& lt; MX:XML & gt; updated during execution?

Similar Questions

• XML using imported during execution.

  I create an animation that will be used in 60 countries, so messages must be brought in the country.  As I understand it, using XML is the best way to do it.  So, I have created the XML file according to (number of items reduced to space) in Notepad:

  <? XML version = "1.0"? >
  < name poster = "transfer case Messages' >
  < messageNumber = message text ' click on the switch of inflammation to advance the position a switch. "="0"/ >
  < messageNumber = message text "Please use the button hold brake pedal switch in and out of Park (P)." = "1" / >
  < message text = messageNumber "speed is limited to 4-wheel drive LOW." = "2" / >
  < / displays >

  Then, I used the following code to load the XML file and verify that it loads:

  tCaseContent = new XML();
  tCaseContent.ignoreWhite = true;
  tCaseContent.load ("transfercase.xml");
  tCaseContent.onLoad = {function (success)}
  {if (Success)}
  Display.Text = "Messages have loaded successfully!";
  }
  }

  According to my back, the message load correctly.

  Then, I tried to use the following code to assign variable names to messages:

  for (i = 0; tCaseContent.firstChild.childNodes.length; i ++) {}
  message [i] = tCaseContent.firstChild.childNodes [i].attributes.message;
  }

  Unfortunately, when I try to use a variable of message I get.  I'm guessing that I'm not hitting my target in the XML file, but I don't know why.  Any help would be greatly appreciated!

  As far as I can see that you do not have a "blah1" to track, and if you did, it is still running before loading the file.  You don't want to try to treat the data loaded until after it is loaded (after the hit).  Just because you place the code later in the page does not run after that which precedes it. the code runs as fast as he can... the onLoad function wait for loading to complete, but does nothing else.

  gloom var = new Array();

  tCaseContent = new XML();
  tCaseContent.ignoreWhite = true;
  tCaseContent.load ("transfercase.xml");
  tCaseContent.onLoad = {function (success)}
  {if (Success)}
  Display.Text = "Messages have loaded successfully!";
  for (i = 0; i
  gloom [i] = tCaseContent.firstChild.childNodes [i].attributes.blah;
  trace (i + "" + blahs [i]);
  }

  trace (Blahs);
  }
  }

• VMware converter 5.5 Update 1 and target host is 5.0.0 - is a known problem observed during execution of this?

  I intend to use vmware converter 5.5 update 1 and target host is 5.0.0.

  someone can confirm if there is any known problem observed during execution, it is?

  Welcome to the community,

  According to the Matrices of the interoperability of products VMware Converter 5.5 supports ESXi 4.0 and versions later, you shouldn't have issues related to the ESXi version you are using.

  André

• Adding series to the table during execution?

  Newbie :-)
  
  I'm trying to add series to a chart during execution because the number of series to draw is variable and only determined once the XML of a HTTPService returns...
  
  My chart looks like this:
  
  < mx:PlotChart id = "mainChart" showDataTips = "true" width = "100%" height = "100%" >
  < mx:series >
  ...
  
  If I add:
  
  < mx:PlotSeries xField = "Size" yField = "CompetitorPrice" displayName = "Competitor price" / >
  
  then the data plots OK, but try to create the same AS serial does not work (nothing appears):
  
  var newSeries:PlotSeries = new PlotSeries();
  newSeries.xField = "size";
  newSeries.yField = "CompetitorPrice";
  newSeries.displayName = "SeriesAddedAtRuntime!"
  mainChart.series.push (newSeries);
  
  Debugging presents the new series added and it seems OK... but it does not appear on the graph. No errors.
  
  I tried mainChart.executeBindings (); and mainChart.validateNow (); with no chance, but I guess as to what is to be the case here, as you can probably!
  
  What Miss me something to force an update of the chart with the new series added?
  
