Logo cracked apple and damage to housing, it will prevent the Mac work

Similar Questions

• Update Windows Installer is dead & now: 0x0000007B blue screen (0x80399BB0 0 x 0000034 0x00000000 0x00000000) AND a fix will prevent the system from starting.

  I was installing updates of windows and the computer is dead in the middle of it.  When I turned it back on it brought me to a blue screen with error codes: 0x0000007B (0x80399BB0 0 x 0000034 0x00000000 0x00000000).  It prompted me to do a system restore or to get to the system recovery, however it shows that there is no available restore points (even though I know that there are a bunch of them... because I checked this before I tried to make the updates of windows).  I went into the system recovery & the scan of my system with a scan of the additional memory, and there is nothing wrong with my real hardware.  The error recovery of the system that was given to me after the scan of my system is "a fix prevents the system to start.".  I looked at different positions in line with methods to get around this, but none of them does not seem to work.  Vssadmin does not appear on my system to try to use it again.

  I also tried cela http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/8b3e2550-c174-486f-b5dc-98260abc05f9, but as I mentioned before all my restore points have disappeared and when I try not to make method 4 there is no pending.xml file and these registry entries do not exist: HLKM\Offline Components\AdvancedInstallersNeedResolving, HKLM\Offline Components\PendingXmlIdentifier.

  I'm almost done try all this and ready to make a fresh Windows... Install but I hate to really do this knowing that everything was working fine before all this & my hardware is fine... If I could just figure out how to get rid of this darn update all this hangs then all would be well.  Anyone have any suggestions?

  Thanks in advance,

  Phatty

  Hello

  When a computer dies in the middle of an update, it often corrupts many system files leaving no other choice than to reinstall. This is why it is always recommended that laptops/notebooks be connected when you install updates. If Windows was trying to replace a critical system file when the power is off, there are very little that you can do to fix it. If possible, start with a system for the Recovery Console disk and try running "sfc/scannow" to correct or replacement of the damaged system files, but does not satisfy, you are faced with a relocation.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• After windows auto updates can't open Internet Explorer, but can open firefox. Vista Home Premium, CA Security Suite. Can do system restore and get on, but it will update the next day and problem reports.

  I get a popup to firewall this tells me Internet Explorer tent to access internet I click on allow but get no results. Then I get this page can not be displayed, and you are not logged as an administrator

  Hi Snoopy65,

  Welcome to the Microsoft Answers site!

  Perform a system restore and then try to install each updates manually one by one. Each time that you install the update, restart the computer. Take note of the update that is causing the problem and let us know. We will be in a better place to help you if we know the exact update which is causing the problem.

  To run the system restore

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't connect to my mac because the SHIFT key is down. Then he showed the top letter and can not connect... The mac is also overheating. I went to the apple store and they said that they cannot fix and need to send to the factory. Connection of same slo

  I just used my mac. I bought it on January 2014.

  A few months ago I couldn't connect to my mac more. There is nothing special on my mac to record.

  He was showing the wrong password when I tried to connect to my mac. It is overheating sometimes without help.

  So, I brought it to the apple store and they said that the shift key is down and therefore superior letter is all the time. and they could not help me open on the inside. Apple store guys suggested me to display somewhere or send it to the factory.

  My question is

  (1) what should I do

  (2) if I send to the factory or should go to the repair shop.

  you guys have an idea what the problem with my mac?

  I suggest you send to the factory, or if you have an apple authorized dealer / repair shop to fix the SHIFT key first, then a glance as to why the fan is still running hot.

  Maybe something has damaged the keyboard (shift key) area and also the fan internal.

  You can't have something special on the computer, but I'd always spend extra money to repair.

  The sooner, the better.

  If you need take photos or documents off the power the computer have you tried to connect an external keyboard to type your password?

• I can't beyond password entry to update the adobe flash player. I tried my password apple and even used a new adobe password. Nothing works. I have a mac pro. What I do?

  See above question

  What userid & password should I install Flash Player?

