Looking for a replacement inverter card

I need to replace the inverter on my Inspiron N7110 card, but I can't find all the information on the site of Dell re: acceptable replacement.  Can someone help me find the Council good UPS for this model?

The N7110 uses a backlit led display - this isn't inverters.  Inverters are used for the CCFL models former baclights - about anything built in the past five years or so had the CCFL displays.

Tags: Dell Laptop

Similar Questions

  • Toshiba 32BV801B looking for a replacement stand

    Hi, I have a 32 "32BV801B TV model. I am currently looking for a replacement stand but can't find one that says it fits this particular model. No one knows what the other models have the same position that will fit. Thank you

    Found that the base for model 32KV501B works also for the model 32BV801B.

  • Satellite Pro U400 - C14 - I'm looking for a replacement of the battery

    Hello
    I am looking for a replacement battery for this laptop.
    Could you please tell me if the piles of:

    Satellite U400-108, Satellite U400-10I, Satellite U400-10J,
    Satellite U400 - 10L, Satellite U400 - 10 M, Satellite U400-10N,
    Satellite U400-10O, Satellite U400-10 t, Satellite U400-112,
    Satellite U400 - 11L, Satellite U400-11 q, Satellite U400-11 t.
    Satellite U400-12R, Satellite U400-13d, Satellite U400-14 b,
    Satellite U400 - 14 M, Satellite U400 - 14 p, Satellite U400-15E,
    Satellite U400 - 17 H, Satellite U400-C01, Satellite U400-ST3301,
    Satellite U400-ST3302, Satellite U400-ST5404, Satellite U400-ST6301

    Would correspond to it?
    I am looking for a battery 7800mah or 6600mah

    Peace

    Hello

    You can use the 6000mAh Battery Pack Li - ion, 9-cell, part number: PA3537U-1BRS

    I found this on the page of Toshiba Europe Options & accessories.

    If you would google for this part number, you should find deals online.

    See you soon

  • Looking for a replacement for iPhoto

    I am currently using iPhoto 9.6.1.  I have all my photos by folders, subfolders, albums.

    I have been unable to organize the new application 'Photos' in the same way, and the program just looks very difficult to use.

    I'm running an iMac 27 inches, unit end of 2009, with OS10.11.3.  iPhoto starts to act under this new OS.  I am looking for a replacement photo program that will allow me to maintain my current organization as way above.  I also want to keep additional features such as changing.  Faces is also nice, but could happen. Suggestions would be greatly appreciated!  Thanks in advance for any help available.

    You can still do with Photos.

    Moments in Photos are new events, i.e. groups of photos sorted by date of catch.

    When the iPhoto library has been migrated first to the pictures there is a folder created in the box titled iPhoto events and all migrated iPhoto events (which are now Moments) are represented by an album in this folder.

    Use the Command + Option + S key combination to open the sidebar if it is not already open.

    NOTE: it has been reported by several users that if the albums of the event are moved in the iPhoto Library folder in the sidebar, they disappear.  It is not widespread, but several users have reported this problem.  Therefore, if you want to if ensure that you keep these event albums do not transfer out of the iPhoto events folder.

    Is there a way to simulate events in pictures.

    When new photos are imported in the library of Photos, go to the smart album last import , select all the photos and use the file menu option ➙ New Album or use the key combination command + N.  Call it what you want.  It appears just above the folder to iPhoto events where you can drag it into the events in iPhoto folder

    When you click on the folder to iPhoto events, you will get a window simulated of iPhoto events.

    Albums and smart albums can be sorted by title, by Date, with the oldest first and by Date with the most recent first.

    You can create folders in the sidebar which contains other folders and albums.

  • You are looking for a new graphics card with 1 GB of memory for Satellite Pro A10

    I am looking for a new video card with 1 GB of memory, preference but is RIMM memory ram in my office, but has a different type of memory in the description of the video cards.

    Is it important at all, the video card would work always?
    Thanks 1million
    Stephen

    I put t know exactly what you want to do, but I assume that you need this card for an upgrade.
    New bad guy! Laptop graphics cards are often fixed on the motherboard and cannot be deleted!
    In addition, you must know that the mobile graphics cards are simply different and you can't compare these chips with adapters for desktop PCs.

    Best regards

  • question of northbridge nw8440, looking for the replacement of good mobo

    Hello
    I'm my nw8440 mobile workstation (T7400, FireGL V5200, 15.4 "WUXGA) seems to have some problems of northbridge and I'm looking for the replacement of the mobo.

