-
CS3 (Design Premium) Activation x 86 / x 64 studied.
I checked a few around forums and found a few posts on 64-bit Windows, but wanted to ask before I go back to College.
I had one laptop running Windows Vista Ultimate (32-bit), installed, registered and activated CS3 Design Premium I got from college and all was well for about a year. While he is on sick leave from the College that laptop fried (I could not first disable it) and I purchased a new one. This laptop has Vista Edition 64-bit Home Premium and I have been informed by your fellow students and teachers that there are issues with the CS3 release on x 64 which seems to address some of the things I've read on these forums.
So I guess my main question is, given that I have to use practically all applications of the suite for different classes, don't dare install on x 64 Vista copy and pray it does not break when I have a deadline or should I install it in x 86 Virtual Machine, I installed some other applications I need to run (the VM is slow for some reason any already there don't want analysis snail running several) Adobe applications as well)? The only other option that I really at this stage is to try to install it on a x 86 version of Windows 7 RC, than to reinstall it again when I can put Windows 7 Ultimate final (probably x 86) in October.
Summarize:
Should I install on Vista Home Premium 64-bit?
Should I install on Vista Ultimate 32 bit (inside a VM)?
Should I install on Windows 7 RC/Final?
{Note: for medical reasons, the office is difficult for me to use for longer periods without problems}
You get no guarantees as to a particular system, but CS3 is fully supported under Vista 64 (except for Home Basic). I'm running it on Vista 64 Ultimate with CS4 without operating system related issues.
Bob
-
I can't activate CS3 Design Premium
After several re-Setup cannot be activated CS3 Design Premium.
Writing that exceeded the number of activations.
Computers are is more triggered before that would be disabling.
My certificate ID: CC0810458.
Help me please.
Contact Technical Support by chat, and ask them to reset your activations. Only ask for it or they may send you in the forums. They do so because they contain more legacy products and when you get off topic and discuss that need more reset, they determine that you ask for the support that they do not provide.
Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.
Serial number and activation support (non - CC) chat
https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp
In this case to associate a volume license then contact support is not going to work.
Volume licensing
http://helpx.Adobe.com/x-productkb/policy-pricing/volume-licensing-site.html
Volume License Activation number: https://forums.adobe.com/thread/1526938
-
I can install CS3 Design Premium I bought in 2008 on a new computer?
I would like to install CS3 Design Premium on a new computer. The old computer was recycled. I have the serial number and supposed to be downloaded the software but never asked me my serial number and CS3 programs are not on the new computer.
Thanks again. I had not received any errors so I tried to install it again and was able to download the product Adobe Creative Design 3 in 2008, I bought for my new computer refurbished. Everything was done using Adobe Acrobat successfully. Here's what worked. First of all, I deleted what I had downloaded from Adobe. Then I signed my Adobe account until I downloaded the product that I bought in 2008. A representative of Adobe had given me this link. It was two files, that I put in the same folder. I found some instructions that said to open the Adobe files and double-click "Setup." That downloaded files. Then when I open Photoshop it asked for my serial number, I had, fortunately.
-
CS3 Design Premium have uninstalled but not disabled
I reinstalled Windows 7 and CS3 Design Premium (the Windows disk is dead) without disabling CS3. I reinstalled Windows and CS3 and now I can't activate/register because the activation limit has been exceeded. The phone activation is no longer supported. I followed the instructions from helpx.adobe.com several times, but the internet remedies recommended by Adobe do not seem to work.
Can anyone help with advice on where I go from there to get my CS3 works again? How can I get Adobe to disable the now non-existent copies.
You should contact the Adobe Support via chat and ask them to reset your counter to activate CS3 (do not ask more than that). CAT may be unavailable until the weekend.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Serial number and activation support (non - CC) chat
http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )
If you have no problem getting the cat/access link attempt to use another browser.
-
I have a license for CS3 Design Premium, but not drive. Exactly where can I download the software? The solution on the Adobe Web site does not work...
I have a license for CS3 Design Premium, but not drive. Exactly where can I download the software? The proposed solution on the Adobe (CS3 products download) website does not work...
If the page that you are connected does not work, then it should so what happens when you try? It is possible that it could be a simple matter of enable you cookies or try a different web browser.
You can also try to download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
-
I receive an error message 404 download CS3 Design Premium
I am trying to download CS3, Design Premium for Mac, and I am directed to an error page. Help! I upgraded to the Mavericks and my CS installation has been lost or sloppy.
What is the url of the link you are trying?
Have you tried using another browser?
-
CS3 Design Premium - InDesign / Windows 7 64-bit Installation ERROR
Help, please! I posted this message 2 weeks ago and not 1 response. I tried to be as detailed as possible, but maybe it's too long. Anyone?
