Machine Vista "frequently", but not always, ask user name and password to access the public folders on the XP machine.

Similar Questions

• XDB user name and password to access the page configuration EPG on a pluggable database APEX

  Hello

  I have a base shared of the Oracle (12.1.0.2) 12.

  I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).

  Connected to the PDB, the registry says:

  Name of the ID Version State

  ------------ ----------------------------------- ------------ ----------

  APEX Oracle Application Express 5.0.0.00.31 VALID

  I want to configure the EPG for this PDB.

  I did the following (in this order):

  (1) race: apex_epg_config.sql

  (2) race: exec dbms_xdb.sethttpport (8080) - the firewall is open for this port

  (3) race: change the anonymous user account unlock;

  (4) run:

  Start

  () DBMS_NETWORK_ACL_ADMIN.append_host_ace

  Home = > ' *',

  As = > xs$ ace_type (privilege_list = > xs$ name_list ('connect'),)

  principal_name = > "APEX_050000"

  principal_type = > xs_acl.ptype_db));

  end;

  /

  I find myself with the APEX-based users:

  Account

  Status of user name

  ------------------------- -------------------------

  FLOWS_FILES EXPIRED & LOCKED

  APEX_050000 EXPIRED & LOCKED

  OPEN APEX_REST_PUBLIC_USER

  OPEN ORDS_PUBLIC_USER

  OPEN APEX_PUBLIC_USER

  OPEN APEX_LISTENER

  ORDPLUGINS EXPIRED & LOCKED

  ORDDATA EXPIRED & LOCKED

  ORDSYS EXPIRED & LOCKED

  ANONYMOUS HAS EXPIRED

  ORDS_METADATA EXPIRED & LOCKED

  I used the documentation:

  https://docs.Oracle.com/CD/E59726_01/install.50/e39144/EPG.htm#HTMIG386

  When I run from the browser:

  http:// < IP address of the server >: 8080/apex

  I get the messge:

  "APEX request a user name and password XDB"

  Does someone has encountered this situation in a PDB file?

  Thanks in advance for any information.

  Thanks and greetings

  Hi Patrick,

  Laury wrote:

  I have a base shared of the Oracle (12.1.0.2) 12.

  I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).

  I want to configure the EPG for this PDB.

  I find myself with the APEX-based users:

  Account

  Status of user name

  ------------------------- -------------------------

  ANONYMOUS HAS EXPIRED

  The problem is the ANONYMOUS account has expired.

  Reference: Re: XDB username and password

  I think that this issue is addressed in your previous thread so: Oracle APEX server requires a user name and password of the server said XDB?

  And here's the thread where Jason explained the reasons: Re: installation of the Apex (4.2.2 on 12 c)

  Kind regards

  Kiran

• At the start of webcenter field, how not to enter user name and password?

  Dear all,
  
  I followed this link from http://yonaweb.be/start_webcenter_domain in my field webcenter installation and I managed to put my own webcenter and explore the busy webcenter spaces.
  
  My only concern is that when I start my webcenter field he always asks for the user id and password for the weblogic.
  
  I created a small batch for this file.
  

  call C:\Oracle\Middleware\user_projects\domains\webcenter_domain\bin\startManagedWebLogic.cmd WC_Spaces http://localhost:7001

  But how do I get away from type the user id and password?
  
  Thank you

  >

  Otherwise, you can specify the user name and password in the properties of your domain's initialization file.

  \user_projects\domains\dryrun_domain\servers\AdminServer\security\boot. Properties.

  # Generated by SCW on sea
  user name = {ESA} dbjKVafUpVLPvTG04tGl12RJRCaYmU5dmv2Yw =
  password = {ESA} 5WHBgndS2Fq2uoiIKKWI + rM2uwTPAYQ0I =

  Replace the username and password with your credentials.

  There's a tutorial with screenshots that describes how to do this here:

  http://St-curriculum.Oracle.com/OBE/FMW/WLS/10G/R3/installconfig/enable_auto_login/boot_identity_file.htm#T4

• Is it a live windows scam e-mail ask user name and password.

