M6300 with docking station, works only with nvidia display drivers when it is docked in the windows.

Similar Questions

• I received an email with an attachment that I downloaded, when I go to open the windows media center file opens but I can't find file what I do

  I received an email with an attachment that I downloaded, when I go to open the windows media center file opens but I can't find file what I do

  I was able to open using AbiWord, thanks for the reply

• I downloaded the version track cs6 and works only. It displays the error "not found entry point"

  I downloaded the version track cs6 and works only. It displays the error "not found entry point"

  Your computer does not meet the system requirements. Refer to the card tech on the product page.

  Mylenium

• Vista on Portege M200 - some problems with nVidia display driver

  Hello

  I recently decided to update and perform a clean installation of Windows Vista on my Portege M200, now that Toshiba have released official drivers for this machine.

  Everything works fine, EXCEPT the nVidia display driver. I have the following questions with the driver Toshiba provides for this machine (97.52 version):

  (1) when the screen turns off to save power, the backlight does NOT turn off. Screen turns off but the backlight will stay lit.
  (2) for the recovery of the standby mode, the backlight is OFF. You must use the shortcuts Fn-F6/F7 to change the backlight level manually, that will bring him back.
  (3) external monitor does not work (with command Fn + F5 or nVidia control panel). External display is always blank.
  (3) video playback in WMP is very chopped (a secondary concern for me).

  Is there a chance that Toshiba could finally get a updated driver that would set out the? That would really make this machine fully functional in Vista.

  Thanks in advance for any help or information.

  Null value

  Hello

  > Are there opportunities that Toshiba could finally get out an updated driver?
  I noticed that from time to time new updates of pilot (any series of notebook) are released on the European driver Toshiba page and, therefore, I m optimistic that new updates are available

  But note; usually, various problems can be resolved by installing some patches MS Vista and missing patches.
  Then visit this [MS update website | http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us] and check if all the patches are installed.

  Best regards

• When I try to open a bookmark I get a box that says: "that should make firefox with this file? When I try to change the 'open with Internet Explorer' I can't find firefox? This bookmark has worked well in the last week.

  When I open a bookmark a box appears that says "what should firefox with this file?" open with Internet Explorer? When I browse I don't find firefox to change. Last week this bookmark worked perfectly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• Web pages display lingers when hidden - not hidden until the screen interacted with

  Just had the time to find the solution to this problem, that I experienced. Impossible to find a solution from the forums search.

  I used a QNXStageWebView and I wanted to hide when the user switches to another view of the application. I tried to set the scene on a null value, the zOrder-1 and the visible to false. None worked without a problem, as the webView wouldn't be hidden until the user attempted to interact with the latter, when the UI would suddenly be cool and hide the persistent webView.

  See below for the solution.

  The solution: set the viewport to null, in addition to affecting the zOrder-1, when you want to hide the QNXStageWebView.

  webView:QNXStageWebView = new QNXStageWebView();

  webView.viewPort = null;

  webView.zOrder = -1;

• My mother in disk hard laws burned and I replaced it with a new one when I went to reload the operating system, it would not accept the access key. How can I get a new one? with out having to buy new software?

  How can I get a new access key for windows xp pro?

  Hello

  There are several potential issues at stake here.

  First of all, make sure that you use the Windows product key is for the full XP Pro version not the upgrade version.

  Secondly, many manufacturers of computers for the last few years have provided computers with Windows XP installed, but a product key of Vista on the side.  If this is your situation, you need to call the manufacturer of your computer for the installation media or call microsoft to "downgrade rights."

  Thirdly, if you use a product key that was provided for Windows XP Service Pack 3, and you use the older installation media, it will not accept this product key.  You need to get your hands on support for XP Service Pack 3.

  Hope that helps.

• When I try to download the windows update, download 2007Microsoft Office suitService Pack3 SP3 275,7 MB 1%, it will fail with error code 80072EFE

  When I try to download the update of windows, download 2007Microsoft Office suitService Pack3 SP3 275,7 MB 1%, it will fail with error code 80072EFE, Please HELP

  Hello

  1. are you able to install some other updates?

  I suggest you try the steps from the link below and check if it helps.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update: http://support.microsoft.com/kb/836941

  Hope this information is useful.

• Menu 'Open with' do not appear when I right click on the file

  Even if I right click on the file I want to open, the "Open with" menu are not displayed. I wish it would be a way to restore the menu "open with."

  Even if I right click on the file I want to open, the "Open with" menu are not displayed. I wish it would be a way to restore the menu "open with."

  Take a look at this tutorial:
  http://www.Vistax64.com/tutorials/140508-context-menu-enable-disable.html

  Use Option 1: via a download.
  Use the Enable download button.

  t-4-2

• Activation key is invalid when you try to use the windows product key in the back of a computer in conjunction with a Windows 7 installation disc. What can I do?

  "Activation key is not valid" when you try to reinstall Windows after a crashed hard drive. I have a disc of Windows 7 Home Premium and I am using the product key from the back of a computer (it was originally an installation of Windows 7 Home Premium). Why do not match the keys, and what I have to report the earlier installation somehow is no longer active before attempting to reactivate?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How to I re - activate photoshop cc asking me what I want to do with a layer mask, when I shoot it in the trash?

