M10 SP works with DVI out and duplicator?
I bought an Advanced Port Replicator II and after I have a chance to recognize, M10 isn't compatible DVI with this Port Replicator (connector is still there on the dock...)... Nice... Well, so I tried to find some information on this case with Advanced Port Replicator III, how that fits with M10 and DVI. I tried to find a few hours of web with none of the success of answer.
On APR III-Manual they just say that "DVI may not work with your computer" without any models but with M10Pro of the work. If someone could tell me, not supporting APR III DVI with my M10Pro or is this connector only one kind of decoration as was the APR II. I really don't want no conversion DA / useless AD here.
Hello
Without unnecessary conversation, I can tell you that Replicator advanced port cannot create any signal. Signal must be created to the laptop and it comes through Apr. If the unit doesn't supports DVI there is no how to use it. As far as I know that Satellite Pro M10 and video DVI - D support via PortReplicator is not available.
In any case, you can check some interesting discussions on DVI on this forum. Go to advanced search and check for the DVI search term.
Good bye
Tags: Toshiba
Similar Questions
-
How to me to work with Outlook 2016 and 10 windows iCloud?
How to me to work with Outlook 2016 and 10 windows iCloud?
1. uninstalled and reinstalled iCloud several times - no luck
2 reinstalled Outlook 2016 - no luck
3. the module removed and reinstalled only - no luck
Help please... step by step would be appreciated.
Hi xinggirl45,
Thanks for your question. Can you elaborate a little bit and let us know exactly what does not work? The resources below provide some troubleshooting steps basic to work with Outlook and iCloud for Windows.
Get help using Outlook with iCloud for Windows
Take care.
-
Tecra M2: How to connect on port DVI - D LCD with DVI - I and at 1600 x 1200
My Toshiba Tecra M2 has a GeForce FX go5200. Docking station has a DVI - D port.
I want to use an external LCD screen which is equipped with a DVI - I port.
When you connect a DVI - D cable to the DVI - D between the ports and monitor Replicator and if I set to 1600 x 1200 which is desired (and support for the resolution of the screen) then the display does not fit in the liquid crystal display and therefore the screen starts to pan.
If I use a (next to the PC) VGA / DVI - I (next to the screen) cable then I wanted resolution of 1600 x 1200.
Please advise so how:
Connect the Port DVI - D from Toshiba to LCD with DVI - I and at 1600 x 1200.
Help, please...
Hello
I agree with Tom.
I visited the Toshiba knowledge base and found this FAQ:Max. Resolution DVI - D on Advanced Port Replikator II III & Tecra M1 and M2
http://support.toshiba-tro.de/KB0/TSB4900S10001R01.htmPS: This database is really useful. I found very interesting material. Everyone should use it.
-
The ZTE mf622 dongle works with Windows XP, and are there any software updates for this?
Original title: I gave myself a dongle from ZTE MF622.
The zte mf622 dongle works with windows xp, and are there updates software for it, as in this moment, it comes up saying dial * 99 #, when I try and connect to the internet?
Hey dude,
You should check the hardware manufacturer's Web site not in the Windows forums.
All the best, take care!
-
is it possible that a single screen will work with the slider and second focus mode
Hello
can you please tell me is it possible that a single screen will work with cursor mode and second focus mode.
Thank you
Hello
I don't think that it is possible to change the mode of the development of your application outside of in the config.xml file.
A custom extension may be able to do this, but I have not seen anyone this yet.
-
I have a HP Officejet 7300/7400 series all-in-one, it will work with Windows 7 and how to get the OCR software work?
By installing complete software functionality of the HP cd or online installation and connection of the printer only when the installation says too much
-
Hi all
I have been a user of cc muse and created 3 versions of storage for office, ipad, phone.
Recently I started working with sensitive muse and do not see a possibility to create 3 versions (in one is not good for me).
I tried to enter with Fix lenth (not liquid) but cannot create a version for phone.
Thanks for help
Adaptive and Responsive Design are both supported. Please see the discussion here reagent phone or tablet buttons update-no more?
-
I work with Lightroom 3 and want to use photoshop element 8 to edit photos.
I work with Lightroom 3 and want to use photoshop element 8 to edit photos. Problem in Lightroom – photo tab there is no option "EDIT IN". What should I do?
Hi ssft,
Follow the steps in the article to add an external editor in Lightroom Photoshop Elements 8 preferences:
Adobe Photoshop Lightroom Help | Editing photos Lightroom in Photoshop or Photoshop Elements
-
The HD I had my installed Photoshop has now died. I now work with another HD and reinstall Adobe Photoshop. I had paid about $10 a month. How can I get Photoshop working in my computer, but in a new HD? Thank you, Pablo
Hello
In order to download Adobe Photoshop, you need to download the desktop app creative cloud first.
You can please apps download Adobe Creative Cloud | Adobe Creative Cloud free trial
After downloading the desktop application, you can download photoshop through it.
Kind regards
Sandrine
-
I work with SAP HR and I want to print a HRFORM; When I try I get this message: ' Hi ha a problema amb the Adobe Acrobat/Reader. TR is esta performer, tanqueu-lo i torneu - ho a provar. (507:507).
Thanks in advance.
Juan
Thank you very much, Rahul, but the problem is in the patch level of the SAP Logon for Windows: with level patch 2 it doesn't work; with the patch of level 7, I can view and print the pdf HRForm without problems.
