LogFilter Condition

Similar Questions

• Add LogFilter match string for the subject line of the e-mail notification

  Hello

  On the LogFilter alerts, I add the matching string in the subject line of the e-mail logfilter alert notification. I followed KB 75058 for this requirement. But I'm getting other data also with the match string. Please find the attached screenshot. The chain is marked in yellow. I don't need data which is marke red din. Can you let me know if a setting can be done in the script that retrieves the hitstring so that only the histstring appear

  FMS: 5.6.4

  Kind regards

  Roshan.

  Additional accessories:

  • HitString.txt.zip
  • Logfile.PNG

  Hi Roshan

  We do something similar.  We have configured a Message appropriate for each matching string user:

  

  Then, in the rule Condition, I created an expression UserError containing the following:

  def controls = checkObservationAlarms (#LogFilter_ErrorVerbose to 1ms #,)

  {the entry->

  If (entry.get ("Severity") == "WARNING") {}

  return 2;

  }

  If (entry.get ("Severity") == 'CRITICAL') {}

  return 3;

  }

  If (entry.get ("Severity") == "FATAL") {}

  return 4;

  }

  return 0;

  },

  {entry, severity-> {switch (severity)}

  case 2:

  Return entry.get ("User_Message");

  case 3:

  return "" + entry.get ("User_Message") + "";

  case 4:

  return "" + entry.get ("User_Message") + "";

  by default:

  Return ' ';

  }}, @foglight_rule_id);

  If (checks.size () > 0) {}

  return checks [0] [1];

  } else {}

  Return ' ';

  }

  By referencing @UserError in the subject line, I get the Message to the appropriate user.

  I also do a similar thing for the severity of error appropriate in my subject line.

  Hope this helps

  Brian

• LogFilter

  I want to change the status of the LogFilter Agent. It's a simple, I want to change the particular monitor a server and rule non-global. This is the condition

  checkObservationAlarms (#LogFilter_ErrorVerbose to 1ms #,)

  {the entry->

  If (entry.get ("Severity") == "WARNING") {}

  return 2;

  }

  If (entry.get ("Severity") == 'CRITICAL') {}

  return 3;

  }

  If (entry.get ("Severity") == "FATAL") {}

  return 4;

  }

  return 0;

  },

  {entry, severity-> {switch (severity)}

  case 2:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  case 3:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  ("I might just add scope.get("agent/host/name ") == 'batman' at the beginning of this one?

  Brian,

  Yes, my screenshot was mainly the example query scope.

  It's the easiest way (in my mind) If Ann wants to only have logfilter agent monitor specific servers. Now, it could change the logic of the rule, but logic had to be inserted to check the Observations that can be made and then return an error 0 for all servers that should not work on the logfilter query settings.

  David Mendoza

• Looking for an example of a rule FMS to the process that matches LogFilter

  Hello

  am looking for an example of a rule that manages different LogFilter matches?

  I installed a handful of filter string matches a logfilter officer and was looking for an example rule that could read the Message string for the user and manage each matching filter separately.

  So, I would have 4 match of different styles in an agent instance filter a log and would manage each game separately.

  The only rule of type existing LogFilter I found on the system had what is stated below in the part of the rule Condition:

  checkObservationAlarms (#LogFilter_ErrorVerbose to 1ms #,)

  {the entry->

  If (entry.get ("Severity") == "WARNING") {}

  return 2;

  }

  If (entry.get ("Severity") == 'CRITICAL') {}

  return 3;

  }

  If (entry.get ("Severity") == "FATAL") {}

  return 4;

  }

  return 0;

  },

  {entry, severity-> {switch (severity)}

  case 2:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  case 3:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  case 4:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  by default:

  Return ' ';

  }}, "542c111ff5feabe3803bccb722386cae") () .size > 0;

  ----

  But I don't know if I need to change it it seems to be some sort of standard boilerplate for this type of rule.

  I need to be able to key off the field to the user Message.  So even if I have 1 rule for each 4 journal of my agent logfilter properties filter models, it's ok.  I just need to understand how to do a test for the rule based on the user Message field values or extends its reach to this particular user Message string.

  I'll post a picture of the logfilter message strings.

  So I would look on the way to have a fair rule match the logfilter agent when the returned string is "ECG_Java_Memory_Error", then I would have another rule for each of the other models in the returned string.

  Looking for an example of a standard type.

  Thank you

  "mark".

  It is the major brand

  David Mendoza

  Foglight Consultant

• LogFilter creating alarms, but not email action shooter

  Hello

  I came across a problem of "e-mail action" today as he tried to implement the rule of the Logfilter agent. I copied the outside "LogFilter' box and personalized just rule to change the email address.