  Thanks in advance
  
  John

  It is not displayed because the table is not aware of the change in ownership of the series. I think that to run the following steps (give an or take a few syntax errors):

  var set = mainChart.series;
  var newSeries:PlotSeries = new PlotSeries();
  ...
  Series.push (newSeries);
  mainChart.series = series;

• Edit/delete/add scene coordinates in the table during execution

  Hello world

  I managed to build table allows you to store and record the coordinates of the stage and remind to control steps. However, I need change/remove/add details of scene during execution. I also need to allow the user to directly edit the coordinate from the scene of the array. Wondering what someone knows what is the best way to do it? Or is it better to use the matrix or Cluster? Thanks in advance.

  Best regards

  Han Yen

  Han Yen wrote:

  Thanks much altenbach for all the advice. I tried to do a table 2D control. I've been playing with table in the control. However, I still can't find out how can I detect that I change the data in the table 2D with the more recent issue during execution? How can I then update my current table with the latest data?

  Well, the 2D table is updated immediately and you do not all the other tables.

  Do you mean that you want to update XAbs, etc. where the just changed line is already selected?

  In any case, here's a simple project, perhaps it will give you some ideas. I would recommend using also the tables for XYZPos, entrances etc. and the XYZabs. This simplifies the code because you reduce the number of terminals and table operations.

  Let me know if something is not clear to you.

• Graphical evolution of waveform changes during execution

  Hello

  I'm just started learning Labview graphical programming. It's so interesting that text-based programming.

  The first issue is of course acquire analyze and display. But on the screen how to change the X axis and Y, scale of the axes during execution values.

  Maybe you should b a little more clearly what kind of values you want to change. (range, offset, multiplier, etc..)

  For example, to change the interval-y, yscale user property...... minimum or maximum range. The interval-x is a little more complicated, because you're dealing with a graph, when the x offset the changes automatically the history buffer is updated.

  Of course you must also make sure to disable autoscaling, else it will be for the next update.

  You can also change the formatting of the x axis. at the moment you show zero decimal digits. Also an axis 'style' with a few values more would be better.

• During execution of the backup and maintenance on one of my computers, I noticed a folder and the file that I can't identify me...

  Original title: identity of unknown folder

  During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify.  The name of the folder is cc68f6b7a7ca948eefb018f001 and the name of the update.exe file.  The properties of the file that it is a Windows Service Pack installation.  I tried Googling the name of the folder, but found nothing.

  Can you tell me with regard to this issue, and what, if anything, I have to do?

  Thank you.

  When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

  This explains why the records are sometimes on your C drive or any other drive - the most space?

  For example, you can see a similar to or called folder:

  D:\9470bb12e8a4f3447657236478e41c5

  There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

  They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

  If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

  You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

  Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

  There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

  Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is one good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

  If you are running XP Home Edition, the following section on turn off "Simple file sharing" does not apply to you since in XP Home, Simple file sharing is always turned on.  If you are running XP Home Edition, skip the next few paragraphs and resume where it says:

  "If no part tool above work try a third popular called Unlocker.

  If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

  Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

  With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

  General, sharing, customize

  With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

  General, security, customize

  Now, try to manipulate/delete the folder.

  It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

  If none of the above works, try a popular third-party tool called Unlocker.

  Unlocker can be downloaded here:

  http://www.emptyloop.com/Unlocker/

  If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

  You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

  Unlocker can be uninstalled when you have finished using it.

  Reboot when finished to ensure that boring records are really missing.

• Rename the files in the dir folder during execution.

  Is it possible for actionscript and my request to rename a file during execution.

  for example

  TextFile.txt and rename textfile.draft (.draft extension would be accessible by my application only)

  any suggestions would be greatly appreciated.

  Dave

  Refer to the documentation of flash.filesystem.File.moveTo ().

  Also, make sure you only specify the authorization/action access_shared in the blackberry file - tablet.xml.

  Note, however, that if you really want this '.draft' file accessible only to your app, possibly you should rather make a copy in your folder of applications and only 'release' to shared folders when it is no longer a project.

• Filter the Table during execution and keep uncommitted line changes

  Hello

  I have a requirement which has been quite difficult for me so far.

  I use the first version Jdev 12 c.

  I have a table of AF that is connected to a ViewObject that is used for sending new data.

