Lost my button 'stop '.

Similar Questions

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• Satellite S50T-A - button / stop does not

  Hello

  I am running Windows 8.1. After that most recent Windows Update and then restarted, the computer froze to the Toshiba start screen. Fan went into overdrive and so I pushed the power button / stop.

  Now, seems dead - button / stop, black screen, no its HARD drive is unresponsive. Only signs of life are power and battery LED on the front of the computer. Press and hold the power button for more than 10 seconds do nothing.

  Any ideas?

  Hello

  Stop switch force (hole) is available at the bottom of the laptop.
  In the case of PC freezes, do not start or a power failure, which can be fixed by pressing the power button for 10 seconds (force shutdown) and now, use the stop switch to force

  I found this info in this document of FAQ from Toshiba
  [The stop switch of strength (hole) for models with one main battery fixed | http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm]

  A short feedback would be greatly appreciated.

• Whence the "reloading" and buttons "stop" lights up in FF 4.0 SuSE Linux 11.4?

  I'm sick of re-engineering random crap every time I update... How can I get "charge it" / "Refresh" button and the "stop" button back in FF 4.0? I am running SuSE 11.4 32bits. I am not no newbie, but I'm tired to do a kabuki dog dance each new version just came back to where I was before the 'new and improved... '. "Sorry for the flame but it gets old.

  A combined Stop/Reload/Go button that is placed at the right end of the address bar is used in Firefox 4.
  
  During the process of loading page it shows as a stop button and once the charging button is replaced by a reload button.
  
  If you type in the address bar this button would then become a button go.
  
  You can middle - click this button Reload to duplicate the current tab in a new tab.

  If you want to move the buttons Stop and recharge in the position to the left of the address bar, you can use the following steps:

  • Open the window "view > toolbars > customize" to move the Stop button and reload the address bar.
  • Drag the buttons Reload and stop at their previous position to the left of the address bar.
  • Set the "Reload - Stop" order for a combined "Stop/Reload" button.
  • Set the order of 'Stop - Reload' or separate them otherwise to get two separate buttons.

  Press F10 to bring up the 'Menu Bar' temporarily if the menu bar is hidden.

• new tab button stop working

  Since yesterday the new tab button stop working. I tried clicking on the + as usual but nothing happens. It lights up blue when I click but nothing else. So, I tried via file, new tab but also Ctrl + t.
  I tried to restart and update too.

  The Ask toolbar is originally only in versions of Firefox 3.6.13 +. Uninstall this extension.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• 3 peripheral USB connected to the Macbook 4.1 computer tells me to restart using the power button / stop?

  I went to record a live concert, and I need to use a single interface to record the members of the group with microphones near directly to a computer and another interface running for my model of Macbook 4.1 end of 2007, to get signals from the map of the House.

  When I plug my converter USB 3.0 AD / DA in my Macbook 4,1 - the computer sends immediately a window indicating to me to "reboot" the computer using the power button / stop. Ideas or comments about why this happens?

  I read on this forum that USB ports should work with retroactive effect, or accept USB 3.0 devices, but just use a speed 2.0?

  Thank you.

  It could be that it is a requirement of your converter AD / DA she needs to be present at a properly accessible to the OS X when startup sequence it is plugged into a USB2 port.

  Its also interesting to note that, well that peripheral USB3 can be plugged into the USB2 ports... it could be that your device may not work properly unless it is used with a port USB3... for reasons of bandwidth or even certain types of power supply.

  But to be sure...

  Which converter AD / DA are you using?

• Satellite P750-02R - put on by button / stop

  My part number Satellite P750-02R PSAY3A-02R001 used to power on/off button, but will only start up by pressing the Play/Pause button on the control panel above the keyboard media.

  I checked the BIOS to V1.90 and done a system restore. A ran diagnostics and no luck, the laptop turns off not via the power button, and if anyone has any ideas, I would be happy, otherwise, so I have to take it back to Toshiba because it is still under warranty.
  Thank you
  Bruce.

  Hey Buddy,

  I'm a little confused about your ad first, you wrote that you can t turn on your laptop via the Start button / stop and you must write m notebook turn off via the power button not / stop. This confusion of s

  Anyway, you should turn on your laptop if you press and hold the s computer power button for a couple seconds.

  If you want to turn off your laptop with this button, you must configure Windows power management. You can define an action for the s computer power button if the laptop would shut down, sleep, Hibernate, or nothing. Don t forget this must be set for each plan of power if you change them.

• Button / stop does not not how to start my mobile

  Hello

  I have the Motorola Milestone A853. I use the GSM of Auntie DOCOMO network.