  The address that I use is the same I have been receving emails everyday with success on other rules.

  I also see alarms, created by the Logfilter rule, but action will not fire.

  I have fire action on 1 consecutive evaluation with a schedule of "Always". I don't know where is the problem. I tried to create a support package to look at where the e-mail action is a failure, but did not.

  Please can someone help?

  Thank you very much!

  APO - Barro

  This is the condition

  checkObservationAlarms (#LogFilter_ErrorVerbose to 1ms #,)

  {the entry->

  If (entry.get ("Severity") == "WARNING") {}

  return 2;

  }

  If (entry.get ("Severity") == 'CRITICAL') {}

  return 3;

  }

  If (entry.get ("Severity") == "FATAL") {}

  return 4;

  }

  return 0;

  },

  {entry, severity-> {switch (severity)}

  case 2:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  case 3:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  case 4:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  by default:

  Return ' ';

  }}, "542c111ff5feabe3803bccb722386cae") () .size > 0;

  And "text" variable of severity assessment

  createObservationAlarms (#LogFilter_ErrorVerbose to 1ms #,)

  {the entry->

  If (entry.get ("Severity") == "WARNING") {}

  return 2;

  }

  If (entry.get ("Severity") == 'CRITICAL') {}

  return 3;

  }

  If (entry.get ("Severity") == "FATAL") {}

  return 4;

  }

  return 0;

  },

  {entry, severity-> {switch (severity)}

  case 2:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  case 3:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  case 4:

  return "" + entry.get ("LogName") + ":" + entry.get ("Error_Message") + ""; ""

  by default:

  Return ' ';

  }}, "542c111ff5feabe3803bccb722386cae");

  When you have copied the LogFilter rule, have you changed the id of the rule which is in the last line of the State? If you do not change this rule id, the copied rule will not be triggered.

• Conditional highlighting with checkbox in the two cells by the numbers

  I have two columns.

  Check boxes, the other contains text.

  I want to apply formatting conditional for text, based on the checkbox (true/false) value.

  Hi Bebaj,

  Add another column (C in this example). You can hide C when everything works.

  

  Formula in C2 (fill down)

  = IF(A2,B2,"")

  A tick in a check box inserts the value of B in C, another "" (NULL)

  Conditional highlighting in column B

  

  Kind regards

  Ian.

• Unable to accept the terms and conditions of the icloud

  My iPhone IS / 10.0.2 IOS does not allow me to accept to iCloud and conditions: therefore, not able to connect to the Apple ID server and cannot connect to Wi - Fi. I have already change network settings - did not help. Erase all content and settings & restored - did not help. Do not connect to a Wi - Fi network didn't happen until I applied IOS 10.02. iCloud question began the week last while on IOS 9.35 - thinking update IOS would be the solution - NOT.

  Try a reset.

  Reset device

  Try a reset.

  Reset - iPhone 7

• Hello, I have an old macbook in bad condition, I have been editing on final cut pro (6.0.6) I need to know if I transfer my final cut information in the time line, he transferred to another computer?

  Hello, I have an old macbook in bad condition, I have been editing on final cut pro (6.0.6)

  If I buy a newer computer (macbook)... with a NEW version of final cut... If I transfer all my info from my hard drive to the new computer, and if this newer computer has a new version of final cut pro, it will always show my "timeline" I have... to remember all my files?

  If not... If I buy the same old version of final cut (6.0.6) and any transfer to another computer, my files will appear exactly as they did when I just changed my project?

  Thank you for your help, if you need more information to answer this question correctly, please ask.

  JO

  I asked that your post be moved to:

  Final Cut Pro X

• May not accept the terms and conditions, try to

  Hello

  IM trying to update my subscription to an application and I get an error that indicates that I must accept the new terms of Apple and Conditions but brings me to the possibility of accepting these terms and conditions as I normally get.

  I restarted twice now and I'm still not able to do.

  Thanks for the help.

  Have you tried to sing and then again in the app store?

  1. Open app store
  2. Scroll to the bottom of the page
  3. Click sign out
  4. Click on connect

• How to remove Code condition on iwatch after the last update

  How to remove Code condition on iWatch after the last update?

  Hello

  On your iPhone, in the application of the watch, go to: My Watch (tab) > password - tap on disable password.

• iOS 10: unable to update the applications due to Conditions General timeout

  I updated my iPhone 6s to iOS 10 a couple of days and now seem to be unable to update applications. The issue seems to stem from a prompt to read and accept the new "Apple Media Services terms and Conditions." When I click the button to proceed with conditions, a new empty window appears and then things churning just until the request times out (see photos). The same thing happens when I click on "View the apple ID" in the app store or through settings, even if in this case the terms guest does not appear and it charges only up to the time limit. It seems to me that the problem lies in the redirection of the terms of apple. Anyone who has experienced this since the update or does anyone have advice?

