Logical switches NSX and the VGT Mode

Similar Questions

• Please, I m using a Logic Pro 9 and the key "Advanced"(tools) does not seem to me in the 'preferences'. ". Why? Help!

  If please, I m using a Logic Pro 9 and are looking for the key "Advanced" (tools) but doesn't seem to do not for me in the 'preferences'. ". Why? Help!

  Because there is no mode "Advanced Tool' to Logic 9.

  Logic 9 is always and only has an advanced mode, there is no other method.

  Advanced tools (and their duty to be checked) was a ridiculous logic X when it was released.

• 15 - p112ne: HP 15-p112ne: port msata and the AHCI mode

  Hello.

  I think to upgrade my laptop HP 15 - p112ne. I want to buy SSDS. So my first question is, if this model has msata port available on the motherboard. And the second question is, why I did not in the BIOS SATA mode selection? Because then I would switch to AHCI mode.

  Thank you.

  Here is the Service Manual:

  Manual

  There is no port mSATA on this model. Page 94 shows how to get into the hard drive Bay to replace the hard drive with an SSD.

  This video will be helpful, too:

  http://h10032.www1.HP.com/CTG/manual/c04427554

  The BIOS is constantly on ahci. You don't need to play with it. If you need more help with this return ticket.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compatibility Mode and the XP Mode in Windows 7

  I got a little confused on the Compatibility Mode with XP Mode in Windows 7. Both allow you to legacy Windows run in Windows 7. As far as I know, the former just request that you go to your legacy application that is already installed in Windows 7, get his property and check the box Compatibility Mode and select your old Windows OS (Windows XP, SP2) - that seems without any requirement of additional beyond your Windows 7 operating system HW/SW; But this last request additional 1 GB of RAM and also installation PC Virture Mode before you can run XP Mode. Are the two modes of the same thing or different? It seems that Compatibility Mode is to each legacy Windows application, so no additional HW/SW and XP Mode is environmental BONES together. Is this fair? Appreciate if anyone can clerify this.

  Hello

  No, they are not the same.

  Compatibility mode allows you to run software simply, as say you, selecting Properties and then compare the compatibility mode and select the appropriate operating system to run this application. As you say 'no additional SW/HW prescription.'

  XP Mode is, of all intent and purpose, a virtual machine mode. You must first install Virtual PC software and then, after you have created a machine virtual, you install your software and it works as if it is running on a separate computer - hence the need for a 1 GB of additional RAM. The 1 GB of RAM is allocated to the virtual machine. If you say 4 GB of RAM then your PC would use / 3GB and your 'virtual' PC would use the other 1 GB.

  It is also interesting to note that your PC has also therefore support XP Mode, if it isn't then XP Mode cannot be installed.  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk; Web: http://xphelpandsupport.mvps.org; Web: http://vistasupport.mvps.org;

• Unable to connect after live password change and the airplane mode is on...

  I have a huge dilemma here

  I change my live password and before turning off my Surface RT was in airplane mode IT

  Now when I try to log on my RT Surface, it is rejected with the message

  Your PC is in offline mode.  Please sign in with the last password used on this PC

  But I'm trying with the old password and the message remains displayed

  An advise please!

  Hello again,

  BitLocker can be the thing to aim for. Airplane mode is so new that there probably isn't much (if any) documentation on how to change these settings in command line.

  I tried everything I could according to tiny knowledge I have of the technical aspect of the Surface RT

  so I finally made a Reset which has no less then 02:45 hours to return with all the tweak, settings, installations and updates, I had on my Surface.

  I'll never use this button to plane more until my Surface RT death even if I'm on a plane that will soon be passing.  I prefer crashing somewhere than to have to redo this RESET the horror!

  Hope one thing.  Microsoft should listen to this carefully:

  Do the airplane mode with any available behind the lock screen internet connectivity just before sign you so we can ensure that we're not stuck outside.

