Looking for advice for a new user to vmware
Hi all
Looking for a help and advice for a rookie to vmware
We have just purchsed 3 x DL380 G8 each with 8 x 1 TB HARD drive no storage shared, and we are currently approved for most part more packs 2 x.
What I wanted to do was to reproduce some VM so if one breaks down then we can either manually or automatically start another on another host. I'd like to reproduce our exchange 2010 essentially server but that is currently on the phyiscal material and I would need to first do a P2V conversion. I also read a few negative articles on running exchange on a virtual computer.
I had read a little and looks like FT is outside the quetsion because of having not shared storage in place and there is also the limitation of 1vcpu. So I was wondering where to start really. For any tips, pointers, etc. will be very much appreciated.
Thanks in advance for any help.
Welcome to the communities...
As you use Essentials Plus, you can order vSphere Storage Appliance you can use a shared storage. Make sure that the hardware is compatiable with vSA (http://blogs.vmware.com/vsphere/2012/12/major-hcl-changes-for-the-vsphere-storage-appliance-vsa.html)
What I wanted to do was to reproduce some VM so if one breaks down then we can either manually or automatically start another on another host
vSphere HA done for you if you are eligible.
Tags: VMware
Similar Questions
-
Satellite M30X-134 - I'm looking for a new motherboard
Hello
I m looking for a new motherboard for my satellite M30X 134! I was offered one with K000019680 number with the advice that this one is for all laptop M30X Toshiba. I m a bit irritated, because my thoshiba operator told me, that I need one with the number K000019210. Could someone tell me, if the K000019680 also goes very well with my laptop?
Best regards
Armin
Hello
Looks like you can use both of them, it is perhaps better to use K000019210. on this way, you'll be on the safe side.
-
Restoration of an IPad 2 for a new user
I want to give my IPad2 my husband without my data. I have new IPad that includes the data I want my old. How to restore the old to its original settings? I'm afraid of losing my songs, photos, etc. from my new IPad Pro.
Hello
Now access iCloud backup
Then turn off find my ipad, and then restore it back to factory settings ipad.
This removes you ipad apple ID is now ready for the new user.
Make sure that your husband has its own apple ID.
See you soon
Brian
-
You are looking for a new graphics card with 1 GB of memory for Satellite Pro A10
I am looking for a new video card with 1 GB of memory, preference but is RIMM memory ram in my office, but has a different type of memory in the description of the video cards.
Is it important at all, the video card would work always?
Thanks 1million
StephenI put t know exactly what you want to do, but I assume that you need this card for an upgrade.
New bad guy! Laptop graphics cards are often fixed on the motherboard and cannot be deleted!
In addition, you must know that the mobile graphics cards are simply different and you can't compare these chips with adapters for desktop PCs.Best regards
-
Satellite A100-204: I'm looking for a new battery
I'm looking for a new battery for my laptop, but I have no idea where to find... And yes I already searched on google and most of the time that it brings me to canada, but I don't know battery that fits mine.
I ordered once, but it didn't fit. They said that I should ask toshiba.
The one that accompanies it is PA3400U-1BAS.
I would like a battery that of at least 6 hours, or more...I hope someone can help me.
thnx in advance
JKSimply visit Toshiba Europe site and visit the Options & accessories.
http://EU.computers.Toshiba-Europe.com/-> Products
There you choose model laptop, and you will get the site with compatible parts.
There are all batteries compatible and supported listed. -
I have a T1i and am looking for a new lens for an upcoming trip to Italy. I am currently using a 28-135 as my lens every day and wonder if it is better to use as my daily lens out there to be able to capture the sights. I'll be bringing in a 50 mm fixed, but do not want to be bogged down with too many Lenes
The EF 28-135mm f/3.5-5.6 IS USM is a great lens. I'd be willing to take just about anywhere.
You said that you have a 50mm f1.8, I think. I would take what you have and add the EF-S 10-22mm f/3.5-4.5 USM or the new lens EF-S 10-18mm f/4.5-5.6 IS STM.
But the EF 28-135mm f/3.5-5.6 IS USM and the 50mm f1.8 will cover "more" than what you need.
-
When I try to load anything my computer it says secure file type Wizard get software suggestions. You do not have a program installed that can open your file, or you may be looking for a new
Hello
· What file you load?
· If it is saved on the computer? If so, what is the location of the file?
· What is the service pack installed on the computer?
· Do you remember all the recent changes on the computer before the show?
· You have security software installed?
1. check the file association is correct, you can see below the link to the same: how to change or choose the program that starts when you double-click a file in Windows XP: http://support.microsoft.com/kb/307859
2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm
With regard to:
Samhrutha G S - Microsoft technical support.
