MacBook pro working in SafeMode only yosemite
I mac book pro Yosemite 10.10.5 working in safe mode only crashes after 3-4 hours in safe mode but when I start in normal mode lock on the apple logo every time. help me
The problem persists in safe mode, but later, it's almost certainly a hardware problem. Have you tried the hardware test: using Apple Hardware Test - Apple Support?
Tags: Mac OS & System Software
Similar Questions
-
MacBook pro work leave because of pulled and broken wire. I took out the hard drive. the hard drive has all my files that I wouldn't need to clear all of the other personal files?
It does not start to the top, screen and hardware ok except belt disconnected.
also can I sell adapter, brand new, never used. where can I sell?
Hi Wally, the hard disk OS X and all of your files. Get a case for your reader, and it backs up. Try OWC
Always keep your Mac backed up on an external drive with Time Machine or utility of cloning like SuperDuperor double clone.
Try eBay for the adapter.
-
I bought items at Best Buy December 14, 24. I'm trying to use it on a MacBook Pro OSx 10.10.5 (Yosemite). While I try to put in place, I could get the serial number, but when I type in Adobe says that it cannot validate it. That is what it is?
you have a number of redemption? If so, https://redeem.licenses.adobe.com/getserial
If your redemption number is reported as invalid, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html
If you have a serial number, install your software using this serial number.
-
MACBOOK PRO 2015 WIFI UNPLUG SLEEP YOSEMITE EL CAPITAN HELP :/
Hello, I recently bought a new macbook pro 2015 13.3 inch edition last month and when I close the lid of the screen or put my laptop to sleep and wake up the display of my network settings says that my wifi is connected but webpages in safari and other features of the internet do not work and I need to activate the wifi and turn it back on and it works again. I tried absolutely everything already to try to solve the problem as reseting; Landau, MSC, deleting of plist files, remove and reset pefferred adding new location and reset service order, pure networks install of El Capitan 10.11 and upgrade 10.11.2 and even get my card replaced airport and macbook pro replaced shorty after. Until I replaced it, it ran from El Capitan. And now the replaced macbook pro is running Yosemite 10.10.5 and the problem is still there.
I found has temporarily solution which was to download nosleep Yosemite version extension program that disables the function sleep at all times, but eventually it will damage my screen. I would like to know if anyone finds a solution for this problem? My wifi works fine on all my other devices such as my: 2 pc, chrome book, iPad and iPhone. It gives just problems on my macbook pro only. Everyone knows about this problem? And did you find a good solution that I have not mentioned? also I have Time Warner Cable and I have a 2 in 1 router modem by model Arris DG1670A which has 2.4 and 5 G-banding and the problem occurs on both frequencies. I have also the 300/20 DL / plan UL which allows to connect more devices to the internet if that helps. I tried my macbook pro on a neighbors WiFi and on connecting wifi apple store it does not disconnect and worked correctly, but I did not try it long determine if it worked well.
IM thinking of buying an other internet router modem but I don't want to spend the money if its will not solve the problem and that this problem cannot be resolved it would be wise to return my macbook pro?
Hello NYFAME,
Thank you for using communities Support from Apple!
I understand that you have unexpected drops wireless connection when your Mac wakes up from sleep. It seems that you are connected, but you cannot connect to the internet.
To begin troubleshooting of this situation, I suggest to use Wireless Diagnostics to help you identify and resolve any potential problems.
Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support
See you soon!
-
Former Cinema Display, newish MacBook Pro work?
I have an old Apple Cinema Display Monitor (2003) which includes a cord where it receives power, USB and DVI video. He has been connected to a G4 tower forever. Now, I have a MacBook Pro newish (2013) which was love at first sight. I can hang it up the screen? This adapter they do? What is it? I thought it would be just a shot of lightning/DVI, but it's not. Any help is appreciated. Thank you.
Lightning/DVI should operate. DVI should be the same for any enabled DVI monitor made in the last 15 years, simply check the adapter type, there were several arrangements of unique PIN to DVI connectors over the years.
-
13 "Macbook Pro (mid-2012) starts only in safe mode.
