Locking of the

Similar Questions

• iOS 10 no locked out the flashlight and timer on screen

  In the previous version, I could pull up to the bottom of the screen locked and the timer and the flashlight were some of my options, as well as the brightness and change setting, if you're going on a plane.  I don't see how more intuitively.  The great thing now seems to have widgets and you can buy, but none of the above are options and those are the characteristics that I used often on my phone.  I liked that I could set the timer when watering my yard without having to unlock my phone whenever I moved the sprinkler.  Please let me know if Miss me just something.

  Thank you!

  The control centre has now three components. One with the parameters you want is on the left.

• I can't save the messages in the sent folder, there is a lock on the file name

  the messaging engine Thunderbird ceased to save emails in the sent folder, when I checked the sent folder, it was a symbol of lock at the beginning of the queue file. and an error came up saying "error copy sent the file.

  The padlock, which indicated it still, the account uses a secure connection.

  Now

  So that we can better investigate this problem, you need to add a little more non-personal information.

  Please add the troubleshooting information to your post
  To find troubleshooting information:

  • Open the help (or click Help three-line-icon and select)
  • Choose troubleshooting information
  • Use the copy button in the Clipboard to select them all. Do not check box "include account names!
  • Paste this into your post.

  Please also add the result of these troubleshooting steps to your message

  • Thunderbird works in mode Safe TB (see Thunderbird Safe Mode)?
  • Do you use anti-virus software and firewall? What is the version?
  • Who is the email provider?
  • Who is the provider of the internet?

  Please post back with that information and any other questions you may have.

• How to remove the automatic locking of the IPad 2

  How to remove the automatic locking in the iPad 2

  Are you talking about the time it takes the device "go to sleep?

  Settings > general > auto lock > set to 'never '.

• I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

  Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

  Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.

• I found a 6 but iPhone is locked with the iCloud. Is there a way I can use this iPhone?

  I found an iPhone 6 and locks with the iCloud, there is a way I can unlock the device?

  Try to use a phone which is not yours is unethical. Make the police or the place where you found it. There is no way to use a phone that is activated to block without the original owner passwords.

• Why do I suddenly had a lock on the icon and not be able to open Firefox?

  Connected today and found a lock on the Firefox icon symbol. I can't open the program, except if I get out of the sandbox. Why is this? My system is Windows XP pro.

  What software you use to create your sandbox? Maybe someone is familiar with it, or it becomes.

• What is the lock with the circle around it?

  What is the lock with the circle around him at the top of the screen?

  It indicates that the phone is locked in portrait mode. Swipe to the bottom of the screen to call the control center. Tap the corresponding icon there to allow rotation in fashion landscape.

• Digital LOCKING button the LED on CAPS LOCK button - Satellite X 200

  Hello

  I just have a simple question (maybe): I recognized, that by pressing NUM LOCK causes the LED to this key to flash on, ok that is normal, but also the button CAPS Lock LED lights weak.

  Now, when I am pressing the CAPS LOCK LED becomes more clear.
  Turning off NUM Lock turns off the light, it of ok, the CAPS LOCK still burning bright (because he was in a hurry as well).
  Press CAPS LOCK again UPDATE disables the LED.

  More funny thing is: by pressing the CAPS of the forces of the Numlock lock to turn on and the LED of it...

  Any ideas or advice?

  Welcome Juml

  Hello Juml

  I read your ad 6 times now, but I still don t understand your problem. I have Satellite P200 in front of me and try to verify this but everything works fine.

  Please try to explain it again, but please, step by step. I understand what you mean.

• Mini IPad 2 with locked by the former proprietor activation!

  Hi all!

  First of all, sorry for my bad English.

  I'm buying a mini Ipad 2 with an authorized reseller of Apple in Viet Nam. After a fews with her hours, I decided to restore to clean my ipad. But after the restoration, my ipad got activation locked by an email that I don't know, I think it's the enamel of the former owner (my bad, I forgot to check before activating bought lock). I asked the seller but they know not too much information. So I called Apple Support number but it is not anyone can speak Vietnamese.

  So I want to know how I can remove the locking of the activation of my ipad. I read some information I need to provide the invoice and the serial number of one to Apple. But I don't know exactly what are the measures to contact Apple.

  Can someone help me?

  Many thanks and best regards.

  Return it for a refund.

  Only the original owner with the good Apple ID and password can remove locking Activation, no one else, not even Apple.

