M7470n power button flashing

Similar Questions

• HP PSC 1510 all in one printer power button flashing key.

  The power button flashes. No other lights are on.  I can not turn off the printer.

  Hello Laureldawn,

  I see this is your first visit with us here on the Forums of HP. Please, let me take a moment to say 'Welcome. '

  I have some suggestions that we can try when troubleshooting flashing lights on the printer.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and NOT a bar/power strip.

  Here is a document that uses a LaserJet printer for example, but it is intended to be used by HP products in general.  This document explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Another step we can try is the document the Treaty of lights flash.

  Please let me know whether or not these measures have helped.

  If I don't hear from you today, I hope you have a great Wednesday.

  See you soon,.

• HP Deskjet F4280: power button flashes f4280 error

  I just replaced the two cartrigades of ink. Now it gives me the letter E of the number of copy of task and the power button blinks green. It will not print and I removed the device and reinstalled, off the and disconnected. Still nothing has changed. Can someone help me with this problem? Please, I beg you.

  It seems that the printer can be stuck to the execution of a maintenance task, according to this: LINK

  I would make sure that the front access door and the cartridge access door are securely closed, or perform a hard reset. These steps are part of the Solution to the "issue: the power LED flashes" section.

  If these steps do not erase the error, you can contact HP technical support. Please let me know if it helps.

• Model: BEFSR41 v4.3! Help, please... (Power button flashes)

  I recently updated the firmware on my Linksys router - A Division of Cisco Systems. Inc.

  Firmware Release Date : September 29, 2008Current Firmware    : Version 2.00.4 Build 5Product Part No.    : BEFSR41 Ver. 4.2/4.3 onlyVer #.           Description-------------------------------------------------------------------------------2.00.1            Initial Release2.00.4 build 5       1. Fixed an issue with PPTP mode configuration with the                Setup wizard.            2. Fixed UPnP test failed.          3. Fixed RIP not updating the router table.         4. Fixed Dynamic Route not working properly         5. Fixed static Router configuration failure            6. Fixed maximum static route.          7. Fixed where client can't get IP after adding a static route.         8. Fixed UPnP link speed/duration and send/receive packet status               in the Internet Gateway.         9. Fixed clne PC's MAC address is accessable remotely.          10. Fixed QoS application based accepting invalid entry.            11. Fixed IGMPv2 client leave silently  after 100 seconds.
  

  See this URL for instructions:

  http://Linksys.custhelp.com/cgi-bin/Linksys.cfg/php/enduser/std_adp.php?p_faqid=3703&p_created=11515...

  To complete the project above, you will need the tftp.exe file, but the link mentioned at the above ADDRESS is broken.  So, to get the tftp.exe file, download it from the below site:

  The tftp.exe program is the same as the 'Setup Wizard' for the BEFSR41 v4.1 - see this URL:

  http://www.linksysbycisco.com/us/en/support/BEFSR41/download

• h [p 3745 printer does not print. New laptop HP Pavilion. Windows 8. Power button on the printer flashes.

  I have a new laptop. HP Pavilion g6. I have HP deskjet 3745. USB cable the printer plugged into the laptop. Outside the printer power button flashes.

  Try a hard reset. Unplug the power cord at the back of the printer and the wall, wait 30 seconds then plugg back.

  Make sure that the printer is connected to the wall also.

  If it does not work. Turn the printer off, unplug the printer power cord to the back of the printer, and then remove the cartridges. Reconnect the power cord wait 30 sec then insert the cartridges.

• My Mac Pro 2009 gives me only a power button blinks when I try to turn it on.

  My Mac Pro 2009 gives me only a power button blinks when I try to turn it on. External drives turns on but not the computer or monitor. I tried holding down the power button to restart but I still get only a power button blinking and no departures. It is running IOS 10.8.5 and I use it mainly for recording and mixing of music. I use Digital Performer and, sometimes, ProTools. Nothing new has been installed recently.

  fans on, power button flashing says "not enough RAM that works correctly for starting up".

• Pro 3 yoga and Hibernation power button

  Hello

  I have a problem with turn on the laptop after that it goes the way standby mode Hibernate (no doubt).

  Since the beginning, I installed Win clean 10 with the latest drivers of Yoga.

  Now when I put the Yoga sleep (power button flashes) and after an hour or so later Yoga switch to hibernation (power button stops flashing) I cannot wake it up by pressing the power button. Instead, it shows the Lenovo logo and turns off by itself. After that it works in a normal way - by pressing the power button / stop lights but don't relax after previous hibernation.

  Can someone help me with this problem? It is quite annoyng. This means that I always have to save all my work before Yoga put to sleep.

  Thanks for any help.

  Finally, I managed to solve the problem with the power button. I had disabled setting Fast Boot under windows, and everything works as it should.

• Satellite A100-225: battery power light flash orange

  Last night, plugged my AGES of NINE DAYS by Satellite A100-225, the lights were on, it was working fine.

  This morning, woke up, lights were turned off, tried to turn it on, the battery power button flashed light Orange.

  Tried to play with the cable by plugging it into other outlets that I knew worked, nothing helps.

  Have tried to start without the battery in it, without success.

  Unless there is a function that can prevent from starting somewhere, I don't know what to say. This computer is nine days old, and I do not understand how something can just wrong all night.

  Adding info if necessary - computer was on when I went to sleep, and was running Mozilla Firefox and WinAMP.

  Hello

  Perhaps the unit automatically goes in standby mode or hibernation?
  On this device, the automatic system standby/hibernation has been reinstalled. This function automatically stops the system when there is no input or material of access for a specified time. You can specify the time and select System standby or hibernation in the base of the Toshiba power saver settings tab.

