Locked my computer lout laptop vista Home premium!

Similar Questions

• My computer compaq laptop (vista Home premium) couldn't strtup with error: starting wdfldr.sys & Wfd01000.sys critical files is corrupted. __

  Last night, when I tried to stop, he asked the "updates and downtime', I said yes.
  This morning, when I tried to start it, it has not started windows:
  He started with the Startup Repair tool... nothing can be done automatically it is written and the signature of the problem is:

  Root cause found:
  ----------------------
  Criticism of Boot C:\windows\system32\drivers\Wfd01000.sys file is damaged.

  Root cause found:
  ----------------------
  Critical file starting C:\WDFLDR. SYS is corrupt

  Any solution for this please?

  Hi saisinga,

  This error messages are usually caused due to the failure or corruption of files of drivers on the computer.

  I would first check if you are able to boot in safe mode.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are unable to boot into safe mode then I suggest that you try a startup repair using the vista installation disk and check.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If restarting fails then try a system restore using the windows vista installation disc.

  To use the Windows recovery environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows recovery environment, follow these steps:
  1 put the installation disc in the disc drive, and then start the computer.
  2. press a key when you are prompted.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions
  3. Select a language, a time and currency, and a keyboard method or entry , and then click Next.
  4. click on repair your computer 
  5. in the System Recovery Options dialog box, click the operating system that you want to repair, and then click Next
  In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point that was created when the program or the driver has been installed.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• I lost the hybrid sleep on my laptop Vista Home Premium. The controls reveal that it is because of VGA files and or legacy (that they) what should I do to recover the hybrid sleep please

  I lost the hybrid sleep on my laptop Vista Home Premium. The controls reveal that it is because of VGA files and or legacy (that they) what should I do to recover the hybrid sleep please

  Allow hybrid sleep is turned on? :

  How enable and activate standby hybrid under Vista
  http://www.mydigitallife.info/how-to-enable-and-turn-on-hybrid-sleep-in-Vista/

  Missing or not found allow advanced settings of hybrid sleep in Vista Power Options
  http://www.mydigitallife.info/missing-or-not-found-allow-hybrid-sleep-in-Vista-power-options-advanced-settings/

• SP2 is unable to download after failure of computer with windows vista home premium

  My computer crashed and I restarted after the DELL factory settings is a Windows Vista Home Premium but I can't seem to download the SP2 so that I can get IE9. I have SP1, but when I try to download the SP2 it tells me to get SP1.

  Please do not mark a reply as the answer unless it responds to your question.

  It is what is in my previous answer to check what level of Service Pack you have installed.

  «Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64 bit installed.»

  It will also tell you which SP you have installed. »

  What does it there?

• How to recover the "administrator password" on laptop Vista Home Premium?

  Hello, someone knows how to recover the "Administrator password" window? I have a Vista Home Premium laptop. I will appreciate any suggestion. Thank you very much.

  Hello

  This is the information from microsoft on you assist on passwords

  http://support.Microsoft.com/kb/940765

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• How to wipe the laptop Vista Home Premium and replacement/installation with Windows 7 32-bit.

  I am interested in wiping my own laptop (Microsoft Vista) and the installation of Windows 7 32-bit system manufacturer. Can someone help me with this please? Step by step. Thank you!

  Hello

  This should help you.

  Make sure you save all your data before you start this method, because it will be lost.

  And that you remove the existing Partition Vista during this process.

  "How to do a clean Windows 7" install

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

• How to turn off/turn on my notebook computer touchpad under vista home premium?

  I have a model laptop Medion MD 96420. When I write something, I often accidentally brush on the touchpad with annoying effect.

  I asked Medion customer support and I was told that it is a software problem. A big problem, apparently.

  Hi josefgrubert,

  Follow these methods.

  Method 1: Follow these steps:

  (a) go to control panel, mouse and device settings tab.

  (b) click on enable or disable.

  Note: On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, just do Fn + F7 or F8.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

• HP laptop (Vista Home Premium) won't wake up mode 'sleep'

  My HP Pavilion dv6910us laptop will follow the recommended power options and enter "sleep mode", as you want it or made-to-order... among the STARTUP options or by closing the lid.  However, once he is in "sleep" mode it won't wake up.  The LED on the power button flashes and the indicator on the chassis... but by pressing, open the lid or by touching the keys is useless... he wakes.

  To restart the laptop, I have to disconnect power, remove the battery and then connect the power/insert battery.  Needless to say, it causes Windows down and declare an unexpected shutdown during the power upward.  I did the research many resolutions... currently, my best solution is to change the power options so that when plugged the laptop doesn't go to sleep and then if I disconnect I have to shut it down... Rather, I don't have to go through this hassle all the time.

  I've followed many troubleshooting procedures... Updated BIOS update... Updated graphics driver... I even tried a "clean boot"... no additional services except for Windows services and has always had the same problem.

  Please... Help!

  This link solved my problem

  http://www.vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html?filter [11]

• Active Directory domain services is currently unavailable; Cannot find printer; Acer Extensa 5620 laptop, Vista Home Premium Service Pack 2; Automatic update

  I can't print on network printers.  I did what was suggested previously and deleted the printers and tried to reinstall, but apparently Windows does not find the printer. I get the famous error "The Active Domain Services Directory is currently unavailable".  It started a few days after an automatic update.  My network is just a peer-to-peer network - no Exchange.

  Although I do not understand why this error, which is apparently a problem been known for months, is not a statement of knowledge on the repair, or even more revolutionary base, has not been corrected, I hope you can give me instructions on how to repair concrete.

  Hi Francois,.

