EA4500, network drive doesn't work without access to the secure folder

Similar Questions

• my network drive doesn't work what can I do to fix

  He said the network drive is not available how can I fix this setting

  Hello

  1. have you made changes on the computer recently?

  Follow the steps listed in the article below and check.
  New drive or mapped network not available in Windows Explorer drive
  http://support.Microsoft.com/kb/297694

  I hope this helps.

• Allow "Flatten XML" and "Unflatten from XML" to work without access to the internet.

  Hi all

  In my program, I use the XML Unflatten and flatten XML screw. On my development computer, everything works fine. As soon as I put it in the production environment, it has stopped working. I reduced to doing in my production environment, there is no internet access and I'll be never able/allowed to have access to the internet there.

  Someone at - it an elegant way to solve this problem? (By "elegant" I do not want to manually change all of the .xml files that I produce to include the path to the local LVXMLSchema.xsd) Is there a file .manifest or .config can we change to point my program compiled to the xsd on the right file? Perhaps another method?

  Thank you!

  Kind regards

  Filip.

  Hi all

  I think I found the solution.

  In the end, it wasn't an Internet. It was the inclusion of the classes in the compiled code or not.

  Attention! It was not enough just uncheck everything in the "Additional Exclusions" section of the building. I actually had instantiate each class possible, which can be converted by the "XML Unflatten" in the .vi. I even tried to put the lvclasses in the always include the article of the source of the build. This no longer works.

  Thanks for all your suggestions guys!

  Kind regards

  Filip.

• How to keep creative clouds working without access to the Internet?

  I'll be out of the country for two weeks with virtually no access to the internet. How can I make sure that creative cloud will continue to work if there is no way to confirm the activation?

  Hi there-

  As you may know, a license check is performed every 30 days:

  http://www.Adobe.com/products/creativecloud/FAQ.html

  Do I need a continuous Internet access to use my Creative Suite apps?

  Because your Creative Suite applications are installed directly on your computer, you will not have a continuous Internet connection to use on a daily basis. However, you need to be online when you install and license your software and at least once every 30 days thereafter. The software warns you when you connect to the Internet for a license status check.

  However, if the product can not check your permit at the 30-day mark, a period of 7 days will begin to give you a little extra time. If you are not able to access the internet within 7 days, your applications will be blocked (Source: http://forums.adobe.com/message/4513667#4513667)

  Unfortunately, there is no way to "force" the verification process to ensure that the audit is not right because you start your 2 weeks away.

  Here are a few forum threads that contain more discussion of this issue:

  http://forums.Adobe.com/message/4747308

  http://forums.Adobe.com/message/4746582

  Good luck

• USB 3.0 flash drives doesn't work is not on the USB 2.0 in windows 7

  My kingston USB 3.0 does not no flash drives or supported on USB 2.0 in windows 7 and 'The window error' occurred: Windows found driver software for your device, but has encountered an error trying to install.

  Hi Faisal,.

  What is the brand and model of the computer?

  You will need installed USB 3.0 drivers on the manufacturer's Web site work with the USB 3.0 flash drives.

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  This problem occurs because the USB 3.0 device is not completely inserted in the port.

  The USB 3.0 supports the devices USB 1.0, 2.0 and 3.0. The first layer of pins inside the USB connector are for USB 1.0 and 2.0 ports. The second layer of pins inside the USB connector is USB 3.0 ports. Therefore, to resolve this problem, make sure that the USB 3.0 device is inserted in the port.

  Method 2:

  Uninstall and reinstall the USB drivers and check if it helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box and then click OK.

  (b) click on the Hardware tab.

  (c) click on the button Device Manager.

  (d) expand Bus USB controllers.

  (e) each device under the node Bus USB controllersright click and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  We know the results.

• Mapping to a network in Windows 7 drive doesn't work at home location but works at the location of the Office

  Hi all

  I think that the title also my problem that I'm having now. I don't know if I have to install or remove additional security stuff in order to have the mapping network drive work in my home region. No matter how many times I tried to map a network drive that is host to somewhere in the United States as a dedicated server running Windows Server 2008, home to my laptop it keeps popping "Path not found" error message, but when I'm at the Office I am able to map the network drive with the same computer laptop and office network is not the area with dedicated server they are different network.
  Y at - it an idea why and how to solve this problem?
  Thanks in advance
  Sam.

  Hello

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

   

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  I hope this helps.

• DVD player does not appear error - the driver may be corrupted or missing. Code 39, fix the driver installation fails, virtual drives don't work - same results if the material under tension

  Original title: drive does not appear, difficulty he pilot installation fails, virtual drives don't work - same results if the material under tension

  A few weeks ago, as my two DVD players (the two Samsung Lightscribe SH-S223Q of) disappeared after a repair installed, I did for the other problems (not sure if it was directly after installation because I don't notice it right away, but it was no doubt). In Device Manager, it gives the message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried the Microsoft Fix It tool (Mats_Run.dvd.exe) that detects the problem and says "Install device driver" in a popup, but then he says "software device driver failed to installed. At the end it says under the issue, the "CD/DVD drive is not detected" and the status of Fix 'not set '. Note that, when I boot from another hard drive (with Vista 64 on it installed from the same DVD, just a new installation) disks appear very well. Also I can boot from the drive as well.

