Lost the ability to copy files from one disk to another?

Similar Questions

• BSOD after copying the large number of files from one disk to another

  Hello. I hope you can help because this issue is very frustrating. Just built a new PC:
  -Gigabyte Z97X Gaming 7 mobo
  -8 GB Corsair vengeance 1866 mhz
  -EVGA GTX 770 video
  -CPU Intel 4770K
  -two hard drives of 1 TB WD black in RAID 1
  -one ADATA 256 Gb SSD as drive OS
  -a 1 TB drive Toshiba
  -Windows 7 64-bit professional
  -F3 Bios Rev

  System can work very well for everyday, but when I copy large number of files from one disk to another (i.e. 70 000 files, 80 GB), shortly after (10 to 30 minutes), I get a BSOD bugcheck.

  I ran MEMTEST86 for hours without error. I can run PRIME95 with max heat without error. And as I said, it seems to be fine until I do a copy of large files. It seems not to matter to this disc, I copy to/from. Start WIndows, I see no activity CHKDISK. Ideas?

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 25/06/2014 19:55:50
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Daddys-PC
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 00000124 0 x (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 062514-6692-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      32358
     
     
      System
      Daddys-PC
     
   
   
      0 x 00000124 (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401)
      C:\Windows\MEMORY. DMP
      062514-6692-01
   
  

  No problem, thank you!

  All attached files of the DMP are the verification of bug WHEA_UNCORRECTABLE_ERROR (124) .

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8008788138
  Article @ fffffa80087882c0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: Internal unclassified (Proc 4 row 1)
  Status: 0xbf80000000200401
  Address: 0x00000000fee00040
  Misc.       : 0 x 0000000000000086

  Internal unclassified error, this implies that it is not publicly documented and there is no way to identify the error.

  -----------------------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it can be at the origin of the conflict:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Gigabyte Saver Easy, Easy Tune, as well as all the another bloatware Gigabyte, it is very problematic.

  4.

  2: kd > lmvm marvinbus64
  start end module name
  fffff880' 04c 51000 fffff880'04 c 95000 MarvinBus64 (postponed)
  Image path: \SystemRoot\system32\DRIVERS\MarvinBus64.sys
  Image name: MarvinBus64.sys
  Timestamp: Fri Sep 23 17:17:03 2005

  Pinnacle Studio Marvin Bus driver, dated 2005. Too old to work with the operating system, so please delete the software + the device (if any).

  5 please remove your Rainbow Tech/SafeNet USB security device if there is no update for its software, device drivers are too old.

  -----------------------------------------

  If all else fails, there's only so much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick

• I've lost the ability to copy files on my CD player. When I drag and drop, the only authorized action is 'move' and it does not work.

  I've lost the ability to copy files on my CD player.  When I drag and drop, the only authorized action is 'move' and it does not work.   I tried press and hold the CTRL key while dragging, and when I do that all the other disks show "copy" as the default action, but when I hover over the action CD player available only changes to 'pass '.   I ran the Microsoft Troubleshooting tool for CD/DVD players and he said that the media were not writable, but there is a blank CD in the drive.  Any ideas on how to solve this problem?

  Thanks, but the cd/dvd drive works well - I can burn a cd with windows media player for example.  the problem is that I can't copy files to it.   I can play CDs (haven't checked the DVD).  I can not do and could do before, is doing drag and drop files on it.  The only authorized action is "move".   This happens even when I click CTRL + do drag.   I can copy it to any other player, but the CD player, and when I hover over the "exemplary" drive CD goes to 'move '.

  have you tried using a different suite of cd/dvd burning?

  Imageburn is free and easy to use: http://download.imgburn.com/SetupImgBurn_2.5.7.0.exe

  There may be something to play with your access keys if you have a (ie., wirekeys)

• How display location of the files from one disk to another >

  I have a backup utility that daily backup automatically to the top of my files from the computer to the C drive to D drive. I would like that he back up drive J. How re - routing the destination of this file?

  In your backup utility? If you select a backup D drive on, I think you should also be able to select a drive J.

• How can I copy files from one disk to the other?

  I want to copy all my mp3 files from my ITunes music folder on an external hard drive.  I'm not interested in records, only the mp3 of themselves.  I got here in 'terminal' that I can execute a command?  Please notify.  Thank you.

  Just use the search function in the Finder.

  Select the folder enclosing and type MP3 in the search.

  If you have not changed the search preferences, you will need to click on the name of the folder next to "this Mac.

  It should list all the MP3 files.  Select all and drag to the external hard drive.

• Permissions do not update every time that a user moves a file from one folder to another in the Windows XP computer.

  Original title: folder permissions to move or copy.

  I have a problem that I'm sure has a simple explanation but I don't know.  I have a folder in the tree that whenever a user moves a file from one folder to another, the permissions do not update.  Yet if a user copies the folder to the same location, permissions to update as expected.  This only happens with XP.  If I try with Win 7, if the user moves or copies, update permissions.

