VMware converter 5.5 Update 1 and target host is 5.0.0 - is a known problem observed during execution of this?

Similar Questions

• Hi, I recently bought an iPhone 5s. Now, according to the sources, the new "5se" would probably replace the ' 5s ' in the near future. I'm afraid that I won't get it more updated and after sales support for my 5 seconds (if any problem is found). Is this

  Hi, I recently bought an iPhone 5s. Now, according to the sources, the new "5se" would probably replace the ' 5s ' in the near future. I'm afraid that I won't get it more updated and after sales support for my 5 seconds (if any problem is found). Is this possible? Apple will provide an upgrade for free or minimum package 5se 5 seconds it's users?

  The terms of the terms of USE on this forum we cannot speculate on what Apple may or may not do. That being said, there is no priority for what you ask. There is no way of knowing how long your device will be able to continue to upgrade to new versions of iOS. As long as he is able to run the new versions of iOS, it is fully supported. This is the level of iOS, not the hardware that is important here.

  See you soon,.

  GB

• 4.1 - > 4.1 U1: vCenter update first and ESXi hosts later?

  Hello

  About the update 4.1 4.1 U1, y at - it order to follow?

  1 vSphere client

  2 vCenter & update manager

  3 ESXi hosts

  Thank you.

  It is always advisable to update vCenter Server before upgrading anything else.

  1 vCenter Server

  2. Update Manager

  3. the Client vSphere + new Update Manager Plugin

  4. the host ESX (i)

  André

• VMware Converter 4.3.0 - build292238 fails to convert the WSvr2K3 - failed with MethodFault::Exception: converter.fault.CloneFaul

  I managed to convert this WSvr2K3 with an earlier version of VMware Converter (version unknown - disappeared today and didn't is more free to download).  Now with VMware Converter 4.3, I made 6 attempts, and they fail to 19%. ESXi 4.0 host and the original client OS is WinXP.

  Here's what I see in the papers...

  VMware-converter-worker - 11.log:

  [#10] [2011-06-14 08:34:28.893 02780 WARNING "App"] [, 0] [NFC ERROR] NfcNet_Send: 272 requested, only 9 bytes sent
  [#10] [2011-06-14 08:34:28.893 02780 WARNING "App"] [, 0] [NFC ERROR] NfcFileSendMessage: hdr send failed:
  [#10] [2011-06-14 08:34:28.893 02780 WARNING "App"] [, 0] [NFC ERROR] Network error - could not send header message
  [#10] [2011-06-14 08:34:28.893 02780 error "task-10'"] Sysimgbase_Nfc_PutFile failed in H2MDiskCloneMgr with nfcError 3
  [#10] [2011-06-14 08:34:28.893 02780 error "task-10' '] before sesison farm...
  [#10] [2011-06-14 08:34:38.675 02780 error "task-10' '] hosted the managed disk clone failed: Sysimgbase_Nfc_PutFile failed
  [#10] [2011-06-14 08:34:38.675 02780 error "task-10'"] Clone disk failed with error clone Sysimgbase_Nfc_PutFile failed
  [#10] [2011-06-14 08:34:38.675 02780 error "task-10'"] TaskImpl failed with MethodFault::Exception: converter.fault.CloneFault
  [#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] SingleDiskCloneTask [ward-Windows Server 2003 edition Enterprise x 64] host\Shared - \\vmware - Folders\VMwareSharedFolder\vmware_convert\ward-Windows Server 2003 Enterprise Edition x 64 Edition\WindowsServer2003EnterpriseX64Edition - cl1.vmdk--> [ward-Windows Server 2003 Enterprise edition x 64]-[datastore1] ward-Windows Server 2003 Enterpr / ward - Windows Server 2003 Enterpr.vmdk updates, States: 4, percentage: 19, xfer rate (bps): 3043327
  [#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] DiskBasedCloneTask ward-Windows Server 2003 Enterprise edition x 64-> ward-Windows Server 2003 Enterprise edition x 64 updates, States: percentage, 4:19, xfer rate (bps): 3043327
  [#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] CloneTask updates, States: percentage, 4:19, xfer rate (bps): 3043327
  [#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] CloneTask failed
  [#10] [2011-06-14 08:34:38.675 02780 error "App"] Task failed:
  [#10] [2011-06-14 08:34:39.893 02780 info "task-10'"] Programmed timer cancelled, succeeds StopKeepAlive
  [#10] [2011-06-14 08:34:39.987 02780 info ' vmomi.soapStub [49]'] Reset Adapter stub server TCP:192.168.0.21:443: closed
  [#10] [2011-06-14 08:34:39.987 02780 info "App"] Completed task: the task-10
  [#10] [2011-06-14 08:34:39.987 01788 info "task-9'"] CloneTask updates, State worker: percentage, 4:19, xfer rate (bps): 3042304
  [#10] [2011-06-14 08:34:39.987 01788 info "task-9'"] TargetVmManagerImpl::DeleteVM
  [#10] [2011-06-14 08:34:39.987 01788 info "task-9'"] Reuse the existing connection of VIM to 192.168.0.21
  [#10] [2011-06-14 08:34:40.112 01788 info "task-9'"] Destruction of vim. VirtualMachine:480 on 192.168.0.21
  [#10] [2011-06-14 08:35:13.331 01788 error "App"] Task failed:
  [#10] [2011-06-14 08:35:13.331 01788 info "task-9'"] Programmed timer cancelled, succeeds StopKeepAlive
  [#10] [2011-06-14 08:35:14.940 01788 info ' vmomi.soapStub [48]'] Reset Adapter stub server TCP:192.168.0.21:443: closed
  [#10] [2011-06-14 08:35:14.940 01788 info "App"] Task completed: action-9
  [#10] [2011-06-14 08:35:14.987 02340 info "App"] [Converter.Worker.DiagnosticManagerImpl] [Task-9] Production job log bundle.