  The issue of Windows Vista you have posted is related to Windows Vista in a domain environment. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Vista Networking forum.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer has an operating system of windows vista Home premium 64-bit. When I try to get updates, there is a message error code: 8000-ffff. How to solve this problem?

  My computer has Windows Vista Home Premium 64 - bit operating system.  When I try to get updates, there is an Error Message Code 8000 ffff.  How fix/resolve this problem?

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
  http://support.Microsoft.com/kb/946414

  How to reset the Windows Update components?
  [Launch the difficulty mode by default and aggressive , if necessary]
  http://support.Microsoft.com/kb/971058
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 (KB948456 - X 86) on a laptop Vista Home Premium 32 bit SP1 with all updates of Windows installed.  Quickly fails after it starts with error 0x800b0100 in the system log.  It's a fully verified SP2 full download.  I did a full chkdsk /r who fixed some issues.  Removed AVAST.  A running Fix It tool that fixes the problem with crypt services.  Scanned for malware with MRT.  Scanned for malware with MalWareBytes.  Scanned for rootkit with the McAfee tool.  Run the sfc/scannow, that signals mistakes.  The CBS. Partial contents of the LOG file (see KB972036):

  2014-03-18 11:59:36, CBS NonStart info: success, start, treatment not required, as expected.
  2014-03-18 11:59:36, info CSI CSI 3222024 (0x00312a08) store initialized 00000005
  2014-03-18 11:59:36, CBS Session info: initialized 30360259:262197728.
  2014-03-18 11:59:37, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2014-03-18 11:59:37, CBS Session info: 30360259:262197728 finalized.  Reboot required: no
  2014-03-18 11:59:37, CBS Session info: initialized 30360259:266957728.
  2014-03-18 11:59:38, CBS brand store corruption flag because of package info: Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0. HR: 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPICbsClient::EnumPackages:156) cannot open the package hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list hr = 0x800b0100
  2014-03-18 11:59:38, CBS Session info: 30360259:266957728 finalized.  Reboot required: no
  2014-03-18 11:59:38, info CBS SPI: could not enumerate the packages CBS
  2014-03-18 11:59:38, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2.

  KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18005 hr = 0x800b0100 store

  System will not install KB972036 - States does not apply.

  Referring to 956702 KB notes that the http://go.microsoft.com/fwlink/?LinkId=167357 link that needs 32-bit is 64-bit.  In addition, it specifies SP2 - which obviously I do not have.  But I manually downloaded the apparently correct tool and ran it - get does not apply.

  Hi John,.

  Apologize for the delay in response. Please try the steps as described in the following article:

  Windows Update error 800b0100

  Back to us for assistance.

• Windows Vista Home Premium cannot find Xbox 360 as extender

  This may be long but im giving information as possible.

  I'm good with the computer. My Vista Home Premium computer cannot find my xbox 360 as an Extender. When I use the WIndows media player 11 and share, he sees my xbox very well. Zune software, same thing. My xbox 360 is here no problem on my network in "My Network Places".

  In Media Center, once I typed the 8 digit number it is said that he can not find the Extender. I did the following:

  Reset my router
  Reformat my computer
  Reset my xbox 360
  Double checked I got the right 8-digit number in media center
  Disabled windows firewall
  Went to the tab exceptions and compatible: WIndows Media Center, Media Center Extender, eshell.exe, discovery network
  went to the management of the computer and turned on UPnP device host (changed the startup type to automatic and restarted my computer)
  Permit "filter multicast" in my router settings
  UPnp enabled in my router settings
  Upgrade Vista (with SP1 as well)
  Re-installed the drivers for my wireless card
  Connected to the Xbox 360 WIRED to my router

  Heres the funny thing, I have a Sony laptop vaio with Windows Media Center Edition 2005 on the same network that sees my xbox all the time. Its actually connected through a microsoft extension program (XboxMCE05Lite - enu.exe) basically it works fine.

  One funny thing that may help with my vista (Home premium) Windows Remote Assistant machine fails or the other.

  Any ideas? If this can help, too, this computer is built on the ground.  Sense, this isn't a HP, Dell, Sony, etc.

  Network equipment:
  Router Linksys WRT54G
  Map of Netgear WG311v3 54 Mbps Wireless

  works fine with my other laptop. So I guess that the problem must be my wireless card. I guess that's a PCI card it would have nothing to do with the problem. I'm going tomorrow to buy a NIC. USB Im not in a race simply because my internet works very well without getting a new network card. I am just puzzled and would like to get this to work because I hate running through computer problems and in abeyance. I'll get one tomorrow and let you know the guy.

• Scan to folder installation network - Win VISTA Home Premium

  Printer is HP Officejet Pro 8600

  When I try to install the Scan to folder network on a desktop computer running Win VISTA Home Premium Web page displays the message "Internet Explorer cannot display the webpage".  There is no option to continue anyway.   Under Tools > Internet Options > security all parameters have a default value.

  On my old laptop under Win XP SP3 and newer laptop running Win 7 Home Premium, when I run the analysis of the installation of the network folder, I have to continue, and then configuration page will become available.   Under Tools > Internet Options > security settings are set to default.

  I'm curious to know why I can't have analysis of screen network on Win VISTA Home Premium system folder but I can do on both other systems?  All three computers are on the same home network.

  P.S. as for the Scan to E-mail Wizard, which gives the message that this option is not available on my printer, however on the touch of 8600 printer screen option is there and he tells you how do it.  Scanning to Email app also allows me to scan to e-mail.

  Initially this feature was not mentioned on all models of the 8600, just the models more and premium that you note. However, due to the overwhelming popularity of this HP feature published scanning to email app for the majority of printers who have access to web services.

  I hope that answers your question!