  When I add lines to this ViewObject, I put a field that I intend to use for filtering so that the number of lines is not displayed at the same time.  This field comes from a selection of LOV.

  I want to be able to change lines are displayed in the table based on what is the current value of selection LOV.  This isn't a problem for me, and it works perfectly using a view criteria and a variable transitional EO I put in place.

  My problem is that when I select a new value in the LOV and change to bind the variable view criteria, I want all changes uncommitted to the lines to be preserved in the View object.  Currently, the lines are not keep their changes, and I need to do this, because after that the user has entered data for a large number of lines, there will be a commit to the database for all new lines added.  Is this possible or should I look for an alternative?

  I also tried to use a table filter in the link of the page layer, but I get an error that I can't debug. It is marked as Houston-34014.  In this method, I try to access my bean in pageFlowScope to filter the table.  This bean variable is updated when the LOV selection changes.  Error messages settings are {0 = oracle.jbo.Key [-220-225], 1 = root}.  I also read that this filter parameter is a static filter and does not dynamically during execution.

  Any help would be appreciated, thanks for reading.

  Hello lhymel

  I think that your problem is solved, so please close this thread and open a new thread for tuning related problem

  Thank you

  -Ashish

• If Condition get spent during execution, even when the data Condition fails

  Hi gurus,

  We came back to condition in the procedure below

  
  

  / * Condition in a procedure * /.

  If i.effective_end_date > p_end_date and i.effective_start_date < = p_end_date

  then

  Start

  If l_future_rec_flag then

  -Call API with update insertion mode

  l_datetrack_mode: = hr_api.g_update_change_insert;

  on the other

  -Call API with Update Mode

  l_datetrack_mode: = hr_api.g_update;

  end if;

  -api call

  end;

  end if;

  / * Condition in a procedure * /.

  data sent to this if condition during execution is as below, I printed it using fnd_file.put_line (fnd_file.log).

  i.effective_end_date > p_end_date and i.effective_start_date < = p_end_date

  31 December 12 > 31 March 13 and 1 January 13 < = 31 March 13

  , my doubt is that the above data made it clear the if condition fails with past data. but during the execution, the condition happened and will block to start and run the api and get api error.

  Error occurred during the assignment process. Check the log file for more details. ORA-20001: unable to change the update of insert mode when there is no future lines

  Cause: The insert DateTrack change update mode can be done if there is no future lines after the current date.

  Action: Perform an update operation DateTrack or erase your changes.

  Error occurred during the assignment process. Check the log file for more details. ORA-20001: unable to change the update of insert mode when there is no future lines

  Can anyone help on this.

  Thanks in advance

  Hi gurus,

  Now, it has been resolved, we used the to_date for date comparison function and now it works perfectly.

• ORA - 06502:numeric or of value errORA-04088: error during execution of trigger

  I received the following error message by entering a number in the maximum value (i.e. 9 999 999.) allowed in a data entry form that is distinct from the basic form:
  
  ORA-06502: PL/SQL: digital or error number precision value: ORA-06512 too big: "< owner >. < trigger >", line 194 ORA-04088: error during execution of trigger '< owner >. < trigger >.
  
  Where < owner > is the schema name and < Trigger > is the name of the trigger. The block of data in the application for participation is based on a database table, and the sum of all the values entered (with a maximum value of 99.999.999.) appears in the form of Basic. A grand total of this amount along w / other totals on the basic shape is also displayed with a maximum value defined as 999 999 999. Only, I get the above error message when the total is greater than 99999999. If the total is less than or equal to 99.999.999, the basic form works very well. Why?
  
  I checked all the attributes of the database columns and form fields and everything seems to be okay, and I'm out of my mind. I desperately need your help to solve this problem quickly because the pressure is on...
  
  Thanks in advance for any help.

  Orchid says:
  Hello Hamid,

  Thanks for your help. Yes, it works as suggested, after that I have increased the length of NUMBER data base table column (9) to NUMBER (11).

  gives you the correct answer, and you don't mark it ;)

  >

  Apparently, Oracle database truncates the decimal points and only update the value of 9 digits without giving errors, but the form of Oracle application is more picky and it generates forms and Oracle error messages when you run the application. It seems that there is a difference when executing the sql commands in the Oracle database and execution of these Oracle Forms application controls. Do you agree?