  Oh yes you suggested to have another user as a Local account. Well, maybe, but let's say that a lot of people don't want to have another user on their Surface, even if it's to be safe outdoors.  I don't even know if it would have saved my butt anyway.  I have my lesson for good.

  Mark this answer - Yes not exactly an answer that someone would want to read.

• Lightroom will not work on the computer after payment has failed and the new mode of payment put in.

  Adobe will not work.  Lightroom need to work.  Tried to uninstall Lightroom and creative cloud, they stopped working when my payment failed.  After putting in the new mode of payment that they still do not work.  Now don't reinstall it on mac 10.10.5 after several attempts and reboots.  Also, if anyone knows a phone number for adobe support.  I tried to find one, but it just shows that I have are not eligible for phone support... I pay for a product, I can call someone!

  allow a day of pst for your payment to process.  It is currently Saturday am pst.

  then check your account to see if it's what you expect.

  Otherwise, contact adobe support during the time pst by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  If it shows your subscription is current, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• The virtual machine on the logical switch NSX cannot communicate

  Hi all:

  My switch logic has been created and two virtual machines have been added, the virtual computer network are also connected to distributed port group, but the virtual machine of two Ping unreasonable. Two virtual machines can solve their MAC, the firewall is closed at both ends. Who can tell me why.

  Thank you very much

  Two things:

  1 try to run a traceflow between the two involved VMS network cards.  This should show you where the ventilation that is happening.  It might be a rule DFW or VTEP cannot speak for some reason any.

  2. its possible that the netcpa service is hooked on the host.  This is the process that communicates with the controllers.  For the involved hosts SSH and run the following command:

  restart the /etc/init.d/netcpad

• Satellite A500 - switch WLAN and the FN keys does not turn the wireless

  I have currently problems try to activate the connection Wireless on my laptop. My laptop model is a satellite A500 PSAR9A O2J001. My laptop's physical wireless switch does not work and neither my Fn keys don't work (none of my function keys work not at all). It was awhile I saw an orange light next to my mobile switch indicating it was on, but one day, it's just off. Since then, I was not able to reactivate it after a lot of searching on Google, and this place is my last resort after doing so many things.

  Any help or comments would be appreciated, I am very desperate to solve this problem for studies.

  Your description is OK but rather general isn't easy to say with certainty what the problem is here.
  Is the card properly installed wireless (Device Manager)?
  FN keys work in general? You can use other keys FN + Fx? You see flash cards when you press the FN key? If so what options you see when you use FN + F8 (WLAN I think)?

  When you move position WLAN communication works and use the FN + F8 to what exactly happens?

• Microsoft Windows Build 6001 Service Pack 1 on top of the center of my screen and the TEST MODE on four corners

  After a call to technical support to connect a new printer, I now Microsoft Windows Build 6001Service Pack 1 on the top of my screen. TEST MODE is in the four corners. Technical support HP said it was easy to remove, but would not tell me how without purchase. I have Windows Vista. Can someone please? Thank you

  Type msconfig in the search box and press on enter.

  Make sure that the Normal startup is selected on the general tab and Safe Boot is NOT selected in the Startup tab.

• Workstation 6 and the XP Mode from Windows 7 Pro

  Hello

  I wonder if somone can offer some advice?

  I am running Workstation 6.0.2 build 59824 - I recently created a Windows 7 professional virtual machine under the ' option (experimental) Edition of Windows Server 2008 x 64. Successfully installed Windows 7 and it works fine.

  However, I now have a need to run it in XP Mode to run legacy applications.

  I successfully installed XP Mode, but when I run it, I get this message:

  Cannot start windows virtual pc because hardware virtualization support is disabled.

  I downloaded the utility HAV to check if she is capable of hardware virtualization, which checked OK.

  My PC is a HP DX5750 (AMD Athlon 64 X 2 Dual Core 4200 +, 2.19 Ghz, 3.00 RAM).