• Running Max OS 10.7.4. And Firefox 14.0.1. If the Mac is left idle for some time, Firefox window shrinks, moves to the bottom left of the screen, sometimes disappears.

  In addition, may not submit comments via the site 'submit '. "Makes me sad", or 'made me happy' submit buttons work.

  Try to remove the plist of Firefox (org.mozilla.firefox.plist).

  • http://www.MacFixIt.com/article.php?story=20060606082246983 how the .plist files become corrupted and results troubleshooting

  Go to "~/Library/Preferences" and delete the plist for Firefox (org.mozilla.firefox.plist)

  Alternatively, you can check for problems with the file localstore.rdf.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  In Mac OS X v10.7, the file $HOME/Library is a hidden folder.

  Open Finder and use one of them:

  • Go > go to folder (command-SHIFT-G) and in the type of dialogue: ~/Library
  • Open the 'Go' menu and hold down the Option key to display the library
  • http://kb2.Adobe.com/CPS/909/cpsid_90947.html Access the hidden user library files

• Premiere Pro CC 2016 does not work properly and I can't go back to the last working version?

  Everything was fine so I've upgraded to the latest version (2016.3?)

  The reading was nervous or uptight altogether and vomit constant errors.

  I use first commercially and only can afford to be in any way buggy.

  I started the next version down again (2015) which seems actually much earlier than 2016 previous version I had used successfully? 77

  Now all my projects will not open because they were modified in a newer version!

  I'm on a dv7 HP ENVY which worked without problems on all other versions of first CC for more than two years.

  I've seen others complain how buggy the last CC is which is very disappointing for a commercial tool paid that I relay on so many things.

  At this point, I would be happy to know how to install 2016.2 and not in 2015. It worked well for me on 2016.2 & I have no confidence in 2016.3

  Thank you

  Is there a way I can go back to instead of 9.0 9.1? The CC app does not give me this option?

  You go back to 9.0, then download/install the 9.1 patch:

  http://prodesigntools.com/Adobe-CC-2015-updates-links-Windows.html

• I try to install my adobe on my new mac 11 items, but I am dumb founded and need help. no disk drive on the mac air

  Help me plese

  Download from Download Photoshop Elements | 14, 13, 12, 11, 10

  Install and enter your serial number.

• Went out and got an Olympus Pen - F, and I was wondering what will be the next update ACR (I hope that my new toy will support).

  I love the photo and it produces a robust .jpg file, but I really want to go back to raw processing.

  Hi sheyingshi,

  Added support for PEN - F raw files in camera raw update today: Camera Raw Adobe Photoshop CC Installer and CS6

  Kind regards

  Claes

• Cannot adjust the brightness in windows after that some update from apple and AMD.

  Hello.

  I have 15 inch MBP mid 2015. I installed windows 10 in this regard through bootcamp, it was working fine except that I saw apple update that need to download updates, one was for the size 300 MB AMD graphics card and something small about 3 MB for the best work of the material I think.

  I installed both and since then I can't use keyboard shortcuts or even through the battery icon in the taskbar to set the brightness of the screen.

  I tried to install AppleKeyboardInstaller64 of BootCamp6.0.6133 no chance.

  I also have this AMD: http://support.amd.com/en-us/download/desktop/bootcamp is still no luck

  What should I do?

  You have an Apple keyboard driver in the device-> section Keyboard Manager?

• Help please... How can I cancel my membership music Apple and subscription?

  Help please... How can I cancel my membership music Apple and subscription?

  Click here, follow the instructions and wait until it expires. If you need to cancel immediately, Contact Apple.

  (140954)

• The Mac cannot connect to iCloud extremely disturbing and annoying pop up

  I get this pop up and I can't fix it:

  The Mac cannot connect to iCloud due to a problem with "myappleid".

  Preferences iCloud open on this issue.

  Two buttons - Later and iCloud preferences...

