Similar Questions

• Supported and compatibility against Win Server 2008R2 and Win Server 2012R2

  Hey VMware,

  I'm looking for some information like support and compatibility of the product for Win Server 2008R2 and Win Server 2012R2 platforms below.

  Here is the application name and version:

  VMware vSphere Client 4.1.0.32733

  VMware vSphere Client 4.1.0.17435

  VMware vSphere Client 4.1.0.14766

  VMware vSphere Client 4.1.0.12319

  VMware vSphere Client 4.1.0.34274

  Please provide the results of the support and compatibility for above mentioned OS platforms, also you can provide details if all other support/contact channels are available.

  Thanks in advance.

  VMware KB: Supported operating systems hosts for vSphere Client (Windows) installation

• TouchSmart HP Envy 15-j122ea: RAM upgrade and compatibility

  I was looking to upgrade my RAM and I was wondering if those that are compatible with my computer:

  http://www.Newegg.com/global/UK/product/product.aspx?item=N82E16820104477

  Thank you in advance!

  Hi @MiroslavMarinov,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j122ea and research of compatibility and upgrading RAM. Hereis a link to your page 47 for compatible memory manuals. I see that the specs are the same and you have a maximum of 16 slots for 2 x 8 MB RAM. Your choice should work just fine.

  I hope this helps.

  Thank you.

• Zbook 15 3: 3 15 Zbook and compatibility issue P5Q58UT #ABA dock

  Say, if I browse the site, dock compatibility sheet tells me Zbook 15 3 is to use the P5Q58AA docking station, but it is a bit expensive.

  Surfing the net, I found #ABA P5Q58UT who seems very similar to the plug and the model number and half price... is it compatible with 15 3?

  Thank you

  gSal

  I the Zbook 15 G3 Mobile WS model and uses the dock P5Q58UT #ABA with him and I'm sending this reply from her with the attached dock. Have a 4K and the FHD monitor attached to 2 DP ports on the dock. The power cable from the cradle to the computer is unique to the Zbook AFAIK. It is a thing with two heads with a power outlet right next to a socket on the USB - standard.

  But in any event I can confirm the dock you buy will work fine.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Schedule the Winzip files and 'compatibility' with Windows 7 - HELP!

  Hello

  I have recently upgraded to Windows 7 from XP.  I have an online game (war hammer) with some friends and need to download a few files of curse.com to upgrade my interface in this game.  Under XP, things has worked well, but here's my problem with Windows 7.

  Everything by searching my directory of war hammer I found it under Program Files (x 86) vs my normal method on my desk or in the program file.  I keep Electronic Arts Warhammer Online - Age of Reckoning - Interface - Addons.

  From here, I have the head on the Curse.com website and save the files under this folder.  Then, I went to winzip and extract use them all in the game (war hammer).  When I tried to see the files in that folder, I was surprised to see 'nothing' listed!  I called a friend to walk me through the way he his under windows 7 and for some reason any, he has his records and mine are gone.  However, there is a button at the top that says: "compatibility files"?  If I click this button then all of my files show but for some reason any, that they cannot be played in the game to do what I need to do...

  Thoughts?

  Help!

  Hi Zhadum,

  As the game is compatible with Windows 7, it is indicated herethe link of Microsoft Compatibility Center. It should work in normal mode; I suggest you contact the manufacturer of the game, as the issue seems to be with the game from the link below.

  http://www.warhammeronline.com/forums/

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Difference between routers and/or what is better?

  Hey, I currently have a WRT160N V2, I've had for a couple of years ago...

  I've been googling and researching new and better routers, but I'm not the one to choose.

  I look here http://homestore.cisco.com/en-us/products/linksys_stcVVcatId551966VVviewcat.htm

  And also http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1311&_nkw=linksys+wireless+router&_sacat=58058

  I hope I can find one that is much better than the one I have for atleast under $120

  I recommend get you the EA2700 for $99.99. click here

  Either way, if you are ready to add $30, it would be better to get the EA3500. click here

• Update and compatibility Windows 10

  Hi, I have a Sony vaio VPCEB27FD Premium windows 7 and I don't know if my computer works fine on windows 10 because on the Sony site, they say they did not drivers for my laptop but windows 10 may have the right drivers for my laptop, so I don't know if I should update for windows 10 or not. Should I update?

  Thank you

  Test the compatibility of the computer

  1 see this WiKi article - Windows 7, 8.1, 10 compatibility tests for Windows XP, Vista - WiKi.  It was written for older versions, but the discussion also applies to Windows 7 and article contains the download link, that you need for the auditor of compatibility [which should have been downloaded & installed on your computer from Windows 7 to Windows update anyway].

  2 study the drivers before upgrading your machine - see where to find the hardware drivers.

  3 search online, including the Sony user forums if they, for Sony vaio VPCEB27FD Windows 10 so see if there's useful reports by other users who have tried to level.