    I can read "Maintenance and service guide" he shares the same mobo (SPS-416397-001) with nc8430 and nx8420. But is it really the same thing? Because my nw8440 is equipped with a welded gpu FireGL V5200 those others have rather a X 1600.

    Thank you

    Mac.

    http://www.eBay.com/ITM/grade-A-HP-Compaq-NW8440-motherboard-Assembly-ATI-416397-001-242A-/151323954802?PT=motherboards&hash=item233b9c4e72

    REO

  • Looking for a replacement for opening that preserves the adjustment (in opening).

    Photos for Mac OS is not rushing to meet the needs of more than 90%, so I need a replacement of spares for Aperture.

    I have a library approaching 100 000 photos so import is a major concern. I'm looking for an app that will preserve the adjustments made within the opening. It's almost not negotiable :/

    Thank you

    Photos for Mac is the only application I know of, who keeps the aperture settings. Too bad it does not your other needs. It does not allow to customize the workspace with presets like Aperture, it does not support the presets for metadata and bath not changing, almost no support for the referenced images.

  • Satellite L300-11F - looking for the replacement of the CPU

    Hello all, I am pleased to join this forum preety. I'll start with one of my problems using my laptop, I'm looking for someone who can help me.
    I usually play WoW of this unit, but since the time my computer does not help me. The gameplay becomes slow and slower, even taking BSOD-s preety often. I'm not shure what problem I face, but the cooling system is fine (not so much dust), and I don't really know what I need to check.
    I think that a CPU upgrade should improve my game & after all the experience with this computer at least a little bit, but for this I also need some advice too.

    Where can I see what chipset is my feet bar and then see the list of caught CPU supported?

    Will I get an improvement by replacing the CPU and the thermal paste (this way I will not have the overheating problem)?

    Post edited by: aLx90tm

    Hello

    Here's a similar thread about upgrade CPU on Satellite L300, maybe what it s interesting:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=61052

  • I'm looking for the narrow inverted comma without the curve!

    original title: narrow inverted comma without the curve!

    Dear all

    Someone please show me how to type the comma inverted narrow except a right instead of a curve? I would be really grateful, as is the sign for the final accent in our language.  I put the control panel language to test the different languages, but there are none.  It would be really awesome that Microsoft could develop a "language Tonga" in its "Region and language".   I'm too help help if someone can develop.  I rang Microsoft here in Sydney and that they cannot help and they suggested to come here and post my question and I hope someone can help.

    Thank you very much

    Rosaline.

    Is the character you are looking for? He shows here really small so you might try a cut and paste in your word processing program and increase the font size so you can see what I used.  I "googled" this character by holding down the ALT key and typing the numbers on the numeric keypad 0180.

    You can also try to go to start - all programs - accessories - tools - Character Map system and look to see if you can find it here.

  • Looking for a replacement of the card of TV cable

    Can someone direct me please to the following cable source. This cable connects to the TV card and screws of connector F to the wall with the other connectors on my Touchsmart IQ815.  This small coaxial cable is about 6 inches long, has a TV connector F at one end and a very small connector at the opposite end. The part number of the cable is 5189-3019; TV tuner card part number is 492853-001 and is manufactured by AVerMedia. I looked up and down via internet and HP with no luck. My problem is the connector F is broken and welding on again, it seems almost impossible for these old eyes of 75 years. Can someone please help an old type of field HP service?

    A quickie on the part number search found it and prices.

    http://www.impactcomputers.com/5189-3019.html

    https://www.HPQ-parts.com/5189-3019

  • Looking for a replacement for my Sony Bravia model # KDL - 40V4100, how can I order one?

    I need an ideal replacement for my Sony Bravia model # KDL - 40V4100, where can I buy a property?

    Hi Wes,

    Welcome to the community of Sony!

    The part # for the TV stand set provided with the TV is A-1526-339-A. You can place an order or the furniture by clicking on the following link:

    https://servicesales.sel.Sony.com/Ecom/accessories/Web/ShoppingCart.do?operation=addToCart&Itemid=66...

    Please indicate the only accepted such solution if you find the information useful.

    Thank you for your message.

  • Looking for a replacement help cushion palmrest on Inspiron 17 5000series way!

    Hello, just got my new laptop, Inspiron 17 5000 series, and the trackpad needs to be replaced.  Dell has already sent one, that he is there any sort of instructions to replace!  So, does anyone know of a tutorial for that link?  I would really appreciate the help!  Thanks in advance, hope to get a response soon!

