Locking protection with NI 9482

Similar Questions

• Lock protect vmdk was lost by mistake

  Hi all

  I have a server with processor amd fx 8350, 16 GB of ram and 1 TB hard drive. I installed esxi 5 edition eval on it and created 3 vms on it. Everything works fine, but all of a sudden I can't access vsphere client. When I see it, a pop up comes up saying lock protecting the vmdk disappeared and I have only the option to click ok. When I click ok, vm powers off the coast. After branching, it may start or may not start. Again, he gives weird errors if it does not start. Please have look at the error and suggest me how to get rid of him.

  

  When I checked on internet about this vmware kb article says something about the storage. But I internal hard drive of 1 TB of storage.

  Hello

  None of these options worked. So as a work around, I added an iscsi storage to my esxi and moved all the locking of files to this storage and deleted these files in this storage. Now, next time when I try to add the same storage again, esxi said, format and Add... so, my storage is formatted and these files have been deleted. I know it's a very long process, but I m left with the only option...

  Also, I removed the sata cable and reinserted back. Therefore, I don't have this error. Everything is good so far...

  Chaitanya.

• Bug: iOS 10, Siri invades even lock screen with power off

  iOS 10, Siri invades even lock screen with power off

  Since the upgrade to iOS 10 (iPhone 5 s) siri appears when I forgetting to unlock my phone because I'm not used to this way to unlock yet. But siri on lock screen is disabled in the settings. I can close siri all together, but I don't consider it as an option.

  Is this a bug in the iOS 10 or did I miss something?

  Hello nick_ve,

  Thank you for using communities of Apple Support.

  I see that since you have upgraded to iOS 10, Siri starts each time you try to unlock your iPhone and Siri on the lock screen is disabled in the settings. I completely understand, because when I upgraded, it took me a few tries to get adjusted to unlock with the Home key. I'm more than happy to help you with this.

  Press the Home button on your iPhone 5s once unlocks the screen, and freezes for more than one second will activate Siri. It is good to keep this in mind when you unlock your iPhone.

  There is also an alternative solution I would like to share with you. You can disable this option in settings > general > accessibility > Home button. Turn the finger remains open. You can unlock the iPhone with Touch ID without having to press the Home button.

  Have a wonderful day!

• My safari has locked up with a request for verification of the property query.  What can be done to fix this?

  My safari has locked up with a request for verification of the property query.  What can be done to fix this?

  

  This is the shit that came.

  Force Quit Safari (cmd-option-esc) then restart Safari by holding down the SHIFT key.

  Sorry, wrong forum... question thought it was an OS X. In any case don't give them any info.

• How to lock Notes with the new iOS 9.3?

  I could go into the settings and set a password, but I can't understand how to lock notes. Any thoughts?

  See here: keep your notes safe with password-protection - Apple Support

  -AJ

• How to manually lock iwatch with last software update

  The last update, I am unable to manually lock my iwatch

  Hello

  To manually lock Apple Watch under watch OS 3:

  • When you display the time on your watch, drag upward on the screen to open the control center > press the button with a lock icon to lock your watch (you may need to scroll to see it).

• How can I check lock activation with an iPod touch 3rd generation

  How to check a lock of activation with a 3rd generation iPod touch which was given to me

  A third generation of iPod touch cannot be updated past 5.1.1 and will therefore never be activation locked; This requires iOS 7 or newer.

  (143866)

• Firefox locked up with YouTube when using Dragon NaturallySpeaking

  I use Dragon NaturallySpeaking to get all my data into the computer as I am paralyzed from the shoulders down, incapable of any other way to the data. When I click on a link that would be for YouTube or other types of media devices, Firefox and Dragon NaturallySpeaking will lock leaving me place the Creek without a paddle. Short of abolishing the use of Firefox as my default browser, I am open to all suggestions that you may have because Microsoft Internet Explorer is a program that I can't stand using and I use Firefox since its inception and I like except when it crashes.

  Thank you very much and I am open to any suggestions you might have before uninstall DNS because it is a must.

  Bruce

  I noticed a similar problem, which began occurring only recently. If I'm dictating in Firefox use Dragon NaturallySpeaking 8, if it consists in the search bar or in a Gmail e-mail window, Firefox can lock up without warning. The only way I found to recover the problem is to close with force Firefox using Windows Task Manager.

  EDIT: this error message titled 'dd10edit' might be relevant - "COM returned an unexpected error code: details are HOOKERR_CONNOTINJECT.

• Satellite Pro A40 Caps Lock power with many keys on and off

  Hi guys,.

  I have a Satellite A40 and it has become a pain. First the caps lock keys not working, has no importance. Then I realized that if I pressed ctrl + C caps work come, now ctrl c z x c m and v all do caps on or off.

  You can not use!

  I use an external keyboard, which I think will work. Have you tried some form of downloads of this site but it is not changing.

  Any ideas would be appreciated.

  PS I have no games on it.

  Hello

  Well, it's not easy to say why this dysfunction occurs.
  You can try to use the System Restore tool. This can help to set the operating system to the beginning.

  Also if it helps doesn t, I would recommend to recover the operating system with the supplied restore CD. (Please make a backup of your files.) If the problem still the same after this procedure so I think it's a hardware malfunction and you contact the agents of control services.