My macbook OS 10.11.4 recently close and wouldn't turn on after an electrical fault at the club I was DJing. The next morning, I disconnected the battery and plugged it back. When I turned on the PC, he gave the kernel panic and would only turn on in safe mode. I tried to go to recovery (command-R) mode, but that does nothing, when I start my computer.
What happens here? How can I fix? Help, please
These must be run as administrator. If you have only one user account, you are the administrator.
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSIS AND diagnostic USE information reports ▹ System
(not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.
If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.
In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "
Please do not post other types of diagnostic report.
I know that the report is long, perhaps several hundred lines. Please report all this anyway.
When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
MacBook Pro 10.10.5 OSX Yosemite 2GHx processor intel core
Tried to clean my boot drive for more space, UsingClean Genius Pro and more following the manual directions relative to the removal of unwanted files. My hard drive now sits on my desk and I want to remove it
Finder > Preferences > General > hard drive > deselect which
-
MacBook pro works well in safe mode but freezes in normal mode
Now I'm in safe mode, but if I restart in normal mode. It freezes.
I have chosen of all the startup items.
I ran the diagnostic test suggested by Linc Davis report.
Start time: 10:29:16 04/30/16
Model identifier: MacBookPro11, 1
The system version: OS X 10.11.4 (15E65)
Kernel version: Darwin 15.4.0
Start mode: security
Integrity of system protection: enabled
Since the starting time: 10 minutes
FileVault: on
Diagnostic reports
2016-04-06 CudaDriveInstall crash
2016-04-06 GoogleTalkPlugin crash
2016-04-06 IMDPersistenceAgent crash x 2
2016-04-06 ReportCrash crash
2016-04-06 cloudd crash
2016 04-06 com.apple.CommerceKit.TransactionService crash
2016-04-06 recentsd x 5 accident
2016 04-06 suggestd accident x 5
Crash of Microsoft Error Reporting 2016-04-12
2016 04-27 com.apple.WebKit.WebContent crash
Journal
30 Apr 09:13:45 init: error getting of PHY_MODE; using MODE_UNKNOWN
30 Apr 09:13:46 en0: antenna diversity (index = - 1) Configuration error.
30 Apr 09:13:46 en0: configuration of error transmission antenna (index = - 1).
30 Apr 09:48:26 launchd process [1]-l' system of limitation of disabling i/o level
30 Apr 09:48:26 launchd process [1] disable the CPU - the system-wide limit
30 Apr 09:53:06 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785
30 Apr 09:53:12 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x30684b4c8b15bb07, the provider is 0x30684b4bcb530207
30 Apr 09:53:12 init: error getting of PHY_MODE; using MODE_UNKNOWN
30 Apr 09:53:13 en0: antenna diversity (index = - 1) Configuration error.
30 Apr 09:53:13 en0: configuration of error transmission antenna (index = - 1).
30 AVR 10:16: 15 launchd process [1]-l' system of limitation of disabling i/o level
30 AVR 10:16: 15 launchd process [1] disable the CPU - the system-wide limit
30 AVR 10:17: 41 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785
30 AVR 10:17: 47 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0xaba80277a3767cd9, the provider is 0xaba80276e3f4a6d9
30 AVR 10:17: 47 init: error getting of PHY_MODE; using MODE_UNKNOWN
30 AVR 10:17: 47 en0: antenna diversity (index = - 1) Configuration error.
30 AVR 10:17: 47 en0: configuration of error transmission antenna (index = - 1).
30 AVR 10:17: 51 SIOCPROTODETACH_IN6: error utun0 = 6
30 AVR 10:19: 59 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785
30 AVR 10:19: 59 jnl: b (1, 4): replay_journal: from: 16072192 to: 3949056 (joffset 0 x 19502000)
30 AVR 10:19: 59 jnl: b (1, 4): rereading of newspaper.
30 AVR 10:20: 05 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x79b5767eccf49abf, the provider is 0x79b5767e0d328ebf