  I received an e-mail from windows live ask my date of birth and country of user name and password. Is this a scam / should I give this information?

  Yes, it is a scam to get your personal information. See:

  Scams by e-mail or web: how to protect yourself
  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  Avoid scams that use the Microsoft name fraudulently
  http://www.Microsoft.com/security/online-privacy/msName.aspx

  How to report fraudulent emails that use the Microsoft name and logo
  http://blogs.msdn.com/b/securitytipstalk/archive/2007/04/03/how-to-report-fraudulent-e-mail-messages-that-use-the-Microsoft-name-and-logo.aspx

  I hope this helps.

• XDB user name and password required in the Apex 4.0.1

  Hello
  
  I installed the Apex 4.0.1 on Oracle 11 g R 2 windows 2003 R2.
  
  I installed the apex 4.0.1 using the method of the Embendded PL/SQL gateway.
  
  After installation, when I run in url = http://localhost: 8080, pls, apex, apex_admin it up a small window requiring XDB user name and password.
  
  
  I don't understand what to do to solve this problem.
  
  
  
  I installed the apex by following the steps.
  
  Help, please.
  
  
  Thank you
  
  
  
  -Apex installation steps-
  
  @apexins SYSAUX SYSAUX TEMP is
  @apxchpwd
  @apex_epg_config.sql c:\apex_4.0.1
  ALTER USER ANONYMOUS ACCOUNT UNLOCK;
  EXEC DBMS_XDB. SETHTTPPORT (8080);
  
  
  DECLARE
  ACL_PATH VARCHAR2 (4000);
  ACL_ID RAW (16);
  BEGIN
  -Did the ACL currently assigned to ' *' and give APEX_040000
  -the privilege 'connect' if APEX_040000 does not yet have the privilege.
  
  SELECT ACLS IN ACL_PATH OF DBA_NETWORK_ACLS
  WHERE HOST = ' *' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
  
  -Before checking the privilege, to ensure that the ACL is valid
  -(for example, does not contain obsolete references to users ignored).
  -If so, we'll spend the following exception:
  --
  -ORA-44416: invalid ACL: 'APEX_040000' main outstanding
  -ORA-06512: at "XDB". DBMS_XDBZ', line...
  --
  SELECT SYS_OP_R2O (extractValue (P.RES, ' / resources/XMLRef ')) IN ACL_ID
  OF XDB. XDB$ ACL A, PATH_VIEW P
  WHERE extractValue (P.RES, ' / resources/XMLRef "") = REF (A) AND
  EQUALS_PATH (P.RES, ACL_PATH) = 1;
  
  DBMS_XDBZ. ValidateACL (ACL_ID);
  IF DBMS_NETWORK_ACL_ADMIN. CHECK_PRIVILEGE (ACL_PATH, 'APEX_040000',
  'connect') IS ZERO THEN
  DBMS_NETWORK_ACL_ADMIN. ADD_PRIVILEGE (ACL_PATH,
  "APEX_040000", TRUE, "connect");
  END IF;
  
  EXCEPTION
  -When no ACL has been attributed to ' *'.
  WHEN NO_DATA_FOUND THEN
  DBMS_NETWORK_ACL_ADMIN. CREATE_ACL ('power_users.xml',
  "ACL that allows users to be able to connect everywhere."
  "APEX_040000", TRUE, "connect");
  DBMS_NETWORK_ACL_ADMIN. ASSIGN_ACL('power_users.) XML ',' *');
  END;
  /
  
  commit;
  
  
  
  SELECT par_value FROM ctxsys.ctx_parameters WHERE par_name = 'FILE_ACCESS_ROLE ';
  
  
  
  CREATE THE APEX_URL_DATASTORE_ROLE ROLE.
  
