Lots and source control

Similar Questions

• HR HTML 9.02 and Source Control 3.1 will not save files in design mode, only the HTML view.

  We use RoboHelp 9.02 (just 9 and charged the next day so up-to-date, we 9,02) and Robo Source Control 3.1 and when we check a file and change the file, we can not save the file in Design view.  If we click on the HTML mode, we can save the file.  We have reproduced this on multiple files at the same time our computers accessing the server.  Now using RoboHelp HTML on a local project is functioning normally, only when we have access to the files on the server we select the HTML mode in order to save the topic.

  While this is an acceptable work around short term, we need this bug to get fixed unless someone knows of a checkbox somewhere that we must check in design mode to record and studied.

  I will be happy to provide you with any input and or test the additional fixes to help to fix this bug.  It is completely reproducible and constant on all tested subjects.  Source code control works insofar as this case the subject is verified by one the other cannot access the topic.  Once the topic is saved in HTML, then the subject can be archived and changes are visible by the other author.

  After the installation of Robo 9, Adobe Acrobat Professional 8 has been removed from the computer and MS Word 2000 did not work.  I've upgraded to Office/Word 2003 and I can now use Word 2003.  I have not attempted to reload Acrobat yet but that is next on my list.  Acrobat Professional was removed from these two computers during the installation.  Word 2000 exists only on the laptop.  I was in the queue to get updated later in the year, so they gave me a key and Word 03 seems to operate normally.  Did not check the Excel or PowerPoint 2000.

  Other news, you may be interested to know:

  • Both computers use Windows XP.
  • Both have office 2003.  -C' is because Word 2000 stopped working when Robo 9 has been installed.
  • Both have with max memory 32-bit operating systems.
  • Both have multiple monitors.
  • One is a laptop, the other is a desktop computer.
  • Both computers had 8.02 Robo? but RH8 was uninstalled before installing RH9.
  • 3.1 source code control has not been reinstalled on the server since version was the same that came with RH9
  • Source control has been reinstalled as a step of troubleshooting on the laptop without change.
  • RSO3 middle-tier service is running on all 3 computers and RSO3 server runs on the server pc.
  • Two users have administrator rights so all of the checkboxes are checked for access and control.

  Kind regards

  DV

  Having identified some problems in our global variable file in another project, I had a look at this project and found a few variables were empty, have a mystery character input or information applied to the variable fonts.  Rather than change back the variable only one digit or a character with no set form and text input in variables of the virgins, I deleted the unused variables of the project that just happened to 99% of the variables because we divided this part of the project in a booth along the project.  Remove the variables solved the problem where we had to switch from Design view to HTML view in order to save a topic.  I find this rather strange since none of the topics referenced stray variables.  Now we have only the variable of the version that refers to all subjects in the foot.  Everything seems to work fine now.  If you encounter this problem, have a good look at your file of global variables, line by line, to see if there is something other than text or numbers and delete everything except for the text.

  DV

• Multi-authoring with source with RH10 and RH11 control

  Location:

  • Writer runs RH10. Writer opens the A project, Visual Studio Source control, which is connected to a Team Foundation Server.
  • A new employee, writer B, gave RH11.
  • A writer cannot install RH11 until after mid-June because of the tight programs (cannot afford any upgrade).
  • Writer B is supposed to work on the same project. (We know that RoboHelp does not support check the same file at the same time).

  If writer B configures its RH11 version work with TFS and Source code control, can open A project and work on it (from Source code control) without causing problems for A Scripting Guy?

  Thank you.

  
  Carol Levine

  Hi, Carol

  The scenario that expose you, (unless I'm missing something) I don't think. Writer B certainly could open A project. But from the opening, she will receive a dialog box asking that she 'upgrade' it format Rh11. Unfortunately, it is a one-way street. Once converted, A writer could not then open it in Rh10. enter here for workaround solutions, perhaps writer B could create content in Word that you could import or 'Link' to your project Rh10 and regularly updated until June, but it's probably not practice. Maybe someone else has a better idea?

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• Source for RH5 and 6 control

  We have two licenses for RH6 and four for RH5. Can we use the RoboSource COntrol 3 supplied with 6 HR under control of source code for projects both RH5 RH6?
  
  Looks like we should be able, but we're just starting on the use of RSC3 and details are difficult to find.
  
  Thanks for any help.

  Hi tojo45.