30 AVR 10:20: 05 init: error getting of PHY_MODE; using MODE_UNKNOWN
30 AVR 10:20: 05 en0: antenna diversity (index = - 1) Configuration error.
30 AVR 10:20: 05 en0: configuration of error transmission antenna (index = - 1).
Demons
com Apple.Installer.osmessagetracing
launchd
/ System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist
-com.apple.installer.osmessagetracing
/ Library/LaunchAgents/com. Cisco.AnyConnect.gui.plist
-com.cisco.anyconnect.gui
/ Library/LaunchAgents/com. Dell.Scan.Dell2155ColorMFP.ButtonListenerAgent.plist
-com.dell.scan.Dell2155ColorMFP.ButtonListenerAgent
/Library/LaunchAgents/com.Google.keystone.agent.plist
-com.google.keystone.system.agent
/Library/LaunchAgents/com.TeamViewer.TeamViewer.plist
-com.teamviewer.teamviewer
/Library/LaunchAgents/com.TeamViewer.teamviewer_desktop.plist
-com.teamviewer.desktop
/Library/LaunchDaemons/com.Adobe.fpsaud.plist
-com.adobe.fpsaud
/ Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist
-com.apple.installer.osmessagetracing
/ Library/LaunchDaemons/com. Cisco.AnyConnect.vpnagentd.plist
-com.cisco.anyconnect.vpnagentd
/Library/LaunchDaemons/com.cudadrive.cudadrivesvcd.plist
-com.cudadrive.cudadrivesvcd
/Library/LaunchDaemons/com.Google.keystone.daemon.plist
-com.google.keystone.daemon
/ Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist
-com.microsoft.office.licensing.helper
/Library/LaunchDaemons/com.TeamViewer.helper.plist
-com.teamviewer.Helper
/Library/LaunchDaemons/com.TeamViewer.TeamViewer_Service.plist
-com.teamviewer.service
Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist
-com.citrixonline.GoToMeeting.G2MUpdate
Beams
/System/Library/Extensions/JMicronATA.kext
-com.jmicron.JMicronATA
/ / Library/Internet Plug-Ins/Flash Player.plugin
S/O
/ Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
-com.google.googletalkbrowserplugin
/ Library/Internet Plug-Ins/o1dbrowserplugin.plugin
-com.google.o1dbrowserplugin
/ / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
-com.microsoft.sharepoint.browserplugin
/ / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
-com.microsoft.sharepoint.webkitplugin
/ / Library/Internet Plug-Ins/Silverlight.plugin
-com.microsoft.SilverlightPlugin
/ Library/PreferencePanes/Dell 2155 Color MFP.prefPane
-com.dell.scan.Dell2155ColorMFP.prefPanel
/ Library/PreferencePanes/Flash Player.prefPane
-com.adobe.flashplayerpreferences
/Library/security/SecurityAgentPlugins/TeamViewerAuthPlugin.bundle
-com.teamviewer.AuthorizationPlugin
/ Library/Widgets/Status Monitor.wdgt
-com.dell.print.statusmonitor.widget
Library/Address Book Plug-Ins/SkypeABDialer.bundle
-com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
-com.skype.skypeabsms
/ Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
-com.citrixonline.mac.WebDeploymentPlugin
Content of/etc/hosts
127.0.0.1 localhost
255.255.255.255 broadcasthost
: 1 localhost
Content of /etc/pf.conf
scrub-anchor "com.apple / * '.
NAT-anchor "com.apple / * '.
RDR-anchor "com.apple / * '.
dummynet-anchor "com.apple / * '.
Anchor "com.apple / * '.
load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".