  Hi all

  I need help here with reset my options when you move a layer to the left.

  I accidentally selected the "Merge to the layer" option and then click on "Do not ask again", now, whenever I move a layer mask to the left, it will merge it.

  TIA

  Nice day!

  Please try

  Photoshop > Preferences > General > reset all warning dialog boxes

  Kind regards

  Pfaffenbichler

• Firefox window becomes invisible when I try to restore the window size (larger works very well)

  When I run Firefox, the window is invisible. Maximize it works, but when I try to restore it to the previous size it becomes invisible.

  I had this problem with other applications, and then it was the position of the stored window which was damaged.

  I looked in the registry to see if the position of the window is stored there, but could not find it there.

  You can use JavaScript to fix the problem and Firefox 7.0.1 did move or resize windows with JavaScript almost impossible. You can configure your bookmark and change in about: config then only magnified, but you will need to read the notes at the bottom of the article about Firefox 7.

  Summary of the steps in http://kb.mozillazine.org/Resizing_oversize_window

  1. use 'Alt + SPACEBAR' in Windows to maximize active window
  2. Change services.sync.prefs.sync.dom.disable_window_move_resize to use fake subject: config
  3. Create a bookmarklet (bookmark with JavaScript) having a

     location javascript:self.resizeTo (1024, screen.availHeight); self.moveTo(screen.availWidth-1024,0);

     (1024, so reduce the width of your screen is less than 1024)

  4. Next topic: config should be the active tab
  5. Invoke the bookmark directly from your Favorites (with Firefox 7.0.1 you can no longer call JavaScript or a shortcut keyword with Javascript since the location bar involving move/resize).

• NVIDIA display drivers and the features of the Tablet

  Hello

  I just bought the M200 and a large external LCD display. I couldn't set the resolution for my external screen in 1680 x 1050 with display drivers that the M200 came with, so I therefore updated the NVIDIA driver to the most recent available on the NVIDIA site. I'm working, but now I can't change the direction of view through all utilities TOSHIBA - this error (translated from Danish): "the parameter is not supported. Open display in Control Panel settings, change your settings and try to change the meaning of the display again. »

  Now I have three questions:
  1. are these on the improved at all display driver? And if not, then what am I doing wrong?

  2. If it is upgraded, then how will I be able to change the direction of view and have a large external screen?

  3. If this isn't somehow possible (what would make me really sad :(), then how can I reinstall the old driver, without having to reinstall everything? I can't find the driver on any one of the shipped CD.

  Can someone help me, please?
  Thank you very much...

  MVH Asger / Denmark

  Hello

  As far as I know the driver on laptop is designed and suitable for this unit.

  This is because as the updated driver. Semblance of original driver can not support this resolution.

  In my opinion, if everything works perfectly with NVIDIA driver, which you can change displays using NVIDIA settings. I don't know exactly, but there must be nView Display Mode option.

  If you want to install the Toshiba display driver you can find on Tools & Utilities CD or you can find a last on http://eu.computers.toshiba-europe.com topic support & downloads. Go to download drivers, and there you can choose the type of product, product and the family series model you have.

  Good bye

• M30 404: Geforce FX 5200 GB vs. Nvidia Display drivers 77,77

  Hello

  When I try to install the new NVIDIA Detonator driver version 77,77 (ForceWare) then pops up this message:

  UNABLE TO DETERMINE WHETHER IT IS A NVIDIA GRAPHICS CARD. SOME FEATURES MAY NOT WORK PROPERLY.

  who is wrong? in the list of devices supported on the page from nvidia, the Geforce 5200 figure but I get the version of it. What is the problem. and if it is what are the new version of driver, I use and where do I get it?

  Hello

  Tobi is right. You should only use the Toshiba drivers because they are designed and tested for Toshiba units. Also if you are looking for latest updates, please visit the official website of Toshiba.

  http://EU.computers.Toshiba-Europe.com

  Good bye

• PCoIP zero client does not display an Horizon view Client user of the window for one (and only one)

  The zero client is a Samsung NC241 via Teradici Tera 2. My user has 3 virtual workstations assigned;  Current SOE with WinXP, a specific COMPUTER WinXP and a test for the upcoming Win7. When I connect the customer to see I'm automatically redirected to the WinXP for HER, without going through the window that lists usually all available virtual PC. This happens on all terminals, I tried. Other users, even if you connect to the same terminal, are given the option to select a virtual PC, even if they have the choice of a!

  I have checked the setting for the PC virtual in the Teradici PCoIP Management Console and also the settings of the user under the Horizon view VMware administrator but cannot find where my configurations user and desktop are different from those that work "correctly".

  Is someone able to propose what I'm looking for?

  TIA

  Thanks, Stu, for your input.

  I arrived on the solution after you follow through with your suggestion above. I used the client on a Windows PC, then after that record on I clicked on 'Options' in the bar of VMwareView Client session and erased the text is 'auto connect to this office. We have the option 'Enable automatic reconnection' set to false, so I'm not sure why that followed me.

  But the good news is that it worked!