Firefox locked up with YouTube when using Dragon NaturallySpeaking

Similar Questions

• Deal with failure when using LabVIEW 2011 and DSC MODBUS communication

  I'm currently reading from operating records a PLC with MODBUS/TCP. I confirmed that the PLC will update the values and in response to a MODBUS communication correctly by using a third-party program called Modbus Poll. However, when I try to query the PLC using the LabVIEW shared variable engine, I am unable to read the values of the same addresses that I consult with Modbus Poll.

  My installation is simply to a PC directly connected to the controller via Ethernet without a router between the two. I'm using LabVIEW 2011 SP1 with the DSC module.

  I opened the Manager of distributed systems OR to display the State of all variables in the Modbus Library that I created, and I noticed that the ILO CommFail permanently the value 'true '. All other variables with a 'read' access mode signal "failure of process". I tried to restart the process and stop and start the local variable engine without success. I also restarted my computer several times to see if any services did not exist, but this does not appear to have solved the problem.

  Finally, I resorted to listening to communications on the network card I have the PLC connected via Ethernet using Wireshark and found that while Modbus Poll communicates with PLC, number of MODBUS and TCP packet is sent and received. However, when using only LabVIEW or the DSM OR communicate with the controller, there don't seem to be any communication on the network card.

  Something that may be interesting to note is that I could communicate with the PLC and to read values with the DSM just once, when I understood everything first what address I should be reading of. All of this has stopped working shortly after. Prior to this, 'CommFail' was not generally set to 'true' with my current setup. Thinking it was my firewall, I have since disabled my firewall, but this seems to have had no effect on the problem either.

  Any help on this would be appreciated.

  So, I thought about it. It turns out that the IP address of the server i/o MODBUS must be set to the address of the MODBUS slave, not the local computer. The address of the i/o MODBUS server is defined by the navigation in the Explorer window projects, expanding the variable engine shared library for MODBUS and right click on the server MODBUS (for example Modbus1) item and select Properties.

  In addition, the addresses seem to be shifted by + 1.

  Thanks for the tip so.

• Having a problem with artifacts when using Dip to black transition

  I use Adobe first Pro CC on a Dell XPS 8900 with a NVIDIA® GeForce® GTX 745 4 GB of DDR3 memory. Both in the Editor (with all the rendering) and the final video (which I tried to export in several ways), I get artifacts when using the two Dip to black and chained transitions. I did check the sequence settings to match the original film, as I originally had two cameras (ARRI and XDCAM) images. I get the problem on two types of sequences. I tried to convert the original film in .mp4 using a HD video converter and then re-import it. The problem remains. Then I tried to download sequences of archives on the Adobe site and imported. And I still have the problem. I think that it has something to do with my computer as before to get the XPS 8900 I had used an older Dell model (without graphics acceleration or upgrade) and had not not this problem. You can see artifacts in the video below. Strangely, I don't see any artifacts when I used transitions on the titles of lower third or in transitions from outset between title sequences. It is only when transitions are used on real images (and, again, I tried to use other types of sequences and had the same problem). Any thoughts on how to solve this problem would be greatly appreciated.

  I am simply not see something weird.  The transition is quite fast, however.

  Give that DNxHD export/upload to try.  See if you like better.

• Adobe Reader hangs with DEP when using Vista

  According to me, surely someone has found a solution for this now.  Whenever I try to print a PDF file using Adobe or Nitro, the program bombs with the DEP error. The most frustrating thing is that: when I try to disable DEP control (using installation feeding by Vista) - it says that I CAN ' T turn off DEP looking for this software!  Looking at other threads, I feel that this problem be Acrobat with Vista itself. BTW, I already reinstalled the printer (a Canon LBP3200) AND Adobe Reader X.  Is there a solution out there?

  Hello

  Click on the link below and see if it helps.

  http://forums.Adobe.com/message/3317669

  Hope this information helps.

• Problem with microphone when using the speakerphone in 5.1.1

  During the call to anyone... When I press the speaker button to hear a louder voice microphone be cut always... even if I uncheck the speaker button!
  To speak normally without speaker... so, I have to end the call and start a second time to get the mic working!
  What is c?
  Please someone try and post it here...
  We need an update I think to fix this bug with mute mic!
  Please answer me.
  Thank you.

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• Problems with keywords when using 2 directories.

  Pardon my french, I'm Norwegian... ;-)

  I LR3.6 and have a folder structure I am satisfied, I also use keywords on the images.