Content of/etc/syslog.conf
install.* @127.0.0.1:32376
Content of /etc/pam.d/authorization
Pam_krb5.so AUTH optional use_kcminit use_first_pass
AUTH pam_ntlm.so optional use_first_pass
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
Content of /etc/pam.d/checkpw
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so no_check_home no_check_shell
Content of /etc/pam.d/chkpasswd
AUTH required pam_opendirectory.so
account required pam_opendirectory.so
password required pam_permit.so
session required pam_permit.so
Content of /etc/pam.d/cups
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Content of /etc/pam.d/ftpd
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Contents of /etc/pam.d/login
Pam_krb5.so AUTH optional use_kcminit
AUTH pam_ntlm.so optional try_first_pass
AUTH pam_mount.so optional try_first_pass
AUTH required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
session required pam_uwtmp.so
session pam_mount.so in option
Content of /etc/pam.d/login.term
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_uwtmp.so
Content of /etc/pam.d/other
AUTH required pam_deny.so
pam_deny.so account required
password required pam_deny.so
session required pam_deny.so
Content of /etc/pam.d/passwd
AUTH required pam_permit.so
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_permit.so
Content of /etc/pam.d/rshd
AUTH required pam_permit.so
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_launchd.so
Content of /etc/pam.d/screensaver
Pam_krb5.so AUTH optional use_kcminit use_first_pass
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
account sufficient pam_self.so
Group accounts required pam_group.so no_warn = admin, wheel fail_safe
account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe
Content of /etc/pam.d/smbd
account of the sacl_service pam_sacl.so = allow_trustacct smb
session required pam_permit.so
Content of /etc/pam.d/sshd
Pam_krb5.so AUTH optional use_kcminit
AUTH pam_ntlm.so optional try_first_pass
AUTH pam_mount.so optional try_first_pass
AUTH required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account of the sacl_service pam_sacl.so = ssh
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
session pam_mount.so in option
Content of /etc/pam.d/su
AUTH sufficient pam_rootok.so
AUTH required pam_opendirectory.so
Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe
no_check_shell account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
Content of /etc/pam.d/sudo
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Content of /etc/periodic/daily/110.clean-tmps
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_tmps_enable' in
[AA] [Ee] [Ss])
If [-z "$daily_clean_tmps_days"]
then
echo ' $daily_clean_tmps_enable is defined, but '.
"$daily_clean_tmps_days is not.
RC = 2
on the other
ECHO «»
echo "deleting old temporary files:
Set f noglob
args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""
args = "${args} - ctime + $daily_clean_tmps_days.
dargs = "- empty - mtime + $daily_clean_tmps_days"
dargs = "${dargs}! "- name .vfs_rsrc_streams_."
[n "$daily_clean_tmps_ignore"] & & {}
args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "
sed / [] [] * / ! -name/g "
dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "
sed / [] [] * / ! -name/g "
.. .and 21 more line (s)
Content of /etc/periodic/daily/130.clean-msgs
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_msgs_enable' in
[AA] [Ee] [Ss])
If [! d/var/msgs]
then
echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.
"does not exist".
RC = 2
on the other
ECHO «»
echo "cleaning of the old ads system:
[n '$daily_clean_msgs_days'] & &
ARG =-${daily_clean_msgs_days #-} | ARG =
GSM-c $arg & & rc = 0 | RC = 3
FI;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/140.clean-rwho
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_rwho_enable' in
[AA] [Ee] [Ss])
If [-z "$daily_clean_rwho_days"]
then
echo ' $daily_clean_rwho_enable is activated but '.
"$daily_clean_rwho_days is not defined.
RC = 2
Elif [! d/var/rwho(1)]
then
echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------
"does not exist".
RC = 2
on the other
ECHO «»
echo "deleting obsolete files in/var/rwho(1):
case '$daily_clean_rwho_verbose' in
[AA] [Ee] [Ss])
print = -.
*)
print =;
.. .and 14 more line (s)
Content of /etc/periodic/daily/199.clean-fax
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
If [/ var/spool/fax - d]; then
ECHO «»
echo "deleting files fax scratch."
CD/var/spool/fax & & \
To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"
FI
Content of /etc/periodic/daily/310.accounting
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_accounting_enable' in
[AA] [Ee] [Ss])
If [!] ACCT - f]
then
echo '$daily_accounting_enable has the value but ACCT '.
"does not exist".
RC = 2
Elif [-z "$daily_accounting_save"]
then
echo ' $daily_accounting_enable is defined, but '.
"$daily_accounting_save is not.
