Macromedia projector

Similar Questions

• Macromedia projector video is distorted on the Satellite Pro L series

  Hello

  I have problems running a file of projection of Macromedia.
  It works but the video is distorted.
  If I remove the 965 chipset drivers, it works fine.

  But of course, it's not ideal because it causes problems with switching between the projector and the screen of the monitor.

  I tried to find more drivers today ect but same problem occurs.
  There's nothing wrong with the presentation that it works well on any cell outside.

  Any ideas?

  Hello

  Perhaps the graphic card driver should be updated I come to the conclusion that it is a problem of compatibility between the graphics driver and Macromedia projector, due to the fact that the video works properly after uninstalling.

  Then why you n t visit the Intel page and download the latest graphic driver for 965 chipset.

  By the way; computer laptop Satellite Pro L do you have?

• Macromedia Projector stopped working with update?

  I get the message "Macromedia Projector has stopped working" when I try to run games from play. They used to run fine.

  I tried to run in compatibility mode, received the same message.

  Windows Update installed a bunch of updates, the other day (KB979306, KB976264 KB975929, according to descriptions, I guess that one in the middle is the culprit here.)

  Running Vista Home Premium SP 2 on Acer 5520G TM.

  bessest,
  Have you tried other other than XP SP2 compatibility modes?  If not, then try the others on the list and see if one of them works.  If this does not help, perform a clean boot and test.  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• message, macromedia projector has stopped working on vista ultimate, never had a problem in the past. I tried tons of solutions that nothing works.

  Macromedia projector has stopped working, get this message when I try to play or install bigfish games. never had a problem, the recent past is only.
  my pc is vista ultimate
  tried several solutions, none works, very upset and frustrated

  Hi scooby65,

  Thank you for using the Microsoft Answers forums.
  a. do you receive any error messages?
  b. did you change to your computer recently?
   
  Try to temporarily disable all security software and check if it helps.

  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Also perform the following steps.
   
  Try these steps and check if this helped:
   
  1 left-click on start
  2 - right click on computer
  3. left-click on properties
  4 - left click on advanced system settings
  5 - running, click settings
  6. left click on the parameters of Performance data
  7 - click TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY.
  8. click on apply and then OK.
   
  Alternatively, you can try to install in clean boot mode and check if that helps.
   
  Steps to start in clean boot mode:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Alternatively, you can try to uninstall and reinstall adobe flash player and check.

  For more information, visit the links below:
  http://kb2.Adobe.com/CPS/141/tn_14157.html
  http://kb2.Adobe.com/CPS/191/tn_19166.html  
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• I tried to install VideoProfessor CD and a pop-up window has Macromedia Projector has stopped working what is the solution?

  I tried to install VideoProfessor and I failed in my attempt. VideoProfessor icon appeared on my desk and MacroMedia Projector has stopped working

  Hello

  1. is the question confined to the CD video Professor?

  Macromedia Projector is a utility that includes a Visual Flash presentation in a stand-alone EXE file, so you can view the images on a PC without the Flash Player installed.

  I see that this problem could be associated with a problem between Direct X and Shockwave.  It can be corrected either by:

  ·         Re-install the latest Direct X

  ·         Uninstall and reinstall Shockwave, if you already have the latest direct

  Method 1:

  To download and install the latest version of DirectX, follow these steps:
  Visit the Microsoft Web site at the following address:
  http://msdn2.Microsoft.com/en-us/DirectX/aa937788.aspx (http://msdn2.microsoft.com/en-us/directx/aa937788.aspx)

  Follow the steps on the Web site to download and install DirectX.
  You can also visit the following address Microsoft Windows Update Web site to see if DirectX updates are available:
  http://windowsupdate.Microsoft.com

  Method 2:

  Also try the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Macromedia projector says he does not work for Big Fish Games and games won't go full size

  Original title: Macromedia projector says it does not work!  Help!

  I need the macromedia projector to see Big Fish Games strategy guides. It is said that it does not work! Also my games won't go to full size but stay in the smallest size. I don't know when in the last 2 weeks, what happened. I was in the hosptial and came home, computer to update and I've had problems since.  Downloaded DirectX as recommended in the reading of other problems, but it did not help. Would appreciate ANY help. This grandmother is not super computer but have got along very well for years even with new programs. Thank you!

  Hello

  1. is the specific question of Bigfish games? Other games play fine?

  Macromedia Projector is a utility that includes a Visual Flash presentation in a stand-alone EXE file, so you can view the images on a PC without the Flash Player installed.

  Method 1:

  You can try to run the game in Windows XP compatibility mode and check if this solves the problem.