  I can't do a repair installation, since it must initiate Windows, and I can't load the disc. I tried to update my BIOS but that has no effect.

  Recently I actually moved this hard drive to another one, with another brand of hard drive and all the rest. Just like before, if I boot from another hard drive (this one with Windows 7), the drive unit-a Optiarc AD-7230 s - looks and works, and I can also boot from the drive at startup. But since the drive hard as I want to use, the drive does not appear. Fix it, etc. Device Manager gives the same messages as before.

  I tried virtual drives - Daemon Tools Lite and Virtual Clonedrive. When I try to add virtual devices to help, nothing happens. The new drive will be displayed in the Manager of devices, but with the same error Code 39 as the real drive.

  What are my options at this point? How can I get the drive to appear or to fix my copy of Windows?

  I could solve this problem. I started in Ubuntu and deleted the existing cdrom.sys, cdrom.inf etc. files (as in Windows, they were protected and I couldn't delete them), then I copied the files from another installation of Vista I had on another hard drive. After having done that, I updated the drivers in device, disabled/enabled readers and readers management that presented themselves.

• I got lightroom 5.5 on a computer with a hard disk failure. How do I install it on my new computer without access to the old computer?

  I got lightroom 5.5 on a computer with a hard disk failure. How do I install it on my new computer without access to the old computer?

  You can download Lightroom 5.7.1 (the final version of Lightroom 5) from the following Web site: keeping up-to-date for Lightroom

  Lightroom 5.7.1 is a solid version, and you are entitled to it. You will need your serial number to activate the installation.

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• Access to the secure area does not work with user registration registered user name and password

  I have a problem giving access to users who register for the video service I provide. The form that they fill out includes it a chosen user name and the password, which should give them access to the secure area, but is not currently. I'm puzzled.

  In the CRM, the recording of the customer in question has a user name and current password? and on the "Subscriptions" tab, they are subscribed to the appropriate secure area?

  Your form online, under the 'Edit properties' button, "Safe Zone" is set to the appropriate secure area?

• Store the RAW files on a network drive. It work?

  So I have a problem with my wife :-). We working with photos and currently have all the photos and the LR library on a single computer.

  The database and the vignette prevs are on an SSD drive in order to speed abd that RAW files are the classic storage. The problem is that we defend whose turn it is to use the desktop computer. So I thought to share the same RAW, DON'T SHARE THE SAME LIBRARY photos.

  1. my idea is to have two computers with SSDS and first double the library so that we start with the same set of parameters and photos.

  2. then I install the disk with RAW photos on a network drive: a small server, a router with connectivity HDD etc and point both libraries at the same place

  3. then I'll work on my wife library and mi on hers. Libraries will change gradually from their content, but RAW photos will remain on the network drive.

  QUESTIONS RELATING TO THE:

  1 is current wifi technology fast enough to deal with this type of use? SATA drives are faster than wifi, I guess, but I notice a big difference assuming the thumbnails (previews) are stored and generated on the local machines?

  2. can anyone suggest what equipment to choose in order to have a disorder of the system operation without?

  3. is there a way to protect RAW to be moved to a different location or renamed files? For example, my wife creates a folder and import photos there names and he "birthdya of my children." I know that she often made mistakes in order to my computer, I will import the folder to my library (to have access to the same set of photos) and change the name of the "birthday of my children." This will rename a folder existing physically on the HARD drive so my wife can no longer access it once the name of the folder has changed. Any ideas to avoid this kind of problems?

  4. is there a feature that allows LR watch certain folders for new folders\files automatically so that when my wife imports a new photo session, it will automatically appear in my library as well?

  In general, I would like some feedback from experts if my ideal is OK or not. Or perhaps there is another solution to my problem? Cloud Internet storage is out of the question because my internet is not that fast (I live in a forest area and not rely only on the wireless internet, cable or fiber optics).

  Answers

  1. It depends on your wifi connection, I think. Certainly some wifi will be fast enough. I think that the only way to know is to try it.
  2. I'm sorry, I can't
  3. In your operating system, you can lock the files (make it read-only), but of course this can always be overridden. The best approach, in my opinion, agrees that once you give a name, the rule is that you cannot rename it. And beyond, even better would be to use keywords, captions and other metadata structures to organize instead of the folder names, in which case rename in your catalog is not a problem. (Of course, there many other benefits to using Lightroom structures to organize instead of organization record)
  4. Yes, you can set up a "spy case" in Lightroom so that it will automatically import new photos in this folder.

• Freecom network drive does not work in Windows 7

  My network of Freecom 400 Gb, LAN + USB 2.0 drive, works fine in Windows XP.

