2003 updates / I have Win XP Professional SP3. I am tired

  Hello

  -What is the error code that you get when you try to install updates?
  -Is the specific question to the updates of Microsoft office?

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
  http://support.Microsoft.com/kb/906602
   
  You can also post your question under office forum if the problem is specific to the MS office updates.
  http://answers.Microsoft.com/en-us/Office
   
  
   

• Windows10 installation fails with the error code 80200053. Update Windows product unresolved error, code 80070057

  I'm running Windows7 and have attempted to download/install Windows 10.  The Windows 10 download/install fails with error code 80200053.  Troubleshooting Windows Update product unresolved error code 80070057.  How should I proceed?

  OT:

  Installation of Windows 10

  I think that this error has something to do with the Windows updates blocking antivirus.

  Try this:

  (1) disable the anti-virus and all others no essential programs

  (2) type in services.msc RUN which will take you to the 'services' and search for Windows Installer mine has been set to manual so leave it put there and just start it

  (3) now, run windows update and wait for your window installed correctly

  (4) restart the computer

  Let me know how it goes!

• Muse update installation fails with the error: DW071 & DW0003

  Here is the Setup log error:

  Exit code: 7 please see specific errors below for troubleshooting. For example, ERROR: DW003, DW071... - Summary - 0 fatal Error (s), 3 (s) - payload: dotNet 4.5 4.5.0.0 {B89609E0-1A98-11E5-9217-A35DB58AA028}---ERREUR: DW071: ERROR: DW003: payload of third party installer NDP452-KB2901907-x86-x64-AllOS-ENU.exe failed with exit code: ERROR-2145124329: cannot install .net framework.

  I have already completed the installation of repair on all C++ applications and installed the dot net 4.6 update and restarted the computer. 

  Hi ,

  Please, try the following steps:

  • Uninstall Adobe CC of the machine (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Set to "Full control" permissions on the files of Adobe for all users in the following locations:
    • [System drive]: \Users\ [user name] \AppData\Local\
    • [System drive]: \Program Files (x 86) \Common Files\
  • Restart the computer.
  • Install the application Adobe CC (Creative Cloud help |) Creative cloud for office)

  Kind regards

  Nicos

• VMware converter 5.5 failed with the error failed to partition the disk of destination

  I tried to convert the centos linux server physical to virtual. However, I received an error message at 1% as below,

  Error: Impossible to partition the disk of destination.

  FAILED: an error occurred during conversion: "CalculateGPTPartitionLocations failed!"

  
  

  Conversion of GPT partition is available vcenter converter 5.1 and higher, so the GPT partition on the source server will not be a problem.

  Tried several ways as the storage of data changing but still receive the same error message.

  Anyone encounter this before?

  Hello

  Unfortunately there is a bug with Linux P2V Converter when the destination drive is greater than 2 TB (is not whether TPG, it's size). Sorry for the inconvenience.

  The solution would be to reduce the volumes instead of destination and/or their distributed on multiple disks. Another solution would be to leave unchecked high-volume and clone them manually after the conversion.

  Another misfortune is that these workaround solutions are not possible in your case - the root volume occupies approximately 4.3 TB, and the two 'start-up' and '-' are needed to perform a conversion with the reconfiguration.

  The options I can think of are:

  -make a manual P2V, i.e. to create the destination (with partitions, logical volumes and base) computer created and formatted, clone the data (for example the converter uses tar via ssh) and manually configure the virtual machine. The final step is, fixing/etc/fstab, installation of GRUB and rebuild the initrd image

  -install new and copy data

  -Optionally divides the volume of root on the source machine if possible and then convert it. For example, to add a new drive temporarily and move some data so that all volumes become smaller than 2 TB.

  Kind regards

  Plamen

• Payload installation MSI failed with the error: 1603

  The installation fails during the installation of Photoshop CC from the list of applications

  http://helpx.Adobe.com/Creative-Suite/KB/error-1603-Fatal-error-occurred-1.html

  Mylenium

• R12 Installation on Windows XP (with Cygwin) fails with the error

  Hi all
  
  I try to install R12 on my PC with 32-bit Windows. In the control of pre-installation phase, I get the error:
  
  ===============================================================================================
  
  System utilities
  
  command: cmd.exe /c F:\StageR12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin\bin C:\Oracle_Prereq_SWs\VCPlus
  
  F:\StageR12\startCD\Disk1\rapidwiz > echo off
  / cygdrive/c/Windows/system32/cmd
  order «»who is available.
  "gnumake" is not available.
  ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
  who: no gnumake in (/ usr/bin: / cygdrive/c/WINDOWS: / cygdrive/c/WINDOWS/system32)
  
  RW-50011: error:-the availability of utility systems test returned an error: 1
  
  =============================================================================================
  
  While I installed Cygwin, correctly and completely, in C:\cygwin. I saw some threads here who advised me to set the environment variable correctly, so I added "C:\cygwin" my path variable...
  
  The message says "who is available, while"gnumake"is not"... I wanted to find gnumake.exe under C:\cygwin\bin so that I could move it to the C:\...\system32 folder, but I can't find it there... Am I supposed to?
  
  Any help will be highly appreciated because I'm stuck on this issue for a long time now... Thanks in advance.
  
  Aravinda

  Salvation;

  Please check:

  Re: RW-50011: error:-the availability of utility systems test returned an error

  Respect of
  HELIOS

• I get a repeated error on install Platform Update For Windows Vista (KB971644). Fails with the error code 80073AA2. Installation comes from Windows Update.

  Windows Update loops round and round constantly to not set up correctly, then restores the changes

  Do I need to install the System Update Readiness Tool KB 947821?

  Probably not: I had a lot of doubt that SP2 is installed if KB947821 has not already been installed.

  Given that this problem is after a fairly recent install of SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=pick this=""> ).

  In the case opposite & whereas KB971644 is NOT a security update, you can simply hide the "thing":

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update |  View the updates available (or Select the updates installed): right click on the (platform) update for Windows Vista (KB971644) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.

  NB: If KB971644 were available for download/installation manual (and is not), I would have you try it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft