m3SkPlay.exe and AppleSyncNotifier.exe Unable to locate component (respectively). Windows cannot find "C:\Windows\system32\rundll32.exe

Similar Questions

• When I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project.

  Hi im quite new for first pro and I'm having a problem when I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project. Everytime I open the project everything I see is all that media have these red, pink, blue, green, yellow lines, where pictures should be. And there is also the title of my pictures in the upper left corner. No one knows what it is and how I could fix this?

  [title published by mod]

  [Please do not double post, deleted the other]

  Right-click on the images in the project window: recharge or replace it.

• TPSMain.exe - Unable to locate component

  Whenever I start my computer, the following error message appears TPSMain.exe - Unable to locate component-
  This application has failed to start because TPwrReg.dll is not found. Re-installing the application may fix this problem.

  Nobody knows what it means and what I can do about it.
  Help, please

  Hello

  tpsmain.exe is a process associated with Toshiba laptops. He manages the power save function to ensure that the system goes to a power saving mode when it is not used.
  I would recommend to eliminate energy saver completely from the BONE by using Add and remove the option programs in the control panel. Then try again to install this Toshiba utility again. You can use this software to the tools & utility Cd or you will check the download page to Toshiba for latest updates

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Original title: SiSUSBrg.exe

  "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Hope that this is not a virus!  Help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• apdproxy.exe - Unable to locate component

  Start a box opens about five times faster that you can close the box that has the following words;

  apdproxy.exe - unable to locate component

  This application has failed to start because AocCache.dll (and in the next box AdobeQt.dll) could not be found.  Re-installing the application may fix the problem.

  In addition, I'm unable to open Adobe Photoshop Album Starter Edition 3.2.

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 01:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 02:

  I also suggest you to uninstall and reinstall Adobe Photoshop Album Starter Edition 3.2

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

• Explorer.exe Unable to locate component, this applicationfailed start because BROWSEUI.dll was not found, can access windows taskbar or white screen homepage

  Tried the boot failure, etc, but not good, were not the original windows disks

  Duplicate thread:

  URL: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/browseuidll-was-not-found/7ef0bd88-ec8f-4a5a-bde2-43d0f94cab03

  Title: BROWSEUI.dll was not found

  Details:

  I use Windows Vista Basic (build 6002 sevice pack 2) as widows try to open I get the message, cannot start Windows (explorer.exe Unable to locate component) then a message (this applicationfailed start because BROWSEUI.dll was not found, reinstall the hotfix applicationmay) it's folled by a message (windows explore stopped working) I'm then left with a blank screen bar none tasks or a desk top, the only way to access the internet is through the Manager tasks, but I have no access to windows

  Hi, AlanWalker1885,

  FYI: A moderator will pass this thread to the appropriate forum.  The post belonged in the Internet Explorer forum.  Please take note of the drop-down menus when you click on the link below.  Thank you.

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_xp

  Do you have any friends who might copy the file browseui.dll from their Windows XP CD to a flash drive?

  Have you tried to register browseui.dll?

  1. At the command prompt, place you in the %Windir%\System32 folder.
  2. Type regsvr32 browseui.dll/u, and then press ENTER.
  3. Type regsvr32 browseui.dll, and then press ENTER.
  4. Restart the computer

  See the solution given here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-message-browseuidll-file-is-not-a-valid/04b33b18-d87c-40AE-BE35-71720dbbbab2

• Win SAT.exe Unable to locate component MSVCR100.dll was not found

  I get error when you try to use REFREASH NOW in control of Panel\Performance information and tools is when the error # Win SAT.exe Unable to locate component MSVCR100.dll is not found appears. I guess that I need this file can someone please HELP me thank YOU

  Hello

  Were there any changes made to your computer before this problem?

  Perform the steps mentioned below and check if that helps:

  Method 1: SFC scanner on the computer to ensure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Follow the steps proposed by O of Marilyn and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-program-cant-start-because-msvcr100dll-is/5c9d301a-2191-4EDB-916e-5e4958558090

  I hope this helps.

• "mwlDaemon.exe - Unable to locate component. Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem.

