MacBook 13 slow response

Similar Questions

• Slow response from the keys

  Hello

  some time after the start of my laptop, I'm starting to get a slow response by pressing and holding a button. Which means that, when I release the key the character continue tp appear about 2 seconds more! So, for example if I use the arrow keys, that I do not in the exact spot I need because the cursor will continue several characters to come.

  I was told to format and reload my os win 7 all over again, is there anyone with a better suggestion?
  Thank you, dror

  Can you please tell us what model of laptop do you have?
  What operating system do you use? Do you use BONES that you got with your laptop?

  Since when you noticed that slow down the issue of the response of the keys?

  When you start the laptop in SafeMode the same thing from happening again?

• Performance of the hard drive, runs at 30% all the time; slow response

  Pavilion Slimline works 30% all the time, slow at times, all the time. Run the Task Manager, identified all of the questions.

  Defragmentation, historical, navigation can be run. Registry cleaner also run.

  Still slow responses,

  Suspect still running games, must stop them, as well as other unnecessary programs.

  Any suggestions, useful, believe, this will solve the problem and improve poor performance.

  Thank you for the comprehensive answer. If the speed is the main problem now, theoretically, upgrading the hard drive would be able to increase the speed up to a point. Of course, this would impact speed of normal programs, programs on the web, etc. I also carefully read the document provided Red Rose, and although it is informative, I don't know about most in this paper has been tried.

  Regarding the age of the laptop, age obviously decreases the computer's full performance, and you have little control over this, unless you buy another computer.

  I have an idea of how research and troubleshooting have achieved you, but it is only an idea. I'll link some documents with information that you may or may not be useful:

  http://Windows.Microsoft.com/en-CA/Windows-8/improve-performance-optimizing-hard-drive

  http://itzkumar.WordPress.com/2010/07/03/10-ways-to-increase-hard-disk-life-and-performance/

  Let me know if you have any other questions, and I'll do my best to help you.

  Mario

• MacBook Pro slow and stop, memory or HARD drive or motherboard?

  These last few months my Macbook Pro medio 2012 begins to slow down. I was thinking of a resettlement but has not had the time yet.

  Last month, he really slow started to freeze and stops instantly. It reboots and then I get a gray screen saying with the icon (a card with a questionmark in there) that it cannot find the boot disk drive. I close it again with the button and restart, then it starts normally. This would have me believe it has something to do with my HARD drive or the motherboard, but then again I'm not a tech guy so I guess just really. Then I got the idea to do a test of material, with this error as a result: 4MEM/62/40000000: 0x81d97590

  After searching the Web, it would mean that my memory would be bad/broken. I read in another post to download an app called 'Remember' which tests your RAM. I tried yesterday and it worked fine, nothing was wrong. But today I did once again when my Macbook was slow functioning again and went to do some other stuff. When I came back my Macbook has a black screen, a Word to insert a boot disk. I just stopped and restarted again and started normally. It is a little slow to clear grey screen with the apple logo.

  So my question is, does anyone know where the shoe pinches, RAM, HARD drive or the motherboard? Will also contribute to a reinstall? Can I check if my RAM is always placed properly or is maybe dirty? I use an application called memory monitor for clean working memory from time to time. I'm updating to El captain, wanted to do it instantly when I want to do a clean install on my mac, but I think I'll wait with that I know where the problem lies.

  Really hope someone can help me!

  Kind regards

  Mike

  This was the report on closing down:

  accident report

  Anonymous UUID: 2DD0FAD1-4D38-B739-F019-9F395B5DB6AD

  Sam Nov 28 17:54:55 2015

  Panic report *.

  panic (cpu 0 0xffffff80037c127e appellant): "launchd died\nState to the last Exception:\n\n"@/SourceCache/xnu/xnu-2782.50.1/bsd/kern/kern_exit.c:363.