    It's not that simple a repair - why did you send not only the system of repair (or replacement, if it is brand new)?

    The service manual is here:

    www.Dell.com/.../manuals

    Note, however, that even if they sent the part, if something is damaged in the process of replacing, the damage will not be covered by warranty.

  • looking for a replacement code instead stage.invalidate

    Hello. I have a project

    I have an image that hold a flvplayback

    also I need an mp3 player, so I want to when I get the flv frame break and after the audio synopsis image output mp3 sound, the video also stop (cause otherwise the sound of the flv has played in another frameworks)

    I use this script:

    stage.invalidate();
    
    mene.addEventListener(Event.RENDER,exitingF);
    mene.addEventListener(Event.REMOVED_FROM_STAGE, removedF);
    
    function exitingF(e:Event):void{
    
                controller.gotoAndStop(2);
                pausePosition = sndChannel.position; 
                sndChannel.stop();
                isPlaying = false;
    }
    
    
    function removedF(e:Event):void{
                mene.stop();
                controller.gotoAndStop(1);
                sndChannel = soundClip.play(pausePosition);
                isPlaying = true;
    }
    

    Shiner is the name of the instance of FLvplayback, all function work very well

    the problem comes when I want to convert and create exe Flash projector with other third-party tools like ZInc, Swfkit

    After I compile my swf to exe and running prjector, when I click on the menu that load frame contain flvplayback, watch the video, the healthy break and everything is ok

    but when I want to go to another frame, and then click the other menus, my projector having replied to the questionnaire and no closed shot!


    I check, step by step and remove this framework code to find what cause this code and I found, its: stage.invalidate ();

    I don't know why but it seems its none compatible or confilict with these thirdparty app

    can someone help me find a replacement for stage.invalidate (); and help me run my projector?

    Thank you

    I've been wrong onstage.invalidate();

    I have thoghth it used for removedF function, but it seems he used to Event.RENDER

    so I just remove all script associated with exitingF and add:

                controller.gotoAndStop(2);
                pausePosition = sndChannel.position;
                sndChannel.stop();
                isPlaying = false;

    for the goto frame playback flv button.

    solved my problem and I think I don't need to use Stage.invalidate (); Event.Render or more

    lucky, Dear Kglad give me a real simple way to run the script on a specific image here: http://forums.adobe.com/message/5148931#5148931 , so I need never really stage.invalidate.

    Thank you sinious for advise and answer too

  • Looking for a replacement of a copper PXI MXI - 4 lost PCI cable, a 1:1 cable RS232 work?

    Hi all

    is anyone able to help me out of this misery?

    Thank you very much!
    Jürgen

    Hello Juergen,

    Unfortunately you cannot substitute an RS-232 cable instead of the standard MXI-4 cable.  While both use a DB-9 connector, the pinout of each cable is different.  Even if you were to manually change a standard serial cable, that you could have interference problems of noise due to the higher frequency MXI-4 compared to the RS-232 signaling.

  • Looking to update the graphics card Inspiron 530 s

    Hi, I was looking for to upgrade graphics card my Inspiron 530 of the s to something that would be consistent and give better performance. I use it mainly for games and play games such as minecraft and team fortress 2. Unfortunately, my pace is not very good. Also I said that my case is a slim that I would need a card low profile. Fake card can be found here: http://www.dell.com/us/dfh/p/inspiron-530s/pd any response would be really appreciated, thanks! Also, feel free to ask more questions about the specifications of the computers.

    You must use a profile card down so he can adapt.  Also, you are limited by your power 250 watt until you can get.  The best card you will get there and others have used is the HD 6670 HERE. See discussion below on this particular card.  One step down would be the HD 6570.   The HD 6670 and HD 6570 have identical power drinks so there is not a lot of reasons to get the HD 6570 unless you want to save money.   Really useless much but to play the games you mentioned, even a cheap HD 5450 or HD 6450 works very well HERE and be more than enough.  You must use graphics just to edge.

    A new 300 watt PSU can be purchased for your system HERE if you are more comfortable with it.

    Pros: Requires very little energy to my 250w PSU was enough to make it work.
    I play most games with setting max now

    Cons: A bit noisy, but it's not so bad.

    Other thoughts: I have a Dell inspiron 530 s (slim model) which is an old system with only 250w power supply I was afraid that he might not run but has no problems so far. I recommend this card to people with slim cases with low power.

Maybe you are looking for