  There is an option in the BIOS called "Virtualization Technology", which I ACTIVATED.

  But I think there may be something I need to change in the VMWARE Workstation environment, perhaps in the vmx configuration file?

  I'd appreciate any help you can give me.

  Thank you.

  Dave.

  Workstation 6 is not virtualize vitualization material assistance of the physical processor features.  To do this, it should be at least Workstation 8 and an AMD processor with the IVR support.

  However, there is a patch for Windows Virtual PC that will allow the use of binary translation instead of hardware-assisted virtualization.  See http://blogs.msdn.com/b/virtual_pc_guy/archive/2010/03/18/windows-virtual-pc-no-hardware-virtualization-update-now-available-for-download.aspx

  It will be slow running a VM nested this way.

• [Bug]? Line and force the comparison Mode

  It seems that changing the Mode of comparison of the IR & C function with the tables or Clusters attached does not Type of spread, or anything that is responsible for the selection of the instance.  By example, if I combine three tables at the entrances of IR & C, change the comparison mode for comparing aggregates, and then create an indicator of the range in? output, the result is the wrong indicator and a cut wire.  Similarly, can I change the mode on a function IR & C with a wired in the range? output and it will not break the thread until a subsequent change triggers a recompilation or type of spread.

  LV10 (no SP1) and Win7.

  Hi Darin.K,

  I was able to reproduce the behvior you see in LabVIEW 2010 SP1. If the tables are entered and the comparison Mode is the change in the creation of 'Compare the aggregates' indicator will incorrectly create an array of Boolean flags wired to a single Boolean result.

  This was previously reported in a request for Corrective Action (RCA) and the behavior has been corrected in LabVIEW 2011. Thank you for taking the time to report the problem and apologize for any inconvenience it caused.

• the iPhone camera App is not memorize the recording mode

  Hello

  I use the default photo from Apple on my iPhone App, especially because I can shoot while the iPhone is locked. No other applications can do that, not even using the Notification Center (other applications for registration as Strava can do it, but not to record video).

  However, I noticed that most of the time (but), mode (video, panorama, photo,...) is not like it was before.

  I turn almost only videos (idling, when outdoors). Whenever I start the camera application, either in the "sweep upward" screen (locked phone), or from the home screen in unlocking the phone, the camera always (or almost) default is still Photo. I have not found a way to default to the video.

  When you have to take action, it is very annoying to have to fumble with the buttons until you can actually draw. Not to mention that the app is so slow that initialize in the meantime, you cannot drag on the video mode (until the camera is completely initialized); then you drag too and the video mode Miss... it's a mess...

  However, sometimes, apparently when you start the camera after making a video, the unit starts in video mode... but you expect it to start in photo mode, you can already drag by anticipation and video mode Miss yet :-)

  The behavior is not very consistent.

  Unless there is something that the camera behave correctly, I think apple should seriously improve at least 3 things in the camera application:

  (1) in previous versions of iOS, the initialization of the camera was not otherwise slow. How about you do it as fast as it was before?

  (2) pass from still photo to video, then to move slow takes too long. The control must be more effective and faster. You should have a faster and more direct access to the different modes of recoding. How about a configurable "by scanning screen?

  (3) the camera app to set the frequency of default images for videos. What about settings for the default recording mode? (video, panoramic)

  Hi there redtomato,

  I understand that the camera on your iPhone app will automatically in video mode you want. If I always had to take videos, I think it would be very convenient to open the camera in video mode application every time I opened it.

  I tried what you said on my end, opening the camera my screen lock and video mode change application then blocking of my iPhone, and then repeat the same steps. Surprisingly, when I conducted my test of the camera to video mode application.

  I'm quite uncertain that if if it is a small problem with iOS, or if it was something that apple designed specifically, or maybe I'm just having chance repeating the steps you mentioned. To help troubleshoot your device, I recommend you to make sure that you use the latest version of iOS if your device is up to date. Once you have done this, try to restart your iOS device and see if you're still having problems.