  News of the UUID:

  uuid = 0x7fff61d7e000

  uuid = 0x108fa1000

  uuid = 0x108ff1000<4396b358-725e-3ec0-bcbb-e4bf75fe1fb0>

  RAX: 0 X 0000000002000001, RBX: 0000000000000006 RCX 0 X: 0X000000010A2800E8 RDX: 0 X 0000000000000000

  RER: 0X000000010A2800E8, RBP: 0X000000010A280190, IHR: 0X000000010A27FF40, RDI: 0 X 0000000000000001

  R8: 0 X 0000000000000000, R9: 0X0000000108FE09F0, R10: 0X00007FFF91399B02 R11: 0 X 0000000000000206

  A12: 0 X 0000000000000000 R13: 0X00007FFF9688D7E0, R14: 0X000000010A2805D0 R15: 0X000000010A280790

  RFL: 0 X 0000000000000206, RIP: 0X00007FFF9139795A, CS: 0 X 0000000000000007, SS: 0 X 0000000000000023

  Wire 0xffffff8021e8a970

  0x00007fff9768fdab

  0x00007fff9768fec8

  0x00007fff976893b4

  0x00007fff9c109a6c

  0x0000000108fcf907

  0x00007fff96a7de73

  0x00007fff96a80dc7

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff80220c1798

  0x0000000108fb8c91

  0x00007fff96a7de73

  0x00007fff96a815cd

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff8021e8a000

  0x00007fff96a8226e

  0 x 0000000000000000

  Wire 0xffffff8021fb15c0

  0x00007fff96a81925

  0 x 0000000000000000

  Wire 0xffffff803a4bd000

  0x00007fff96a8a4e6

  0x00007fff96a8293b

  0x00007fff96a813bc

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a821a3

  0x00007fff942c605a

  0x00007fff942c5fd7

  0x00007fff942c33ed

  0 x 0000000000000000

  Wire 0xffffff8037edb2e0

  0x00007fff8fbeaf1a

  0 x 0000000000000001

  0x00007fff61d8a475

  0x00007fff907537b5

  0x00007fff9765e648

  0x00007fff9688d7e0

  0x00007fff9688fddf

  0x00007fff96a7de73

  0x00007fff96a7e8ca

  0x00007fff9688e0a7

  0x0000000108fcc393

  0x00007fff96a7de73

  0x00007fff96a815cd

  0x00007fff96a81030

  0x00007fff96a813bc

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff8025fd2e28

  0x00007fff942c33dd

  0 x 0000000000000000

  Mac OS version: 14F1021

  Kernel version: kernel in Version 14.5.0 Darwin: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Name of system model: MacBookPro9, 1 (Mac-4B7AC7E43945597E)

  an application called 'Remember' which tests your RAM. I tried yesterday and it worked fine, nothing was wrong.

  This is not the right way to think about memory problems. When the test of the RAM ALL said that there is a problem, it's the truth. RAM problems are very difficult to isolate, and a diagnostic runs, but can't find the problem, if NOT "nothing was wrong" which is "he cannot find the problem immediately."

  This isn't a mystery. DIMM RAM, not another thing is more likely to fail. Then you could try Rember running all night, you could try to remove one of your DIMMs and see if chess stops, you can try to get a new DIMM and see if they work better.

• Very slow response OR Executive Panel Test Switch

  Hello

  After you have installed the Developer Suite 2010 we have problems with the Switch Executive Virtual Device Test Panel. The problems has not been seen on old revisions.

  The Test Panel takes about 3 minutes to initialize. This only happens after that MAX was launched and the Test Panel is used the first time.

  In the attached example there is no committed material, the unit is in simulation mode.

  The same slow response happens to TestStand when you try to select the virtual device. Responses of selection after about 6 minutes, means that it takes 6 minutes for a list of all virtual devices available in MAX.

  

  I have attached the report of support of MAX, the configuration of the IVI, the export file SE virtual device and an example of TS.

  Any help on this appreciated problem.

  Thank you

  Matthias

  Hi Eric,.

  After you run the tool to remove the Corruption of database MAX Test Panel now works correctly and as expected.

  Also MAX launches much faster now than before.

  Thank you very much for your quick help and find the right solution.

  Best regards

  Matthias

• Computer slower responses a

  Original title: problems

  I have a PC that has more than 10 years. I have known many and frequent problems for awhile like freeze and extremely slow response time and error messages to something as simple as turning off the computer!  This is more likely to be the consequence of age or some kind of virus or malware, and what I can do about it?

  Give this link to look for a material of great.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• many runtime errors and slow responses

  Originla title: what is WiseFixer and is a legitimate program?

