Satellite Pro U400 - C14 - I'm looking for a replacement of the battery

Similar Questions

• Satellite Pro U400 - no sound after downgrading for Win XP

  Hello

  I hope someone can help!

  Have just downgraded from Vista to XP pro U400, downloaded all the drivers I could get on the Toshiba site but I still have PCI Device and unknown device drivers are not installed for.

  Think it must have something to do with the sound when I tried to load sound divers, he came up with "cannot find media device" If don't have her no more, anyway don't know what to do next.

  Thank you for the charges

  Hello

  This theme has been discussed here many times.
  It s a general problem with Windows XP!
  If you n t install the patches MS as KB888111, KB835221 and then you would not get the sound.

  You must install these cites patched before install you the audio driver!

  If the driver has been installed you must remove it first before the patches are installed.

  PS: This MS patches are part of the SP3 too!

• Satellite Pro A40: Cannot read music - looking for an audio controller

  Hello

  I have a satellite pro A40, my DVD rom drive no longer works and I get a message on the search for material for a multimedia audio controller!

  Cannot play music or anything more.

  Can I download these drivers safely?
  Don't want cluttering up computer with random internet downloads.

  If anyone can help me I would be eternally grateful

  Hi satproa40,

  You can download all the drivers for your satellite safely of: [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  the "multimedia audio controller" means that the audio driver,
  If already installed it can help remove this item in Device Manager and let it reinstall System.

  same procedure with the dvd - rom, if this wont work try swapping the drive...

• Looking for a replacement of the card of TV cable

  Can someone direct me please to the following cable source. This cable connects to the TV card and screws of connector F to the wall with the other connectors on my Touchsmart IQ815.  This small coaxial cable is about 6 inches long, has a TV connector F at one end and a very small connector at the opposite end. The part number of the cable is 5189-3019; TV tuner card part number is 492853-001 and is manufactured by AVerMedia. I looked up and down via internet and HP with no luck. My problem is the connector F is broken and welding on again, it seems almost impossible for these old eyes of 75 years. Can someone please help an old type of field HP service?

  A quickie on the part number search found it and prices.

  http://www.impactcomputers.com/5189-3019.html

  https://www.HPQ-parts.com/5189-3019

• I need to replace the battery and AC adapter of the Satellite Pro U400-160

  I have a Satellite Pro U400-160.

  I need to replace the battery and the charger of my Toshiba, but I am wary about compatibility issues.

  Any battery for Satellite Pro U400 is suitable for mine?
  As I can't find which batteries are specifically suitable for my computer.

  (For example: is this a: http://www.amazon.es/Bater%C3%ADa-Toshiba-Satellite-U400-11V-7800mAh/dp/B0051A9Y88/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1366885340&sr=1-2-catcorr&keywords=satellite+pro+u400?)

  Is there a quick way to check if a battery / charger are compatible?

  Each battery and adapter you get from Toshiba has specific part number. All you have to do is use this same part number and order. You should be able to find on the internet.
  You can also get compatible parts you are ordering by the Toshiba authorized service provider in your country.

  By the way: all U400 models have the same construction and the similar specifications then all the batteries specified for U400 can be used on your U400-160.

• Satellite Pro P70 - Has: 2nd invisible HARD drive - how to initialize the 2nd HARD drive

  I have a P70 - A. Satellite Pro
  'Primary' hard disk failed, and has been replaced by the service centre.

  Now, only the main hard drive is shown and the Service Center said that I had to 'initialize' the second hard drive to make it visible. They assure me that the hard drive is there, just hidden.

  How can I make visible?
  How do I initialize it?

  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• Are 64-bit OS drivers available for Satellite Pro U400 PSU45E

  I am looking for a Pro U400 PSU45E-00D005EN, which comes with 3 GB of RAM.
  The specs say it can take up to 8 GB, which is something that I would like to upgrade to.

  I run a large number of virtual machines on my machine for purposes of development and support.

  Anyone know if Toshiba allow 64-bit drivers the U400 that I need a 64-bit to support all Windows operating system that is more than 3.2 Gb of RAM.
  If not, is there a repository that anyone uses?

  Thanks in advance!

  Hello

  I think the Vista 64 bit drivers will be available by the Satellite Pro U400.
  Vista OS 64-bit drivers are available for another series of Toshiba and I don t see why the pilots shouldn't t be available satellite Pro U400 too many serious reasons.

  But the satellite Pro U400 seems to be very new series and I think it will take some time until that pilots will be released.

  Welcome them

• Upgrade to Windows 7 is available for Satellite Pro U400?

