Mac Fast User Switching does not properly

Similar Questions

• The user profile does not properly

  Turning on my computer these days, I get a message that says:

  Your user profile was not loaded correctly: you have been logged on with a temporary profile, the changes you make to this profile will be lost when disconnected. Please see the the event log for more information or contact your administrator.

  I have Windows vista, SP2 on my toshiba computer

  I'm not the most computer intelligent person, but in this case everything that has been saved on my computer such as photos, music, etc. is not on the computer. Anyone have suggestions on what to do or try on this message.

  Thank you

  Toshibasheila

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  -----------------------------------------------

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Switch Windows user option does not work

  Windows Switch User Option is not Working.please help.if, anyone can remotely my computer please solve my problem.ihave tried myself to resolve according to the method of microsoft but failed.please response and solve my problem quickly.

  Hi AbdullahEjaz,

  1 find the computer on a domain network?

  2 did you do changes on the computer before the show?

  I suggest you to refer to the following articles and check if it works.

  Fast User Switching option is not available

  http://support.Microsoft.com/kb/280758

   

  A discussion on the availability of the fast user switching feature

  http://support.Microsoft.com/kb/294739

  Let us know if that helps.

• Yosemite user model does not

  I have 20 macs in a University laboratory image in the same way, with a user model that I created.  Worked fine for several months.  Lately, the chances that my user model does not load correctly is 50-50.  This takes the form of:

  • the loading dock is generic and does not include my shortlisted apps
  • wallpaper is the default 'Yosemite' image and not the wallpaper that I created
  • or, the mounted drives are not displayed on the desktop.

  

  Pictured above, the bottom image is what I call a wrong profile.  It is in this profile, you can see that the dock, HDD and wallpaper are not loaded; However, things like the Finder and Safari open to the correct location, based on a template.

  I can log in and out of the same machine all day and arrive at a 30 to 50% chance of the model charge properly.  However, I need this number to 99.9%

  Our laboratory is partially controlled by JAMF/Casper to load scripts at startup.   These logon scripts in the form of:

  • load the customer print PHAROS
  • load a "alert of emergency of the University" application in the dock
  • If the user has a folder on our server, xsan, Casper Mont scripts this folder on the desktop (this feature works on our Mavericks stations, but is broken in Yosemite).

  What process occurs when a user connects and the model is pulled?  Is it possible that Casper connect you scripts could be in conflict with the creation of models of the user?

  Solution: The question is a folder called Non_localized, reflect the English.lproj content with this file in template/User.

• I tried to set the fast user switching, but when I click on save changes and go back, the box isn't here.

  Original title: cannot switch on Windows XP users

  My problem started on December 3, 2011 when I left my computer for lunch. When I came back, my screen saver was. He asked me to enter my user account password to log back, it does not take me to the Welcome screen. Then I entered my password and logged on. I tried to give to fast user switch, but when I click on save changes and go back, the box isn't here.

  My system
  OS: Windows XP Pro
  Media Center Edition
  Version 2002
  Service Pack 3

  If the system restore didn't help, use the line 34, left side of the http://www.kellys-korner-xp.com/xp_tweaks.htm

• How can I activate the fast user switching once its off on vista home

  don't know what I did to turn it off, not 'the only administrator' and can not find where to turn?

  fredieu416,
  Fast user switching is incorporated with Vista.  When you click Start and go to the arrow next to the lock button, you should see the option to switch to the user.  Is there something that does not work right now with the settings of the user? Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cisco ISE and the fast user switching

  Greetings,

  In our deployment, we are interested in using the "fast user switching" which lies in the functionality of Windows.   After searching for a while, I see that the native Windows supplicant is not compatible with the fast user switching.   It does not appear that Anyconnect is either.   Can you please inform me as to what suppluicant, I need research to enable the functionality of Switchign user?

  We currently use ISE 1.2 Patch 4.

  Thank you for any assistance.

  David

  Cisco EHT NAC Agent does not support Windows fast user change when you use the native supplicant. This is because there is not clearly the older user disconnecting. When a new user is sent, the Agent is hung on the ID process and the old user session and therefore a new posture cannot take place. According to Microsoft Security policy, it is recommended to disable the fast user switching.

  Source:

  http://www.Cisco.com/en/us/docs/security/ISE/1.2/user_guide/ise_pos_pol.html

• You can disable "Fast user switching" in window 7 Professional?

  Windows Help on the 'Welcome' screen, said that "Fast User Switching is enabled by default," which means that it can be disabled.  But Windows Help does not say how this could be done.  Can someone explain?

