Love can work with legacy P2P free will?
Hi all!
I just want to know that can we use love with our legacy P2P Gre?
What happens if I set up love on the side of the hub & P2P on the side with rays my network. If it works?
Example of configuration of hub:
interface Tunnel1 ip address 192.168.241.254 255.255.254.0 tunnel source a.b.c.d tunnel mode gre multipoint tunnel key xxx ip nhrp authentication xxxx ip nhrp map multicast dynamic ip nhrp network-id xx ip nhrp nhs 192.168.247.1Configuration example spoke:
interface Tunnel5 ip address 192.168.24x.xxx 255.255.254.0 tunnel source e.f.g.h tunnel destination a.b.c.d tunnel key xxx ip nhrp authentication xxx ip nhrp map 192.168.241.254 a.b.c.d ip nhrp network-id xx ip nhrp nhs 192.168.241.254 ip nhrp server-only
Tags: Cisco Security
Similar Questions
-
original title: office / Home compatibility
My office uses Windows 7 and my computer is running Vista 64 bit. My home computer can work with my office from a USB files?
The game, August 5, 2010 15:24:35 + 0000, JerryPMP wrote:
My office uses Windows 7 and my computer is running Vista 64 bit. My home computer can work with my office from a USB files?
Yes. There is no problem with their two different versions of
Windows. The files contain not what anyone who still marks that
Windows version they were created under.But there is a potential problem. If the files have been created with a
another version of Office that you have, you may have
Difficulty reading the. For example, Word 2007 and 2010 creates .docx
files by default (unless you tell her save as .doc) and if you
an earlier version of Word, you will not be able to open a .docx file
unless you install the compatibility pack to
http://Office.Microsoft.com/en-us/Word-help/open-a-Word-2007-document-in-an-earlier-version-of-Word-HA010044473.aspxKen Blake
-
FSX can work with parental control times
Can work with Flight Simulator X on an account with time limit, as I wonder if the little "15 minutes of the end" and "1 minute remaining" bubble will pop up in the corner of a flight full screen FS? "
Thank you!
Hi Matthew,
The question you posted would be better suited in the Flight Simulator Forums.
I would recommend posting your query in the links below.
Community links:
http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx#community
Contact technical support:
http://www.Microsoft.com/products/games/FSInsider/tips/pages/ContactingTechnicalSupport.aspx
I hope that the information above helps you.
-
It can work with windows x 64 D - Link DCS - 900 Internet Webcam
It can work with windows x 64 D - Link DCS - 900 Internet Webcam
According to the Compatibility Center, no. It is not compatible with Windows 7.
-
my hp color laserjet 3500 printer can work with cloud services
my hp color laserjet 3500 printer can work with cloud services
The printer listed does not support cloud services.
-
CS4 can work with acrobat 6.0
Cs4 can work with Acrobat 6.0
Hi jenniferv27962904,
Acrobat 6 is a very old version, but if you already have CS4 Acrobat 9 is included with Creative Suite 4. You can use it.
You can download CS4 from here https://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
Let us know if this helps!
-
Muse of adobe can work with databases like mysql or php language?
I would like to know that muse adobe can work with databases or php. I have not used in the past this adobe program.
I thank very you much for your reply later.
Found a few postst Forum who can guide you
-
In the area of blur the pins are invisible. I can work with the pins, but I can´t see them. How can I make visible?
Hi ferdinandn
What version of Phtooshop are you using?
Is "View > Show > edit the pines ' activated when you select the blur filter?
Concerning
Assani
-
I paid a monthly subscription, but the room light informs me that the time has expired and you pay. I do so I can work with photos?
Hi Edward,.
Please check the help below document:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
Kind regards
Sheena
-
Creative cloud can work with cs5 installed on my mac?
Creative cloud can work with cs5 installed on my mac?
Yes, as long as your computer meets the requirements of system for creative cloud.
-
Agent of 11 g can work with 12 c SGD
Agent of 11 g can work with 12 c SGD?
No, agent 12 c 12 c SGD. Please check the certification to metalink.
-
Pre for Mac can work with xVid .avi files?
Well, I have some of the xVid .avi files and wonder what I should do to get the first Elements 9 for Mac that allows to work with them. I can't seem to find the right codec and I don't know if that would solve my problem even. Yes, the codec would read QuickTime files, but El first would be able to work with them?
I also thought I could use the Super video converter (free app) on my PC to convert these files to something other than Premiere Elements will love. I guess that .mov would be preferable. I don't really know if this might degrade the video, but I suspect it would be.
What do you think guys what is the best approach?
Thank you very much!
A DVD uses MPEG2 format, transcoded VOB to DVD - take a look at a DVD 'Hollywood' sometimes to see the structure of directories and files
XviD/divx are variants of the MPEG4 codec... and cannot be directly used to create a DVD... they must be transcoded
Because thay are not intended to be edited (they were designed for delivery, often via streaming video on the ' net) you will need to convert for use in PrEl
-
The iPhone model A1662 can work with T-Mobile and Verizon?
I never had an iPhone and am looking to buy the 16 GB iPhone model. Currently my carrier is T-Mobile, but because of problems of coverage in a rural area, I might want to switch to Verizon. I'm in a family plan so have other members to consider.
(1) the same phone will work with both carriers, if I buy an unlocked model of Apple?
(2) I will be able to use WiFi calling if I buy the unlocked model of Apple?
(3) are there other things for me to consider? Of course, I'm a beginner with the iPhone (although use a 3rd gen iPad), so I probably don't need the fancy options for a long time. I could on vacation outside the United States, however, is why call WiFi can be important.
Thank you very much for your advice.