  Yes

  Thanks again for all the help.

  You can only give reward for it by checking the useful and correct answer.

• Can I create multiple dynamic entries during execution?

  Can I create multiple dynamic entries during execution?
  
  Oracle 11g
  Request Express 4.0.2.00.06
  
  Here's my problem:
  We have a table that contains metadata about the files (paper or electronic).
  We hope that we can need more columns in the table at some point and do not want to change the table or the application.
  
  So to do this I would like to create:
  
  A table called TBL_FILE with columns:
  NUMBER of TBL_FILE_ID (this will be the primary key)
  TBL_FILE_NAME VARCHAR2 (1000) (this will be the name of the file)
  
  A second table will be called TBL_FILE_META with columns:
  NUMBER of TBL_META_ID (this will be the primary key)
  NUMBER of TBL_FILE_ID (this will be the key to forign to the files table)
  TBL_META_COLUMN VARCHAR2 (30) (this is what would be the name of the column if it existed in TBL_FILE)
  TBL_META_VALUE VARCHAR2 (1000) (this is the value of this record and the column "would be")
  
  If a person can have as many meta data in the file to add columns to the table.
  The problem is how can I allow users to add as much data as they wish with them having to re develop page.
  
  Other things to note is that we would like this be on one page.
  I know how to add we can create inserts several rows using a SQL (editable report).
  However the TBL_META_VALUE in the TBL_FILE_META column will sometimes be a selection list and other times one text box or a numeric field.
  So I don't see now a SQL (editable report) would work for this and I can't create a table of elements on the page running I can?
  
  No idea how I might accomplish this? Is there a better way to do this?
  
  It is a term or a name for what I'm doing by creating these "virtual" columns in another table?
  I found this method looking at the workflow tables Oracles.

  Welcome to the Oracle Forums!
  >
  Can I create multiple dynamic entries during execution?

  Oracle 11g
  Request Express 4.0.2.00.06

  Here's my problem:
  We have a table that contains metadata about the files (paper or electronic).
  We hope that we can need more columns in the table at some point and do not want to change the table or the application.

  So to do this I would like to create:

  A table called TBL_FILE with columns:
  NUMBER of TBL_FILE_ID (this will be the primary key)
  TBL_FILE_NAME VARCHAR2 (1000) (this will be the name of the file)

  A second table will be called TBL_FILE_META with columns:
  NUMBER of TBL_META_ID (this will be the primary key)
  NUMBER of TBL_FILE_ID (this will be the key to forign to the files table)
  TBL_META_COLUMN VARCHAR2 (30) (this is what would be the name of the column if it existed in TBL_FILE)
  TBL_META_VALUE VARCHAR2 (1000) (this is the value of this record and the column "would be")

  If a person can have as many meta data in the file to add columns to the table.
  The problem is how can I allow users to add as much data as they wish with them having to re develop page.
  >
  Creation of dynamic Page elements is not available. You must create surplus items and hide/show, etc. But you cannot change the element Type. Overall, too many restrictions in this approach.
  >
  Other things to note is that we would like this be on one page.
  >
  The limit of 100 points will hit you if you go with extra page element. With the form of tables that should not be a limitation, unless you're exceeding the limit of 50 APEX_APPLICATION point. G_Fnn points and limitation of the 60 column of the region report with "(analyze the query executing only) use generic name column" in the dynamic region.
  >
  I know how to add we can create inserts several rows using a SQL (editable report).
  However the TBL_META_VALUE in the TBL_FILE_META column will sometimes be a selection list and other times one text box or a numeric field.
  >
  If the type if the item is variable, that doesn't mean that you have to type a way to store the item. Metadata of meta data.
  >
  So I don't see now a SQL (editable report) would work for this and I can't create a table of elements on the page running I can?
  >
  Yes, you can do it. Update report / query in a table can be built from the metadata using the SQL query that returns the PL/SQL function . It will be a bit of coding in PL/SQL where you use metadata and metadata of Meta data to restore your SELECTION with the right APEX_ITEMs. He might have a decrease in performance associated with it, but it will not be a serious degradation.
  >
  No idea how I might accomplish this? Is there a better way to do this?