  On reflection, maybe you can force the camera app to quit smoking? If this is the case, this could explain why you may need to manually change the camera in video mode application each time.

  I think your suggestions are great ideas, and if you want too, you can submit your ideas to Apple directly here: http://www.apple.com/feedback/.

  I love my iPhone and I like the camera on it and especially photography, so I can understand how you feel about the inconvenience, but I really hope the information I've provided help it it, otherwise, if all goes well it will be or is somehow.

  Continue to take great videos!

• When the privacy mode is enabled, each its own separate tab is? A sneaky cookie created in a tab will be seen by another tab? Tracking cookie of some item hidden on one page can be seen on another website, if its open in another tab?

  Is a tab as a separate instance of the VM when privacy mode is enabled? Independent 3rd party cookies goes out. (They are). This type of behaviour can be turned on?

  In private browsing mode all cookies settings are the same as in normal mode, so all open tabs and windows share the same set of cookies.
  
  The only difference is that you do not have access to cookies created in normal mode (you get a new set) and the session mode PB cookies are never saved on disk and are deleted when the end of this session of PB.

  There are extensions that allow obtaining a whole independent cookies, drank, I don't know how they work in mode of PB.

  • Multifox: http://br.mozdev.org/multifox/

• Why the AHCI mode is disabled in some models of Satellite P200/205?

  Hello.

  My laptop model is Toshiba Satellite P205-S6277 (PSPBGU-00W016B). Chipset Intel 945 PM Express, Intel 82801 GBM (ICH7-M).

  According to the information of the intel.com my laptop processor / chipset are fully compatible with the AHCI mode. But my SATA controller works in IDE compatibility mode and there is no way to enable AHCI SATA mode in the BIOS.

  So I have two questions correlated.

  1. why this AHCI mode is completely disabled by the BIOS? Is it possible to activate this mode in future versions of BIOS?

  2 If this mode is completely disabled by the BIOS in the models of laptop of all PSPBG and PSPB0 then why Intel Matrix Storage Manager (driver that improves the functionality of the AHCI mode) is available at downloads driver recommended for these series of laptop on sites European Canadians, Toshiba and even specially for my Toshiba laptop model on the site?

  I already posted the same question to the site we Toshiba but unanswered for a month.
  Maybe there is someone who is able to answer this question?

  >.. There is no way to enable AHCI SATA mode in the BIOS.
  How you tried to activate it exactly?
  I have Satellite P200 and the two modes are available. I have model laptop but can not imagine that the AMERICAN models, or models even Canadian work on a different path and BIOS must be the same.

  Toshiba service best place where you should ask for help. Call them and ask for explanations. If you are right and the AHCI mode is unavailable, they know why.
  Over the past 3 years I have worked with 4 different laptop models and all have absolutely identical SATA settings.

• How can I pay the last mod to a file

  I get the last mod of a file (file advanced range of I / O-> information file)

  My problem is, I download files from an FTP server and the last mod of the downloaded file is not the same as on the ftp server (the local file always has the timestamp of downloaded time).

  I can list the timestamp of the files on the ftp server, now I want to change the last mod to my local file in the same as on the ftp server.

  How can I do this?

  Thank you

  Concerning

  Thomas

  Hello TheDharmaInitiative,

  The "last modified" attribute of a file can be changed programmatically using Windows API functions.

  For LabVIEW, I found a Post in an external Forum with a few attached Sourcecode:

  http://www.labviewforum.de/index.php?s=c221d30094bfb9bd1edf87094f851b7f&showtopic=5895&St=0&p=28501&...

  For VB, an example of source code can be found here:

  http://www.vbmonster.com/Uwe/Forum.aspx/VB/31547/setting-a-file-s-timestamp

  To change the "last modified" manually assigns a lot of free software and Open Source tools are available:

  http://www.codeproject.com/kb/files/timestamp.aspx

  Concerning

  Moritz M.