  
  GRANT APEX_URL_DATASTORE_ROLE to APEX_040000;
  
  EXEC ctxsys.ctx_adm.set_parameter ('file_access_role', 'APEX_URL_DATASTORE_ROLE');
  
  
  ALTER SYSTEM SET JOB_QUEUE_PROCESSES = 1000;
  
  ALTER SYSTEM SET SHARED_SERVERS = 5 SCOPE = BOTH;

  Hi John,.

  you're right - it should be the other way around: usually (and, if following the installation guide) configuration for OHS DAD uses the path alias + / pls / apex + as for the EPG, it's just + / apex + by default.

  -Udo

• my new version of firefox will not save my user name and passwords - why?

  My version before I updated to 4 saved all my usernames and passwords. Since the update to version 4, it records only a few. I checked that I'm not running in privacy mode and have checked remember passwords and have a master password in the Security section. I have a laptop with Windows Vista.

  Some sites like PayPal, Yahoo, Windows Live, and bank sites use autocomplete = "off" to prevent Firefox to save and fill in the name and the password.

  If a site uses autocomplete = "off" then look at this article for a bookmarklet to remove the attribute autocomplete and Firefox will provide store name and password.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)

  If a Web site creates the login via JavaScript form then the password manager does not offer to store both passwords (Bug 518516).

• List of user names and password which are the same

  Hello
  
  I created several user with the default password even under the user name. They are supposed to change their password. But some of them have not changed their password.
  
  Now, I want the list of these users of database that has the same password as their user name. How can I find it?
  
  
  I'm really grateful if you help me.
  
  Thank you
  API

  Oracle stores the password as a hash and the same two passwords will not have same hash value, so there is no way to query on the password. Do you not use profiles?

  All I can think of is to create a small script to connect to the database using various users, you have created with their default passwords and log if the connection succeeded or not. And then you can have a list of all successful connections which means, users who are not the default password changed again.

  Thank you
  Daljit Singh

• Unable to connect to a dial-up connection does not require a user id and password.

  It's kind of a weird question.  I have a new vista machine, and a user must always connect to a Government to start the connection via modem.  In XP, we used hyperterminal and everything worked well.  As hyperterminal is not available under Vista, we spent some time trying to get the vista switched from work.  He composed, negotiates, but when it comes to 'verification of the user name and password' connection failed after that right.  He has not set password to connect, the password entered only after you connect and you select the option to connect.

  Now, I copied Hyperterminal from a XP machine and was able to connect.  But using hyperterminal, none of the shortcuts that I do can be used.  They all come with "could not read session file: c:\. "c:\session.ht".ht."  I changed the location of the shortcut, the location of the hypertrm.exe, departure to the target location, etc...  The only way to get a recorded session to run is to open hyperterminal, and then click file, open and point to the location of the session.ht file.  It works, I suppose, but its not just a lot more, especially since this is not until the last the default location that you opened a file from.

  Ideally, I would like to use the connection to start menu.  Is it possible to force the connection does not send a user name and password?  He always says "verifying username and password" even though I left the empty boxes.  Or is this another problem with Vista and dial upward?  Any help would be greatly appreciated.

  Thank you.

  I thought about it... a bit, I've found a workaround.

  You can call hyperterminal for the prompt, using:
  Hypertrm c:\myfile.ht

  You open hyperterminal as we are used to having open when you click the .ht file in XP.

  Knowing this, you can create a shortcut to hyperterminal which calls the hypertrm.exe AND the .ht file

  Mine is:
  C:\Windows\System32\hypertrm.exe c:\Windows\System32\ohip.ht

  Bloody Government and their former systems eh?

  I hope this helps!

  Dave

• After Startup Repair Vista requires user name and password that never existed.

  This PC has the power out (dell Desktop) new PS installed and start is caught in the loop and cannot start in safe mode either... all external connections taken off, but keyboard and still nothing.  Now when I try to startup repair it goes but completely then ask user name and PW.  It has never been so we're stuck with?

  Keeps asking to start in safe mode or repair... loop endlessly.  HELLLP!

