LVOOP: summon screws (data) class reference member. alternatives for "in place"?

Similar Questions

• Can I use data value references with a functional overall?

  Can I use data value references with a functional global?  I am trying, but it causes problems:  I run the attached VI with "new DVR" selected.  Then I run it again with "return array" and I get the error 1556: "The reference is invalid. This error might occur because the reference has been deleted."  It seems to have forgotten the DVR, but I thought it should be stored in the shift register.
  
  Another odd thing:  In my VI, if I try to connect the wire shown in "something strange", then the type changes (from U16 array to DBL), i.e. it doesn't recognize the type referenced by the DVR.
  
  I want to pass a very large 4-dimensional array between parallel loops with a functional global.  To avoid memory problems, I want to use a DVR and in-place element structures.  If that's not allowed in Labview, I will try passing it through a user event or notifier.  Any problems with those alternatives?
  
  Thanks.
  

  I received a response from an engineer applications OR on this subject, and it seems that it is perhaps a problem with Labview.  They are working on it, so I'll go ahead and close this discussion.

  Thanks for the help,

  Allan

• Using 'New data value reference' in a loop

  Hi all

  I just read on the data value references (DVR?) and I'm trying to use them with overall functional (see table).

  I don't think that I'm just doing.  The final goal is a producer/consumer nickname.  My concern is that I don't feel the implementation of the new primitive data value reference and re-stuffing the result in the FGV, should occur in each loop.

  Of course I could "spread" data with a single gueue element (where the queue of new data would take place each loop).  I just thought that I would play with them.

  

  Beavercreek wrote:

  I think that we defend the same point, but I can't seem to understand why this does not work the way I expected.  I discovered the DVR (and queues) as a pointer, simply a way that the other vi can know where the data is located.  The data that we are after is here.  So, why Ch1 does not work in the data_reader.vi?

  If we can get Ch1 to work data_reader without re-creating and re-writing of the reference in the FGV each pole (what does Ch2), we find no more what is wrong with my vI or I'm going to learn something that is still beyond me.  I hope to hit me in the head this afternoon still

  You are missing a fundamental idea: the function you call creates a reference that points to a specific value. To actually interact with this value (read/write), you need to use the structure of the International preliminary examination. At this time what you are creating a single reference for ch1 (which do you nothing with) and creation of multiple references to ch2 (where at each iteration that you replace the reference in the FGV, so you basically lose the old reference), so instead of having two DVRs, you really N + 1 DVR (where N is the number of iterations of the loop runs).

  For your code works the way you want, you only need to create two digital video recorders (probably before the loop), then bring them inside the loop and use the structure of the International preliminary examination with nodes in R/W DVR to set the value in the DVR.

  For example:

  

  Other problems with the code, but this deal the DVR issue.

• Passing an object of the UiApplication class reference

  Hi all

  I am very new to the development of BB and have struggled for hours on something that I think should be very simple. What I have, this is the main class that extends UiApplication and a second class that implements Runnable. From a method in the UiApplication class, I create an instance of the Runnable class. After that, I call a method to start from this class and pass an object originally from the UiApplication class reference - so that I can call a method, once completed the processing of the Runnable class.

  The problem I have, is that once past the object through a call to method reference, the reference instantly cancels and causes a NullPointer exception when trying to call a method in the original class. The structure is as below, but with all the surrounding code subscribed:

  public class MainApp extends UiApplication {
  
      MainApp _MainApp;
      OtherClass _OtherClass;
  
      public static void main(String[] args) {
      MainApp _MainApp = new MainApp();
      _MainApp.enterEventDispatcher();
      }
  
      private void createOtherClass() {
          _OtherClass = new OtherClass();
          _OtherClass.someMethod(_MainApp);
      }
  
      public void response() {
          // code here
      }
  }
  
  public class OtherClass implements Runnable {
  
      MainApp _MainApp;
  
      public void someMethod(MainApp MainAppRef) {
          _MainApp = MainAppRef;
          // _MainApp object reference is null here
  
          new Thread(this).run();
      }
  
      public void run() {
          // stuff here
          // once done, call a different method
          sendDetailsBack();
      }
  
      public void sendDetailsBack() {
          _MainApp.response(); // causes a NullPointerException
      }
  }
  

  I rewrote this to only show the code at the source of the problem. I don't quite understand why the object reference is not passed correctly - I have tried many other ways to call back to the UiApplication function, including static calls.

  Any help on how I do it is very appreciated!

  Will be

  I suspect that your problem is here:

  MainApp _MainApp = new MainApp();

  I think you meant just

  _MainApp = new MainApp();

• How can I request the same information in the fields of specific metadata across multiple files, i.e. date of reference, artist, genre, composer, technician

  How can I request the same information in the fields of specific metadata across multiple files, i.e. date of reference, artist, genre, composer, technician.  Most of the fields I want to fill/use will be the same for files of 50-100, then each file will have a few things specific to that individual file.

