looking for data security technology

Similar Questions

• Re: Tecra M11 - 11J - I'm looking for Active Management Technology driver

  Looking for a driver for Intel active management technology (AMT), on my Tecra M11 - 11J

  Although there is a category for it on the downloads page, even when the search for all operating systems no result is found!

  Thanks in advance,

  Nathan

  To do this, you should look on the site of intel:

  http://software.Intel.com/en-us/articles/Intel-active-management-technology-Intel-AMT-software-development-kit-SDK-start-here-Guide/

• You are looking for a secure VPN

  Thank you to those who share their experiences with others.

  I need to use a VPN for a short period of time, while I am in a country where I can't do my banking online due to the restrictions in this country.

  I use my MacBook Pro (OS X EL Capitan)

  Can someone like me:

  1 is there a VPN secure to install on MacBook pro?

  2 - What is the instruction to stop the installed VPN whenever I don't need?

  Thanks in advance.

  I recommend HotSpot Shield. It is easy to use and not too expensive. Can be quickly enabled or disabled. I also recommend (and use, myself) SaturnVPN. It is configured in the preferences of your network and is also easily enabled or disabled. SaturnVPN requires no special software while HotSpot Shield provides a utility for its use. Finally, have private Internet access. I used all three, but my preference has been SaturnVPN because it requires no separate command utility. Payment for each of the three is available in monthly, quarterly and annual subscription fees. All have ability to iOS, as well.

• When I try to open a file attachment in e-mail or any program, it is looking for data of similar detail and hundreds of open tabs Firefox!

  When you try to open an attachment in an e-mail message, the pc tries to find data in Firefox using the accessory 'name' instead, so open several tabs, none of whom is my attachment.
  We also have our own systems that are not allowing me to open attachments, even once the search Firefox data rather than the attachments that are already fixed.
  If I don't comment LIBRA file, this then allows me to open files in a roundabout method.
  Would anyone please help with this, I imagine, there is channel error, but I'm just clutch at straws here!
  Thank you for reading this pleeeeeeeeeeeeeeee!

  See this support article - https://support.mozilla.org/en-US/kb/firefox-repeatedly-opens-empty-tabs-or-windows

• looking for a safe anti program _ internet

  you are looking for a secure internet _ program protect my girls

  Hello

  See this and the 'related links '.

  How to install and use Parental controls in Vista
  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  and these:

  Setting up Windows Vista's Parental control
  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Set up Parental controls
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  ---------------------------------------------

  Reviews of PC - Mag - Parental control and monitoring
  http://www.PCMag.com/Category2/0, 2806,1639158,00.asp How to buy Parental control software
  http://www.PCMag.com/Article2/0, 2817,2346997,00.asp

  See also sponsored links and downloads here
  http://www.PCWorld.com/search?Qt=parental+controls

  Google search
  http://www.google.com/search?hl=en&source=HP&q=Parental+Control+Software&aq=f&OQ=&aqi=

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Looking for guidelines SNR for upper 802.11n (150 Mbps and 300Mbps) of data rates

  Is anyone aware of any directive of Cisco and/or observations on the ground for 20 Mhz (single channel) 150Mbps 802.11n 40 Mhz (dual channel) 300Mbps deployments and deployments?  If they vary also freq band. (2.4 or 5.0 - does not intend to make 40 Mhz to 2.4 Ghz).

  Also, if anyone is aware of any 802.11n design guidelines / planning guides (preferably Cisco) with some rough points square guidelines for generic, Interior carpet environment office (similar to the PA 1 through 10,000 feet square for the data base/light and 1 PA by 3,000 feet square for VoWLAN), but for the 802.11n which would be appreciated.

  Is enough to remind me about the need to conduct a site survey - and I realize that these figures will stretch based on the environment - looking for instructions and values of the signal, if published.

  In addition, it is understood that different customers may have different sensitivity - no need to go either

  Especially try to find some guidelines rough values published for planning purposes.

  Thank you

  John

  Not sure if you are still looking, but it is the reference in the CUWSS quick reference Guide.

  Conditions of accreditations RSSI/SNR
  Data rate 20\40 MHz 2.4 GHz Min RSSI 2.4 GHz Min SNR 5 GHz Min RSSI 5 GHz Min SNR 14.4\30 -82 11 -79 14 28.9\60 -79 14 -76 17 43.3\90 -77 16 -74 19 57.8\120 -74 19 -71 22 86.7\180 -70 23 -67 26 115.6\240 -66 27 -63 30 130\270 -65 28 -62 31 144.4\300 -64 29 -61 32

• I am looking for ENE PCI Secure Digital / MMC Card Reader Controller for Windows 7 64-bit.

  Hello

  I am looking for ENE PCI Secure Digital / MMC Card Reader Controller for Windows 7 64-bit.

  Any ideas, please?

  Hello

  I did a system image (drive C :) and a rescue of dvd of Windows 7) Cool, it uses a Volume Snapshot.

  Then, I installed the Vista 64 bit drivers successfully.

  The drivers are:
  -ENE PCI Memory Stick Card Reader Controller

  -Card Secure Digital ENE PCI / MMC Card Reader Controller

  -AuthenTec Inc. AES2501A (fingerprint)

  -Trust Webcam 15007

  Unfortunaly, the imprint does not work. I thnik my fingerprint is not compatible with the new Windows Biometric Framework (http://windowsteamblog.com/blogs/windows7/archive/2009/01/08/windows-7-puts-it-s-finger-on-enhanced-biometric-support.aspx)

  Thank you all, bye.

• How to wait for HTML when ADF Application sends a 'work' screen while Looking Up data space reserved

  Hello world

  I am trying to write test scripts in Openscript for an ADF application that uses Business Intelligence and support partial-Page rendering.  While it generates data, it sends HTML says his 'work', and then re - makes the area after the SQL call to the database ends.  The script passes after receiving the 'work' page and errors because it cannot find the variables that should have been created.