  To install the program in Windows XP compatibility mode, see the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Method 2:

  Make sure the application you are trying to run is trustworthy and that you have downloaded or installed from a source valid.

  a. click the Start button, right click on "computer", and then select properties from the list.

  b. click on 'system protection', click on the "Advanced" tab and click the settings button in the performance section, then click the Data Execution Prevention tab.

  c. There should be two selections, and "Turn on DEP for all programs and services except those I select" must be selected. Click on the Add button and navigate to the folder that your game/app for (usually located in the folder program files). Click on the .exe file in the folder that launches the application.

  d. run the game and check if it works well.

  You can also post your query inin BigFish forums for assistance.

  http://forums.bigfishgames.com/forums/list.page

  You can also change the resolution of the games are run in and check if you get the full screen. This is usually found in the video options.  However, these options are not all games.

  You can also check out the link:

  Change the screen resolution

  Hope this information is helpful

• Macromedia projector stopped working when visionlab and rendering crashes in sony vegas with home premium windows 7 64 bit

  I have brand new studio xps 64-bit pc with windows 7 installed. I get the error above in visionlab and sony vegas still visionlab project examples make it very good. Ive was almost tried everything and dell doesn't have a clue

  Hi d,.

  Here's a thread that may help:

  http://www.softwaretipsandtricks.com/Forum/Windows-XP/8889-Macromedia-projector-error.html

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix the message Macromedia Projector has stopped working

  I bought two vessels CD which is fine until I want to print, and then I get the above message.

  I've had enough of ti menmort run the program. I have 98 GB free. I use the latest version of Adobe Flash Player and my laptop uses windows 7 64 bit Firefox browser.  I have only a little cranky warned and don't know what to do to solve problem.   Help please?

  the download is a self-extracting zip file

  Right-click on it and extract here

  If your two deeper directories paste it into the root for now

  then run hpzstub this will bypass the step of projector

  Good luck

• Macromedia projector has stopped working

  This is the message I have gewt when I try to play a game that I bought online

  Hi feedie89312,
   
  Welcome to microsoft windows vista forums!

  I would like to ask you a few questions to help focus in the right direction:

  • What game do you play?
  • The error message you received includes a hex code? What is the hexadecimal code 0 x 800 similar number...?

  Method 1:

  This problem could be associated with a problem between Direct X and Shockwave.

  It can be corrected either by:

  1 reinstall the latest Direct X

  2 UN-installing and re - install Shockwave, if you already have the latest Direct X

  3 both of the above

  To download and install the latest version of DirectX, follow these steps:
  Visit the Microsoft Web site at the following address:
  http://msdn2.Microsoft.com/en-us/DirectX/aa937788.aspx (http://msdn2.microsoft.com/en-us/directx/aa937788.aspx)

  Follow the steps on the Web site to download and install DirectX.
  You can also visit the following address Microsoft Windows Update Web site to see if DirectX updates are available:
  http://windowsupdate.Microsoft.com (http://windowsupdate.microsoft.com)

  You can also visit http://www.shockwave.com for more information on downloading and installing their software.

  Method 2:
  Try to run the game in compatibility mode for windows XP SP2:
   
  To change the settings for compatibility manually for a program, right-click the program icon, click Properties, and then click the compatibility tab.

  	Run the program compatibility Wizard:
  	1. Open the program compatibility Wizard by clicking the Start button , by clicking on the Control Panel, click programsand then click use an older with this version of Windows program. 2. Follow the instructions in the wizard.

  If you are unable to install a program, insert the installation for the program and, using the wizard disk, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.

  If the above mentioned steps doesnot work, check with the manufacturer of game.

  Let us know if that helps.
   
  Thank you, and in what concerns:
  Ajay k Microsoft support
   
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How can I get my projector to macromedia to begin working again

  Help, please

  Hello

  1. What operating system do you use?
  2. You get the error message?
  3. Were there any changes made on the computer before the show?

  Method 1:

  Uninstall the application and reinstall it. Check out the link and follow the steps.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:

  Macromedia projector error may appear when you try to play a game on your computer. May display a message similar to "Macromedia Projector has encountered a problem and needs to close". In this case, usually, the game software is an outdated version and it might be incompatible with your newer computer. You can correct mistakes and play the game by setting your computer to run the program, even if it was made for an earlier version of your current operating system.
  
  Visit the website of the manufacturer of the game and download updates of the software. If Macromedia Projector errors are resolved, stop here; Otherwise, continue to the next step.
  Follow these steps and check.
  1. Click on the "Start" button, then click on 'control panel '.
  2. Type "Troubleshooting" in the search box, and then click "troubleshooting."
  3. Click on "Run for previous versions of Windows programs" under "Programs", then follow the on-screen instructions to complete the process.

• When you try to install a game from big fish I download Macromedia stopped projection workinf

  during the installation of big fish games I get macromedis projector has stopped working

  Hello

  Macromedia Projector is a utility that includes a Visual Flash presentation in a stand-alone EXE file, so you can view the images on a PC without the Flash Player installed.