  I get a lot of errors of execution and slow responses.  Ran the scan in the wise Fixer but was reluctant to unlock the registry to run the repair.

  Hello

  · When you receive the errors?

  · It is when you work with a program or a particular application?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  · Give us the exact error message that you receive to help us best solve the problems.

  For the problem with the performance of the computer, you can follow the steps in the link below: how to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• Laptop HP Pavillion DV7 - HDD1 real slow response

  I have a laptop HP DV72185dx of 2.6 years. It has two 500 GB HARD drive. The HDD1 is having very slow response of the week times last 1. I did a HARD drive test in BIOS menu. For HDD1 the quick test stopped at 17% with an error code of 303. Then he went into full test and stopped at 4% with an error code of 305. INTELLIGENT test succeeded. HDD2 passed all three tests OK. Pls advise if it needs a replacement HARD drive. If so, what type of HARD drive me I need to buy. Also is there a program that can ghost HDD1 data to the new drive HARD (I don't want to miss this chance on some software programs that are already installed.

  Note: I have Win 7 Home Premium (64-bit). I guess that my laptop warranty is over.

  Hello

  As you mentioned that the error code 303 said that the hard drive is down on the unit you will need to replace the hard drive. Please replace the hard drive the same capacity & if possible the same company as it will be easy for you if you enable active RAID please go through the below web link.

  What is RAID technology

  Intel® Matrix Storage Manager

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

  
  

• Windows mail-Slow response to any command

  I use Windows Mail and have experienced incredibly slow response to each order. It loads OK, but always takes for 'Create a message,' 'reply', etc, etc. If I try to "force" the issue by clicking on the window which is actually really difficult to load, I get a "not responding" quickly, but has finally done what I wonder.

  Hello

  Try in a new Windows user account,
  If it works fine, then you can import evrything in it. Srikanth Bidnoorkar, using Vista Ultimate x 86 SP2, Office 2010 x 86-based Quad Q6600 2.4 GHz, 4 GB of RAM, disk HARD 360 x 1 & 320 x 2.

• Right-click for slow response

  I recently started to feel a slow response for right click commands, usually they would "hang" for 3 to 6 minutes. I have seen similar posts and followed the instructions with the following results:

  1. started in Mode safe: the first right-click had a delay of 30 seconds, after the reaction was instant
  2. clean Booted: followed all instructions to eliminate stray services, found nothing specific but the right click to answer somehow reduced to 30-40 seconds
  3 Ran SFC: no problems not reported

  Now, the period is reduced to 20-30 seconds, but it is still longer than before.

  This problem started a week ago and gradually got behind more long until he was sometimes 6 minutes or more. I'm stubborn me for the delay. Once the pop-up window opens hit does not remove it, there's still 2 or 3 minutes. During this time the office is "frozen". Inatalling Service Pack 1 did not immediately solve the problem, and I did a full scan with Kaspersky showing no infection.

  ASUS K52F laptop computer with Intel Core i5 processor 2, 67GHz, 4 GB RAM, 64-bit (less than 3 months)

  Hello
   
  You can view the link try the steps and check if this gives you a likely solution.
   
  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/84875a10-663a-40b8-AAC8-87d64473b0b6/
   
  Warning: Microsoft offers no assurance or warranty, implied or otherwise and is not responsible for the download you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.
   
   
   
  I hope this helps.
   

• 2724 slow response time

  One 2724 PowerConnect

  -Managed

  -IP: 192.168.10.42

  -No LAG

  -No VLAN

  From a computer, I can another computer and receive the following: everything is fast.

  Reply from 192.168.10.105: bytes = 32 time<1ms ttl="">

  Reply from 192.168.10.105: bytes = 32 time<1ms ttl="">

  Reply from 192.168.10.105: bytes = 32 time<1ms ttl="">

  Reply from 192.168.10.105: bytes = 32 time<1ms ttl="">

  When I ping the real switch I get the following: slow response.

  Reply from 192.168.10.42: bytes = 32 time = 235ms TTL = 128
  Reply from 192.168.10.42: bytes = 32 time = TTL = 128 374ms
  Reply from 192.168.10.42: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.10.42: bytes = 32 time = 140ms TTL = 128

  Why this delay?  What could be causing it?