-
How can I migrate data UAC 8 widows for a new user account.
Hi thanks for your help.
I created a new user account in my pc Windows 8 and I want to migrate my data, files and images for the new user account. Anyone know how to do this in Windows 8?
Thank you
Hi Wendol,
Thank you for choosing Windows 8 and we are happy to help you.
I understand from the description of the issue you want to transfer data from one account to another account in Windows 8.
I suggest you to move your public folder data, so that all users on the computer will be able to access. Go through the article to learn more about public folders and how to enable this feature.
Public folders: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-8/public-folders-FAQ
It will be useful. For other questions related Windows feel free to get back to us. We will be happy to help you.
-
Not able to access sqlplus command-line linux for the new user added
Hi all
We have a strange problem with a new user of linux Redhat , trying to to connect to Oracle 10 g from the command line and would like any suggestions you have.
-other users are able to connect via sqlplus fine to their respective Oracle accounts, both for the new user account.
-I know the user and the password works because we can connect through Oracle SQL Developer from a terminal Windows.
-----
The monitoring of symptoms:
Since terminal linux+:
[user@server]$ sqlplus
Error Initializing SQL 6 * more
SP1 file < lang > .msb not found message
SP2-0750: you may need to set ORACLE_HOME in your Oracle software directory
[user@server]$ echo $ORACLE_HOME
/ opt/oracle/10 g
[user@server]$ echo $ORACLE_SID
~ also define as in other users without db connection problems
[user@server]$ pico * .bash_profile]
~ the value as in other users without db connection problems
[user@server]$ testconnection.pl perl
Series of tests in connection...
ORA_HOME: "/ opt/oracle / 10g.
AMERICAN
DBI connect('local.domain.name','db_username',...) failed: ERROR OCIEnvNlsCreate (check ORACLE_HOME and NLS parameters etc.) to the line /www/testconnection.pl 21
has failed: ERROR OCIEnvNlsCreate (check the ORACLE_HOME and NLS parameters etc).
[user@server]$ pico testconnection.pl
! / usr/bin/perl
Use DBI;
$this_var [0] = "dbi:Oracle:local.domain.name";
$this_var [1] = 'db_username ';
$this_var [2] = 'db_password ';
print 'Test Run of connection...\n\n';
print ' ORA_HOME: '$ENV {ORACLE_HOME}' \n ";
print ' NLS_LANG: '$ENV {NLS_LANG}' \n ";
Print "ORA_NLS: '$ENV {ORA_NLS}' \n ';"
Print "\n\n";
#connect DB
$dbh = DBI-> connect ($this_var [0], $this_var [1] $this_var [2]);
{if ($DBH)}
Print "OK \n";
$dbh-> disconnect;
}
else {}
Print "failed: $DBI: errstr\n";
}
Thanks for your help!>
[user@server]$ ls - lt /opt/oracle/10g/sqlplus/mesg/sp*.msb
-rw - r - 1 oracle oinstall 31744 Sep 2005 1 /opt/oracle/10g/sqlplus/mesg/sp2us.msb
-rw - r - 1 oracle oinstall 11776 Sep 2005 1 /opt/oracle/10g/sqlplus/mesg/sp1us.msb
>It seems that if you have a permissions problem. If your username is not a member of the oinstall group, he or she has no access to the necessary sql * more files. I recommend you read MOS 420083.1 Note for a more in-depth discussion to set the file permissions on the Oracle home.
-
How can change the bookmarks system wide for each new user?
I wish that every new user who creates a count in a Debian linux system to achieve a specific set of bookmarks. I can't find where to put my custom bookmarks.html file to do this.
Create a folder/defaults/profile in the Firefox installation folder and place a bookmarks.html file in this folder.
This is the same folder of models for the new profiles that used in previous versions of Firefox, but all files that were there, then are now in archive omni.jar and the profiles folder in are no longer present. -
Looking for a new charger for a Satellite Pro C850 - 10V
My charger for my laptop stopped to load the computer, and I'll try to find a new charger, but can't seem to find to this laptop.
A charger for another version of the Satellite Pro would work as well?
Each charger has own part number. This part number, you can find on the label of the charger. Not looking for charger for model C850 - 10V but click on part number to order the right one.
-
Original title: update replication
Hey there. I recently did a factory reset and now I can't seem to install service pack 1... It says its installed but when I search for new upates I get the same so far again and again and again. any ideas?
I don't think it is a good update of the service pack, a because it was only 1.9 MB, but every once its installed, I look for new updates and get the same thing. its driving me crazy. I can't keep getting my system at a speed without this service pack
Hi Jools101,
You can try the following steps and check if it helps:
Method 1:
You can check the update history if the Service pack is installed or not. If impossible to install, then checkfor codes error.
a. click Start, all programsand then click Windows Update or Microsoft Update.
b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.
c. double-click the update has failed to check the error codes.
