Portege R100 stoped working - the power LED flashes error codes

I have a R100 that has suddenly stopped working.
The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.

That - what it means, and where can I get a list of all codes error?

I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.

I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?

Thanks in advance.


I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.

In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
Here it s only a user to user forum and I have never seen anyone from Toshiba again.

Anyway, here you can search for the nearest ASP:
http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

Good luck!

Tags: Toshiba

Similar Questions

  • what it means if the power LED flashes red, that I am plugged into the power outlet

    help what is a flashing red light on average power

    Yes, the batteries in laptops are like any other rechargeable battery, they have a life cycle. Since the bits of information so far, it sounds as if you do not want to replace the battery. You can see what is essentially a stack to the page linked below:

    How to replace your laptop battery

    What I would say has visited support site for the manufacturer of your laptop; using your specific model name/number search for laptops support page. You should be able to get some type of documentation that will explain the flashing red light. Also get the specifications for the battery of your specific model (see technical data). Though on checking support site for the manufacturer to see if they have their own forums, if so you may be able to find details about the light, and what is involved in the specific battery in your laptop.

    Computer manufacturers

    Kind regards

  • HP mini 1109tu does not illuminate and has its power led flashing

    Well I just got my Bill Mini of the day the following day and while they were inspecting it this morning the power led flashes and it won't turn (even on the battery mode).

    [IMG] http://i168.Photobucket.com/albums/u171/Arnaehl/img_96221_hp-1000.jpg [LINE]

    Will or may someone help me solve this. I can't bear to look at my dead minis.

    Thanks in advance.

    HP mini 1109tu


    Arnaehl wrote:

    Well I just got my Bill Mini of the day the following day and while they were inspecting it this morning the power led flashes and it won't turn (even on the battery mode).

    [IMG] http://i168.Photobucket.com/albums/u171/Arnaehl/img_96221_hp-1000.jpg [LINE]

    Will or may someone help me solve this. I can't bear to look at my dead minis.

    Thanks in advance.

    Try a hard reset.

    Disconnect the electric plug. Remove the battery.

    Press and hold the power button for 15 seconds.

    release the power button.

    Plug the AC adapter.

    Press the power button.

    Best regards

  • the G7 1113eo lights. Power led flashes 3 times pls help

    Hello, im hoping someone can help me, I have a 1113eo of the g7. that does not start. the battery has been dead for a while, but his works well with just the adapter. But yesterday it no longer starts, I tried to do the hard reset (remove battery and hold the power button for 15/30secs) but who did not work, so I started to disassemble that he virtually stopped when I discovered that I didn't have a screwdriver. then press the button power again just to check, and the pc started. a stroke of luck was good cause I tried to restart and it started again.

    whenever I press the power button, the little led next to the power supply, flashes 3 times. No its or other led´s flashing

    Please help me

    (ps the warranty is no longer valid)


    It is certainly not good if you are able to check the adapter - my main concern, as you was able to get the laptop to start only once, is that this may also indicate a possible problem with the power supply Board.

    Kind regards

    DP - K

  • Pavilion a1130n block of POWER LED flashes when it is connected to the mobo

    We had a power outage and now PC won't start at all and power and power supply lights both blink.  I went through the list of power supply.  When everything is unplugged PSU led remains lit.  When I plug in the mobo light starts flashing again.

    On another forum, someone suggested clearing CMOS as check/solution possible, but I've seen suggested once on all of the controls/solutions out there.

    Should I try clearing CMOS or who would really do something to help here?

    Also, I am trying to determine the most cost-effective path of repair/replacement.  The main consideration for me is software and data on the hard drive, I would really like.  I know that the machine is old so I'm thinking the mobo may need to be upgraded in any case of 6 years and the PSU, should probably due to his age and the likelihood it will fail before too long.

    Any guidance is appreciated.

    lardfw wrote: I deleted CMOS (using the pull method) and there is no change. Well, I understand that it was a long shot. I followed the checklist (do not skip steps).  I was a little fuzzy on the checklist is should I go ahead and take memory cards and disconnect the headset, microphone, usb ports, etc to the MoBo? During the only thing connected to the PSU is the MoBo.  Nothing connected to the PSU = green fixed.  Connected to the power supply flashing green = MoBo. So my concern is passed: the hell of the MoBo or PSU is (because I'm buddy up to the idea that it is).  in order to use the hard drive in a new configuration (specifically the software and data on the hard drive).

    Hello lardfw, with nothing connected to the motherboard and you try to start the system, if the motherboard was not defective, with the power supply work as it should, you get all kinds of sound signals, especially when the memory is removed.

    I'm sure that the motherboard has failed. You should be able to remove the hard drive and install it into another system such as a secondary drive and not the bootable disc and be able to copy some files from the hard drive. You would not be able to access the applications.

    Once you have recovered all the data you may be, you could then reformat the hard drive and use the total capacity of the disk as a backup, or even use it as a bootable stick with a new operating system installation.

  • Qosmio X 500 does not start and the power LED is flashing every 5 seconds

    I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.

    If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.

    I tried to:
    * Remove battery and power up with AC only
    * power only to batteries
    * remove the battery power button hold for 30 seconds and over power with AC, battery only athen

    but it did not help.

    I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.

    No idea where could be the problem?

    Thanks for help


    The failure of RAM could be the reason for this behavior of the laptop.
    Remove the RAM modules with good modules tested and check the functionality of the laptop.
    In the case of RAM isn t the troublemaker, the motherboard could be affected.

    Good luck and share your experience with us.