  
  

• Someone knows the extremely slow response and delay with "not responding" on more complex web pages after installing updates on Friday?

  Since the installation of 16 Nov received security patches I've known really slow response with Internet Explorer; 2 minutes between web pages on my WIN7 Pro PC and not much better on my VISTA Business PC.  I get expired on complex web pages the context comes up with "program addresses not" or the pop-up at the bottom of the screen asking me to do it again.  The problem is not limited to Internet Explorer, but also prevents Safari to come.   I tried to reinstall WIN7 Pro, but the problem remains.  I'm also not able to run You Tube or other videos.  There is no download or updated or running Belarc Advisor Windows installation problems.  While the problem occurs with Yahoo Mail, it is not an impact send/receive in Outlook.  Does not appear to impact, nothing other than browsing the web.

  Hi ephd,.

  Thanks for posting in Microsoft Communities. The problem description, I understand that the internet works slowly. Provide the following information:

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Internet Explorer is slow? 5 things to try

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  You can see these articles for more information:

  Why is my Internet connection so slow?

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• New machine install, terribly slow response

  I hope someone can shed some light here, I recently built a new NLE for CS5.5 and the thing incredibly slow to load, encode or even responding to an export order.

  A few specs on the new machine:

  Dual Xeon 3.47 GHz 6 core CPU, total 12 hearts, in total 24 logical cores

  Supermicro X8DTL motherboard, intel 5500 chipset

  Registered 24GO RAM in triple channel mode

  Win7 Pro 64 bit with all updates

  Matrox MXO2 capture/playback

  NVIDIA GTX 580 4 GB video card

  Intel LSI MegaRaid SATA raid controller

  Matrix RAID 5 7TB on the RAID card

  Installed software is 5.5 CS suite, Avira anti virus and the Firefox web browser.  In addition, it is a clean installation

  Now for my problems.

  First usually takes about 2 minutes to load from the desktop and is slow to respond after that.  I loaded a second HD 40 consisting of 2 video clips XDCAM HD timeline and a piece of stereo music.  When I export this simple timeline it takes 3 minutes for encoding options to appear, and then once I selected BluRay HD for the screening and the queue, it takes 3 minutes before the launch of Media Encoder.  At the time I write this Media Encoder has been coding for 30 minutes and it is only about 50% done with this second 40 timeline.  For comparison, my old laptop dual core with its unique internal drive takes about 30 seconds to launch the first (CS4 in it's case) and it encodes the same timeline in 4 minutes approximately.

  Something is very wrong here; I hope it is something simple like a bad setting.  The computer itself seems to work very well, and index Windows benchmarks 7.8 outside a C drive slower, to settle at 6.  All material of the project is on the RAID and the programs and the BONES are on the C drive.  Someone at - it ideas?  I'll have to get started on a great project soon and I can't imagine doing on this machine as it is.

  Scott Cooper

  Seehorse video

  Well, I'm getting there with the support of Matrox.  The horribly slow response seems to be largely corrected by disabling the sound surround in the encoder as detailed here:

  "If you find that the switching export format in the export settings dialog box.
  box sometimes takes a lot of time, such that when you switch from Microsoft
  AVI in MPEG2-DVD, rename the SurCodeWrapper.vca file on your system
  (for example, rename the SurCodeWrapper.vca.bak file). This file is
  usually installed by Adobe Premiere Pro in the following folders:
  $ Files\Adobe\Adobe first Pro CS5\MediaIO\codecs\
  $ Files\Adobe\Adobe Media encode CS5\MediaIO\codecs\
  Be aware that after you rename the SurCodeWrapper.vca file, you will not be able
  to export the audio SwCode Dolby Digital, but you will still be able to export
  Audio Dolby. (Ref # 55279 and Adobe Ref # 2603943) ».

  Fortunately, I didn't need a surround sound, I'm not really thrilled to have to eliminate option however.  I still have a few other questions; I hope that I will get to the bottom of them as well.  Oh, I found MAJOR problems with the latest Nvidia drivers, causing a complete corruption of the video screens.  Roll back to version 280.26 solved these problems.

• MacBook running slow. Help, please.