  Vista message mwlDaemon.exe error
  At the start of Vista, I get the message "mwlDaemon.exe. - unable to locate component Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem"Question is how should I do this? Most programs work OK, but I think the problem might be preventing a backup is made.

  Hi Thegardener,

  ·         How long have you been faced with this problem?

  ·         You did changes to the computer before the show?

  Follow the steps below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 2: If the method above is not enough, you can try to uninstall and reinstall the application.

  You can see the article for more information about the uninstall of a program.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information helps.

• vSphere CLI - perl.exe - Unable to locate component

  Hello

  I installed the vSphere 4.1 CLI on Windows Server 2003 SP2 (x 32) and when I try to connect using the vicfg - nas.pl it gives error below. W2K3 x 32-bit is supported according to the vSphere CLI document. I don't know where he's going wrong then.

  
  Perl.exe - Unable to locate component

  This application has failed to start because libxml2.dll is not found. Reinstalling the application may fix this problem.

  
  Any suggetions would be appreciated.

  Thank you

  Installation of Perl is not in the Path environment variable. To the Path environment variable, add the following location:

  I think that the installation of Perl is not in the Path environment variable.

  C:\Program VMware VI CLI\Perl\bin remote

  -Right click on my computer
  -Select properties in the context menu
  -Select advanced system settings
  -Click the Environment Variables button
  -Select the path in the System Variables and click on change
  -Add the following line «;» "C:\Program VMware VI remote CLI\Perl\bin" to the Path variable

  Restart the command prompt for the path access is taken into account

• Picked up a virus and the system restore but now used when logged on obtaining a C:\windows\system32\rundll32.exe message trying to access some of the programs? Help!

  Part using the computer seems to have picked up a virus. Another person signed and restore the system. That seems to have stopped virus but when the person initially tries to use their sign on happens c\windows\system32\rundll32.exe message when it tries to access some programs (check mcafee, visit the center of security etc.) when you try to open some programs on the main screen, it says "choose program to open this file" mcagent.exe.   Any help would be appreciated.

  Hello

  It seems that the virus is not completely removed. I suggest that refer you the link to retrieve the computer of infection and check if it helps.

  Computer viruses: description, prevention, and recovery

  http://support.Microsoft.com/kb/129972

  Let us know if it helps.

• When you try to open any application in XP, get message 'open with' and error about c:\windows\system32\rundll32.exe

  my desktop icon is now working... "If I try to open any application a messege always apper" open with "a list of program... when I try to open the Control Panel control panel open, but when I try to open Add / Remove program error appear c:\windows\system32\rundll32.exe application not found. today a new appers message "this file has no program associated with it for performing this action. create an association in the folder options panel"Please help me

  Hi kipepeoliciousslemani,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. it happens with all programs you are trying to open?

  Method 1

  See the Microsoft article below and run the fixit tool available (good for Windows XP so shims), check if it helps.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Method 2

  If the previous step fails, then analyze and remove any malware or computer virus infections and check.

  The scan below only works on the 32-bit version of Windows

  http://OneCare.live.com/site/en-us/default.htm

   

  You can use the Microsoft security essentials to scan your computer

  http://www.Microsoft.com/security_essentials/

• windows\system32\rundll32.exe the parameter is incorrect. Cannoy get access to certain programs and cannot access the "msconfig".

  I get the windows\system32\rundll32.exe error following the parameter is incorrect. I tried a repair Rundll32 loading, but the computer will not accept. All microsoft and windows updates are up-to-date BLAH today. What to do next? When I try to use the box of computer help, a black box appears for about 1 second and the computer does nothing.  Not lock up and I can still do emails, just no game.

  Please run Doug Knox fix .exe (which is not a file .exe so you can run it) and then carefully swipe to the malware.

  http://www.dougknox.com/XP/file_assoc.htm
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• When I click on any icon in my control panel, a black window opens and C:WINDOWS\system32\rundll32.exe is what's wrong with the system

  When I click on any icon in my control panel, a black window opens and C:WINDOWS\system32\rundll32.exe is what's wrong with the system

  {Assuming the rundll32.exe file is not found}

  See if them can restore the file rundll32.exe:
  http://support.Microsoft.com/kb/812340 Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]