  Upgrade Windows 7 offer is available for this laptop?
  Satellite Pro U400

  Post edited by: Renad26

  Hello

  You can find the Win 7 upgrade capable notebooks here:
  + http://eu.computers.toshiba-europe.com/-> Windows 7 Upgrade-> Toshiba laptops that are eligible for the upgrade to Windows 7 +.

  The Satellite Pro U400 PSU45E is Win 7 eligible.

  Welcome them

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye

• Can I get the battery 9-cell for Satellite Pro U400 - 13G?

  Hey

  Can someone tell me if it is possible to get a battery 9 cells for Satellite Pro U400 - 13G.
  And if it is then what is the part number?

  Best regards Anders

  You know the Web from Toshiba website Options & accessories?

  See this page:
  http://EU.computers.Toshiba-Europe.com-> peripheral services & -> PS Options & accessories

  There you will find all the compatible options.

  AFAIK this battery could be compatible with the Satellite Pro U400 series:
  * Battery Pack (Li-ion, 9 cell, 6000mAh) PA3537U-1BRS *.

  Good bye

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Question on the infrared driver for Satellite Pro U400 - 12 p

  I downloaded the infrared driver for Satellite Pro U400 - 12 p
  When I run the Setup, I get an error that says "the installation of the windows package file is not complete" or something like that.

  Anyway, he said that the Setup file is in ruins. Tried downloading it several times.

  Hope I have posted this question in the right forum.
  Thanks for help.

  When you download the driver to extract it to a folder created on your desktop. From there start the setup.exe file. It should work.
  Have you done the same?

• Re: Need driver XP SATA/RAID for Satellite Pro U400

  Hi all

  I've searched and searched, but I can't for the life of me find suitable driver to install XP on my machine. It came pre-installed with Vista which is useless to me because of the instability, bugs, just be a poor OS. I got the new laptop for a week now and have not been able to use again, so it would really appreciate someone pointing me in the direction of SATA/RAID drivers for XP.

  Thank you!
  E.g.

  Hello

  The Satellite Pro U400 needs a SATA driver, and you can find it in the Intel Matrix Storage Manager package.

  This storage manager can be downloaded from the European driver Toshiba page (see the series of portable different) or you can also download it from the Intel site.

  The SATA driver must be installed during XP Setup process. You must press the F6 key to include a 3rd party (SATA driver) from the external USB floppy drive.

  If you don t have a floppy drive, then you could create a clean XP CD with SATA driver. NLite freeware software can be useful for these jobs

  My advice is; Google a bit for nLite for more details.

  Good bye

• Need driver for Satellite Pro U400 PSU413 wireless

  Hello

  I have a satellite Pro U400, PSU413. He recently a blue screen is dead and has since had to be formatted and reinstalled.

  I have a problem with the installation of the wireless drivers.
  Those listed in the section downloads for this model does not work and the user of the laptop will be lost without wire.

  The file to download from the toshiba site is http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fwlesslan-20080530073920.zip

  I have downloaded/extract and run installation, I also tried to install the driver manually, but windows is not interested.

  Any ideas?

  Thank you

  Thanks a lot for the comments

• Satellite Pro U400-130 - Conexant and 'Stereo Mix' in question

  Hello

  I have a Toshiba Satellite Pro U400-130 (downgraded from Vista to XP) with the Conexant High Definition SmartAudio 221 "audio card" installed.

  Although this seems to support HD audio, I can't find any option to use or activate the "Stereo Mix" option in the Windows console. I tried a few settings to registry and some different drivers, but so far, the option remained absent.

  I know this forum and other comments on the net that Conexant audio cards do not support the stereo mix, but I was wondering if someone could confirm that this is certainly the case for SmartAudio 221?

  Similarly, anyone know of another method to record the sound 'as heard' on the computer? So Far, the options appear to be a) buy an external sound card, or b) connect the plug headphone mini-jack on the mic with a cable jack.

  After using a p3500 old Portege of 8 quite happy with this function (actually pretty basic), it is very disappointing to find that this card cannot support it.

  See you soon,.
  Select this option.

  > I can't find any option to use or activate the "Stereo Mix" option in the Windows mixer
  > I know this forum and other reviews on the net that the Conexant sound cards may not support stereo > Mix, but I was wondering if anyone could confirm this is certainly the case for SmartAudio 221?

  I can confirm this because I have a laptop (NOT from Toshiba one) that was equipped with the Conexant audio chip and the other laptop (Toshiba Satellite a series has) that supports the Realtek audio chip.

  The machine with Realtek audio chip contains stereo mix and the other non-Toshiba unit that supports the audio chip Conexant does not support the stereo mix

  As far as I know the update of the driver won't help you because it looks like a hardware limitation of chip Conexant!

  However, thanks for the info about the Virtual Audio Cable tool.
  I think I'll try it next time