  Good bye

• How to write data in an Excel spreadsheet protected (with unlocked cells)?

  Hello!

  I have LabVIEW 8.2 and I often use the report Generation Toolkit for Microsoft Office' to save data in Excel spreadsheets. So far, I only used the leaves unprotected.

  But right now, I have an Excel worksheet protected by some cells unlocked. If I open the file using Excel I can fill these unlocked cells without any problem. However, I am not being able to fill these cells unlocked using LabVIEW and the Toolbox. I have a few questions:

  (1) is it possible to use LabVIEW to write data in a protected Excel worksheet, even though she has unlocked the cells?

  (2) if it is possible, how can I do that?

  OBS: I noticed that if I unprotect the sheet, I can write data to the file. But I don't want to be protected and the protection of the sheet, since users will not have the password.

  I hope that I was clear. I really appreciate any help you can provide.

  Thanks for the replies.

  Use ActiveX I could write the cells individually. By doing this, I could write in the unprotected cells without any problem. hour

  Probably, the Toolbox has been activated somehow the overall protection of the spreadsheet and Excel was not allowing writing.

  I had never used before ActiveX, so I had to learn it from scratch. I was looking for some tutorials on the internet but I have not found much information easy. What struck me the most help is an example that comes with LabVIEW named "Excel - write Table.vi. After some tests, I was able to open my data protected from the worksheet and fill in the unlocked cells.

  Thank you guys!

• What is MSE protecting with a firewall?

  My Norton 360 expired recently... Decided not to renew and now have MSE...  Noticed today that my firewall is not enabled...  MSE protect my Pc with the firewall? If this is not the case, what can I do? Also is there anything else I might need to add.

  Really need help, I'm not aware of pc.  Have windows 7 64 bit...

  Moved from feedback

  Original title: fire wall?

  Go to the control panel and turn on the Windows Firewall.

• I have Microsoft security essentials ~ I need more constant guard protection or am I protected with just the essentialsntial of microsoft security

  I HAVE MOZZILA FIRE FOX AS MY BROWSER ~ I'VE BEEN USING MICROSOFT SECURITY ESSENTIALS ~; BUT I INSTALLED GUARD PROTECTION NOW, BUT CONSTANT FEELING I ONLY INSTALLED SOFTWARE, YOU CAN ME SAY WHAT I HAVE TO DO AND WHICH IS THE BEST PROTECTOR

  You really should only use an antivirus product that use an Analyzer to access because they can collide so slow the system down and jeopardize the protection they offer. Manually run standalone detectors are acceptable if used with care and sparingly.

  As for the one which should not be to make a specific recommendation that they have different characteristics that can meet your requirements. Personally, I used AVG, Avast and MSE and now confine myself to the last as a free application base.

  Oh and do not use capitals unless necessary, it is equivalent to shouting on the net.

• Can we have two site protected with unique restoration site?

  I have vCenter running in my site HQ (protected Site) and I have an another vCenter that is running the site of DR (Recovery Site),.

  I did my installation of SR in both sites and everything works without any problem,

  We have a new branch with a new vCenter and we want to protect this site, how can achieve us? We need to have a new installation of MIS on both Sites?

  In another can word you have 3 scenario SRM sites? or it will be a new SRM facility?

  Yes, you can have 2 protected sites and a unique restoration site. You will need a SRM server so many protected sites and 2 servers RS (one for each remote site).

  See:

  Site Recovery Manager 6.0 Documentation Center

  h ttp://KB.VMware.com/selfservice/microsites/Search.do?Language=en_US&cmd=displayKC&externalId=1014640

  If you are interested other topologies you can also see: http://www.benmeadowcroft.com/archive/2015/01/12/vmware-srm-topologies/

  Does that answer your questions?

• Setting view protected with the Customization Wizard

  Hello

  I'm using the last DC Acrobat Customization Wizard and tries to generate a transform file. I was put in safe_mode for all files. If I generate the transform file and reload, I see that protected mode is certainly in all the files. However, when I install Acrobat Reader DC using the transformation in the command line, I see that protected mode is set to Off (default) which is not how it is configured in the transformation.

  How can I make a transformation the mode value protected all files when you install the application? Also, how I apply this setting so that users cannot change?

  Thank you

  Rob

  Well, looks like I found the answer. You must set this political software locking function:

  Tracking Add 'HKLM\SOFTWARE\Policies\Adobe\Acrobat Reader\DC\FeatureLockDown' v iProtectedView /t REG_DWORD /d 2 f > zero

  The addition of this lockdown key view protected for all users. That's what I was trying to find out. I have no idea why the wizard is not programming it correctly.

  I found the info in the below linked document that has been referenced on nsa.gov of all places:

  http://www.Adobe.com/devnet-docs/acrobatetk/tools/AppSec/Acrobat%20Application%20Security% 20Guide.pdf

• Shutdown of R500 protected with SD card problems

  Hello

  I have an annoying problem with my Portege R500. When I try to stop my laptop after it wake up from suspend mode, it freezes and doesn't complete the closing (it stops in the last screen before stopping.
  The funny thing is that this only happens if I have an SD card in the SD slot.

  Can you help me?

  Thank you

  Paulo Oliveira

  Hi Paulo

  Can you please give us more information about your Portege? Maybe the model numbers and BIOS version.