  Je want a Directory with B /W and an color, in order to work in a directory where only B/W images. I think that itis easier to see the images that work B/w this way...

  J’ai copied the LRCAT file into a new file. When I opened LR I chose the directory to load, B/W or Color. It works OK. When importing new photos I copy images in the desired Directory (for example. Color?) with the failure of development parameters. When I Use the directory of b/w Synchronize the color directory with the black and white default develop settings.

  I imported the same list of key words in the two directories, but the problem , it's that the the key words are not included on all when I sync. The images have the same file name so it should be possible to retrieve / Sync Keywords so?

  Is he is at - it who can help mebe, either with another solution where didn't need 2 directories or how I can import of keywords to another Directory?

  Rather than having the same files stored in two catalogs, you should have to do this as "virtual copy" in the same catalog.

  Now, to sort. To make the backup copies of these two catalogs, then use the file > import from another catalog and check the option create new virtual copies. Then import - make sure you add is selected and not copy or move. We should end up with the two B & W and executions as well as virtual color copies.

• No picture for video playback in WMP12, VLC or QT but don't brush on video playback in IE or Firefox for example with Youtube

  Very strange, recently my main account on desktop PC does not display a picture on the video playback but video playback works fine on any other user accounts on the same PC.  I rebooted WMP12, AMD video card drivers, flash, etc. QT.  Run the WMP rearmament as suggested in these pages.  However, there are no drivers or CODECS because on the other account user video playback works fine.   Windows 7 Edition Home Premium on the desktop with a two year videocard, AMD - all standard hardware that worked well before.

  I don't see what is different in this user account.

  Ideas?

  Hello

  Video content probably uses a compression codec that is not installed on your computer.

  This problem is specific to a particular video?

  Check out these links and follow the steps to solve the problem:

  http://support.Microsoft.com/kb/265523

  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-7

  Please let us know the results.

• Problem with flight when using no call blocking

  Hello
  
  I have a scenario in which I need to call a service several times based on header lines. I used the following approach to reduce the execution time:
  
  1. use flight with "n" being the no. lines in the header.
  2 call the service inside the flow with nonBlockingInvoke set to true for the PL. The assignment of the var of entry for the service takes place inside of flight activity.
  
  The problem with this approach is that the assignment happens correctly. for example. LineId1 is assigned to the service entrance in the first stream, LineId2 the second rate and so more..., but in the used input variable values by invoke remains constant in the first mission that produced the first stream Viz LineId1 will be happened as an input for all activities of other flows, despite the copy in entitled operation happening properly.
  
  Can anyone share some thoughts on this?
  
  Kind regards
  Sandeep

  Hi Sandeep,

  I think the mistake you make is that the defined variable to call the service endpoint (i.e. the input of the invoke activity variable) should not be a global variable, but instead should be defined as a local variable in the scope that contains the activity of flight.

  Concerning
  AYUSH

• Problem with MessageRadioButton when using PPR on this event.

  Hello
  
  I have a requirement where there is two MessageRadioButton
  
  When the 1 MessageRadioButton is selected an element must be mandatory and
  
  When the 2nd MessageRadioButton is selected another point should be mandatory.
  
  The problem I am facing is when I select the 2nd element and going back to select article 1 the selection does not change.
  
  Can someone help me how can I solve this problem
  
  
  Krishna

  Krishna

  In addition to what you've done by program don't forget to set its value unchecked two option buttons.

  Thank you
  AJ

• When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• PC crashes with DBO when downloading a file using Firefox to my iPad

  PC crashes with DBO when downloading a large file via WiFi to my iPad and using AVPlayerHD player on the iPad. There is no report of error in Firefox, just the crash dump Windows 7 due to the accident. Only the combination of Firefox on PC and player AVPlayerHD on iPad causes this crash. Any other combination of PC and iPad works.
  Examples:
  Firefox on PC and iFile on iPad works well.
  Google Chrome on PC works with all programs on iPad.
  Firefoc on PC and player AVPlayerHD on iPad crashes.

  So you get a Blue Screen of Death on your Windows Machine? You have the exact error codes that appear when you get this blue screen?

  Blue screens mean that you have a problem with a driver, hardware or virus on your PC, not with Firefox. I try to launch a program of analysis such as http://www.resplendence.com/whocrashedand see if she can tell you what triggered the accident. Also, make sure that all your drivers are up to date on your computer (especially the graphics driver: update your drivers graphics to use hardware acceleration and WebGL) and check the virus (Troubleshooting Firefox problems caused by malware).