  VMware-server-converter - 11.log:

  [2011-06-14 08:35:14.956 01512 error "App"] [task, 344] [LRO] Unexpected exception: converter.fault.CloneFault
  [2011-06-14 08:35:14.956 01512 info "App"] [task, 373] [task-6] - ERROR - convert: converter.fault.CloneFault
  {(converter.fault.CloneFault)
  dynamicType = < unset >
  faultCause = (vmodl. NULL in MethodFault),
  Description = "Sysimgbase_Nfc_PutFile failed", he said.
  MSG = ""
  }
  [2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 260] TaskInfo recovered to "converter.task.Task:task - 6" mapping to "converter.task.Task:task - 6".»»»
  [2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 300] The task with id = 'task-6' turned out to be a task 'recent '.
  [2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 314] No group of existing log not found for task with id = "task-6. The task is still 'young' so a bundle of newspapers going now is assigned.
  [2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 756] Recovery of the related tasks of diagnosis for the tasks of server with id = "task-6. ^
  [2011-06-14 08:35:15.237 02212 info "App"] Suspended 1 elements of Planner for employment (job-39) - Sub __thiscallConverter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,classConverter::VdbConnection_&) ("d:/build/ob/bora-292238/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:823")

  Of course I would appreciate some suggestions.  Is the MethodFault::Exception: converter.fault.CloneFault the problem?  And if so what does that mean?

  Do not use shared folders to access the virtual machine.

  Use a drive letter - or
  just start the virtual machine and use the remote clone function

• Upgrade VMware ESXi 6.0 Update 2 VMware ESXi 6.0

  Hello I am running my PowerEdge T110 II with VMware ESXi 6.0 - Dell customized image. I see that from April 15, 2016 Dell just introduced VMware ESXi 6.0 Update 2 and I'd like to update my system.

  On the download page , I see there is an option to download and the ISO file. I wonder if this installation will completely be wipeout my existing VMware ESXi 6.0 - Dell custom and all the settings and I have to start all over again or update 2 ISO just 'modernize' my network?

  Hello

  You can use it to update without doing a new install. KB.VMware.com/.../Search.do; cmd = displayKC & externalId = 2109711 #Inter

• Clonar office en caliente between different esxi Máquinas con vmware converter

  Estoy trabajando con currently varios servidores Vmware ESXi 4.0 Update 1. Estoy utilizando VMWARE CONVERTER version 4.01 para clonar las maquinas office of United Nations (local) UN esxi datastore has otro datastore otro esxi (local). In brief espero recibir una cabina discos y versiones con vmware HA, VMOTION, etc... El problema are real as debo thank office conversion realize antes las maquinas y aun parandolas, soon mucho tiempo. If conversion of uno of fisico servidores una a virtual late 2 horas, nueva Máquina virtual driving ahora y clonada mediante vmware converter a otro esxi soon approximately 8 horas. Alguien tiene the respond a mi problema? Me interesaria sober todo no thank the Máquina y saber if hay algun otro clonado procedure para delays menos tiempo.

  A saludo thanks!

  Hola,

  UNA opcion posible what me compares (tema obviando converter) that you do UN snapshoot temporal (depende del tipo mv hay than tener cuidado) y despues ' con calmed her "mueves (for example using fastscp/winscp) el fichero .vmx config y el hard store of data/esxi.