  EtreCheck version: 3.0.2 (306)

  Report generated 2016-08-28 18:49:54

  Download EtreCheck from https://etrecheck.com

  Duration 44:51

  Performance: Poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Mac is very slow.

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.6 15G (31) - since the start time: about 2 days

  Disc information: ⓘ

  TOSHIBA MK5065GSXF disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 498,88 (Go 188,99 free)

  Storage of carrots: disk0s2 499.25 GB Online

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  SAMSUNG SAMSUNG_Android

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/hosts - Count: 30

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  / Library/LaunchDaemons/com. Extreme.NacAgent.plist

  / Library/PrivilegedHelperTools/com. Extreme.NacAgent

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  / System/Library/Extensions

  [loading] com.devguru.driver.SamsungComposite (1.4.28 - 10.6 SDK - 2016-08-23) [Support]

  /System/Library/Extensions/ssuddrv.kext/contents/plugins

  [loading] com.devguru.driver.SamsungACMControl (1.4.28 - 10.6 SDK - 2015-01-13) [Support]

  [loading] com.devguru.driver.SamsungACMData (1.4.28 - 10.6 SDK - 2015-01-13) [Support]

  [loading] com.devguru.driver.SamsungMTP (1.4.28 - SDK 10.5 - 2015-01-13) [Support]

  com.devguru.driver.SamsungSerial [no charge] (1.4.28 - 10.6 SDK - 2015-01-13) [Support]

  Startup items: ⓘ

  HWNetMgr: Path: / Library/StartupItems/HWNetMgr

  ProTec6b: Path: / Library/StartupItems/ProTec6b

  StartOuc: Path: / Library/StartupItems/StartOuc

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [cannot] com.apple.cloudphotosd.plist (2015-10-09)

  [cannot] com.apple.photolibraryd.plist (2015-10-09)

  [no charge] 7 tasks Apple

  tasks of Apple 155 [loading]

  tasks of Apple 74 [performance]

  Launch system demons: ⓘ

  [no charge] 47 Apple jobs

  [loading] 154 jobs Apple

  tasks of Apple 89 [running]

  Launch officers: ⓘ

  [performance] HWPortCfg.plist (2014-06-06) [Support]

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2012-08-21) [Support]

  [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-03-20) [Support]

  [loading] com.adobe.CS5ServiceManager.plist (2012-08-21) [Support]

  [loading] com.citrix.AuthManager_Mac.plist (2013-06-08) [Support]

  com.citrix.ReceiverHelper.plist [running] (2013-06-08) [Support]

  com.citrix.ServiceRecords.plist [running] (2013-06-08) [Support]

  com.Google.keystone.agent.plist [running] (2016-07-12) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2015-04-18) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-03-20) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-03-20) [Support]

  [loaded] com.adobe.SwitchBoard.plist (2012-08-21) [Support]

  [loading] com.adobe.fpsaud.plist (2016-06-29) [Support]

  [loading] com.apple.aelwriter.plist (2012-08-21)

  [loading] com.extreme.NacAgent.plist (2016-03-21) [Support]

  [loading] com.google.keystone.daemon.plist (2016-07-12) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2015-03-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2015-04-18) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2012-08-22) [Support]

  [cannot] com.adobe.ARM. [...]. plist (2013-08-09) [Support]

  [loading] com.divx.agent.postinstall.plist (09 / 09/2012) [Support]

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-18) [Support]

  Default browser: 601 - SDK 10.11 (2016-08-23)

  Flip4Mac WMV Plugin: 2.2.3.7 (2009-05-22) [Support]

  AdobePDFViewerNPAPI: 15.009.20069 - SDK 10.8 (2015-10-01) [Support]

  FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-08-26) [Support]

  DivXBrowserPlugin: 2.2 (2012-07-27) [Support]

  QuickTime Plugin: 7.7.3 (2016-08-23)

  Flash Player: 22.0.0.209 - SDK 10.9 (2016-08-26) [Support]

  CitrixICAClientPlugIn: 11.8.0 - SDK 10.7 (2013-06-08) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-12) [Support]

  AdobePDFViewer: 15.009.20069 - SDK 10.8 (2015-10-01) [Support]

  SharePointBrowserPlugin: 14.5.7 - SDK 10.6 (2015-11-08) [Support]