RC = 2
on the other
ECHO «»
echo "accounting log rotation and collection of statistics:
CD/var/account
RC = 0
n = $daily_accounting_save
RM f ACCT. $ ACCT n.gz. $n || RC = 3
m = $n
.. .and 18 several line (s)
Content of /etc/periodic/daily/400.status-disks
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_disks_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "record status:
DF $daily_status_disks_df_flags & & rc = 1 | RC = 3
;;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/420.status-network
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_network_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "State of the network interface:
case '$daily_status_network_usedns' in
[AA] [Ee] [Ss])
netstat-i & & rc = 0 | RC = 3;
*)
netstat - in & & rc = 0 | RC = 3;
ESAC;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/430.status-rwho
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_rwho_enable' in
[AA] [Ee] [Ss])
RWHO(1) = $(echo/var/rwho / *)
If [f ' ${rwho(1) % *} "]
then
ECHO «»
echo "the system of Local network status:
PROG = ruptime
on the other
ECHO «»
echo "Local System State:
PROG = running time
FI
RC = $($prog | tee/dev/stderr | wc-l)
If [$?-eq 0]
then
[$rc - gt 1] & & rc = 1
on the other
RC = 3
FI;
.. .and 3 more lines
Content of /etc/periodic/daily/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $daily_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Content of /etc/periodic/monthly/199.rotate-fax
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
ECHO «»
printf %s "rotation of the fax log files:
CD/var/log/fax
I'm in * .log; do
If [f ' ${i} "]; then
echo-n "$i".
If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI
If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI
If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI
If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI
If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI
If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. DIY FI
Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".
FI
fact
ECHO «»
Content of /etc/periodic/monthly/200.accounting
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
oldmask = $(umask)
umask 066
case '$monthly_accounting_enable' in
[AA] [Ee] [Ss])
W = / var/log/wtmp
RC = 0
Remove = NO
If [$rc - eq 0]
then
ECHO «»
echo "doing the accounting of connection:
RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)
[$rc - gt 0] & & rc = 1
FI
[$remove = YES] & & rm-f $W.0;
*) rc = 0;
ESAC
umask $oldmask
output $rc
Content of /etc/periodic/monthly/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $monthly_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Content of /etc/periodic/weekly/320.whatis
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$weekly_whatis_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "reconstruction whatis database:
MANPATH ='/ usr/bin/manpath - q'
If [$? = 0]
then
If [-z "${MANPATH}"]
then
echo "manpath impossible to find directories manpage.
RC = 3
on the other
RC = 0
/usr/libexec/makewhatis.local "${MANPATH}" | RC = 3
If [X "${man_locales}"! = X]
then
I'm in ${man_locales}
do
LC_ALL = $i /usr/libexec/makewhatis.local - a------.
-L "${MANPATH}" | RC = 3
.. .and 9 more line (s)
Content of /etc/periodic/weekly/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $weekly_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)
<? XML version = "1.0" encoding = "UTF-8"? >
<! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""
< plist version = "1.0" >
< dict >
< key > UnrestrictSpotlightContainerScope < / key >
< true / >
< / dict >
< / plist >
Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)
<? XML version = "1.0" encoding = "UTF-8"? >
<! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""
< plist version = "1.0" >
< dict >
Flags kernel < key > < / key >
< string > < / string >
< / dict >
< / plist >
Featured: indexing and search disabled
Firewall: on
Small files: 43
Time elapsed (s): 272
If it works in Mode safe, look in system preferences > users and groups > login items and delete items from opening of any third party. Also look in Library/StartupItems. Nothing is put in this folder by default, so something in here belongs to you. Then log out and back in or restart and test.
-
MacBook pro 2010 fresh only when off...
I have a macbook pro mid-2010 and only the cool when turned off. Turned on, the green light stops and off, green / yellow begins.
This isn't a problem... But when the power is connected, the power source said only battery, no charger.
I tried another charger, same result, reset the SMC, PRAM.
What I would like is that it only works on power, not battery.
No spill, shock. no damage, regular use etc. Thank you!
Model name: MacBook Pro Model identifier: MacBookPro7, 1 Processor name: Intel Core 2 Duo Processor speed: 2.4 GHz Number of processors: 1 Total number of cores: 2 L2 Cache Memory: 3 MB Memory: 4 GB Bus speed: 1.07 GHz Boot ROM version: MBP71.0039.B0E Version of the SCM (System): 1.62f7 Serial number (System): W8018TZQATM Material UUID: 5BF111D1-C45D-59FA-A7AE-36C06F10AEDC Motion sensor sudden:
State: Activated Maybe your charger but probably your battery.
