Madness of watermark

Similar Questions

• 6.6 LR stops when I try to edit and export using my signature watermark. Help?

  I noticed that my custom watermark signature did not show on my exported photos. So, I tried to modify the watermark in re-importing. But whenever he tried to import the watermark (which I've used forever), LR will stop. Anyone else having this happen?

  Before I updated to LR 6.6 CC I had the following questions and that he hoped they would go away with the update, but they don't have: when I tried to move a photo in the develop Module, it takes forever to get to the position on the photograph that I am trying to display. I finally gave up to change this morning because I found to be the worst since the update and almost couldn't move around the image. My sliders are also always insensitive. I need to stop and restart LR to apply the cursor changes.

  I use LR since LR 3 and quite well-known with her.

  Any help?

  Hi Tanuj,

  Thank you for taking the time to help me! I think I have fixed some issues with a little more trial and error.

  Regarding the graphics processor, it was already unchecked. So, I checked to see if it makes a difference. Well, he did. The sliders work fine now. However, advance photos takes a little longer than normal. Photos are already made at a ratio of 1 to 1 and must pass them more quickly. But with each advance, I must wait for the panels to cool off. However, the problem of not being able to move in a picture with the hand cursor disappeared. It seems that adding the graphics processor, that the problem has been corrected. Just to let you know, I have a card from ATI over-pants V (FireGL V). See below for details.

  As for the watermark...

  Yes, it's a png image. And yes I tried a different watermark that worked. I went ahead and remove watermark I tried to work with and rebuilt fresh. Perhaps, he had got corrupted or something, because it works very well.

  Once again, thank you very much for getting back to me and be ready to troubleshoot this thing. I am getting so frustrated!

  With gratitude,

  Deb

  Version of Lightroom: CC 2015.6 [1078672]
  License: Creative Cloud
  Operating system: Windows 10
  Version: 10.0
  Application architecture: x 64
  System architecture: x 64
  Number of logical processors: 8
  Processor speed: 4.0 GHz
  Built-in memory: 32667,4 MB
  Real memory for Lightroom: 32667,4 MB
  Real memory used by Lightroom: 4832,6 MB (14.7%)
  Virtual memory used by Lightroom: 5225,0 MB
  Memory cache size: 4487,4 MB
  Maximum thread count used by Camera Raw: 8
  Camera Raw SIMD optimization: SSE2, AVX
  System DPI setting: 96 DPI
  Composition of the Bureau enabled: Yes
  Exhibition: 1) 1920 x 1200, 2) 1920 x 1200
  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:
  Graphics ATI over-pants V (FireGL V)

  Check the supported OpenGL: past
  Vendor: ATI Technologies Inc.
  Version: 3.3.13399 context FireGL 15.201.1151.1008 basic profile
  Rendering engine: ATI over-pants V (V FireGL) graphics card
  LanguageVersion: 4.40

• If I'm working on a project in a free trial of Premiere Elements, and then save the project (do not export it) and open it again in the full version of Premiere Elements, the watermark will be removed?

  If I'm working on a project in a free trial of Premiere Elements, and then save the project (do not export it) and open it again in the full version of Premiere Elements, the watermark will be removed?

  If you have made the timeline or out of a movie from the trial version, it will have this watermark on it.

  Once you have purchased and activated the software, you can remove the watermark by going to the folder directory on your computer where your project files are saved and deleting the folder Adobe Premiere elements preview files.

• Watermark feature does not

  I use the version more up-to-date for Lightroom CC (just updated today).  I had successfully exported pictures with a watermark for a few weeks when it suddenly stopped working two weeks.  I go through the same movements to choose what watermark I want and export, but when I opened the file exported after, there is no watermark on it.  I have a desktop computer and a laptop computer, so when he stopped working on my desktop, I installed CC on my laptop and was able to resume the tattoo it.  However, I now have problems with my laptop as well, now I have to figure out what the issue is!

  I searched and see that many others have had the same problem but none of the proposed solutions have made no difference to me.  Any idea that someone can provide would be very helpful!

  Thank you very much, Akash!  I should have mentioned that the watermark that I was trying to apply has an image (PNG file).  I followed your instructions and the text watermark worked perfectly.  When I was in the watermark editor, I realized that my image watermark did not yet appear in the preview of the image, then later the image is not selected.  I had moved the file to another folder on my computer, but I thought that the watermark work stopped before.  I probably won't move the file again, but just out of curiosity, I have to reselect the file in each watermark option whenever the path of the PNG file changes?  Thank you once again!

• Why not LR3 watermark my images vertical?

  PC - Win8.1 64 bit - LR3.6

  This problem has just started a week ago but could not continue this problem to another who has taken birth.

  LR will be watermark (my name: Art Scott - script brush PS) on horizontal images, but not vertical markets.

  ANY HELP GREATLY APPRECIATED

  a not appearing on vertical markets in the preview of windows or PSCS6...

  I made 4 new Signatures and ther last finally work properly...

  Thanks Tanuj Sandal.