I have CS3 premium design that I loaded 64 bit Windows 7 successfully on a computer. I have 3 licenses and trying to load CS3 design premium on a computer laptop 64 bit Windows 7. I have the following message
System check
The minimum system requirements below is recommended to successfully run Adobe Creative Suite 3 Design Premium and is not met:
- Screen resolution of 1024 x 768
It is recommended that you upgrade or adjust your system to meet these minimum requirements, and then restart Setup.
Note: my current screen resolution is 1920 x 1080 and I tried every other screen (including the 1024 x 768) resolution and continue to get the same message.
After I click on NEXT and then accept the license agreement Setup will not install Adobe InDesign CS3 (System verification) (Note: out no checked and grayed out). I can't check Adobe InDesign CS3.
(System check) also follows Adobe Illustrator CS3, but I can check or uncheck Adobe Illustrator CS3 (Note: (System verification) is grayed out).
The message on the Display Options of Installation is:
(Yellow triangle with exclamation point) The minimum system requirements below is recommended to run Adobe Illustrator CS3 correctly and is not met:
- Screen resolution of 1024 x 768
(Red X) The minimum system requirements below is necessary in order to launch Adobe InDesign CS3 and is on met.
- Screen resolution of 1024 x 768
I suspect it has something to do with the resolution, but the problem persists even when you use the suggested 1024 x 768 resolution.
Any suggestions?
VERY frustrating... and the solution found. I guess it works for the Mc and the PC (I use W7 X 64). By disabling all (or in part, for those who are multi-GPU) display cards found in the Windows Device Manager, you can force Windows to use it is display driver 'in house' credits. This gave me only two display resolutions. 800 * 600... and the ellusive never 1024 * 768. I'm running a Radeon HD 5700 on a 32 '' Vizio and tried each ground including display 1024. I even tried installation in silent mode by forcing low ground with F8 at startup, fail.
So try to disable your display adapter during installation, and then him to again once you have finished.
Laughing out loud. Yes, I was quite twisted... But I just finished my installation... Not the only question this time is...
-
CS3 Design Premium
What version of Mac OS you need to install Adobe CS3 Design Premium, because I had difficulties in El Capitan.
Olle
Older software against new BONES are often problematic. The following should give you an idea of how old a CS3 system is designed for. Anything more recent that which is specified is chancy, if you could Google versus CS3 specific systems to see if you can find someone who got lucky. Try searching for: "The El Capitan CS3 compatibility" (https://www.google.com/search?q=CS3+El+Capitan+compatibility )
Adobe - Adobe Creative Suite 3 Master Collection: System requirements
-
Can I install CS3 design premium for windows 10?
Can I install CS3 design premium for windows 10?
Not supported, but you can try
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
-http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html
- or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
I am looking for the installation of CS3 Design premium for Mac program. Adobe Acrobat Professional 8
I was updated Acrobat and received the message that there are missing components that need repair. I need to uninstall acrobat and re - install, but of course to find the original disk is impossible.
Hello
You can download it using this link Download CS3 products, in order to install Acrobat 8 Pro you will need to install complete CS3 Design Premium, as that was the step of the Creative Suite.
Kind regards
Nicos
-
Try to reinstall Adobe Design Premium Web. I have the serial numbers for this product. Download image appears on my desktop. Click on the image and 'unrecognized image' help!
Try to reinstall Adobe Design Premium Web. I have the serial numbers for this product. Download image appears on my desktop. Click on the image and "unrecognized image '. Why?
Please try to download Creative Suite 6 applications and start the installation.
Please let us know if you are unable to install it.
-
ADOBE CS3 DESIGN PREMIUM
I have the Adobe CS3 design premium and the CD but I have a new mac and that you cannot use the CD to download the product. I have the serial number as well just need to find where to download the product
Download the CS3 products
-
Download CS3 Design Premium
I paid license for CS3 Design Premium (with Serials) and need to re - download the installation software to switch to a new machine.
I believe that this process must be completed by the help of adobe Manager... Can anyone give me some guidelines on how to do it? I downloaded the help Manager, but we know not not how facilitate you any download process.
Thank you in advance!
If you follow the 7 steps you can directly download a free trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
and activate it with your serial number.
If you have a problem downloading, you follow the 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).
Unable to obtain the cookie translates into an error page displayed after clicking on a link on prodesigntools.com
-
Want to upgrade from CS3 [Design Premium] CS5
Hello
You want to upgrade from CS3 Design Premium CS5 and I saw there is a difference in price of the update since CS4 and CS3. Stupid question: if I bought the CS5 upgrade, I would be able to install the suite or it asks for the previous version of CS4? If she asks only CS3 I would really put some $$$.
Can you help me
Ellen
Sorry, but the answer is no you can't pass a suite to a single product. A lot of people miss this restriction if you choose to purchase the Suite. Adobe locks for purchase of upgrades for all once more that you've crossed him not you. So the short answer is that you must purchase the upgrade for the entire suite.
Check the recent thread on 'Adobe GREED' recent experience of another person with it.
-Christmas