  Unfortunately, it cannot be done from within hearing. Adobe Bridge is probably the software you need to do this or there are a few applications available third-party metadata. I use metadata Touch.

  MetadataTouch - powerful multiformat metadata editor

• Link between classes: reference error

  Hello

  I am yet to try to create a movie clip to a list of objects appear on the scene and ask the user to interact with them.

  It will be my class of loop of game called "LetterArray()".

  My main class is called 'BugGoopFSGame() '.

  After that I added the line of code below in my LetterArray(). in the class file, I get the below error message:

  Code is entered:

  private var lettersL1:Array = new Array (a, f, g, h, i, n, o, s, t);

  It comes to getting the error message:

  ReferenceError: Error #1069: property [object T] not found on S and there is no default value.

  at LetterArray()

  at BugGoopFSGame()

  I do not know the reference I use between the two files are not good. Can you please tell me what code I need to add and where.

  Thanks for your help!

  Images of recommended

  This is the code in my main class - BugGoopFSGame()

  package

  {

  import flash.display. *;

  import flash.utils.Timer;

  import flash.events. *;

  import flash.events.MouseEvent;

  import flash.media.Sound;

  import flash.events.Event;

  import flash.media.SoundChannel;

  import flash.media.SoundMixer;

  import flash.media.SoundTransform;

  import flash.text. *;

  import flash.net.URLRequest;

  SerializableAttribute public class BugGoopFSGame extends MovieClip

  {

  public var mybackground:BackGround;

  public var letterArray:LetterArray = new LetterArray (internship); / / This, this is how I connect principal to gameloop

  It is of the early in my gameloop class - LetterArray()

  package

  {

  import flash.display. *;

  import flash.events. *;

  import flash.text. *;

  import flash.utils.Timer;

  import flash.media.Sound;

  import flash.media.SoundChannel;

  import flash.net.URLRequest;

  SerializableAttribute public class extends MovieClip LetterArray

  {

  private var _stage:Stage; //this reference works well for the main file. Should I somehow a link to code mechanically below?

  / * Movie clips that need to go in a table * /.

  level 1

  public var a: A = new A();

  public var f: F = new F();

  public var g:G = new G();

  public var h:H = new H();

  public var I: I = new I();

  public var n: n = new N();

  public var o: O = new O();

  public var changement = new foo();

  public var t:T = new T();

  private var letterArray:Array;

  private var lettersL1:Array = new Array (a, f, g, h, i, n, o, s, t); //this is the line causing the error. I don't know it's because I need to add something to the main class.

  This loop must be in a function body.  for example, use:

  package

  {

  import flash.display. *;

  import flash.events. *;

  import flash.text. *;

  import flash.utils.Timer;

  import flash.utils.getDefinitionByName;

  import flash.media.Sound;

  import flash.media.SoundChannel;

  import flash.net.URLRequest;

  SerializableAttribute public class extends MovieClip LetterArray

  {

  private var lettersL1:Array = new Array [A, F, G, H, I, N, O, S, T]. Here are the video clips, for which classes were created dynamically by Flash

  public void LetterArray {}

  for (var i: int = 0; i //Line 21 )

  {

  var:Class=Class(getDefinitionByName(lettersL1[i])) C;

  var c: * = new C(); create instances of classes in lettersL1

  do everything with c

  }

  }

  }

• Prepare for the new guard cert (1z1-066) data, which is best book for study of data protection?

  Hello

  I've already planned some 1z1-066 exam on the last possible day in September.

  Now, I need to start reading.

  I had once a class of oracle Data Guard like 8 years ago.

  Can someone recommend which is considered to be the best titles of book for the protection of the data.

  Thank you Roger

  I did some quick research for DG books.  There is not a lot to choose from and none of the 12 c yet.  I haven't started on my details page of Oracle Certification Prep exam for 066, so my research on this issue is minimal at best.  That said, the only books I've seen which were reasonable in all were Oracle Data Guard 11 g manual press of Oracle and Oracle Data Guard 11 GR 2 management beginner's Guide by Packt Publishing.  I have not read the books or studied the contents of a.  A warning for me on the Packt flag is that all the of the positive comments on the book seem drawn by the hair.  I've seen this before on other books from this Publisher.  They seem to have a handful of people who write glowing reviews of 5 stars from Packt books within a very short time from the date of publication. This seems misleading just for me. The press review of the Oracle by contract has several times the number of comments on a wide range of dates, and they are almost always positive.

  That said, I would like to reiterate - I have not checked the content of a.  Before I add books that do not specifically reference a review for "Third-party resources" pages on my site, I compare the Table of contents for the purposes of test to see if there is a reasonable correspondence on the matter.

  I'll try to at least a start on a details page for 066 in the coming weeks.  I'm in deep writing at the moment, but I should be able to take a break to search for documentation and articles and whitepapers for Data Guard.