  How can I make the script wait for the actual page?  I looked through the documentation and looked online but I couldn't find anything relevant (or do not know what I'm looking for).

  Any help appreciated.

  Thank you

  Roy

  OK - problem solved.

  OBIEE sends the page indicating that it is looking up until the actual data returned.  There is an option on the Weblogic OBIEE server in the {WEBLOGIC_HOME}/instances/bi_instance/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml file that can be defined (for test/debugging) to delay sending the screen holder place 'research'.}

  This should be added to the file XML between the tags.

  600

  True

  The value indicates how many seconds the OBIEE server waits until it sends to the screen "search.

  I hope that this information will prevent hair pulling episodes by others.

  Roy

• Looking for model/data format to import survey data in the survey on demand in the apex 4.2.5

  Hello

  Looking for a model/data format to import survey data in the survey on demand in the apex 4.2.5.

  Thank you

  hayatms wrote:

  Where I can get this CSV format, so I have to add in the file accordingly. Thank you

  Click on the button create poll on the surveys page, then select the option to create a survey from a text file. An example of the required format is displayed. It is not a CSV format.

• I'm looking for Javascript that can be part of a checkbox or a text box, or probably both who will open a document secured by a password?

  I'm looking for JavaScript that can be part of a checkbox or a text box, or probably both who will open a document secured (using a password entered correctly)?

  Is this possible?

  I think it would be easier to access as needed without having to directly access the Edit menu items.

  Also then reattach when the editing is complete.

  Thanks for your thoughts in advance!

  You can open a file by using a script, but you cannot specify the password file - open for her, if that's what you mean.

  In addition, you can apply a security policy to a file if it's going to be used in the drive, in Acrobat.

• Just looking for best way to do... 2 data joined tables

  looking for advice this.

  using oracle 11 g.

  I have data im going to use in a view to update TABLE1 monthly.im going to see all these data via php in a web page.

  I would like to add a few modifiable of table2 values who will join table1.

  -drop the table1 table:

  create table table1)

  number of value1,

  Number of value2,

  number of value3,

  Number of VALUE4,

  number of Value5

  );

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (1119,4,54,772,643);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (22,345,55,278,446);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (314,193,75,542,676);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (13,396,59,232,670);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (41,2003,505,232,7096);

  -select * from table1

  create the table2 table)

  VCLE NUMBER,

  NUMBER OF VERSION_NUM,

  COMMENTAIRES1 VARCHAR2 (50).

  comments2 varchar2 (50)

  );

  -select * from table2

  Vcle in table2 is a concatenation of value1, value2, value3 on table1.

  So the end result is on the web page of all the values in table 1, unmodifiable, 2 reviews in table2 fields that can be changed. A user can change these fields, then they will save in table2 with the key of concatenation. the reason why I want to do like this, with a second table is because whenever a user changes these fields I want to insert again to occur in this table, not an update, which will add a trigger, I have a new version number. This sounds like a mistake to do it this way?

  The strategy of the concatenation is a mistake.

  Concatenation requires strings, then you would be conversion 3 numbers to strings to concatenate, then convert it to a number stored in table2.

  If I insert = 11-v1, v2 = 11, v3 = 11 then insert v1 = 1, v2 = 11, v3 = 111.  I generates the same Vcle and either corrupt your data or make it impossible to tell what row in table1 = 111111 Vcle should concern.

  A substitution used as primary key in table 1 key is a way to fix this design.

• I'm looking for a tutorial I found a few days back on the display of tabular data in Flex

  Hello

  I picked up Flex programming a few days ago and I learned about the data grids and tabular display of data. I came across a tutorial with sample code that shows how 1. display information in a tabular format.

  2. how to read this information in an xml

  3. how to display more information if an element in the form of table are selected.

  the tutorial uses the players and their games favourite elements of tabular data, and once an item is selected, he showed the news editor of the game and detailed text information. I'm looking for this particular tutorial again and not able to find through google search

  Could you please help me find this article once again?

  Kind regards
  RAM

  Found.

  http://www.switchonthecode.com/tutorials/Flex-fun-Advanced-DataGrid-topics

• I am looking for a download secure portal MyEpsom view on my Epsom printer ink levels

  I am looking for a download "MyEpsom Portal" for my Mac so that I can watch on my Epson printer ink levels. It seems that for Windows which I did not. Can anyone help?

  Lynne

  Have you checked the system preferences > printers and Scanners > print from there you see a button Options and supplies

  Like this.

  

  Have you checked the Epson website for drivers/software for Mac OS X. for your printer scanner model.

• Looking for an explanation of the flow of data around a structure of event with data going in and coming out of it

  I am trying to add a case to the structure of the event shown below.  Other cases in the event structure close the front afterwards.  I wish my case in abeyance the façade.  Is it possible to do it with this configuration?

  Because the invoke method is in front of the structure of the event what it means that the Panel should be open whenever the structure of the event begins to look for an event?

  The structure of the event by using the code below, after I pressed the button calibrate stop listening to additional events.  I moved the functions close FP within the structure of the event, so other events he would call here but this does not seem to make a difference.

  Thanks for any help.

  Dave

  

  An event structure only waiting for an event.  To continue waiting for the events after the first occurs, you must put the event structure within a while loop.  Then you can put your knot FP close outside while loop and thread the stop of the while loop condition for the loop stops for the case that you want to close your façade.

• Looking for powershell script to view the path data store policy

  Basically, I'm looking for the equivalent of powershell with esxcfg-mpath-l.

  Any help would be appreciated.

  Try the attached script.