  I'm afraid you may have problems to get an answer on this one, because not many HR users using control source code and those who use the other tools of SS. However, I agree that, in theory, you should be OK as all the source control s/o will do is check in/out of the files. He shouldn't worry about what files they are. Also as RH6 and RHX5 are largely the same, you would have less risk than if you had RH7 licenses.

  I create backups of files RHX5 and RH6 and run a few tests. It will probably be the only test.

• Which supplier Source control would you recommend for a single developer on a labVIEW project moderately important

  I have not used a front Source control provider.  My hope is that I don't have to deal with a large learning curve in using the basic features of a source control provider.

  Also curious is the most popular provider used by LabVIEW developers.

  Thank you.

  If you are getting started with Subversion (Tortoise SVN is the 'client' to a Subversion server), you have the choice between three options:

  1. Use a server Subversion maintained by your company or your University.  (I, fortunately, put at my disposal one).
  2. Use a commercial Subversion server.
  3. 'Rolling' (which means that the other host a server yourself, on your PC or on another PC, or simply use a 'local' repository).

  I listed them in the following order (according to me) that it is "desirable".  I, myself, would be enough worked to avoid Option 3, because it puts all the "eggs in one basket', in other words, you must assume the responsibility of not only keep your code Committed/updated the repository, but you must keep secure, backed up repository, and 'remote' (if your house burns down and the external unit containing the repository also goes up in flames you lost everything).

  I recently started a collaboration with a colleague in the Canada.  Because of institutional policies, I couldn't access our server local to Subversion, but found that assembled (www.assembla.com) offered a Subversion server access at a reasonable cost.

  Once you have identified a server, get your created repository and your project saved in the repository is not too difficult.  A practice I found works well is to organize the filing of LabVIEW, one project per repository projects, with the name of deposit is the name of the project.  I have adopted the model of trunk/branches/tags subfolder for the repository (i.e. the filing "Of Bob Project" will have a trunk, a branches and a subfolder of tags), with most of the activity taking place in the trunk.  I try to use the branches almost never, but that's another story.

  There are a number of tools to put "hooks" in Subversion in LabVIEW.  My personal preference is to do all my work of Subversion at the level of the Explorer of Windows files, validation and updating of entire projects to the end and beginning of work sessions (commit to the end, updated at the beginning).

  Bob Schor

• Save and read control values

  I have a program which is highly intensive GUI.

  It has almost 100 boxes of orders/combo of chain on the front panel.

  Once the user fills all the fields, I need to save all the values to a file.

  I don't care if the user can open/view/play the file, I just need LabVIEW to read.

  Later, it the user will need to load this file and all controls have to be filled from the file.

  From what I have seen when looking for boards of Directors.
  I heard a lot of suggestions like this that say I should

  all controls to group together, and then use the XML functions to read/write.

  I have attached a version very very simplified from what looks like the Panel front of the program.

  Do you agree with the above method? Or do you have another way you prefer?

  I would always try to automate it. Rather than treating each control manually, you can do something in this direction or change my previous example:

  

  The big advantage is that you do not have to write manually to the code for each single control and when you add controls he just continues to work. If the controls are not all channels, you can use the OpenG screws to convert a string of variant human readable.

• Using microsoft TFS source control

  I'm putting in place source code in labview control using Microsoft TFS. I have installed on my TFS machine but when I try to implement source code control I get the None choice on the traction to the bottom of the box for the selection of the source control. The help file said it should Auto complete by reading the registry to determine what kind of source code control is used.

  Any suggestion would be appreciated

  Thank you

  Jim

  To connect with TFS an additional plugin is required. There seems to be at least two versions of the plugin - 2008 and 2010. Here are the links:

  2010

  2008

  Once the plugin is installed, an entry for TFS should appear in LabVIEW.

• Download pots API and source

  Is there a place to download the API and source of pots for the lib of RIM? I find the API behind online a lot, and it would be good to have a source JAR to work in my IDE.

  The BlackBerry development environment is not a platform open source so RIM does not publish the source for what in the net_rim_api.jar.  They include that jar in the jde/lib directory, so you can compile against this in your IDE.  They also include the javadocs in the jde under docs/api directory download (so late on, you mean slow access on the net).

• _doPostback(), calendar and dropdown control does not work on blackberry: RIM's support that?