  Denis

• Cisco UCS 260 M 2 5.5 U3 - custom image and compatibility

  TAC has a customer turned and pointed toward a compatibility table for an installed UCS - C 260M 2, stating that the firmware of the UCS and the latest version of Vmware is not supported.

  They are suggesting that the client moves to fimware 1.5 (9) and they use a customized image of Cisco for Vmware.

  This facility is for UC/EAC, so I have to make sure that the versions supported in the docwiki for these products as well is the Vmware version.

  http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

  The drop down menu shows Vmware 5.5 U3 is a supported version and I find that 5.5 is supported in the dockwiki. So far so good.

  However, when I try to find a custom image for 5.5 U3 image only I find it:

  https://my.VMware.com/Web/VMware/details?ProductID=353&downloadGroup=OEM...

  VMware 5.5 U3a. The version of the driver specified on this page do not match driver versions indicating the interoperability matrix must be used.

  First, is there a customized image of Cisco for 5.5 U3, could someone point me to this image so that these versions of the drivers are the same?

  Secondly, can I use ISO customized Cisco to upgrade a vanilla install Vmware 5.1 U3?

  -GDR

  Greetings.

  The Cisco Custom images are just a collection of pilots who were up-to-date at the time wherever it has been presented to VMware.  It is expected that iso custom will exactly match the interoperability matrix (it could have at the time, it was created), but at least provide newer drivers than what is usually installed in the general VMware releases.

  The interoperability matrix will list the specific driver, i.e. igb driver intel 1 GB network interface.  Download you the version of the driver for VMware site and install adapt you to the requirements notified by the interoperability matrix.

  You should be able to use a custom Cisco ISO to upgrade.  When your custom installation ISO analyzes your existing system, it will see a higher version of the drivers/VIBs and update those.  The Cisco with custom isos are simply the original VMware updated versions the drivers injected into them.

  Thank you

  Kirk...

• Backdoor in Cisco routers and firewalls.

  The more I read on the NSA scandal (and Yes, I apparently a scandal) less I trust corporations hardware and software.  There is no reason for anyone to doubt that all Cisco equipment comes with a backdoor.  Because these probable backdoors exist it's a matter of time before hackers discover and exploit them.  It's happened to Microsoft a number of times and there is no reason that it could not happen to Cisco.  It is no longer our trust Cisco equipment and have already started researching alternatives network.

  It is more a crazy conspiracy theory, that is the reality.

  In all liklihood, we use a series of firewall to further isolate our network against intrusions.  To reduce costs, we can keep our existing in this topology Cisco equipment, but we will replace hardware Cisco when it breaks down or needs to be upgraded.  I do the same thing with my home network.

  In the last months, we already moved all of our e-mail to secure servers overseas and changed all our McAfee, AVG and Avast antivirus software.  We are also researching Linux distributions to replace Microsoft.

  If Cisco wants to protect their brand, they need to take a stand or see their market share continue to erode.  There must be a CEO to a U.S. company that will take this position and be a hero rather that continue to be a lap dog.

  Hello

  use open-source based linux firewalls and routers.

  and check the source cod

• Batteries with voltages different batteries are compatible and T61 T400

  I ordered a battery 9 cells for my T61. When he arrived, I installed and have used it for 6 months without any notable problems. I just ordered a new reflection T400 I could interchange the batteries. All batteries agree to these two machines, but among the old T61 battery has a voltage of 14 volts, while the 6-cell battery T400 is 10.4 volts.

  Can I use in my new T400 times 10 volts battery and battery 14 Volt?

  Is there a chance that the computer will be damaged by the use of the higher voltage battery?

  Why Lenovo does different voltage batteries that correspond to the machine even if there is a problem with one of them?

  solution: 4 batteries are 14.4 v but 6 cell batteries arer 10.8 v.

  Hello

  I own a PGG-7663

  want a 4cell battery!

  to me, it looks like all 4cells = 14.4 volts

  and 6cells - 9cells = 10.8 volts

  Why 4cells 14.4 volts and would it make the laptop run at higher temperature. ?

  Best regards

  Fan JBL

• can I use freeFTPd as TFTP server to store routers and switches set?

  We use freeFTPd for saving the Voip, now you want to save all routers & switches the set, running this free program for them?

  If yes, can someone show me the exact CLI to copy start-config to it? I ran "copy start ftp"--> enter the server IP when you are prompted, got '$error opening ftp://x.x.x.x/file (undefined error) name. He asks me user name and password, is that I can't open the path?

  If not, should what program I use here? more details, pls

  THX.

  Regardless of the user name you used and password used is that the user name and password set on the server for freeFTPd?  Is there a configuration directory for this user?  You can send a screenshot of this freeFTPd?

  This user must have a base directory, you try to put he file in the users directory, or have you created another directory in the home directory and then try to put the file in there?

  Post a few screen shots of the freeFTPd software configuration espeically than the average user is configured.