  After installation of the software (for XP) Windows 7 recognizes the drive (FND) in the network, but clicking on the drive reported an error.
  When you try to 'Add and remove mapped actions' drivers software the network drive does not.

  Unfortunately, Freecom doesn't give not any medium.

  On some forums, I found a 'solution' that did not work for me: Start - computer - Network\\FND\Public

  If anyone using a Freecom network drive has found a solution, it could make me very happy to cummunicate this for me.

  Johan Dulac

  Hello

  1. What is the exact model of the Freecom Network drive number?

  2. What is the full and exact error message?

  I suggest you to check if the drive is compatible Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I would also refer the link for Freecom support:

  http://www.Freecom.com/support

  http://www.freecomforum.com/

• Extreme drop airport utility but the network still doesn't work?

  Hello

  I hope you can help and I don't know if I'm worried for nothing, but it began to annoy me now.

  First of all the details of my network are as follows:

  Cable modem connection cable-> Cat 6 to airport extreme (new model height) which acts as a router for any network-> Branches out of there at an old airport extreme (flat square one) and new height time capsule.

  Once the old extreme and time capsule are in Bridge mode to extend the network, because they are wired into the new AE.

  This morning was faltering then checked connection airport utility.  Two new AE and TC had the warning triangle and were asking to be "forgotten" to the network.

  Reset the new AE and airport utility picked up so I put up from scratch and has received the green light nice and everything was fine!

  Then implement the TC.  The minute that this was recorded on the network, even in Bridge mode, which suggested the airport utility, the new AE got the dreaded yellow triangle and asked to forget.

  I've done a few times now, step by step, update that I will and I can not all 3 on the network "green lit" as they used to be.  I used the app to radar network and it is smooth or duplicate IP addresses, but most annoying network works like a charm.  The only unit with the appropriate settings for access to the internet is the new AE - all the other boxes are simply fill these parameters therefore, even with the yellow triangle, it always seems to work.

  Am I worry for nothing, or is there something I should be concerned?  An idea is an update which was pushed caused some problems?

  I'm under El Capitan 10.11.6 and 6.3.6 airport utility.

  All iOS devices in the House, running the airport utility in a show the same problem too.

  Thank you

  Ben

  There are many posts here lately related to this.

  A 'solution' refers to those who have set up their base stations for Back to My Mac. If you did, how to follow recommended action is temporarily remove or disable this option, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

• Pavilion g6 2301AX: System Restore doesn't work is not on the new HARD drive

  My factory installed HGST HDD is not short DST check, so I bought new internal HDD of WD5000LPCX. I did the recovery DVD windows 8 long ago and tested several times.

  The problem, I do face is, after I ran the system recovery (insert all 5 DVD then restarts Recovery Manager), I get the error "No found bootable media" when the legacy support is disbled. On activation of legacy support, begins the phase of installation of driver, but after a while, my laptop is stuck in a reboot loop. I left it for half an hour but he kept just reboot.

  Guarantee of the laptop is long gone. New installation of Windows 7 has worked well, showing everything goes well with the material, but I want my Windows 8. Help.

  He resolved myself: had to convert the GPT MBR partitioning system.

  As this community seems inactive, I'll post like how to convert to GPT:

  NOTE: You will need any installation of Windows DVD for this. I used Windows 7 DVD.

  1. first activate the legacy from BIOS support. (Press F10 to enter the BIOS settings)

  2. Insert the Windows installation DVD, and then press F9 to change startup options. Boot from the CD/DVD drive.

  3. once the loads of installation, select the "Repair Windows" option, located at the lower left corner.

  4. find the command prompt and run these commands:

  DISKPART

  LIST DISK

  SELECT DISK 0

  CLEAN

  CONVERT A GPT

  OUTPUT

  5 reset. Disable the legacy from BIOS support. Now the recovery system will work without any problem.

• Shortcuts in a mapped network drive do not work

  Hello

  In a server that is running Windows server 2008 R2 I is a shortcut to an application in a shared folder.

  I'm not able to execute/run the shortcut when from another computer, I map a network drive to the shared folder. The error message says "the item 'nameoftheprogram' that this shortcut refers to has been changed or moved, and this shortcut no longer works correctly. You really want to remove this shortcut? »

  I tried several different settings in the properties of the shortcut: I checked 'run as administrator' in the shortcut tab > advanced, I tried another setting "run this program in compatibility mode", in the general tab, I played with permissions... Nothing really seems to work.

  Maybe you have an idea, a tip, an experience to share on this problem? In any case thank you for your attention on this issue.

  Your

  Michael

  Hello MichaelRoarus,

  I suggest that you have to look at the below article that gives you information on what the talks on setting up shortcuts with group policies. Refer to the section, additional considerations that mapped the talks on setting up shortcuts for readers:

  http://TechNet.Microsoft.com/en-us/library/cc753580.aspx

  If you are still not able to create shortcuts, I suggest that you post your question to the Technet Forum for a better answer to your question. It is a link that you can follow to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.