  Has anyone seen this or have an explanation?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• How to copy a file from one folder to another?

  Windows 7, my images: how to COPY a file from one folder to another?

  Right-click on the file and drag it to the other folder. Release the button on the right and click on copy here.

• Copy some files from one user to another

  Hello!
  
  How can I copy (not share) some files from one user to another?
  
  The reason for this is because we rename users to other allocation model.
  
  Thank you!

  You must share the folders you want to transfer the ownership of the new username, or one responsibility that the new user has (I guess that's an Oracle Applications EUL). The user connects to Discoverer more with their new name. They open the workbook (s) and then do a SAVE AS. Who will save the workbook with them as the new owner. You must then sign with the old name of the owner and to delete these old files (after the first backup them) once you are sure that everything works fine. Yes, it is a nasty process. What we do is we use a "dummy" username when we create/modify the workbooks. In this way the fictional user name is the owner of the workbooks. So, it does not matter if a person leaves or if you change the user naming conventions. If you have many users to create cabinets, then a dummy user name doesn't quite work. You could always submit an enhancement request to Oracle for a copy function. I hope that you will get a lot of customers to support such a request.
  John Dickey

• On my iPad, can I move files from one folder to another, but not in the Preview file, why?

  When you manage files in iCloud, from an iPad, I can move to the files from one folder to another, but not in the Preview file. Secondly, when I check the file Preview to iCloud from Mac content is so different when you look at an iPad. Why is the gap between the iPad and the Mac?

  Try to go to iCloud.com to see if the elements are there and whether the device or the computer. That should indicate if the device or computer is not synchronizing. If the computer, try going to System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing. If the device, go to settings/iCloud and do the foregoing.

• Need help with the error message when you try to transfer a file from one laptop to another.

  I'm trying to transfer a file from one laptop to another using Belkin transfer cable. While trying to install software for my old laptop, I get an error message as follows WET7CABLE ERROR OPEN. LOG FILE. I tried with the support of Belkin and they referred me to Microsoft. Please help me with this question.
  Thank you
  Nelson Santiago

  Hello

  It is a matter of easy transfer Windows.
  Read on this and the solution here:

  http://support.Microsoft.com/kb/980870

  Kind regards

  Joel

• How to move the FILE from one place to another and keep "Indexing" have to move to the unknown location so you can't discover its full file path? Windows instructions provide information wrong re: how to do this!

  Make a bunch of audio files, placed in a folder on my desktop. Files initially sent to RealPlayer to burn, but when finished burning CD and went to read a CD, folder got seized by Media Player, 'Indexed' and disappeared from the office. I'm a relatively new computer user, and I need to learn more about file paths, how to view the path FULL of a file on my computer and how to type (create) full path when I need to. The "Indexing" feature seems to erase this lesson for me, and after having spent four hours trying to find Vista instructions on "How to move the file from one place to another", I gave up! Windows 'Help and Support' on my computer gives wrong directions. It states that if I right click on a folder > properties, a dialog box opens with a tab by which I can move my account. There is no tab location here. I found locations tab when right click on the "Mobile" folder, but still no option to "move file". No idea what is the folder "Roaming" or why it's on my computer. I want my audio files in the My Music folder, but this place is "access denied." Don't know how to get the audio file it in any case, but if anyone has any advice, I would be very happy! Thank you. PS - I had no problem moving folders in XP. I don't like the idea that a computer is to decide where to put my files. I want to control where I put my files. I don't like the way search works under Vista. I liked the XP search companion better because, for a computer fool like me, it was really easy to organize and find files and folders and had an option specific to find audio and video file TYPES.

  Here is an article on how to move your personal folders in Vista: http://www.howtogeek.com/howto/windows-vista/moving-your-personal-data-folders-in-windows-vista-the-easy-way/.  If you're talking about the special folders (such as photos, Documents, office...), then here is an article on how to move: http://www.winhelponline.com/articles/95/1/How-to-move-the-special-folders-in-Windows-Vista.html.

  If you have trouble with the search after you move the files, then rebuild the index: http://www.tech-recipes.com/rx/2103/vista_rebuilding_the_search_index/.  Here is an article on how to use Indexing Options in Vista that may be useful for you: http://www.vistax64.com/tutorials/69581-indexing-options.html.

  If the above does not help, your problem seems to relate to the image of the files/folders and their interactions with Media Center (which operate on different other folders).  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues of the image will be more than happy to help you with your quesitons.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 and I have a batch file to copy files from 1 computer to another. It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening

  I am running Windows 7 and I have a batch file to copy files from 1 computer to another.  It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening.  None of the files are copied, and the control box does not appear.  Any ideas?