• Incomplete reference of connection for the scott connection object

  Hello
  
  my application works fine in JDev 11.1.2.1 when deployed to integrated WS
  at the same time to the stand-alone deployment, I see an error:
  Incomplete reference of connection for the scott connection object
  Houston-26061 something wrong with JDBC
  
  the connection that Scott is defined as a data source
  where can be a problem?

  John is right. Configure the jdbc data source in wls and reference him module of your application configuration.
  If you look at the example of my blog and check the configuration, you will see that I have to refer to as "jdbc/DDH" jdbc data source My WLS I put in place since a data source with exactly this pointing to the BD JNDI name I want.

  Timo

• My iCloud data drive is too big for my Macbook Air 128

  I have an iMac with all my data synchronized with iCloud drive for all my devices, but just got a new Macbook Air with a 128 GB drive... and my iCloud data does not fit on my Air...

  How to manage what I want to be in sync to iCloud for my Air?

  I did that for years w / Dropbox or Google Drive, as part of "selective sync".

  THX

  Denis

  It will be easier with the next modernization of the system.  macOS Sierra will allow you to store your desktop and Documents folder on iCloud and download only a subset of your documents, if you have enabled "Optimize storage", see this link: Preview - Apple macOS

  Until you can upgrade to the new system, I disable iCloud Drive on your new Mac and access only iCloud by car via the web interface at www.icloud.com or remove many documents as possible to iCloud, so it fits on your Mac as a reader.

• What is the date of end of support for Firefox version 19?

  I wish to confirm the date of end of support for version 19, February 2013?

  Security updates support ends when the next version of Firefox is released, so while Firefox 20 was released 6 weeks ago and 21 Firefox will be available Tuesday, May 14, that means that Firefox 19 is is no longer officially supported.

  I see that you are still running Firefox 17.

  Is there a special reason why you don't have not updated to the current version?

  The version of Firefox Firefox 17 that you are currently running is no longer compatible with security updates

  Please upgrade to the latest version of Firefox 20.0.x.

  • Help > about Firefox
  • https://support.Mozilla.org/KB/update-Firefox-latest-version
  • https://support.Mozilla.org/KB/updating+Firefox

• Quick way to copy all the data to Ipad Air 2 for Ipad Pro

  I would like to copy all the data on my Ipad 2 for the new Ipad Pro Air I just bought to avoid Delisle in downloading applications.

  Hello

  You'll be happy to learn that it is a very easy process!

  This should help:

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

  Let me know how you go!

  All the best.

• Data types in the design for the producer consumer model

  Is it possible for me to use any type of data in a model of design producer consumer, without specifying specific data type?

  what I mean is if there is a way to connect to a data type with which I can use any other type of data, not to mention that one that I have connected, and if not, how can I specify the data type for a number or any other data type, for use in a design of producer-consumer model?

  You can make a part of your cluster of data a Variant.  It will take any type of data.  A common architecture for the producer/consumer is a cluster which is an enum and a Variant.  The enum contains all possible "orders", you might want to send.  The variant contains data that could be of any type.

  Ungroup you in the consumer and get the enum and Variant.  Attach the enum to a case structure.  In the specific case, convert the variant type in a data type of regular LabVIEW and with it as you please.

• How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Using XP: I have only about 2 GB (2 000 MB) of the programs on my hard drive Go 37 and less than 3 GB of space left.

  How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Thank you.

  * original title - full hard drive. *

  Using XP: I have only about 2 GB (2 000 MB) of the programs on my hard drive Go 37 and less than 3 GB of space left.

  How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Thank you.

  Download and run JDiskReport.

  There are a number of things you can do to- temporarily - free up disk space.  The only real solution, however, is to get a larger hard drive.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)
  • You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files to delete or uninstall applications.

• Cannot print the usatoday crossword, a message appears saying wait while data and graphics are responsible for printing, but it prints ever

  Original title: usatoday crossword print

  Using Vista and an HP C7280 printer a message saying wait while data and graphics are responsible for printing, but it prints ever.

  Hello

  You are able to print all of the other files stored on the computer?

  See the bottom of the articles that might help you resolve this problem.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• How can I download an alternative for my email stationery please?

  Original title: Emails

  Have recently changed to Windows 7 Starter / Windows Live Mail in Windows XP/Outlook Express

  How can I download an alternative for my email stationery please?

  Have looked for a way, but said that I had to go in Windows Live Mail/tools/Option/composition/stationery/create new...

  no problem getting to the extent of the new message, but don't have no option of stationery!

  hope someone can advise me please

  The game, 12 March 2015 15:52:42 + 0000, Ben46 wrote:

  Wish I still had Outlook Express!

  Like you, I don't like Windows Live Mail at all. You cannot run Outlook
  Express on Windows 7, but there are many other e-mail programs, you can
  use, some by Microsoft and some third party, some for sale and
  free. And in my opinion, much better than Outlook Express. I have
  recommend you to try several and decide for yourself as you
  as the best.