• Transparent watermarks in Lightroom

  I try to add a transparent watermark for my photos. When I go to add logos saved in the computer, it does allow access to an AI or a GIF, JPG file only, which is not transparent. How to solve this?

  I tried to convert the JPG file into a PNG file, but it did not work.

  Thank you!

  99jon,

  Thanks for the reply! Here's my problem...

  I already have logos made. I don't create logos or have the ability. I hired someone for their creation and now need them in a PNG file (or transparent)!

  I'm a total newb to all this.

  Any suggestions?

  Thank you!

• How to change the certificate watermark in Adobe Reader

  I need to change the watermark of signature of a document using a certificate, the default seal adobe logo.  I followed the instructions on the following link, which I pulled the relevant article of like the image below to save the time potential helpers. -> 4 appearances of personal - Signature guide digital for HER signature

  

  Everything was fine until they hit the location of the file in which the file SignatureLogo.pdf.  There is no such location of the file.  Or something like that.  I guess it's a difference between Acrobat and Reader.  Where I put this file for Adobe Reader?  I've already rooted through all files in C:-> Program Files-> Adobe-> Player 11.0 and go home empty-handed.  There is no security file.  I tried to create a folder called security in Reader 11.0 and place the file inside, it works no more.

  Search turned up nothing else than to unanswered questions.  I hope I have provided enough context information that mine will not the same thing, as a local jurisdiction requires that said watermark to change, and there are drawings for a project that cannot be made until this.

  The change can be done using only the free player.

• Loss of contrast and color using watermarks

  Hi - I use Lightroom 4.3 to add a tattoo of copyright (png) image for existing tiff files for the use of the Web site. I have several different png files made using Photoshop Elements, with the text of copyright attached to different transparencies, for example 20/30/40 for 100-opacity, so that whoever I use in Lightroom I can always leave the opacity setting in the Watermark dialog box to 100% and images are resized proportionally to 35%.

  The problem is that whenever I export the files after setting the position of watermark etc, I noticed that there is a significant loss of contrast and color in the files tiff newly made, and I can't understand why this is, or any means to fix. Has anyone else had this problem and was able to remedy? Thank you.

  Lightroom 4.3, Windows 7, 64 - bit.

  Double-check all dialog export - exporting in Adobe RGB instead of ProPhoto or sRGB?

• What happened to my watermarks?

  All of a sudden, they are all gone. I can see them in the libraty under Application Support/Adobe /...

  I made a new and that another is not in the library. Here is the stored watermarks?

  5.3 LR and LR 5.2 to see if I could restore the missing watermarks. No luck.

  Thanks a lot if you have any ideas!

  Chet

  Have a play with the preference setting "Store Presets with this catalogue" (Preferences > Presets tab), toggle it works, checking each time to see if your watermark presets appear.

  For a full explanation as to what could be happeneing, see here:

  http://www.lightroomforums.NET/showthread.php?14169-what-is-the-purpose-of-the-quot-store-presets-with-catalogue-quot-option

• Watermark in first 11 Elements

  Hello

  in October, I downloaded the trial version first items 11 and I made a whole movie of 1 hour with her. After the first 30 days, I bought first items 11, serial number and watermarks went. All very well.

  Now, a few months later, I opened the same project to add subtitles to it. And all of a sudden, the watermarks are back on the elements of rendering the movie. Now, I read somewhere that to remove them, you must delete render files and perform a new made it all, but I refuse to do given that 75% of my film is rendered and I spent like 5 weeks working on it. In addition, watermarks were gone before. So why in heaven's name they are back now and how can I get rid of them?

  Michelle.

  Welcome to the forum.

  I've never read a fully-paid version of pre back on the "trial". [It came with a version of PrPro, but are usually not with pre.]

  Rendering files are JUST for a smoother reading, so before get you to the exit through Share/Publish, you can safely delete the files to Scratch Disks > media Cache. There will be nothing is lost, with the removal of these files, to erase the watermark, right here. The files in the timeline will be transcoded separately from these files to restore, when you go to the exit.

  The FAQ entry on the use of the project, which has begun in the trial is here: http://forums.adobe.com/message/1966673#1966673

  Good luck

  Hunt

• How to import a layer PS (existing watermark) 6

  This could be a very stupid question, but I can't just figger out. I did a watermark for my photos. I know how to make a watermark and how to record with a photo. However, I don't know how can I import an existing watermark (that I made and recorded before) in a new image, put in place. Now I have to make a new layer of watermark with each image that is a lot of work.

  He was looking for, but just could not find how. Help, please! Using photoshop 6

  Thank you

  Jeroen!

  To import an image is by clicking on file > Place... This will place the image in your project as a new layer.

  

  If you work with many images and you want to automate this decision please process an eye in this discussion where I show how to use shares:

  http://forums.Adobe.com/message/4944001#4944001

  I hope this helps!

  Julia

• Can I remove created presets and watermarks?