  I also want to turn off the display of the names of user accounts available on the 'Welcome' screen, as we did to the XP, but it seems that it's not possible.  True? -JCW2

  See if it's what you want.

  http://www.SevenForums.com/tutorials/61650-log-user-name-password.html

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• How to turn on the fast user switching feature

  Some laptops running XP Pro where the user-defined function is not allowed... click closing of session start and only guests to not log users to switch...

  In Control Panel under user accounts there is no option to "change the way users log on or off?

  If your XP Pro machine is part of a domain, then fast user switching is disabled.

  "How to use the Windows XP Fast User Switching feature"
    <>http://support.Microsoft.com/kb/279765 >

  "The fast user switching option is not available.
    <>http://support.Microsoft.com/kb/280758 >

  ATTENTION: Before changing your machine from a domain to a workgroup, be sure that you have a local administrator on your computer account is not part of the domain - otherwise, you will probably you locked out of your machine.

  "You can not connect after you remove the computer from the domain.
    <>http://support.Microsoft.com/kb/317049 >

  HTH,
  JW

• Cannot use the fast user switching.

  Me and my partner to use a laptop running Windows XP Home Edition. Up until recently, I was always able to use the fast changing users to switch between myself and my partner (the two administrator) accounts. Since installing AGV PC Tune up, WAS not worked and we both close completely to change username. This takes time and obviously becomes a pain in the rear. Anyone got any ideas?

  See if one of these items:

  "How to use the Windows XP Fast User Switching feature"
    <>http://support.Microsoft.com/kb/279765 >

  "A discussion about the availability of the fast user switching feature.
    <>http://support.Microsoft.com/kb/294739 >

  HTH,
  JW

• I can't access my home screen and the fast user switching!

  I get an error message when I try to change the way I connect
  "client services for NetWare has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the Client Services for NetWare. "
  What is NetWare? Where is he? I don't find it on my program list to remove it! Help!

  To resolve this issue, follow these steps. NOTE: If you rely on access to a Novell network and need the Client Service for Netware or the Novell Client, you cannot use the home screen or fast Windows XP user switching features.

  1. If you are using the Novell Client, see the following Web site for instructions on how to uninstall Novell support:
     http://support.Novell.com (http://support.novell.com/)
  2. If you are using the classic view in Control Panel, double-click network connections. If you are using the category view, click on network connections and Internetand then click on network connections.
  3. Right-click each connection that you have, and then click Properties each time.
  4. Under the tab general in each Local network connection, select the Client Service for Netware, and then click Uninstall.
  5. In the Dial-up connection properties dialog box, click the Networking tab, highlight the Client Service for Netwareand then click Uninstall.
  6. Restart the computer.
  7. Open Control Panel, and then double-click user accounts.
  8. Under pick a task..., click on change the way users log on or off the power.
  9. Click to select the opening and closing of session options you want: use of the Welcome screen or use quick user change.

• I am the administrator on my pc. and my user profile does not load.

  recently, when I connect I get a message saying that the user profile does not, or will not, support. How can I fix it? Be admin, I can't make all the changes that my profile does not load. I can connect with my husband and children, as their loading user profiles, but, when I try to make changes and type my password properly, it won't connect so I can't do anything! Help! Thank you!

  Yes, you will lose everything when you re-install.

  If you are able to logon to an account that can back up personal files as much as you want to keep on an external hard drive, or Flash drives or DVDs.

  You will need to re - install all the programs you already have installed.

• Windows 7 Home Premium - fast user switching

  I would like to wish disable you in Windows 7 Home Premium of fast user switching. It is not a Group Policy Editor in Home Premium for this then, how is that possible? If it cannot be directly turned off please let me know how I can disable the change user displayed in the login screen the menu stop.

  Thank you.

  Hi jv59,

  Welcome to the Microsoft Answers site.

  As the Group Policy Editor is not available in the Home Premium from Windows 7 version, the other way of disabling it is through the registry editor.

  Important: this article contains information about how to edit the registry. Make sure that you back up the registry before you edit it. Make sure you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  1) click Start, type regedit.exe in the find dialog box or run and press enter.

  (2) go to HKEY_LOCAL_MACHINE-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------system

  (3) create a DWORD (32-bit) value named HideFastUserSwitching with a right click on the right side of the editor and choice New > DWORD(32bit) value.

  (4) set data HideFastUserSwitching to 0 to disable the fast user switching.

  (5) in the future if you want to enable the fast user switching, set data HideFastUserSwitchingto 1.

  After, log to see the changes. Fast user switching must be disabled after completing the steps above.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• on/off switch does not work since the SIERRA

  Hello

  Since I'm sierra os that the on/off switch does not show me the dialogue window in which you can choose between power, reset, disconnect you.

  This is a problem of Sierra? There is an option in the system Pref?

  Thank you

  It works very well in the Sierra.  Simply press the button longer.