• Windows 8 and compatibility of quickbooks 2012

  I depend on Quickbooks for my business. even if I want to upgrade to Windows 8 and hope for greater stability than Windows 7, I am concerned about the comatibility

  Hello

  Thanks for posting on Microsoft Community!

  I understand from your post, you want to know if Windows 8 is compatible with QuickBooks 2012.

  Please click on the link below to check the compatibility of QuickBooks 2012 with Windows 8, depending on the version you use for QuickBooks 2012.

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=quickbooks%2B2012&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  If you need additional help, just reply to us and we will be happy to help you.
  Thank you

• Card graphic Inspiron 3847 and compatibility PSU

  Hello everyone.

  I recently decided that I get a new graphics card. And the one I want (NVIDIA - GeForce GTX 970 4 GB GDDR5 PCI Express 3.0), requires a higher power than the stock of 300 Watt one. I don't know too much about compatibility standards, so I basically just want to get a 500 Watt POWER supply. All recommendations are appreciated. I need to know what I can get which is compatible with my PC.

  Here's the link to my PC, if you need it-

  I want graphics card (if compatible).

  If you can, please let me know if it is not compatible for some reason and recommendation possible something that is compatible with my PC.

  Unless you have warranty EXTENT invalidation Mods if this card WILL NOT physically go into the matter.

  Abbreviated from the 750 GTX TI versions work, but the 970 does not.

  8.20 "to 8,89" x 4.72 "x 1.50" inches is about max (depends on the power to the enter the end of the map or in the upper part), which is what was the Geforce 560 TI, which has been shoehorned.  She barely and was VERY tight.

  Corsair CS750M is recommended to upgrade power supply.

  02G - P3 - 1568 - EVGA GeForce GTX 560 Ti KR is the c.e.a map

  http://www.Newegg.com/product/product.aspx?item=N82E16814130683

  

• VSphere APIs and compatibility ESX

  I've implemented the backup of a VMWare VM and application of recovery with vSphere API and VDDK. The development has been done entirely on 5.0 ESX servers. The following discussion provides an overview of how I implemented the restoration.

  http://communities.VMware.com/message/2130483#2130483

  When another person has tested my application, he noted the rollback feature does not work. When I've debugged, I found parameter spec unit to CreateVM_Task behaves differently 5.0 Esx to Esx 4.0. In the case of Esx 5.0, it works perfectly, where as in the case of Esx 4.0, none of the devices that I fill before the CreateVM_Task is created and the restore fails because of this.

  How can I understand the compatibility of the Esx and the vSphereAPI versions? I assumed that the SDK should be retro-compatible with Esx Server? Can someone shed some light how this problem can be solved?

  Thank you

  . / Siva.

  Hi Siva,

  That sounds good, maybe, we'll get you going even faster than I expected:

  As already noted William

  lamw wrote:
  but in general, the more recent editions of vSphere will support previous editions of vSphere. vSphere 5.1 supports vSphere 4.x and 5.0

  the only thing being that if new properties are added to a data in 5.1 object then you can not use in 4.x or 5.0.

  It seems to me that your code is based on 5.0 WSDL generated by gsoap stubs. It is ultimately you generate SOAP requests that are supposed to work with 5.0, 5.1, 6.x one as well now. Yet, when he delivers the SOAP messages to 4.x, it is likely that you include a property that is not defined in the WSDL of 4.x.

  Attached is a diff of the definition WSDL VirtualMachineConfigSpec of 4.0 to 5.0 Quick. Look at line 27 and following

  
  27              
  ====
        !>      
  ====
  28              
  

  Here, you can see that numCoresPerSocket property was not available in 4.0, but was added in 5.0. It is also what we said the documentation centre: for vSphere API 5.0.

  You declare that numCPUs is affected but memoryMB not. Between the two numCoresPerSocket has been inserted to 5.0. It seems that the 4.0 Server reads your VirtualMachineConfigSpec until numCPUs then encounter numCoresPerSocket and abandoned.

  So far my theory.

  What I don't understand is that this seems to happen in silence as you don't declare any exception. Yet, says William

  wlam wrote:
  As you know, there will be new properties in new versions of vSphere such as 5.1, that if you try to assign to an older version of vSphere, it will throw an unknown error...

  As you can learn from the attached diff we serveral more properties that have been added to the 5.0. Might well want to comment on all those in your current code and re-run CreateVM_Task against server 4.0.

  Perhaps this might solve the problem.

• Adobe Presenter 10 and compatibility mode

  I use Presenter to create training modules where I work.  Can I publish the module, but when the user tries to launch it - they get a blank screen.  I have shown that staff need to return to compatibility mode and display modules.  Is it possible that this can be done without having to do this staff?  With 1100 employees, this can be problematic.  Help, please.

  I don't know this particular subject, but I've had the opposite happen, where videos were not appear in compatibility view.  The same result of the white screen was going well.

  I added the following line to the index.htm file in thesection and it worked after that:

  Not sure if it would work exactly for you, but it could put you on the right track since its compatibility on display.