  Method 1:

  You try to install the games in Windows XP compatibility mode and check if this solves the problem.

  To install the program in Windows XP compatibility mode, see the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Method 2:

  (a) verify the application you are trying to run is trustworthy, and that you have downloaded or installed from a source valid.

  (b) click the Start button, right click on "computer", and then select properties from the list.

  (c) click on 'system protection', click on the "Advanced" tab and click the settings button in the performance section, and then click the Data Execution Prevention tab.

  (d) there should be two selections, and "Turn on DEP for all programs and services except those I select" must be selected. Click on the Add button and navigate to the folder that your game/app for (usually located in the folder program files). Click on the .exe file in the folder that launches the application.

  (e) launch the game and check if it works fine.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KeyframePlayer seems to cause error in projector

  Director inside my code compiles without returning an error. If I play the movie inside the Director, everything seems to work properly, and no errors appear. When I publish a projector, run it and look at it, everything seems fine.
  
  When I close my projector by clicking on the 'X' in the top right of the window, I get the below error:
  
  Macromedia Projector has encountered a problem and needs to close. We are sorry for the inconvenience.
  
  I have commented a lot of code out there and it seems that keyframePlayer is the culprit. Just a trace of the race in a behavior script causes this error occurs when the closure of the projector (see attachment code.)
  
  Are there traps or common mistakes about the keyframePlayer I should know about?
  
  * I use JavaScript
  

  Problem solved.

  Manual removal of the modifier inside a function of stopMovie keyframePlayer seems that the error does not occur.

• How to install Adobe Shockwave Player on a 32-bit operating system?

  While I was trying to play a game of guitar, I kept receiving an error message indicating that Macromedia Projector cannot display the recommended graphic. I have a 32-bit operating system, but I have installed Adobe Flash Player and Shockwave Player more than twice but the problem persists. How do I solve this issue?

  Hello Lf1,

  Thank you for choosing Microsoft answers forum for windows vista.

  I suggest you to download and install Microsoft Silverlight on your computer from the link below.

  http://www.Microsoft.com/Silverlight/get-started/install/default.aspx

  If this does not work, I suggest to get the Macromedia one, you can contact Adobe for more information on the supported platforms.

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope it works for you.

  Kind regards
  AmrithaCK - Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to delete the history of files Windows Flash Player 10.1 projector open?

  I downloaded the standalone flash player (flash player 10.1 projector) on windows 7 64 bit. It works very well, but how do I delete the history of the opened file? It is not installed anywhere, as it is the standalone player, so I have no idea where its stored.

  Thank you

  It is stored in the registry:HKEY_CURRENT_USER\Software\Macromedia\Flash Player

• Duration of the conflicts with macromedia Director

  Hello

  I have a request of the ISV who apparently uses macromedia Director, it is supposed to work on mac osx and windows etc. The application is 'Swiss Map' and it is a product of mapping. End of year last impression has stopped working, if you try to print, you will get the basic map, but overlays would be displaced, for cards you would get your way has moved a few hundred meters that effectively makes the useless product. I found that the problem started when I had installed photoshop elements and if I removed/Library/Application Support / Macromedia everything was back to normal.

  Only now it is started again and I already deleted these files, so I'm stumped. My share of s two questions, first and it's one question broad and imprecise, where else would the first cause? And secondly, is there a way to control the execution environment at all? Can I control exactly where this application is looking for components or even just to know for sure. If it were simply executable I would have an idea where to look, but I don't have enough knowledge on macromedia Director to know quite where to start.

  Obviously I connected the problem with people who support this, but I don't think that either they or me any real expectation that they will solve this problem or even be considered worth working on it. Meanwhile, I have a thousand francs for the software that is not fit for purpose and I burn money buy new cards every week.

  Thank you!

  It seems that if you are the end user of a product, not the developer.

  If I understand correctly, you contacted the company that developed the product.  They know better than anyone how the printing features and overlay have been implemented.  Perhaps you could suggest they post a question on this forum, giving technical details.  Other developers of Director on this forum will then have a better chance to suggest a solution, rather than to speculate in the dark.

  Among the details that we will need to know are:

  * On what operating system experience you this problem?

  * Have you recently updated or modify the operating system?

  * What regional settings do you use (what country / language)?

  * Version of the Manager was used to create the application?

  (You talk about "Macromedia Director", who is under the age of 6 years and was not designed for the newer operating systems)

  * What is an executable application or an application based on a browser?

  * Should I use a standalone projector or Shockwave projector?

  * What technology is used for printing (PrintOMatic, Flash,...)

  * Are these overlays 3D or 2D?

  * ...?

  If you or the product developer can provide answers to these questions, then we can ask more detailed questions until someone finds a solution.