  Run a batch file in Task Scheduler

  Hello ITGIRL17,

  Thanks for posting on the Microsoft answers Forum.

  Configure your task under your administrator account.
  Then go to the folder with the batch file and ADD on control for the folder administrator permissions and each of the files in batches.
  If the batch files write data, then the target for the task should ALSO have all explicit permissions.
  Now try to run the Task Scheduler task.

  Also check the information from the following link and look specifically at Brian Vandemark Sommaire steps on 2 September.
  http://social.technet.Microsoft.com/forums/en/winservermanager/thread/d47d116e-10b9-44f0-9a30-7406c86c2fbe

  I hope that this information will help resolve your batch file does not problem.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Copy data from one schema to another. Reopen the Question

  Hello
  
  I had asked this question earlier to copy data from tables of one schema to another in the same database using the database link. In my previous post have mentioned below.
  

  Re: copy data from one schema to another.

  Now I am faced with the question for the remote copy of database
  
  I have created a DB connection between my local system and the remote database. with the chain of connection as shown below
  

  CREATE THE DATABASE PUBLIC LINK "MERU_DEV_LOCAL_DEV".
  CONNECT TO MERUDEV IDENTIFIED BY MERUDEV WITH THE HELP OF "MERUPROD";

  In the above script
  

  LOCAL DEVELOPMENT scheme IS
  REMOTE schema is MERUDEV

  I try to copy remote database to my local database tables using the script below.
  

  network_link DEVELOPMENT impdp = schema MERU_DEV_LOCAL_DEV = MERUDEV remap_schema = MERUDEV:DEVELOPMENT TABLE_EXISTS_ACTION = REPLACE

  But the copy of the table does not occur. What could be the problem? Please suggest me or do I need to modify the script
  
  Thank you
  Sudhir

  You can:
  -monitor the BONE with ps - ef
  -monitor data pump: jobs are dba_datapump_jobs and dba_datapump_sessions
  -monitor with logops: v$ session_longops

• How can I copy files from project Waveburner to another internal drive?

  How can I copy files from project Waveburner to another internal drive without losing the connection to the files audio orig.?

  Thank you for your time,

  Since no one answered my call, I sat and researched and studied WaveBurner behavior and I can myself answer my question and solve. Since there were a lot of people asking similar questions on WaveBurner files I will post what I learned.

  Whenever you drop your audio files in the list window to make your WaveBurner CD copy not copy your audio files, but relies on the original audio file, where they are located. So whenever you move the files orig. and you open WaveBurner, it can't find those and displays an error window to suggest it will search for the missing file or if you know where he is now lets you find manually. WaveBurner usually place the .wb3 project file that contains everything including your home folder.

  For this reason, I reserve now an audio file WaveBurner also folder in my home folder. In order to save themselves from WaveBurner cannot find the audio file, all audio files that I do, I put in my folder of audio files WaveBurner first, then copy them in WaveBurner from there.

  When I need to use a bigger hard drive I copy .wb3-WaveBurner projects based, but also my

  Sound folder WaveBurner for the home folder on the new hard drive.

  WaveBurner is now all audio files without problem.

  I hope that this will be a unique problem to someone else. Happy WaveBurning.

  W.W.

• I can't move files from one folder to another on Windows Vista.

  Hello

  I can't move files from one folder to another in windows Vista.
  It is quite frustrating.
  I am an administrator of the account.
  I get an error saying that I don't have permission to do the action.
  It is said: Destination folder access denied. You need permission to perform this action. Then the buttons 'Try Again' and 'Cancel '.
  Help, please!
  Here is a link to an image of the error I get when I try to move a file:
  http://Tinypic.com/r/263hswk/5
  Thank you
  Jeremy

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer
   

  If you cannot start the Explorer at all

  • Press Ctrl + Alt + Delete and choose Task Manager
  • Under the processes tab, click Show processes from all users to elevate to administrator
  • In the Task Manager, click the file menu and then click new task (run) and type cmd
  • Other things you can try typing
    

    Explorer
    Explorer c:\
    Explorer/e, c:\
    wercon
    control
    Iexplore
    Rstrui

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll

  
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll
   

  Delete the folder and the settings of the Menu

  This will remove the settings are saved for each file that you visit. Also the order of the start menu.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  RD C:\$RECYCLE. BIN/s/q

   
  then repeat for each drive to change the drive letter, for example
   

  d:\$recycle Rd. BIN/s/q

   

  e:\$recycle Rd. BIN/s/q

   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  MD "% userprofile%\DesktopTest".

   

  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f

   

  MD "% public%\desktopTest".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f

   
  To restore default after having tested if begins to explore.
   

  Set ExpFix1 = % user

   

  Set ExpFix2 = % profile

   

  reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   

  Set ExpFix1 = % Pub

   

  Set ExpFix2 = % lic

   
  reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
   
  You will need to disconnect then.