  UNA vez take her copia borras el snapshoot en el origen.

  There is!

  Been este are a process of copia y not clonado. Pero possible than also you sirva.

  Best wishes / Saludos.
  Pablo

  Please consider awarding

  all useful or correct answer. Thank you!! -

  Por favor considered premiar

  any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog

• P2V Windows file server migration (VMware Converter 4)

  We use VMWare ESX 3.5.

  We want to migrate a physical file of MS Windows Server VMWare (ESX 3.5). The physical server has a C: drive of 40 GB and a 300 GB D: drive

  We would like to use VMWare converter, to migrate the server and to develop the drive C: for the virtual server is 80 GB, however we are concerned the 300 GB d: partition since it will take some time, and while the P2V, we might have some users access to stocks (on server co-location) and modifiyng files during migration.  So, if this caught there is a potential risk of losing business data.

  I learned that the VMWare Converter 4 can do a live migration and once completed the P2V it can track changes and then synchronizes them when you turn off the physical system.

  I was wondering if someone knows about this type of functionality on 4 VMConverter and knows how to use it?

  You can resize the disks so that the migration using VMWare converter. It is not only to take care on the disk, it is resized the partition, also.

  AWo
  VCP / VMware vEXPERT 2009

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Upgrade to VMware Converter

  I am a registered product VMware Converter 3.0.3 user and I would like to upgrade the VMware vCenter Converter Standalone 4.0.1 product

  Question:

  I can simply install Converter Standalone 4.0.1 on the existing Converter 3.0.3 or should it be uninstalled manually?

  Thanks for the tips.

  You can install over your existing version.

• VMWare converter on a domain controller that you want to resize partitions?

  Hello

  I read that you are not supposed to use VMWare converter on domain controllers because the domain controller is very sensitive to changes in material ranging from physical to virtual material involved.

  In fact, I have a few DCs 2003 (virtual) Server I want to upgrade to 2008 (also virtual) DCs, but they need more disk space.  I want to use VMWare converter to increase the disk size to allow the extra space taken up by Server 2008, but I wonder if this will not work because the VMWare converter does not like domain controllers.

  Is it still the concern to use VMWare Converter to "convert" essentially a virtual machine to another virtual machine that has more disk space on the partition of the OS?  I'll have to rebuild every fresh as Server Server 2008 domain controller and then transfer the roles via?

  Thank you.

  You don't need to run the converter... stop the 2003 domain controller.  Change the virtual machine to increase the size of the disk.  Fix the VMDK on a different VM like saying 'F drive '.  It boot up... run diskpart and extend drive "F".  Shutdown... Remove the extended DC drive of the virtual machine.  Then put on the DC... here's no wobbly thing done to the domain controller.

  All this should not take more than 3 minutes and no need to enter the command line (ok, other than the 2 lines of diskpart on BACK).

• Download the VMware converter integrated software (plug-in to vCenter)?

  Can someone help me with this? We have not bought the upgrade license vSphere 4.

  Where can I download Vmware converter software integrated (plug-in to vCenter)? Is it comes with Vsphere 4 bundle? I couldn't find this as a bundle of Vsphere 4.0 evaluation.

  Thank you

  the installation of plugin files will be located on the vCenter Server .iso file.  Inside the .iso file, there will be a file converter.    However, if you are not running vCenter 4 you maybe better off using the stand-alone version.

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vcenter_converter_standalone/4_0

• update a single ESXi host

  I have a recovery with a host site (run by a unit of vCenter and windows PSC) which is the site of recovery in a SRM deployment, and it also runs an AD domain controller and replication of vSphere. In addition, of course potentially VMs that can be recovered.

  But - I do not know how I will apply the updates to this host? I have no physical box outside the host ESXi itself. I have a VPN to connect with a laptop computer remotely or whatever.

  What is the best way to update this host? Things are complicated a bit also because the host has a HP async SAS controller driver (thus, the appropriate driver is NOT included in the usual VMware update packages). In a cluster of stream environment, it's simple, of course - add in a CVS repository, create a baseline that includes the drivers updated to HP, and then set the host mode maint and clean up. Maybe do it twice to catch the updated HP drivers.

  But - how the hell is this fact without Update Manager and another host?

  If you have any kind of IPMI (ILO since it's HP) draw a HP brand ESXi ISO in there and update that way. After that, you can download kits locally using SSH or the browser to store data and run the beams offline against the host.

  https://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2008939

  If this post was helpful, please mark it as such.

• Isolate the vCenter and management host ESXi5.1 of LAN traffic

  I would add two Dell switches to an existing installation, create a private management network (192.168.x.x subnet) containing the hosts and vCenter server, so that the management traffic is isolated and in no way dependent on connectivity LAN... for now that the vCenter server and the hosts are on the local network using public IP addresses.