Check out these two items and search for your provider and model:
http://www.Apple.com/iPhone-se/specs/
http://www.Apple.com/iPhone/LTE/#iPhone-se
http://www.Apple.com/shop/buy-iPhone/iPhone-se (FAQ section)
Are there differences between an iPhone for AT & T or T-Mobile and iPhone for Sprint or Verizon Wireless?
iPhone offers the same innovative characteristics regardless of the mobile phone service provider you choose. If you choose AT & T or T-Mobile as your mobile phone provider, your 6s, 6s iPhone iPhone, iPhone 6, iPhone 6 more or SE iPhone will use cellular technology GSM cellular technology GSM or LTE for data services and voice services. All these devices can roam internationally on several GSM carriers worldwide. See below for more details. If you choose Sprint or Verizon Wireless as your mobile provider, iPhone, iPhone 6 s 6 s, iPhone 6, iPhone 6 more or SE iPhone will use CDMA cell phone technology for voice services and cellular CDMA or LTE technology for data services. A 6s, 6s iPhone iPhone more, iPhone 6, iPhone 6 more or SE iPhone activated on Sprint or Verizon Wireless also has the ability to walk on GSM networks internationally using the SIM card provided. For more information about support of the LTE network, please visit www.apple.com/iphone/LTE.
What iPhone model number come from SIM-free?
Model A1662.
-
Hello
Here's my dilemma. I recently bought a Dell U2414 as a 2nd monitor to replace my old 2407FWP Dell (has died) with the understanding that the new monitor would work (via a DVI to mini displayport cable). I bought a high quality 3rd party DVI to mini display port cable. Obviously, the monitor does not. I can't get a direct Dell response if this will never work. My hunch is the graphics card can not simply to manage this monitor and it won't work with my system.
FYI: I also have an old DELL G2210 (resolution: 1680 x 1050 at 60 Hz) on the other DVI port. So I'll still need a DVI port.
Here are the current video card info:
ATI Radeon HD 2600 XT: VRAM (Total): 256 MB
Here is my Mac info (on 10.9.5):
Model name: Mac Pro (early 2008)
Model identifier: MacPro3, 1
Processor name: Intel Quad - Core Xeon
Processor speed: 2.8 GHz
16 GB OF RAM
Firstly: If someone can give an answer as to if the monitor works with this graphics card, just to settle this matter and move?
Second, assuming that no, my choice appears to be:
- return the screen and try to find another 24 "that will work with the original map (someone there suggestions for what is currently still deployed that would work with such an old graphics card?)
- upgrade the map so it can handle the new monitor but still run the old.
I chatted with OWC on this subject and they suggested 2 possible upgrade cards but they will not be returned since they could not guarantee that they will work with this monitor there is a risk.
Dell has been pretty useless (I have no one said yes, the other doesn't).
Here are some suggestions from OWC (see below). Can someone comment and tell me if or the other will definitely work or offer another solution? I would really appreciate it!
ATI Radeon HD 4870
https://eShop.MacSales.com/item/Apple/MB999ZMA/
Or more likely: ATI Radeon HD 5870
https://eShop.MacSales.com/item/Apple/MC743ZMA/
I know there are more expensive options (Saphire?), but I don't want to spend $500 for a graphics card on a 8 year old computer.
Thank you!
Best,
Joel
This is a screen with a displayPort, a DisplayPort outside and a Mini DisplayPort connector, in 1920 by 1080 max resolution.
You are WAY overthinking this. A mini DisplayPort to mini DisplayPort or a Mini DisplayPort to [size] DisplayPort should do all the work for about US$ 10, no conversion.
You don't need another card unless your is dead.
-
Bluetooth does not work with the hands-free after iOS 9.3.1 on 6s
Question so that evacuation here... Hello apple, invite you me several times to upgrade to the latest version of the software and I finally do after two weeks of incessant pop ups and now my phone became unusable with connection handsfree on three high-end cars (both brands of cars from 2007, 2010 and 2015 ", which confirms that it is a matter of apple). I have a 6 s and have just updated to 9.3.1. Before the update, everything was fine now, I have constant clipping making it impossible to use. This means that I can not make calls hands free which is obviously a problem in relation to the laws of conduct. I'm trying to get by using a headset or speaker of the iPhone, but it's bad news. Note people are ranting on this matter in all directions. Do you have a recommendation?
You talk to Apple by posting on this forum, only users such as you. Please provide your feedback directly to Apple at this link: http://apple.com/feedback
Maybe you are looking for
-
With the help of El Capitan OS 10.11.5 Try to upload Studio Art 4, trial version.
-
Cannot start the Satellite P300-1FN - nothing happens
Hi all I have recently reinstalled windows 7 on my Satellite P300-1FN and after a few minor problems, it was working fine.I blocked some drivers and updates, then it prompted me to restart. I turned it off and left while I had lunch, then tried to st
-
looking for software for Microsoft UAA for High Definition Audio - Adi 1986 function driver
Looking for software or download for Microsoft UAA Function Driver for High Definition Audio - Adi 1986, I don't know where the drive is now?I tried a few links, but they do not fix the problem. My driver has been removed, where can I find the driver
-
Windows 8 - which together pilots so that he can recognize a Matshita BD - CMB UJ162?
Similar to many others - Windows 8 does not recognize a reader blu-ray/dvd on my laptop. I have a Sony VAIO SVE14A3C5E and the player in question is a Matshita BD - CMB UJ162. The error message received is: "Windows cannot start this hardware device
-
I recorded a XMLschem in the Oracle XDB repository to load the XML file into the oracle tables using storage relational object. In this process, I'm trying to remove the xmlschema to sign up again with a few changes in the XSD file, but I'm not able