• HSDIO 6556 loses the lock on the external clock

  Hello

  I'm encountring a strange problem. I use my 6556 HSDIO to generate some model using and external clock (around 20 MHz and 50 ohms impedance). This clock is provided by an MCU and the entire application does not work well. However, when I tried to cool the MCU (up to-10 °) the HSDIO loses the lock and tries to re - lock again (the Red turned led active). When this happens, I can see a new phase shift between the data generated and the external clock, within the scope that is fatal for my application. L ' other, I inspected the data generated looking for a glitch or gigue appearing at low temperatures... Notice anything special... I tried to heat the MCU upward at 100 °, HSDIO does not lock...

  What can I do? 6556 HSDIO is apparently too sensitive...

  Mar1

  Hi Mar1,

  Datasheet public for the chip used in the States of SMU - overclocking 6556 a typical tolerance of jitter of 20 000 ppm, with minimum of 5,000 ppm. For a 20 MHz clock, this corresponds to 1 ns of jitter typical and 250 ps in the worst case. That being said, we cannot guarantee the specifications that are not included in the specifications NEITHER SMU-6555/6556 document because it is not updated with the production trial.

  Best regards

• How to table of waveform of input 1 d in the lock with the amplifier

  I have a LabView application that I have to change to include a lock in the amplifier.  The application uses a capture card of data several times to capture a sample of 0.1 s of two signals (one signal, a single reference) in a laboratory test.  Before the measure was made by the base RMS module to record the VRM in the signal, and the reference is ignored.  However, the measures that I am now the scene run many s a lower and so I would use a simple RECS in the kit OR of.

  I am happy (I think) with the configuration of GARLIC but I am struggling to understand the requirement of input data.  It should be an array of 2D, with the identifited of reference signal.  However, the output of the part of the utility that captures the waveform is a table 1 d of waveform.  Could someone advise me on how to convert the table 1 d of waveform in a 2D table suitable for admission to the GARLIC?

  As you may have guessed that I am a newbie to LabView, I try to modify an application designed and assembled by a former colleague, so I'd appreciate simple suggestions!

  TIA.

  You have separated for each signal waveform 1 d arrays, or do you have a 1-d single waveform chart where signals are separate items in the table? If this is the first, you should do something like the code below. If you have a single Bay, then the code would be similar - you could just use a table of unique Index function. You may or may not need to transpose the table 2D. I don't know what waits for the lock in Subvi - channel data by row or column.

  

• How to see files locked on the servers from a PC

  I need to be able to allow people to see the locks on files on a server, when you move files.  We have an application that runs on the PC, move files on a server.  But it is not in any way claire to see if someone has the file open, or locked in the folder files.  I can see the locks using the Console (MMC) or by connecting directly to the server, but users are unable to perform this operation.  Is there a Windows tool, or a code that I can put together that will solve this problem.  Program in VB6, but who have access to VB.Net 2008 as well.

  Any information on this would be helpful.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2management/threads

• How to make a lock off the internet so I can have another WiFi computer using the internet

  How to make a lock off the internet so I can have another WiFi computer using the internet

  you do not take the lock itself.

  Instead, you configure another computer with security information to access the connection Wireless secure.

  Unfortunately, we cannot help you with this, because we cannot tell if you are the owner of the wireless connection or someone trying to hack it via another computer.

  However, what you can try is to contact technical support that provides your internet service.  they will be well to validate your identity and then provide help or more detailed instructions.

• My dell Inspiron 1150 windows xp password son has locked and the screen will not change, we do not know the password or have we not the reset disk, how can connect to reset password

  My dell Inspiron 1150 windows xp password son has locked and the screen displays the dell logo and says that I need the master password or administrator, my son can't remember and we do not have the reset disk, is it possible to get and reset the password or enter the system

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of your normal connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Tricky

• Where to find the lock of the Pixma MG6320 printer scanner?

  Hello... Where to find the lock of the Pixma MG6320 printer scanner?

  Hi set231,

  PIXMA MG6320 is not a scanner lock switch.  If you try to set the printer for transport, please follow these steps:

  1. turn the unit off.

  2. confirm that the POWER led is off, and unplug the machine.  Please do not unplug the machine while the POWER light is lit or blinking white, as this may cause a malfunction or damage to the machine, the machine impossible to print.

  3. remove the output paper support, and then close the paper output tray gently.  The output tray extension is retracted automatically when the paper output tray is closed.

  4. disconnect the printer from the computer and the machine cable, then connect the plug to the machine.

  5. use duct tape to secure all covers on the machine to keep them open during transport.  Then pack the machine in the plastic bag.  Fix the material of protection to the machine when the machine to pack in the box.

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.