  Hi Norba_1976,

  I suggest that you try hitting enter in the name of user and password screen and check if it goes through. If is not connected you then I suggest you to see the following sections which describes all the forgotten passwords.

  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

• When I try to share files between two computers Windows XP with SP3, I'm invited for a user name and password on both.

  I set up a home network with 2 computers with XP Media Center 2002 SP3 1 and 1 with XP Home SP3 2002 can see computers on the network and the Ping works. But I wonder a user name and password. seems to come from the computer. Do not see documents shared to the Media Center computer.

  original title: file sharing problems.

  As far as I can remember, Media Center is XP Pro with additional multimedia functions.  What follows is a very old post by MS MVP Malke, but the Council is still sound:

  File sharing / print

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Configure Windows to login automatically (MVP Ramesh) -.

  http://WindowsXP.MVPs.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Requires a user name and password

  I have widows XP machine that does not require a user name and password when re-booting and/or marketing.  Where is the setting I can change to require a username and password?

  Hello MathewSwenson,

  You can make changes in the user account window.

  1. open Control Panel.

  2. click on the user account icon.

  3. click on the link to change accounts.

  4. in the window account to change, click the user you want to change.

  5. in the user window, click on change my name and make the necessary changes, and then close this window and click on change password.

  6. Finally close the user accounts window

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Windows mail user name and password appear invalid username and password Port110 Secure (ssc) sever error: 0X8000CCC90 error number0X8000CCC92

  original title: windows mail windows security ask user name and password that has never been there before and error appears the invalid username and password Port110 Secure (ssc) sever error: 0X8000CCC90 error number0X8000CCC92

  Error invalid username and password Port110 Secure sever error: 0X800CCC90 error number0X800CCC92

  This thread was on Windows Mail, not Windows Live Mail.
   
  Windows Live Mail help is in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• "The specified network folder is currently mapped using a different user name and password", trying to connect to a remote drive.

  Original title: the specified network folder is currently mapped using a different user name and password.__To to connect using a different user name and password, first disconnect any existing mappings to this network share.

  I am trying to connect to a remote drive. I clicked to map the drive, entered the name of the drive, came the name of login/password for the computer turns on and then it give me this error message: the specified network folder is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share.

  In Windows 7 Enterprise, I would like to point out that, if you map \\server1\share1 as drive letter X using "user1" and "password1", then try to map \\server1\share2 (a different share) as drive letter Y using the same ID "User1" and "password1" and you select 'connect using different credentials' in the dialog box connect a network drive and specify the id "User1" and "password1". you will get this error MESSAGE INCORRECT that says 'the specified network folder is currently mapped using a different user name and password'.

  The message is bad because:

  1. the specified network (action2 in my example) folder is not mapped at all, and

  2. the server (in my example, "server1") is already mapped (to a different and different drive letter share) using the SAME user name and password.

  The error message is wrong in two respects.

  This let me puzzled for a while until I realized that once you have mapped to 'Server1' using the credentials, you can map to different actions on the same server without re - specify the credentials.  It is NOT CLEARLY the 'Map network drives' dialog box, which leads to users (like me, and I'm a programmer by trade) trying to enter credentials again and this incorrect error message.

  David Walker

• Analytics of obiee connection cannot get invalid user name and password

  Hi people,

  I am unable Loing analytical Obiee, get the valid user name and password when check the server log file do the sub questions.

  Authentication failed: invalid user/password.

  [2015 02-03 T 12: 13:52.000 - 05:00] [OracleBIServerComponent] [ERROR] [] [] [host: biapps.anblicks.com] [nwaddr: 192.168.100.112] [tid: dd8d8700] [ecid: 0053YdzsPuVEkJWzLwVK8A0006cE000000, 0:7210:6] PolicySet invalid: WSM-06102 PolicyReference reference URI "oracle/no_authentication_service_policy" is not valid.

  I am able to login on console and em with the same user name and password.

  Could any advice how to solve this problem.

  The problem is solved by rebooting my server linux...

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."