Can you post this screen shot of SystemInformation please:
-
I bought the product, have a serial number, and when I go to install from a superdrive drive, he told me that my serial number is not valid. I have a MacBook Pro 2013 and it running Yosemite 10.10.5
Thank you much for the help!
Jericho
Please see the links below.
Hope this will help you.
Kind regards
Hervé Khare
-
MacBook Pro slows down to a halt when plugged via magsafe.
Hey guys.
I had this strange problem lately, which started about 2 weeks ago.
My Macbook Pro works perfectly as it is not plugged into the magsafe adapter.
At the time wherever he is plugged in, it slows down to almost a halt with hiccups etc beach ball. From the MBP place goes from 15 to 20 seconds (unplugged) to 3-5 minutes (connected with magsafe)
Now, I thought initially it was a hardware problem, but then I did a complete reformat and reinstall:
I actually did 3 reformats full (the first two I have zero'ed my data) AND reset the SMC and the PRAM twice:
The first reformat and reinstall brought back my MBP of El capitan to Snow Leopard. Meanwhile, first to reformat and reinstall the system, it may have showed signs of it still be afflicted by this slowness and beach ball gasp he showed before the reformat and reinstall. I kept the first reformat and reinstall for maybe 30 minutes in which I decided to reformat and reinstall once again, that I did not like the name of the Home folder.
The second reformat and reinstall, I did notice one problem with the system, in fact it was running flawless both disconnected and connected via magsafe. I pulled up to the PS4 and played a few BF4 while I downloaded and reinstalled all the updates, then I upgraded to El Capitan. After all was said and done, I was reading how you can do a clean install of El Capitan via a USB port. I wanted to try this, so I downloaded a copy of El Capitan to a USB stick with the manufacturer of disc X and a then reformat (no zero out as starting program with El Capitan does not have it), and did a clean install of El Capitan.
I didn't restore from back up or anything, the only thing I did was download all my iCloud data, like photos and songs etc. My system worked perfectly for about a week since the reformatting and reinstalling. He had no problem with the connected system or not.
Now, a week later, the same problem slipped immediately came out of nowhere and the system works like crap when it is plugged. It takes 3-5 minutes to start, instead of 15 to 20 seconds when it is not plugged in. Also keep in mind, this is a new reinstall where I don't have any what garbage on my system. I didn't yet to reinstall all the games on my MBP, or anything like that, and in my opinion, this is one very bare reinstall OS. The total memory used is like 150 concerts against 350 before my first reformat and reinstall.
So, I'm to the point where I'm racking my brain trying to figure out whether it is a hardware problem. Since the system ran a good week without this post question reformat and reinstall, it makes me doubt that it is a hardware problem. But on the flip side, since I did a reformat and reinstall, it can't be a problem of software either, especially since I didn't install anything the night before this problem appeared.
My only hope to address this problem is I hope one of you had the same problem and have a solution. If not, it seems that I might need to get a new MBP this fall, which would be a shame this system ran flawlessly and fluidly before this annoying problem.
Thanks in advance for any input.
Since you mentioned the snow leopard, I understand that the MBP is an older model (2009 or almost?)... What is the status of the battery? https://support.Apple.com/en-us/HT201585
-
FCP7 will not migrate to the new Macbook Pro
I am running FCP7 on a Macbook Pro OS 10.10.5 Yosemite. Recently my GPU Macbook died, if I swapped my hard drive in a new machine. All my programs and preferences and settings appear to have migrated EXCEPT fine, FCP. When I try to open it, I get a prompt for the serial No. I put in the serial and message 777 n. "'I don't have the original disks so cannot do a re-install, just write down the series.
I just try to open the program in order to convert the project files in XML format and open them in first.
Any tips?
Wait... did you install the drive in another computer and try to boot from this drive? Or did you mount it and try to migrate applications off of it?