  When I was first with LR I was playing around with a watermark for my photos, but also a watermark.  After that I created the predefined user and watermark and became more comfortable with the program and understanding means that all settings, I tried to edit save them under the same name, hoping to replace the previous settings.  However I got was a notice that "the name is already in use."  This then made me save the settings as a new preset and watermark.  I was wondering if there was a way to remove these original presets that I am not satisfied?

  Thank you!

  You can select a preset in the existing watermark editor, then the same menu includes an option to remove. Wherever the presets can be saved in LR, it usually (maybe always?) is also a way to remove these, provided in the same place. Also (if, exceptionally, not to the watermarks) there is usually a way to update a saved preset using the current settings.

  More generally, the presets are simply text files (file type ".lrtemplate") and LR preferences / Presets tab includes a button that opens the location on disk where all subfolders of different presets. Elements to the breast can simply be deleted from here... and also backed up, inspected or modified with a copied all over another computer text editor and so on.

• issue of watermark cfpdf

  All,

  I'm having a problem when adding a watermark to a pdf document.  Here is the code example below:

  <!---2 merge documents together->

  < cfpdf

  action = "merge".

  source = "test.pdf, test2.pdf"

  destination = "merged.pdf"

  Overwrite = "yes" >

  <!--> Add a watermark text to the newly merged pdf document

  < cfpdf

  action = "addwatermark.

  Text = 'Hello '.

  source = "merged.pdf"

  Overwrite = "yes".

  foreground = "yes".

  destination = "Watermark.pdf" > "

  <!-file to output user and then delete->

  < cfcontent

  ' file = ' http://Web-address/watermark.PDF "

  Type = "application/pdf".

  DeleteFile = "yes" >

  Files merge correctly and the watermark text is added successfully.  However, when I change the watermark to something like, "Hello1", save, then click the back button in the browser and try to merge again, it shows again, "Hello" and not "Hello1.  If I close the browser and reopen, then "Hello1" shows correctly.

  It looks like this to store in the cache somehow.  As shown in the code above, I tried to add the "deletefile ="yes"' to the < cfcontent > tag, but is not delete the file after posting to the user (I checked the folder location)."  Also, I tried to add, "< cfcache action ="flush">" to the top of my page, but without success either.

  Can you think of any other way to remove this file, or another solution?

  Thanks for the help.

  OK, I found out what went wrong.  Apparently there was a setting on the server is not enabled, this is why deletefile = 'Yes' was not working.  Make a call to my server admin and he has made the change, and it worked.

  However, which only sort of solved the problem.  When I tried now to merge/watermark to apply to my selected PDF documents, it would immediately be goto to a blank screen after choosing to merge.  If I clicked back, and tried to merge again, it will display the PDF files.  Weird?  The merged file was certainly have saved to a folder on the server, but it was not properly display to the user.

  After some research, I ended up save the docs merged to a variable and then out the variable to the screen of users; Therefore, a document is not physically be saved on the server.  Here is my code:

  <>

  action = "merge".

  source = "" #listOfFilesWithPath # ""

  name = "mergedDoc".

  Overwrite = "yes" >

  <>

  action = "addwatermark.

  Text = "Hello World".

  source = "mergedDoc".

  Overwrite = "yes".

  foreground = "yes".

  showonprint = 'yes '.

  opacity = "1".

  rotation = "40".

  name = "myPDF" >

  This works perfectly.  I did not try this method first, because the Adobe documentation States the following:

  "ColdFusion gives you the ability to write a PDF file to a variable using the.

  Name attribute, which is useful if you want to perform multiple operations on a document before writing it to a file. However, it is practical for small files only because of memory requirements. If you work with large PDF documents, write PDF documents in files. »
  
  However, I found the opposite.  I have successfully merged more than 500 pages (many documents in pdf format) below a min.  It is faster than my previous method using iText and saving the docs on a folder on the server light-years.

  I hope this helps someone else out there who is trying to do the same.

• What is a watermark?

  I'm a little confussed.  I made two identical sequences (sequences with the media of same exact sitting on the timeline).  An I without any renders, the other with Cineform restores.

  It's all perfectly on both sequences EXCEPT my title sequence. MOV (exported as DNxHD).

  The sequence with rendered Cineform shows a crazy blue on the clamp, the other is not.  But blue DOES occur on the timeline/sequence rendered Cineform and ONLY on my "sequence.mov title" file.  My title sequence is already exported and serving as one. MOV on the timeline and I can see it through Windows Media Player, bridge, Quicktime just like a normal clip, but whenver I give the first timeline (or brother of Blue Screen of Death) that turns a blue clip.

  What gives?  If blue is a slope, then why not this watermark other sequence next to a clip?

  

  

  Nope, it's a bug. Here is the explanation and workaround: Blue films | Exported by Adobe Media Encoder CS5.5 | Adobe Premiere Pro CS5.5

• How do I watermark my pictures all 9 elements?

  I made a cool watermark with styles and I want to put that I at all

  images. How can I do?

  In your original post, you said that you have a water mark. What happened to that one?