For more information, see the article:
See the Windows updates are installed
Method 2:
You can check the article to reset the Windows Update components and check if it helps.
How to reset the Windows Update components?
Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information, you can view the article:
Also see the article:
Windows Update or Microsoft Update repeatedly offers the same update
Method 3:
You may also refer to article and check if it helps:
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
For more information, see the article:
-
Retrieve the user profile for a new user after user profile Service failed and could not be loaded
I use Windows Vista Home Premium operating system.
I wasn't able to log onto my user; I searched online for an answer and advise him to create another user - I had 'Admin' status with the original user.
I followed the following instructions:
http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=19&docid=39CC797DE6882CB6E040A68F5B285C29&l=en&s=DHS
According to these instructions, I've logged on the account current and open a session on the new user account. However, all my documents, pictures, music, files, office, Microsoft Office Suite, Microsoft Outlook Email, etc. have disappeared!
I not created it of new files or documents under the new user in the fear that it crushes everything and help restore everything back to its original state.
When I performed a search of the system / "C: drive", none of the documents or files have been found.
How to restore these things, especially my photos? Or, how to restore the original user?
Any help you give me for this problem will be greatly appreciated.
original message: error message: "could not load user profile and user profile Service failed". Made a function to create a new user, but all my files, pictures, music, desktop icons and other stuff are GONE AND I can't FIND them ANYWHERE!
Hello
Your data and files are still there in the C:\Users\Your user name where C: is the drive where
user profiles are stored.You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
Earth) has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with
a temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
User profile folders that are created as UserName.MachineName for a new user
I created a new user local and rebooted my computer. I see that the user folder is created as UserName.MachineName. The same value is located in the ProfileImagePath under ProfileList for this user SID under HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList.
Steps I took to solve this problem which has failed:1 remove the user folder and restarted to log in again.2 remove the user and recreated and restarted.3. to change the ProfileImagePath for this user in the registry and rebooted.Things I want to know:1. why the user folders are created with this method of naming.2. How can I solve this problem?Receive any response on this thread.Thank you.Hi Vijay,
Follow these steps and check:
- Open area users and local groups of the Management Console as described above.
- Double-click the account, and go to the profile tab.
- Enter the folder path and home of profile (local path) as "C:\Users\USERNAME\".
- Copy the contents of the "C:\Users\USERNAME.COMPUTERNAME\" and delete "C:\Users\USERNAME\".
- Recreate the 'C:\Users\USERNAME\' folder, then paste is the content of the 'C:\Users\USERNAME.COMPUTERNAME\ '.
- Delete "C:\Users\USERNAME.COMPUTERNAME\".
- Restart and pray.
-
Licensing procedure to create the table for the new user
Hi all
Thank youI have created one new User, and give GRANT CREATE SESSION TO USER. But after that from which grant, i would be able to create table and other object, specially for table.
BrijThe role of resource works in your case, as it consist from under privs
grant resources to
; GRANTEE PRIV NAME -------------------------- -------------------------- RESOURCE | CREATE CLUSTER | CREATE INDEXTYPE | CREATE OPERATOR | CREATE PROCEDURE | CREATE SEQUENCE | CREATE TABLE | CREATE TRIGGER | CREATE TYPE
Please close the message if you feel that you have the answer and to clean the Oracle forum.
https://forums.Oracle.com/forums/Ann.jspa?annID=885
Maybe you are looking for
-
Apple Mail window does not appear when I click the icon in the Dock
When you use Apple Mail, if I reduce the window, she collapses in the Mail dock icon. When I single click on the Mail dock icon, nothing happens. In Safari and Photo, reopen their windows. After clicking on the dock icon, Mail is the application to
-
Please confirm Inspiron Integrated Network interface dead
Last night we had a lightning strike near, I grilled my Inspiron 660 built-in adapter Mbps ethernet 10/100/1000. I just need a confirmation that I am wrong and that the only option is to buy a new adapter. Evidence: 1. There is no link light 2. the
-
Hey people, I was puzzled on this the last bit of time and can't seem to find a solution. (The closest thing I could find is here: http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/Webapp-not-starting-on-device-VM... but there does
-
Is there a way to copy only the column "date modified" in a folder and paste it into Excel?
I want to create a graph about what time certain things happen. It won't let me turn off the 'name' column and because the files are. WAV is - this does not copy to Excel.
-
series PIX command authorization
Hi all can someone tell me please the use of GBA pix command authorization. I understand the use of a shell command authorization. I'm sorry if the question is too dumb. I am completely new to this sector. Thanks in advance. concerning Kirti.