FCP 7 do not migrate. He moved around the library and file system, those who are not returned when migrate you, so many critical parts of the PCF are not reduced. The only solution is that you can not do... install the installer DVD.
Sorry man.
I've migrated to a new laptop, now FCP Studio 3 will not take my serial - unknown error 777
-
MacBook pro gets stuck after 6 minutes
I got my MacBook Pro for about 4 years. Everything was fine until a few months ago. There is some ongoing work on utilities in front of my house and the workers accidentally done something to mess up my internet connection - cut a wire or something? In any case, I told them and fixed it. Then, my MacBook Pro started having problems.
It gets hung up or stuck after about 6 minutes of work. It does not seem serious if I work online or offline.
The strange thing is it only happens at my house and it only happens with my MacBook Pro. My iPad and iPhone, both work very well for me. My MacBook Pro works great everywhere else. Other MacBook works very well for me. It of like my MacBook Pro is trying to do something specific, or to run a program only when it is at home and is then stuck.
I took it to the Apple store and a third computer repair place to party, but it still works very well in these places and they do not find what is wrong.
I don't know what to try next.
Help, please!
Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.
-
I have a MacBook Pro and recently upgraded to Yosemite. I used the time Machine before I upgraded. My Seagate 4 T worked very well. Started a back-up and he started to save and quit - Time Machine says something not be checked? and then I noticed that all my files are gone. I have a partition separated for my Time Machine and my photos and they are all gone too. I'm afraid to unplug the Seagate and turned off my Mac. I see that my external hard drive is still partially used in the two partitions. Show my photos in Lightroom with the? Mark and I have gone and looked for the files but cannot find them. Can I stop the external hard drive? Can someone help me?
Your external HARD drive may have failed. Open utility disk, then run first aid > Verify and Repair the disk.
Ciao.
-
New MacBook Pro GPU compatible for playback in Premiere Pro CS6 Mercury engine?
I am considering buying a new MacBook Pro (15 in., processor 2.8 GHz quad-core Intel Core i7, 16 MB of RAM) to mainly video edditing with Premiere Pro, I have the CS6 vertion. I wonder if its Mercury playback engine support GPU?
The laptop I think uses this two graphics cards:
- Intel Pro Iris graphics card
- AMD Radeon R9 M370X with 2 GB of GDDR5 memory
In the list of system requirements for first Pro CS 6; Premiere Pro system requirements for Mac OS and Windows is said "AMD over-pants" recommended for Mac and AMD Radeon GPU Acceleration (as the Mac comes with) is listed under Windows. This makes me wonder if the new Mac support the maximum speed for the Mercury playback engine?
In any case, I would appreciate your views as oppon whitch GPU card you guys recommend for a MacBook Pro work best with Adobe Premiere Pro CS6?
Hello
Only these cards are supported for CS6
- AMD Radeon HD 6750 M (only on some MacBook Pro computers running Mac OS X Lion (10.7.x) with a minimum of 1 GB of VRAM)
- AMD Radeon HD 6770 M (only on some MacBook Pro computers running Mac OS X Lion (10.7.x) with a minimum of 1 GB of VRAM)
Premiere Pro system requirements for Mac OS and Windows
Vinay
Maybe you are looking for
-
iOS is prevents me from doing a purchase repeat, I intend to
I am looking to buy currency for an app. I have already made this purchase in the past, but want to do it again. However, iOS (or the app store) prevents me from purchase to repeat with this error: "this In - App Purchase has already been purchased
-
I tried to update firefox to open a pdf file from a website that says at the top of the page that my plugins are up-to-date.
-
I created my HP Deskjet 3830 yesterday and it worked on wireless connection. At no time was I asked a network security key. A colleague joined today to the home network (yesterday I was myself), and requested a key security network - to my surprise I
-
HP 2000-369 wm note book .wind: Re: Hello am having an administrator password error.
Hello am get password administrator or to a power on password prompt but I don't know what they are.i hit enter 3 times and get a # 79987161 .any suggestions? Thank you
-
Hello I need a driver for USB dongle v1.74 for windows 7 64 bit.