Kind regards
Juan
-
I'm working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says it is a secure document and editing is not allowed. How can I fix it?
I thought about it... need to use the defined comment tool, not the set of editing tools.
-
Using Windows XP and works with Fireworks CS6 and Dreamweaver CS6.
I am a student and don't have Windows XP. I work with CS6 Fireworks and Dreamweaver CS6. I can just the two of them, or do I need to subscribe to the creative cloud? Also, I can't Dreamweaver CS6 on the cloud? I know that I can not use Dreamweaver CC with XP.
Moved to this discussion in the creative forum cloud download & install.
Afec1707 I'm sorry, but you must have Windows 7 or later version for your operating system. You can find the system requirements for using cloud applications to creative system requirements | Creative cloud.
-
Code works with Dreamweaver CS6 and not CC
" < p > < a href =" javascript:void (0) "onclick =" window.open ('http://www.anything.comt', "'top = 20, left = 20, toolbar = 0, statusbar = 1, scrollbars = 1, resizable = 1')" title = "title" > name < /a > < /p > working with Dreamweaver CS6 and not CC
[Edited the title and moved to Dreamweaver - JTS]
I'm not sure I understand your point of view.
I just tested the behavior of Dreamweaver CC open in browser window. It creates slightly different Dreamweaver CS6 code, but it works correctly. This is what is created in the HTML code:
CC of Dreamweaver also adds the following code to the
to the page:function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
}
The MM_openBrWindow() function definition is necessary in the
for the code to work. But it really works OK.In regards to the _self and _blank not working do not, I find no problem with how Dreamweaver CC manages them.
However, if you feel happier working with Dreamweaver CS6, you can download it from the following page:
https://creative.Adobe.com/products/Dreamweaver
Open the menu drop-down slot "in this version" and select next Dreamweaver CS6, as shown in the screenshot:
With Dreamweaver CS6 selected, click the big button at the top right of the page download. You can download CS6 then install it alongside CC of Dreamweaver.
-
Trying to work with C4D Lite and get an error on the size of the layer
Although I worked with AE for a few years, this is the first time I tried to work with Lite C4D and obj. When I try to work with a C4D file I get this error: size of layer must match Composition and use default values for transformation.
Here are the steps I take:
- Create a new comp (1920 x 1080, square pixels)
- In AE, file > new > file of Maxon Cinema 4 d
- Name the file and it will open in C4D
- In C4D: File > merge
- Navigate to and select the file OBJ, which appears in the interface of C4D
- File > save
- In AE (window project): drag the file C4D for the button create new Comp
- When I try to do anything with the comp I get the above error.
Any help would be appreciated.
You can set the resolution in the C4D render settings. By default, it is set to 800 x 600. Read the help.
Mylenium
-
Previously worked perfectly with the following:
Computer (Windows 7) supplied with monitor connected to monitor with original DVI cable
Laptop Dell Inspiron 5547 (Windows 8.1) with a HDMI output connected to monitor via an HDMI to DVI I bought from Dell.
Two computers worked with the VGA cable supplied with the monitor. Now the VGA is intermittent. I tested the cable with another computer and there is no problem.
NOTE: I've never had the monitor connected to 2 computers, while they were on or while the monitor is turned on.
Now, the monitor doesn't not with DVI - video display. The laptop cannot detect the monitor under control panel > display > screen resolution. It only detects the built-in monitor. I can't check this on the desktop because there is no video display.
I also bought a display port > HDMI adapter but read messages explaining the need for a converter, so I'll ignore for now it does not work with DP since I may have the wrong card.
I followed the instructions to reset and diagnostics to the screen, which makes no difference. The problem is not at all, not only a bad display.
Is still of Dell do not repair out of warranty monitors? I bought the monitor directly from Dell and I find it rather hard to believe that there is no way to repair $ 300 monitor that is only 3 years old.
Any suggestions would be welcome. Or am I out of luck, and to buy a new monitor?
You run properly bid. He says on page 31, 'you can run diagnostics integrated only when the video cable is unplugged and that the monitor is in self-test mode'
So no DVI or VGA connected monitor.
Maybe you are looking for
-
http://wiki.DreamHost.com/Certificate_Domain_Mismatch_Error Certificate SSL of Dreamhost for their mail servers only at one level of subdomain while many of their clusters of e-mail exist on a second level subdomain. In my view, this translates into
-
Digital acquisition of data streams
Hello I tried (unsuccessfully) to acquire digital data of a sensor laboratory. The Guide from the manufacturer: "When the excitement of voltage, DTC Decagon sensor makes a measurement. Three measurement values are passed for about 140 ms of excitem
-
Project templates: creating my own
Hello guys,. I have a beautiful new end project that I am working with several similar test systems associated with the solution of the end. A perfect opportunity for me to create 1 project (on top of my stable of models vi) template and spawn indiv
-
Other results option ignores \n
When additional results including in my sequence of test file, I save the list to a text file in this option. Problem is, in the result queue (html) poster without any transport returns and line feeds... resulting in a very messy display. Can it be f
-
Strange call claiming to be of support technique microsoft
I just got a phone call pretending to be technical support from microsoft, and he said "your P.C. contains a virus, I called my local law enforcement agency, and then they asked me what info are they asking me for and I said my credit card informatio