  This is the second time I had a problem with the power/unlock button. (Last time I replaced him in the warranty is always there until December)

  Last night my phone battery runs. In the morning I plugged it to load, but the power button is not operational. I can't start my mobile.

  I lived the increased harshness of the button / stop for these days. But now I'm stuck.

  Another way to start this mobile?

  The closest repair center is 250 km. It will take a whole day to get there.

  Hi all

  You can start the phone without power button / stop.

  What suits you, just connect the phone to your computer. It begins, at least for me.

  Remove the battery and insert again also also works some time.

  I got the power button on my phone replaced under warranty!

  Thanks to MOTO Customer CARE!

• Satellite A300 - 15K - 2 media buttons stopped working

  Hello.

  I have a problem, the first 2 of my multimedia buttons stopped working...
  I tried to uninstall several times but it didn't help.

  I also have nothing to choose in the list in

  Toshiba Assist-> optimize-> Toshiba Button Support.

  I need help. (there were 2 posts before).

  Hello guys

  Can you please stop crying here, and perhaps tell us what the problem is here?

  Expensive J3... what you are writing about. What operating system do you use? What drivers? What kind of error?
  Multimedia keys are not controlled by drivers. What is - that you already tried?

  Hay metalbullet, the same questions for you - what order, what OS? Sorry, but you didn't offer any relevant information.

  Have you tried with this VAP suggested by Akuma?

• Buttons stops responding when the event takes place

  I have two independent loops while in a VI. A while loop have a structure of the event. Buttons stop responding when the event takes place. Is there a solution for this problem.

  If you change the event you can see the 'Lock Front panel' option, if you uncheck the box that your PC will not be locked. But the wisest method does not perform any operation within the structure of the event.

• Nitro V15 - button / stop does not stop is

  Hello

  I bought a Nitro V15 Windows 10 and when I press the power button, nothing happens at all. I saw that there is a "Acer power button" app installed that allows to stop or power standby extended. My power settings are defined in a way that the power button should hibernate the computer is running on battery or so that the charge. If I hold it for 3 seconds, then it requires has cut (no not a good closing) then the button works - and of course when you start the laptop, it works fine.

  How can I get the original from the rear switch functionality?

  I don't understand why the power button functionality has been removed?  We recently bought one Acer laptop (not a Nitro), and who has the same problem. So I guess it's one thing to Acer.

  Thanks for any advice in advance!

  Fiper / All,

  I just got the message that is the (indicated in bold) below Acer support team:

  "Thank you for contact Acer support.
  In regards to your concern, the settings that are currently installed on the system is the best settings to use. Basically, Windows 10 you can click the start (Windows logo) and it has the ability to shut down or restart, etc. This will allow you to close all programs before you shut down the system and avoid system problems.
  By pressing the power button for 1 second mark the system hibernate so you can still use it on a while later while all applications that you left behind are where you left them. However, if you like, you can go back to the power settings and adjust the settings (press the power button / stop) change to stop instead of Hibernate. "

  I knew only by pressing the power button for 3 + seconds force a full stop and I was not aware that by pressing for 1 second not hibernation or anything that can be defined in the power settings. It works perfectly.

  I recommended that they consider finding a way to clarify this point for Acer laptops users, like after a week of searching on Google, I can confirm that I was not not only know this one second by pressing option.

  IronFly, thanks for trying to help!

  Kind regards

  Dundy

• What button / stop pressed power on display Nothig but what liberation turns off

  Hi all

  I have HP ProOne 400 all in one PC

  When I press power button / stop hard drive LED turns on but nothing shows on the screen when the power button turns off during this power LED remains on. I checked with another power adapter the same power response is quite well.

  Concerning

  Muhammad Xochitl

  I discunnect all the components attached to the motherboard and plug one by one. Now its working fine

• My habit of HP G62-455DX' turn on. but the Start button / stop flashes with indicator led F12 or wi - fi

  My habit of HP G62-455DX' turn on. but the Start button / stop flashes with indicator led F12 or wi - fi. u ' is the problem with that? Help, please. Thank you...

  Perform a hard reset on the phone. To perform a hard reset, follow the steps below

  • Unplug the PC laptop AC adapter
  • Remove the battery from the laptop compartment
  • Disconnect external devices or devices connected to the laptop. Press and hold the power button for about 15 seconds

• lost my button mute on the taskbar background

  I lost the button mute in my taskbar, and is not in the area of icons hide. What should I do to get it back?

  Hi donnanicholson42,

  ·          Did you the latest changes on the computer?

  Read the articles and check if it helps.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

  http://support.Microsoft.com/kb/319095

  How to display the Volume icon in the Notification area in Windows

  http://support.Microsoft.com/kb/279435