  In addition, if the battery LED is flashing it means that the battery charge is low. The adapter must be connected to the battery.
  If it of not possible to charge the battery, so there are several possibilities: the battery could be dead, the AC adapter doesn't work or there is something wrong with the hardware of the laptop.

  Try disconnecting the battery several times and then connect.

  But according to your ad you tried a procedure and it doesn t work. So I think you should ask the ASP in your country to help.

• OfficeJet Pro 8600 POower power button

  Why my Power button keep flashing? Could not find anythink in the user guide.

  The power button flashes slowly on and outside?  Is the screen off or decrease for this?

  If Yes, then this is when the printer is in sleep, or power reserve, mode.  The power light usually becomes green when the printer is turned on.

• HP ProBook 470 G2: Stop slower / flashing power button / stop...

  Hello

  Ive got a G2 HP 470 here with a weird problem, whenever stop you the laptop, you see windows stops, and then the screen goes black (full black, as when it is turned off) but the power button (white) and a orange led near the AC connector Flash like for 10 seconds before the laptop shuts down completely.

  I've updated all the drivers and BIOS.  but without success...

  Battery removed etc, but also without success...

  Someone knows how to fix this or is something broken?

  Best regards

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close open windows and stop the laptop by right clicking on the icon from the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if she will now disable correctly.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• flashing screen, power button fails (error of hard disk startup, seen many posts have this)

  I thought it would be the best forum page to post, but in any case I had trouble with these two things. The first is this random/flicker flashing, screen tapping the top of the screen could delay, but this is very random and makes sometimes standby extended or even restart more rare. I don't think overheatiing is because it looks cool enough. Very random though sometimes it happens not every day or a few days.

  The power button is very recent, it turns that if I do something such as unplug it or open/close the screen as I've seen, really don't know where these two could come, but this laptop is second-hand on ebay with a new OS installed.

  The HARD drive error is common so I saw, so I can deal with it. The usual startup error, a reboot solves this problem and it starts to load normally, have not seen all the patches, in addition to a clean wipe I don't want nessiserally to do.

  A few things you might want to know:

  OS: Windows 7 Edition home premium

  Quad core i5

  graphics card intel integrated (use an ATI mobility Radeon HD 5650)

  Just ask if something else should be, thank you.

  I suggest to retrieve what you saved on your laptop and replace the HARD drive, you now have. It seems that the HARD drive, you may be out of any day. Make sure the replacement HARD drive is not too big.

  THX

• Acer cannot turn on after install Win10 - get 5 flashes on the power button - nothing happens.

  Last week I have installed Win 10 to my Acer laptop 4830 t. rebooted several times and things seem to be ok. I tried playing a CD and got an error message about its incompatibility. Before I could upgrade to the drivers, the system entered hibernation mode and now don't restore or restart at all. I just get 5 flashes on the power button and nothing else. Yes, I've tried holding the power button until 2 minutes. I can't start or get any diagnosis since the system refuses to power on. I tried removing the battery but the battery is integrated and inaccessbile so I can't disconnect it without removing the motherboard to disconnect the connector of the dough. No possibility to boot on USB or CD/DVD car will not be powered. Technical support said they cannot help me if I can't remove the battery (uselessness is which?!).  Apparently they have not suport scripts that relate to the actual products because it is a classic process for much older laptops.  I am an expert IT guy and has more than 20 portable and built a lot of my own computers.  I wonder if anyone has experienced this problem or has any helpful suggestions... Thank you.

  Here is a rather unorthodox method... what worked for him.

  http://community.Acer.com/T5/V-and-VN-series/aspire-V5-wont-power-on-power-light-blinks-five-times/m...

• Power light flashes

  I have a late 2009 Mac Pro, that will not start and the power LED flashes continuously. I tried all the different buttons start without success.  Any suggestions?

  This error code means that there is not enough RAM to work.

  When yo get that open the side cover and search lights lit by strips of RAM

• TouchSmart 610: TouchSmart 610 lights. I have a set of 5 beeps with a yellow light above the power button.

  I keep my office earlier this morning with the entry of the normal shutdown process. When I went to reactivate tonight all I get is a set of 5 beep with a yellow light flashing above the power switch. Repeat this five times then beeps stop and only yellow continuous flashing. I can hear and feel the hard drive running. I tried to unplug the power supply and then plugging, but the same thing happens. If I push and hold the power button on, it sounds like the hard drive stops and restarts. The normal blue light comes on for a few seconds then turns off and is replaced by the yellow flashing light. All you have no idea as to what may be the issue?

  Hello:

  Normally 5 beeps means there is a problem with the memory.

  I suggest that you remove and reinstall the memory modules and blow up if this doesn't fix the problem, if your PC has two memory modules, an and see if the beep disappears.

  If this is the case, remove this module and specify the first condition in you removed and if the beep begins once again find the defective memory chip.

  If it is not, remove the module and put the other in you deleted and if the ringing stops, you have found the faulty memory chip.

  Then replace the faulty memory module by one with the same specifications.

  If the ringing continues despite trying these steps, and then either the two chips of memory are bad (unlikely), or the motherboard has a problem.

• Portege R100 stoped working - the power LED flashes error codes

  I have a R100 that has suddenly stopped working.
  The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.

  That - what it means, and where can I get a list of all codes error?

  I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.

  I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?

  Thanks in advance.

  Hello

  I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.

  In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
  Here it s only a user to user forum and I have never seen anyone from Toshiba again.

  Anyway, here you can search for the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!