  Is this possible with vCenter as vCenter that one IP can be configured and how should we switch be configured to allow access to vCenter from the local network via the web and customer management interface vSphere.

  Thank you very much

  Gary

  Facing your audience of LAN?  I think it depends a little bit of what looks like your LAN.  I don't think - you need not NAT your management network.  If you simply use public IPs rather than private to your internal LAN, the answer is no.  I have a client who does this same thing using 191.x.x.x for its internal network.  You try to access your network over the Internet?  It would be a different matter, and I recommend that to consult a competent network engineer.

  In short, just because you go to a public IP address range a private range of IP addresses does not mean you need to NAT.  You see NAT several times when these IP address ranges are used because they are intended.  For example, a company has a single public IP address assigned.  It uses private in its local network IP addresses.  For devices that must leave the LAN and access the Internet, you would NAT because everyone has to share this single public IP.

  Without knowing a little more, I think you'd be fine with the standard range or switching (inter - VLAN routing layer 3).

  All the best,

  Mike

  -----------------------------------------

  Remember to mark this reply 'proper' or 'useful', if you found it useful.

  Mike Brown

  NetApp, VMware and Cisco data center guy

  Consultant engineer

  [email protected]

  Twitter: @VirtuallyMikeB

  Blog: http://VirtuallyMikeBrown.com

  LinkedIn: http://LinkedIn.com/in/michaelbbrown

• VMware Converter Standalone copy is the copy block level and sometimes at the level of files

  Hi team,

  I use VMware converter standalone for P2V and V2V migrations. I noticed that some readers are cloned by the converter by block-level copying and some readers are colned by the file-level copy. Anyone can unmask me why is it so? Block level and file level methodology is decided by the converter on what basis? is the size of the size\sector disc or disc type? Any suggestion will be highly appreciated.

  Thanks in advance

  Kind regards

  Rohit

  Screen enclosed... Post edited by: RohitGoel

  RohitGoel wrote:

  Is there a limit of resizing who decide if vmware converter will use the file level cloning. I have attacehd a screen shot... I'm resizing it had ' (from 50 GB to 80 GB) drive also for traget VM but yet Vmware converter used method block based to clone and 'E' is also a resized to target disk is converted by file based cloning. .. is there something else that decides on the level of the file or block level when it resizes?

  No limit of resizing.

  To resize the D: you extend that will always use at the block level.

  What do you do to E:?  Size reduction?

• VMware Converter 4.0 and Virtual Server 2005 R2 VM

  I downloaded the new VMware Converter (Version 4.0.0) because he had promised for the merger as a target.

  I have the image of Sharepoint 2007 VIrtual demonstration of Microsoft Server which works OK using Virtual Server.

  The converter seems to be a valid VMware image on the PC where I run the converter.

  I copy the VMware HD image created on my external Mac (OS X 10.5.6 Fusion 2.0.1) and merge it opens but there are questions.

  1 fusion think that the virtual machine is an 'other' OS rather than Microsoft Server 2003 Enterprise, which is what the VM from virtual server. Therefore, I can not install VMware tools on the virtual computer.

  2. If I change the type of operating system in the interface of Fusion Server 2003 Enterprise settings and that seems ok. Then, I am able to install tools in VMware Fusion.

  3. after the required reboot to complete the installation of the tools, the VM comes back BUT the mouse pointer is no longer visible. The virtual machine makes it unusable at this point.

  I remember posting on this forum awhile at the time where I realized first that the virtual server instance could be opened with a PC version of the workstation and I remember reading while the mouse pointer is a problem.

  So is there anything, I can do to get the Fusion tools installed AND have a working mouse pointer?

  Any help appreciated.

  Jim

  Yes, it is removed from the control panel and you can try on virtual machine converted however, it may not work.  As before you convert you can do anyway that you presented.  I like to make a copy and use it as I want to do some other preprocessing and then I just remove it when I'm done leaving the original intact, but whatever way works for you is fine.

• VMware Converter 4.0 and 5.0 downloads

  I believe that in order to download the 5.5.3 or 6.0 VMware Converter. I have a 2003 SP1 server to convert, and if I read correctly the documentation, to support the most recent version is 4.0.

  I could install 2003 SP2, which means I could use Converter 5.0, but I'm not either of these versions of converter for download. They were abducted by VMware? If so, suggestions on how to proceed would be appreciated.

  Thank you

  To be a little more specific - SP1 is not officially supported, but the code that performs the conversion is the same regardless of the level of MS.