  JavaAppletPlugin: Java 8 update 101 build 13 (2016-07-30) check the version of

  User Plug-ins internet: ⓘ

  Picasa: 1.0 - 10.4 SDK (2013-10-06) [Support]

  3rd party preference panes: ⓘ

  Flash Player (2016-06-29) [Support]

  Flip4Mac WMV (2009-05-22) [Support]

  Growl (2012-08-21) [Support]

  Java (2016-07-30) [Support]

  Paragon NTFS for Mac® OS X (2011-05-05) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  1% sysmond

  0% kernel_task

  Activity monitor 0%

  0% cloudpaird

  Top of page process of memory: ⓘ

  506 MB kernel_task

  Com.apple.WebKit.WebContent (3) 475 MB

  Overview of 459 MB

  Safari of 127 MB

  Softwareupdated 111 MB

  Virtual memory information: ⓘ

  89 MB free RAM

  3.91 GB of used RAM (799 MB Cache)

  46 MB used Swap

  Diagnostic information: ⓘ

  August 26, 2016, 21:24:24 Self test - passed

  August 26, 2016, 18:59:39 ~/Library/Logs/DiagnosticReports/suggestd_2016-08-26-185939_[redacted].crash

  /System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/ suggestd

  Start 4 option on the partition recovery and in the menu select disk utility.  Run disk utility > first aid.

  Ciao.

• MacBook Pro slows down to a halt when plugged via magsafe.

  Hey guys.

  I had this strange problem lately, which started about 2 weeks ago.

  My Macbook Pro works perfectly as it is not plugged into the magsafe adapter.

  At the time wherever he is plugged in, it slows down to almost a halt with hiccups etc beach ball. From the MBP place goes from 15 to 20 seconds (unplugged) to 3-5 minutes (connected with magsafe)

  Now, I thought initially it was a hardware problem, but then I did a complete reformat and reinstall:

  I actually did 3 reformats full (the first two I have zero'ed my data) AND reset the SMC and the PRAM twice:

  The first reformat and reinstall brought back my MBP of El capitan to Snow Leopard. Meanwhile, first to reformat and reinstall the system, it may have showed signs of it still be afflicted by this slowness and beach ball gasp he showed before the reformat and reinstall. I kept the first reformat and reinstall for maybe 30 minutes in which I decided to reformat and reinstall once again, that I did not like the name of the Home folder.

  The second reformat and reinstall, I did notice one problem with the system, in fact it was running flawless both disconnected and connected via magsafe. I pulled up to the PS4 and played a few BF4 while I downloaded and reinstalled all the updates, then I upgraded to El Capitan. After all was said and done, I was reading how you can do a clean install of El Capitan via a USB port. I wanted to try this, so I downloaded a copy of El Capitan to a USB stick with the manufacturer of disc X and a then reformat (no zero out as starting program with El Capitan does not have it), and did a clean install of El Capitan.

  I didn't restore from back up or anything, the only thing I did was download all my iCloud data, like photos and songs etc. My system worked perfectly for about a week since the reformatting and reinstalling. He had no problem with the connected system or not.

  Now, a week later, the same problem slipped immediately came out of nowhere and the system works like crap when it is plugged. It takes 3-5 minutes to start, instead of 15 to 20 seconds when it is not plugged in. Also keep in mind, this is a new reinstall where I don't have any what garbage on my system. I didn't yet to reinstall all the games on my MBP, or anything like that, and in my opinion, this is one very bare reinstall OS. The total memory used is like 150 concerts against 350 before my first reformat and reinstall.

  So, I'm to the point where I'm racking my brain trying to figure out whether it is a hardware problem. Since the system ran a good week without this post question reformat and reinstall, it makes me doubt that it is a hardware problem. But on the flip side, since I did a reformat and reinstall, it can't be a problem of software either, especially since I didn't install anything the night before this problem appeared.

  My only hope to address this problem is I hope one of you had the same problem and have a solution. If not, it seems that I might need to get a new MBP this fall, which would be a shame this system ran flawlessly and fluidly before this annoying problem.

  Thanks in advance for any input.

  Since you mentioned the snow leopard, I understand that the MBP is an older model (2009 or almost?)... What is the status of the battery? https://support.Apple.com/en-us/HT201585