  It is a term or a name for what I'm doing by creating these "virtual" columns in another table?
  I found this method looking at the workflow tables Oracles.
  >
  I guess it's just a good TNF. This is the master model / retail Design, sounding more modern? ;)

  Kind regards

• Deactivation of BPEL/BAM surveillance during execution

  Hello
  It is possible to disable/enable the built-in BPEL monitors to BAM (which uses the Express data objects of the monitor) during execution? I've not found properties or mbeans that can be changed in the MS for that. My other thought was to try to change a property/preference on the BPEL component via the composite.xml file. However, any changes made to the property "configuration.monitorLocation" through the EM does not get picked up. In addition, I was going to try to change the property 'enableProcessSensors' referenced in the Guide of the developer of the SOA (11.1.1.4 - section 50.3.3), but the property is never set in the composite.xml file as it says in the guide. I've tried turning on and off of the monitoring through the box several times as suggested by the guide (and recording in between), but the property is never created in the composite. Please let me know how manually set this property if it is indeed available.
  Please let me know if the disable/enable is available during execution.
  Thank you
  Ben

  Hi Ben,

  If you go to the SOA Composite in the EM there's a button called settings where you can choose to toggle monitors and sensors BPEL runtime.

  See if it helps.

  Published by: Arun Perron 7 Sep 2011 09:35

• Error during execution of the event handler

  Hello
  
  I've implemented a before update event handler (made sure the name is true, the package is right, file loaded on the server, the java code compiled in jdeveloper) but had this error during execution. -What this means and how can I solve this problem?
  
  Thank you
  
  ERROR, 4 June 2009 17:25:32, 701, [XELLERATE. SERVER], class/method: tcDataObj/eventPreUpdate some problems: Event handler com.oracle.events.UcdCheckAndSetSponUserExpDate has no name assignedjava.lang.RuntimeException: Event handler com.oracle.events.UcdCheckAndSetSponUserExpDate has no name assigned
  at com.thortech.xl.client.events.tcBaseEvent.run (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.runEvent (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.eventPreUpdate (unknown Source)
  at com.thortech.xl.dataobj.tcUSR.eventPreUpdate (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.update (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.save (unknown Source)
  at com.thortech.xl.dataobj.tcTableDataObj.save (unknown Source)
  at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData (unknown Source)

  In your constructor did you set the name of the event handler?

  Something like:

  setEventName("Enter-a-name-here");

  Best regards
  / Martin

• masking steps during execution

  I have a sous-suite that I point the user to when asked to isolate a card failure.  To give them some flexibility, I got a popup that gives them a certain number of options (see attachment).  I have an m.o. that indicates the individual steps these select/run (i.e. '1' or '3' in the png).  Control flow (denoted by '2') is the noise they don't really need to worry and may / will cause confusion (and possibly problems for me if they select them accidentally).  Is there a way to hide these measures flow during execution control so that the user sees '1' and '2' (and other similar 'valid' selections?

  If there wasn't a need explicit to have the flow control logic, then I'd be tempted to compact all in the post of the Popup Message action.

  

  By setting the Popup Message Action to go to the step, , use Custom Condition (TRUE):

  

  And by using the following Expression:

  Step.Result.ButtonHit == 1? RunState.Sequence.Main ["MR_RPack_R55"]. UniqueStepId:
  
  Step.Result.ButtonHit == 2? "" "RunState.Sequence.Main ["End_PCI_Isolation"]." UniqueStepId:
  
  Step.Result.ButtonHit is 3? RunState.Sequence.Main ["MR_R103"]. UniqueStepId:
  
  Step.Result.ButtonHit is 4? "" "RunState.Sequence.Main ["PCI_Intf_PT"]." UniqueStepId: «»

  It should be appropriate level following the Popup Message.

  (SequenceFile attached).

  I hope this helps.

  Charlie