  After that, if you still get the blue screen and crashed does not help, I would say to try to test your RAM with a utility such as http://www.memtest.org/

• The latest Update of Firefox does not work with YouTube?

  On a few days ago, I went on YouTube to upload a video. For some reason, it gave me a message that says "request invalid. Authentication has expired.
  Not only that, if I do other things such as taste/do not love a video, or add a video to my favorites or another list of reading, it is said that the service is not available.
  I also had a problem trying to respond to the other comments in the videos. Anytime I type on my comment and click the post button, it says something like "error, try again."
  Now, when it comes to other things like just watching and looking for videos, I have no problem.

  I thought it might have something to do with the latest update of Firefox, because I tried to use YouTube with other browsers and it works perfectly well, and I was not having problems with YouTube before the update.

  No idea if the update could affect something that causes these questions?

  We have seen reports that causes the extension DownloadHelper 4.9.14 with some features on YouTube.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Distortions of the screen when using Firefox on Android

  Hi, a recurring problem - when using Firefox on my Android Web site, are often distorted. If I try to zoom before to increase the size of police or image during playback, the screen breaks and distorts, with different sections of text and images disappear (black sections of the screen appear) or overlapping, often in a different font sizes. The Web site displayed on the screen as "jumps around." The same thing happens if I try to select text for copy - it is impossible to select all or selection is distorted. I have not had this problem before and noticed only recently. Almost impossible to use the browser now! What is the result of an automatic update of the software? Help, please! Thank you.

  Please try to update to Firefox 38.

• Strange glitch Visual on the taskbar when using Firefox

  Hello

  I feel a strange glitch Visual on the taskbar when using firefox.

  Please take a look at this short video because it shows the problem, it's almost impossible to show in pictures.

  https://DL.dropboxusercontent.com/u/12595174/VIDEO0016.3gp

  I use firefox on Windows 7 Pro 64 bit v36.0.1. Video card is an ASUS R9 280 X using the latest drivers from AMD 14.12 Catalyst Omega Software.

  Motherboard is an ASUS M5A88 with 16 GB of ram and a processor of 6300 FX.

  It is a new construction that I have implemented in the last 24 hours, and this behavior was not present on the system using the same version of windows, firefox and even map chart and drivers. But on another card mother and CPU. Previous Board of Directors has been
  M4A79XTD EVO with a Phenom II X 4 955BE.

  The glitching does not occur when it is on the desktop and firefox is closed. It will not occur when you use IE - 64 nor does it when I am using the steam software or any Explorer windows/opening files.

  All the motherboard drivers are installed correctly, the integrated graphics card is disabled in the BIOS. I disabled the settings of firefox for hardware acceleration, smooth scrolling and text... to see if it was the question. It wasn't.

  I'd appreciate any help to solve this... Really, I don't want to use a different browser but it's bad enough and quite distracting to really annoy me, and I don't see any alternative.

  Thank you very much.
  H

  Hi jscher2000

  I was about to post a reply, because a friend suggested that maybe that's a rendering of issue rather than a firefox one video card even if it's strange how it affected firefox only. I didn't have a chance to test it on Chrome as it is a new construction and I don't want to install the software, I do not use.

  I went to the Manager of catalyst and had a glance to the settings. I changed something, but no help... I then started to make a simple change and test until I found that the activation "gpu up-scaling" in the properties of digital flat screens has solved the problem.

  I am now free twinkle

  Thanks for your quick response however.

• Outlook has started to get a connection not approved when using firefox

  Outlook started having no reliable connection error when using firefox. Not sure why it started, but all the few minutes that it times out and I have to re - open outlook from google. He does not receive this error on IE or firefox android. I use win 7. I talked with microsoft and they say it's a problem of firefox not outlook.

  I tried the things:
  -Updated firefox
  -Updated antivirus
  -antivirus scans
  -disable the anti-virus
  -from firefox in safe mode.
  -clear all the cache and history
  -Disable all add-ons
  -system restore
  -past by mistake "untrusted connection" on the help of mozilla (does not solve it. There is no option to allow the certificate)
  -search on the net for a similar problem (found nothing)

  So far, it has been like this for a week and its starting to piss me off as it happened out of the blue.

  I solved the problem for someone else who has the same problem.

  Options - troubleshooting information - reset firefox