  I already tried things:

  -force settings, closed and app store

  -restart the phone

  -disconnected and signed apple ID (this feature works in the app store and the parameters)

  -tested 'show apple ID them' on the phone to my wife (6 s on the same wifi network), successful but the phone still is iOS 9

  -tested "show the apple ID" via iTunes with my macbook, successful and I seem not to be invited to accept the new conditions

  Thank you!

  

  Post edited by: cstrand_apple
  Added pictures and corrected typos

  The issue seems to have resolved itself. The terms and conditions page is loaded and now updates are allowed. Just a temporary problem, I guess.

• How to accept the General conditions

  Can how I accept terms and conditions? My iPad and my phone ask me ' apple media services terms and conditions have changed.

  before proceeding, you must read and agree to the new terms and conditions

  ccancel/ok

  then nothing

  Hey lindafromnewark,

  I ran into something like this before, and usually a reset will solve the issue.

  You can watch notrestart your iPhone, iPad or iPod touch to see how to reboot your device.

  I'm sure that this will solve your problem.

  See you soon.

• sum. If to check two different conditions

  Hello

  I have this worksheet to work overtime, I was paid to check that it appears in my payslip.

  

  Is it possible to use SUMIF or something similar to see if the checkbox next is pressed, then return the values in another table but divide it into different rates?

  

  By using the SUMIF calculation general I can return the total number of hours back but not sorted into the different rates. Not sure if this is a bit complicated for numbers.

  Thanks in advance

  Rob

  Use the sumifs() function which will add lines to a column when corresponding lines in the other column corresponding to ALL the conditions

  for the Table «Payslip calculator»

  change the first column to remove the 'x' and make the value correspond to those in the "Rate" column in the table "exceptional overtime."

  

  B2 = SUMIFS (hours additional Outstanding::D, Outstanding::H, TRUE of overtime, hours additional Outstanding::E, A2)

  It's shorthand dethrone select cell B2 and type (or copy and paste it here) the formula:

  = SUMIFS(Overtime Outstanding::D, Overtime Outstanding::H, TRUE,Overtime Outstanding::E, A2)

  Select cell B2, copy

  Select the cells B2 at the end of column B, paste

• whole line on the value of conditional formatting

  Hello, I'm a numbers file where I have a few lines filled with values and when a specific cell will fill with a X in the entire line must be indicated in bold.

  A                  B                                 C             D

  01/01/16 operation 1 1,500,00 X (line entire "BOLD")

  01/12/16 my 500.00 X (line entire "BOLD") operation

  18/02/16 your 300.00 (not FAT)

  How can I do?

  Hello Gian,

  Conditional highlighting depends on comparing the contents of the cell to be highlighted a fixed value or the value in another cell. To highlight an entire line, using a change in the style of text, you need to highlight every cell in the row.

  This means that you must provide something to compare the value in each cell. The simplest is to provide a second cell in which the value of the cell to be highlighted is copied on the condition that triggers the highlight.

  

  In the table above, the formula set out in the table below is entered in cell F2, and then filled up to the 5 row and full right of column J.

  The result is that IF the cell in this row of column D contains an X, the contents of the cell for this cell is copied in this cell, otherwise, this cell contains a string NULL.

  Each cell in columns A through E is the same conditional highlight rule:

  When the text (A2)

  is (the same as the text in) F2

  A2 "BOLD" text

  Select cells A2 - E5, Set up the rule for cell A2 and do not "preserve row" or "preserve the column.

  Columns F to J can be hidden.

  Kind regards

  Barry

• Index and MATCH with several conditions

  Hi all! I hope I can explain what I'm trying to do here clearly. This is my first shot:

  In the table below "Office entry Worksheet - area 1" I am trying to insert a formula in column B which will result in an answer ' true / false ' and be used for conditional highlighting

  

  The first condition that must be met is that the checkbox in the table "Labor and material Checklist" column A or check, if it is not checked, then move to the next line. If the box is checked, then the following condition would need to index and match with column C of table "Office entry Worksheet - area 1" in column B. If there is a match in column C, then move to the next line of column B in the table 'labor and material Checklist '. This continues until there is a 'match', then highlight column B in the table "entry Office sheet - surface 1" in red (or something like "MISSING task")

  It is an estimate and the idea is to ensure that the Phases that are checked in the table "Labor and material Checklist" will not miss when you use the table "entry office map - zone 1".

  Thank you very much for your help!

  Tim

  

  Is it possible that I can download this spreadsheet file?