Lock icons after return Windows 7 Windows 10

Similar Questions

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• Can't access toolbar or of desktop icons after installing windows 7

  I recently installed windows 7 on my desktop, thought everything was good.  Sometimes, when the computer is powered on or after he wake mode in standby, the toolbar icons and desktop disappear.  The bottom rises and I can right click for options.  It still allows me to use most of the options when I right click, but that's all I can do.  I can't access the toolbar, Ctrl alt delete is that the black screen (nothing happens after that). But it happens that all the other time, or so when I turn on the computer.  If I run a cd boot everything works fine. I'm running vista, and I made a custom, Setup because the upgrade was not an option.  I also tried to boot from the cd and do a repair, but the problem is still intervene.  I made sure that everything has been updated before I did the installation and followed all the instructions.  I did all the updates that are available for installation (when I can get the operating system works).  Any thoughts?

  ErikA2008,
  If you still experience this issue, you can try these things and then let us know the results.

  First off I would say running a different virus scanner to ensure that nothing achieved by your installed one.  You can use the Onecare Safety Scanner or there are many other free around.

  Then run the following:

  Disk error checking

  System File Checker
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network icon is missing from the notification area after the window updated

  I have some problems about the notification for the network and the volume icon!
  They are missing after the window updates!
  I tried to check the "Taskbar and Start Menu Properties' > 'Notification area', Volume and network are grey which I cannot check these boxes. Grateful if you could help me solve this problem!
  Thank you very much!

  Hi VisBo,

  Welcome to the windows vista forums.

  Please follow the steps below to resolve this issue:

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area.

  For the network icon, you can also do with the registry.

  NOTE:

  Please be careful while making changes to the registry, any undesirable changes can affect your operating system.

  1. click on start.

  2. in the start menu search bar type regedit, and then on enter.

  3 Please go to this location in the registry by expanding each location by clicking on the brand more on the left side.

  HKEY_CURRENT_USER\Software\Classes\LocalSettings\Software\
  Microsoft\CurrentVersion\TrayNotify

  4. remove the keys 'IconStreams' & 'PastIconsStream '.

  5. start the Task Manager by pressing ctrl + alt + delete at the same time.

  6. in the Task Manager right click on explorer.exe and kill the process.

  7. click on applications in the task manage, press new task and type explorer.exe, and then press ENTER.

  Explorer will now reboot and your icons should return.

  Alternatively, you can try to uninstall the most recent update that has caused the problem. You can uninstall an update by clicking on the icon of the program features in Control Panel. Select the update that caused the problem, and then uninstall it.

  You can also make a selection of updates to install by setting the windows updates to notify you before installing an update. To open this Panel, and then click windows updates, click settings.

  I hope this information is useful.

  Please let us know if you need assistance.

  Concerning
  Rehman - Microsoft Support

• Microsoft Security Essentials icon, absent from the taskbar after restarting Windows XP

  original title: lack of Windows XP icons after restart

  After that I restarted my antivirus, Microsoft Security Essentials icon is missing from the taskbar. It also happened when I have ESET NOD32 installed. When I disable the SSDP Discovery Service, in the section of the Admin, it will appear. But when I go back and set it to automatic, it will still be absent.

  For all that is you probably not need to have running SSDP Discovery Service, for security reasons almost always disable this service on any system that I put in place.

  John

• disable the window maximize AFTER return to windows windows 7 fron 10

  I recently returned to windows 7 (time to go to windows 10 months) and since then I can not turn off to maximize windows.  I disabled the "prevent windows" option in the ease of use of the mouse and keyboard with the combinations to have an on and off.

  Can you help me please turn this feature off, no offense to anyone, but I really hate it.

  Thank you

  Deb.

  Hello Deb,.

  Thanks for posting your query on the Microsoft Community.

  By the description, you like to deactivate windows optimize desktop.