  Hi all

  I develop mobile site in ASP.NET 2.0, which should work on most common browsers includes blackberry.

  but javascript _doPostback(); fuction does not work, also dropdown selectedIndexChange event also does not work.

  drop-down list and calendar control internally uses _doPostback().

  RIM who makes? If not, then what is the alternative for the drop-down list (I have a lot on my pages).

  Please, give me your feedback if RIM supports _doPostback(); or not.

  Thanks in advance.

  great! It works fine now.

  Thank you all for posting.

• Unit testing and Version control tool

  Hi all
  
  We try to evaluate a PL/SQL developer tool that will have the following options.
  
  1. version Control (Control Version TFS or Subversion server)
  2. unit tests
  
  
  I see two options
  
  1 Developer SQL
  2 TOAD + Quest Code tester for Oracle
  
  Some you will suggest which option to go for and why?
  
  Also can we use JDeveloper or any other for this purpose?
  
  Please notify.
  
  Kind regards
  Hari

  It is somewhat a generic question.

  different tools have benefits different and different tools suit different companies and how projects that are managed or how the development is made etc..

  Some people may prefer to use these tools just for the development of the code, but for example use the CCS for source code management and version control, then develop their own unit test scripts, or have dedicated 3rd party tools in order to test the individual unit, business, test system etc. of test cases.

  Without knowing your company's configuration and requirements in detail, it would be difficult to say that one thing is better than the other in most cases.

• I use the latest version of firefox, but cannot print all downloads. I tried to use the icon to print the downloaded form and also control P

  I tried using the icon of the downloaded form printing and also control P, but only get a blank page. I even changed my printer, but it did not help. My print menu looks the same, and I have quite everything, print only with downloaded files.

  Hello, it's currently a bug in firefox's built-in pdf viewer that is studied by our developers. in the meantime, you can use a plugin third pdf as Adobe that you can enable in the firefox options > applications -scroll down and set the default action for the portable document (pdf) format.

  How to disable the built-in PDF Viewer and use another Viewer

• in Firefox can not see the window of downloads, specialist of the jump in the trunk to be saw - the speed downloaded a lot and now can not see how to fix it?

  in Firefox can not see the downloads window, specialist of the jump in the trunk to see - the download speed
  Downloaded a lot and now can not see how to fix it?

  The download Panel has been moved to the upper right corner with a circle arrow down. You can also visit on: downloads of your browser to visit all your downloads.

• Satellite A200-1VP - Trackpad and the control volume

  Hello

  for the first time posting here so apologies in advance if I posted this topic in the wrong place or have not included all relevant information.

  My question is about a Satellite A200-1VP I bought recently from a friend. Model number PSAE6E-08D02YEN. The laptop has been completely annihilated and installed Windows 7 Ultimate before being redeemed.

  This seems to have brought the track pad and volume control to stop working.
  Are there drivers available that I could try to help to solve this problem?

  Thanks in advance.

  Hello

  I checked on http://www.toshiba.eu/innovation/download_drivers_bios.jsp Toshiba download page, and as I can see it, your machine is fully supported for Win7 32 bit, so you need to do is install all available drivers, tools and utilities.

  What version of operating system are you using (32 or 64 bit)?
  You have installed all the drivers?

• ATI Catalyst Install Manager and Catalyst Control Center help

  I just run the Windows 7 upgrade

  report from the consultant and he said that I have to uninstall the ATI Catalyst Install Manager and Catalyst Control Center and then reinstall after upgrade...

  Could someone direct me to where I could t find these programs for Windows 7

  You should not do this. Just proceed with the upgrade installation.
  On my Satellite, I got the same message, but I just kept with upgrade.
  At the end everything went well.

• FN keys and volume control does not not on Satellite A210-131

  Hello
  I have a Satellite A210-131 for 3 days now, and the FN keys do not work. The numeric keypad using FN works fine, just the F1-12 combined with FN do nothing. I have the latest drivers and utilities from the website...

  In addition, my touch volume control works quite stupid, it takes less than 20 seconds to set and then its way too hard... I always have to go to the sound control menu to change...
  Help, please!

  Hello

  It's very strange. Usually, if you press the FN key and keep down flash cards must be indicated at the top of the screen. Please try to restart flash cards: start > all programs > TOSHIBA > utilities > restart Flash Cards.

  I don't know what the problem with the touchpad and the control volume but friends Satellite X 200 (the same tablet like on your A200) works well. Problem described is quite strange, and to be honest, I don't know.