  If I click later, he reappeared in the minute, sometimes a second later. It is a big problem because the functionality of the command does not work. He also grabs focus, no matter what I do - I watch full-screen movies, writing in a web form, play games, out of a keynote with a client presentation. Very, very frustrating. Not the kind of behavior I've seen in Windows 2000

  If I click on iCloud preferences I receive a request to enter my Apple ID password in the Panel of the iCloud system. I have enter my password and get an error not found Keychain with the message box:

  Impossible to find a keychain to store "281711789."

  Two buttons - Cancel and reset to the default values

  If I click Cancel the previous password box returns "an unknown error has occurred." The problem goes away, but I have the original pop up within minutes.

  If I click on Reset to Defaults, I get a very scary message:

  Are you sure you want to reset your

  Keychain? This will delete all your saved

  Passwords, keys and certificates. You

  It is not possible to undo this operation.

  
  

  Two buttons - Undo and Redo

  
  

  Cancel takes me to the first problem, regular and extremely annoying and disruptive noise upwards.

  
  

  Reset is not an option! I have an ecosystem whole apple, phone, office, laptop and iPad. I need to fix my keychain but don't know what's wrong with it or how to fix it. I can open Keychain Access. I don't know if it is possible to save a set of keys and to reimport?

  Any help, especially a working solution, greatly appreciated.

  This procedure is a diagnostic test. It makes no changes to your data.

  Please triple - click anywhere in the line below on this page to select:

  ls -@BOaen L*/Keyc* | pbcopy

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

  The Terminal window does not display the output. Please do not copy from there.

  If any personal information appear in the output, anonymize before posting, but do not remove the context.

• When Apple will repair the IOS 9.2 to sync with the bluetooth in my car.

  I had my vehicle in Service several times because my Iphone 6s does not synchronize with the Bluetooth in the car.  Engineers contacted GM Apple and informed there is a problem with the sync Apple products now that Apple updated to IOS 9.2.  I'm sure that there are many users who has the same problem.  Can you tell me when I can expect a fix for the problem.

  Thank you

  9.2 IOS works very well with my Chevy.  So apart from the fact that nobody here knows if everything when Apple plans to do something... or even recognize it, why not tell us what youv'e done troubleshooting.

• Search for files and folders on XP comes up with the Error Message

  Try to search 'Files & folder' under XP Professional... Having Service Pack 3 and Windows Explorer worm 8.0.6001.18702

  Comes with error report: -.

  Windows Explorer

  Error signature

  AppName: explorer.exe

  AppVer: 6.0.2900.5512

  ModName: wispreview32.dll

  ModVer: 1.0.0.1

  Offset: 00002850

  Hi to you all...

  To search on internet re dll file... i.e. wispreview32.dll
  Referred me to CoffeeCup.Com and problem with Web Image Studio program. I had recently installed this program.
  CoffeeCup.Com now has a SOLUTION: -.
  "If it please take the attached files and copy them to C:\Program Files\CoffeeCup Software\Web Studio Image and then restart your computer. This will then fix the problem you are experiencing. »
  Attached files affected are:-
  wispreview32.dll
  wispreview64.dll
  My system is 32 bit... I did above referred with the new file wispreview32.dll and research... Files in the folders & works now fine.
  Thanks for your help.
  Kevin

• I lost my internet page/icon explore with the big E on it and now my page is weird with the chrome thing and I do not... I want back the way it was

  I'm having problems with pogo then someone told me to download the new version of Mozilla Firefox (I got the old)... big mistake. It made it worse... so I deleted it but then the titles at the top of my page are all wrong. The new pages are all wrong for me. While I went to explore and he said have chrome and I did... and now explore instead of having a big E is not the same thing as chrome and I hate it. I want my old page Explorer returns with all titles across the top and the search bar with all my sites... it's ALL MESSED UP... I don't LIKE THIS NEW PAGE... How do I get it back? All of this new * is bad for my health. Please get back to me.

  I can assume only you are referring to online Pogo games by EA Games. I'm not familiar enough with the request to comment one way or the other. I recommend that you ask this question on the Pogo help forum. I don't know that other users can offer you some advice as to what browser, plug-ins and other tweaks that you will benefit the most.

  http://help.Pogo.com/