  As the question arose after return to windows 7 there is a possibility that the display driver may got corrupted. You have already made linear troubleshooting to solve the problem. I suggest to update the graphics card and check.

  Make sure that your display driver is up-to-date. Then follow the steps below.

  1. press on the Windows key + R to open Run
  2 type devmgmt.msc in run and press on Enter.
  3. expand display adapter.
  4. right click on the device and select Update driver software

  You also try to

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information is useful. Please let us know if you need help with Windows.

• I lost my msn icon after the upgrade to windows 7. How I connect msn plsu? What is the web address?

  I lost my msn icon after the upgrade to windows 7. How I connect msn plsu? What is the web address?

  Hello

  I suggest you to contact MSN customer support for assistance.

  Here is the link for "how to contact MSN Support.

  http://support.Microsoft.com/kb/940784

  I hope that helps!

• Beats Audio DOES not work after update windows 10.

  Beats Audio does not appear in WIndows after upgrading Windows 10. The icon is missing from the system tray, control panel and in the search bar. Cannot find the drivers in the HP store.

  Guys, please help. The audio is not good without configuration Audio Beat.

  Thank you

  Jain darshan.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• HP Solution Center does not work after installing Windows 10.

  After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

  Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

  Or, is there a way to fix it?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• HP Envy 13-j001ng 2 X: no rotation of the screen after updating Windows 10

  Hello

  After the Windows 10 update, the screen will not rotate automatically. Sensor apps tests show that they are working correctly. I have the rotation toggle lock in the notification Panel (I read that some people affected by similar problems don't have it). Any solution for now or should I just wait for updates?

  To solve the problem, I had to replace the pilot ODS sensor V2 with the Simple device orientation sensor driver. Now rotation works.

• Brother MFC-885CW Inkjet Multi: Reinstall Control Center 3 after upgrading Windows 10

  Hello

  I have recently upgraded my HP with Windows 10 desktop computer, hated, then returned to Windows 8.

  After returning to Windows 8, my 3 command center does not open, just a blank white screen appears I can't close unless I go into task-master & close it manually.

  CC has worked perfectly until I upgraded & I read somewhere that windows 10 uninstall incompatible programs when he did the upgrade to 10.

  Can someone help me to reinstall CC 3?

  HELO.

  Uninstall the KB3119147 update

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Each PC with the Update icon will install Windows 10

  I have the Update icon on my laptop and I even booked my copy of windows 10, but when I go to 'check pc', it shows that my pc is not compatible, can anyone tell me the conditions required for the update

  The reservation application indicates that I have incompatible hardware (IE. CPU, Bluetooth, video card, printer) or software, what do I do?

  You can check the software developer and supplier of equipment for the latest updates before performing the upgrade.

  UPDATE: Please see the following article by Barb Bowman (Microsoft MVP) solutions to this problem.

  Is that what my display graphic or peripheral Bluetooth compatible with Windows 10? Pre-trial showed that it was not.

  

  Microsoft compatibility database is continually updated with new data. What you can do is to regularly run another scanner to see if the database has updated the information about your hardware. Even if you get this message, you can still run Windows Update after installing Windows 10 and download the latest driver too.

• How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on

  How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on.

  I got this without my notice:
  Administrator
  Administrator.User
  Administrator.User.000
  Now, I want to go back to my old files with the first administrator account. Also, I would like to know why.

  Hello

  Thanks for the reply.

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• No sound after installing Windows Update KB2962407 on Windows 8

  After installing Windows Update KB2962407 (RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014), the PC loses all the sounds.  Its returns if I uninstall this update.

  Hello

  Microsoft has confirmed that this problem occurs on some Windows 8 PC.  You can solve this problem by opting for Windows 8.1.

  Microsoft made in Windows Update KB2962407 to fix this problem.  While installing Windows 8.1 is the preferred method, you can also resolve this problem in Windows 8 by checking the updates of Windows and reinstall Windows Update KB2962407 .