  • HP Jet 11: 11 flow does not illuminate. Power led flashes 3 x

    I am trying to fix a 11 HP flow for someone and I'm running into some issues here.  Basically, the computer does not light and the power led blinks three times.  I did all the options to reset that I could find online, and the power brick works.  The person said that she may have fallen, so I think this has something to do with that don't turn only not on.  No idea what the three blinking lights could mean in this case?  Thank you.


    Flashing codes mean.

    1 blink = CPU does not

    2 flashes

    -L' laptop can load if given enough time.

    -If the laptop starts to load, try to start the BIOS of several times the ESC key until the Start Menu appears. Press the F10 key to enter in BIOS

    > Started the laptop?

    -Yes. The laptop started

    -No, the laptop is not started. At the moment, it seems that the BIOS is damaged.

    3 flashes = Module of Ram error

    4 flashes = failure of the graphics card

    5 flashes = hardware failure

    6 flashes = BIOS authentication failure

    I hope this helps.

  • Satellite L500 is OFF and the Green LED flashes if hooked on sector


    I have a L500 which is not outside the green light flashes when the power cable is plugged in, but does nothing else


    What indicator do you mean exactly?

    DC (first on left) indicator lights up green when the properly feeding the power adapter. If the output voltage is abnormal or if breakdowns computers power indicator lights.

    The other indicator (power led second from left) lights green when the computer is turned on. If you turn off the computer to sleep, this LED starts blinking Orange.

    Also if there is a failure of memory Power LED repeatedly flashes
    0.5 sec and off 0.5 sec
    If there is a problem with the slot A the LED flashes two times orange then green once
    If there is an error in the B slot, the LED flashes orange green once then twice
    If there is error in the slot A and B the LED flashes two times in orange and green.

    But if the power light flashes green only, I guess there is a motherboard problem.

  • IdeaPad U310 tactile power led flashing


    I just noticed that the power led of my touch u310 flickered continuously. The led on the power button also flashes constantly. The flashing happened even after I shut down the computer. The only time wherever the lights flash when I disconnect my ac. Anyone know what could be the cause of the problem?

    Thank you

    It turned out that I disabled the smart update of lenovo and my problem went away.

  • Under Vista, my fan starts and stops, makes a loud sound and the power light flashes

    My fan starts and stops, resembles a car reving his engine. The power led also flashes. Gateway gt

    * original title - my fan starts and stops, resembles a car reving his engine. The power light flashes too *.


    If you have nothing on the screen, including a splash with logo screeen, etc, contact gateway if under warranty

    If it is under warranty, contact a local reputable computer repair workshop

  • DELL UltraSharp U2515H Monitor - fixed the power LED mode indicator sleep?


    I just bought a monitor DELL UltraSharp U2515H 25 and in the course of the day before (Mini DisplayPort) Power LED flashes during the standby time.

    Can you tell me if this is normal?

    This indicator returns to fixed when using the display and it is possible to turn off the light while turning on the unit via the OSD menu. (Page 41 of the french DELL user guide)

    The link provided above a video illustrating the behavior of the screen (IMG_7073.MOV)

    Manufacturing date: Apr. 2015
    Review: REV A01

    Thank you in advance for your support.

    Kind regards


    It is normal to blink while it is in standby mode. White light indicates the monitor is on and fully functional. A glowing white light indicates the power saving mode. Did you put the Power button LED "off during active?

  • (Model: D6000 ac750) Only the Power LED comes on after start


    When I turn on my router, only the power LED comes on, no other LED lights. Ive been waiting for awhile as well, switching router on and outside, from time to time but its still the same result, only power LED lights

    I think this happened because of the failure of an attempt to upgrade my modem firmware, which I clicked on another tab, stop the download. After that, the modem turned off and only the power LED came on when I switched it back on

    any help would be apperciated, thank you


    I would say that the modem can be bricked you wish to contact Netgear phone support if it is still under warranty.



  • My Nero8 crushed & stoped working: the failing Application path

    My Nero8 crushed & stoped working: the failing Application path: program files Files\Nero\Lib\NMIndexStoreSvr.exe how can I Nero8 back to work without having to buy a new there upgrade version (Nero AG) they offer for me as a single fix?


    1. you made any hardware or software changes the computer recently?

    2 is the issue limited to Nero 8?

    3. what operating system is installed?

    Try the following steps.

    Method 1.

    Step 1.

    Uninstall Nero 8 using the tool to uninstall Nero 8: http://www.nero.com/enu/support-nero8-tools-utilities.html

    Step 2.

    You can download Nero here: http://www.nero.com/enu/downloads.html

    Clean boot the computer and then try to install Nero 8. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Method 2.

    If the steps above do not help, then contact support for Nero here: http://www.nero.com/enu/support-contact.html

    I hope this helps.

  • KDL-46XBR9 shuts off and the power light flashes red

    KDL-46XBR9 shuts off and the power light flashes red

    It flashes ten times, then rehearsals.

  • My cd rom device does not work because its configuration in the registry is damaged, (error Code 19).

    My cd rom device does not work because its configuration in the registry is damaged, (error Code 19). Tried all the easy solutions (update - was active), any ideas? Thank you


    ·         What is the accurate and complete error message?

    ·         You will remember to do recent changes on the computer before this problem?

    I suggest you follow the steps mentioned below:

    Method 1:

    Race fix from the following link and check if the problem persists:


    Method 2:

    If the previous step fails, follow the steps in the link:


    Method 3:

    If the previous step fails, follow the steps in the link:

    http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

Maybe you are looking for