Why not LR3 watermark my images vertical?

Similar Questions

• Why the effects do not work on still images.

  Why some effects do not work on still images?

  As the active camera or earthquake?

  It seems to me that to have an earthquake or the busy camera, a series of images will have to be moved by the software.  In other words, you need a video clip with separate images.  A still is an image.

  You might be able to get around that.  Place your image in a dedicated project, a video share/export.  There will be many executives you need.  Report a project like the video rather than as a still.  Then you should be able to apply your chosen effects.

  I did not had time to try it, but I think it should work.

  Bill

• Why do I get "mscms.dll is not a valid windows image" on everything I try?

  I'm working on the kinks of swap hard drive in my Dell E310. The original tested 'ready to die' so I installed a new. I bought the backup for XP Pro disk, when I bought the computer. I loaded the operating system on the new drive and did the updates (80 or almost). I regularly get the message "the file or dll C:\WINDOWS\system32\mscms.dll is not a valid windows image."  What now?

  I've damaged my file mscms.dll on purpose and could not get any message about it even though I know that it is corrupt - maybe I wasn't quite hard.   I know that some other mscms.dll errors, but they are different.

  Tell me what you're doing to regularly get the message because I'd like to see it.

  After reinstalling and apply the updates of 80 or more, one of them was Service Pack 3?

  If you are not sure which SP you re running, click Start, run, and in the type box:

  Msinfo32

  Click OK to see your system information and Service Pack and what does say?

  If the rest of your system works well, you can use Explorer to navigate to the c:\windows\system32 folder and rename your file to mscms.dll suspicious to a name, remember (like: mscms.bad).

  So if your Windows File Protection is not working properly, it will notice the missing file and quickly and quietly, to replace the missing file with a backup copy.

  Wait a few seconds... then press F5 in your Explorer window to refresh the view and see that the file has been replaced and you have the mscms.bad and a new copy of mscms.dll.

  You should see a message like this in your newspaper observer event system:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\mscms.dll. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5627.

  Restart and see how things look now.

  I can also send you a version SP2 or SP3 file mscms.dll via my SkyDrive and you can rename your suspicious file and replace to see if that helps your condition.  You might have some settings do not match here.

• Why not Vista Home Basic or IE8 display images saved in saved, html pages after I change them?

  My system is Vista Home Basic and IE8.
  As an amateur, I often save Web pages with the content I want, then later in offline mode, I change the content of the Web page so that the party I want to keep. Often, the Web page contains an image, and when I want only the part of this picture, I change to delete unwanted parts. For example, I can only wish part of a radio chart.
  Vista Home Basic or IE8 will not display these edited images, jpg and gif. I can only record the image as a bitmap, which Vista Home Basic or IE8 will display, after having been edited.
  I tried to share the image with EVERYONE. I tried to share the webpage with ALL file.
  I don't know if this problem is of Vista Home Basic or IE8, but this IS Microsoft.
  Someone knows a way to solve this problem?
  What is one of the tools Microsoft neutered for the cheap Vista Home Basic?

  The painting seems to be the problem.  I had not heard of this problem with the paint before, but it is possible, that he has always been there.  At least you have a program that gives you a work around for the problem you may need to consider that your standard procedure (since there is no way to uninstall it and reinstall Microsoft Paint on its own to fix everything that could be bad if indeed there is one problem other than a stardard deficit in the program.  It is not a very sophisticated program, after all - but what you try to do should work as far as I know (he just apparently)).

  Maybe you can get more information in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where people who specialize in Vista (like Microsoft Paint) additional programs will be more than happy to help you with your problem (if there is in fact a solution).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Why can I not see thumbnails of images from my .psdx files in my folder of Creative Connection of Cloud?

  I'm saving up my projects at my creative cloud account and use the CC connection. My .psdx files appear in my connection CC icons folder, and not as thumbnails of images. What I am doing wrong?

  BTW, what OS are you using?

  PSDX files may not be supported by the operating system for an overview if that's what you want to say about overview.

  For example I don't see previews of PSD files on your Windows desktop.

  Thank you

  Ignacio

• Error - the application or DLL is not a valid windows image. Please check this against your installation diskette when trying to open a program or start the computer.

  Original title: bad image.

  I get two errors of bad image whenever I open a program or start a computer, for each program.  the error that says "the application or DLL is not a valid windows image. "Please check this against your installation diskette" I don't have any disk and don't know what to do.

  These file names, look a little suspicious and didn't get good Google search results, so I think that the first thing to do is to tell us a little about your system.  Now you can enjoy when you report a problem, provide you with any error messages you see and not a part of it (not paraphrase either).

  The second thing to do is to try to be reasonably sure that your system is free of malware and then if you have these problems, you can fix them (which would be the third thing to do).

  I still wonder why the Microsoft Support Engineer made you reference to an article that makes no sense at all...

  The first thing to do:

  Unfortunately, MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The second thing to do:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  The third thing to do:

  Restart your computer and solve the outstanding issues.

• 5505 all-in-one printer not print some pdf images.

  5505 all-in-one printer not print some pdf images. the paper passes through the printer, but no image or text is printed on the paper.

  This seems to happen when the document is an 'image' and the text is not "searchable".

  Windows XP.

  no error message.

  recently started using Adobe Acrobat X (I had already been using player)

  When I made this switch, the scanner has stopped working and I uninstalled the software of the full suite and installed the basic print driver. it: HP officejet basic driver.

  After loading the base driver, scanner worked again and most impression seemed to work, all the other documents I've tried seem to work well. (If I save as word or jpg), with the exception of pdf images.

  I think I remember having a similar mistake many years ago, but the "BestModeUpdate.exe" said that it is not relevant with the latest driver.

  Hello

  Please try to print the PDF file as an image and check any changes:

  Open a PDF document and open the print dialog box.

  Click Advanced.

  Select check as Image and try printing.

  As the issue began after replace the PDF software and any similar behavior does not appear for other applications, it seems like a problem in the software Adobe Acrobat... That's why I suggest you contact Adobe support.

  Kind regards

  Shlomi

• 2015 CC Dreamweaver shows why not the border of the table. In the prevoios version Dreamweaver CS6 see the border of the table.

  2015 CC Dreamweaver shows why not the border of the table. In the previous version of Dreamweaver CC see the border of the table.

  See the difference

  Dreamweaver CC 2015

  

  Dreamweaver CS6

  

  The first image shows 'Live' display, as the second watch design mode. That's what I think "Design" shows in the latest version of DW.

  

• Why not see designer optionally

  Why not see designer optionally

  If you talk about workspaces, Adobe simplified them just two or three for a minute, here, now there are more in 2015 for CC, but the designer is not one of them.

  You can customize your own workspace by...

  1. open the panels you want in the window menu

  2. slide the named tab of the Panel (not the top bar, just the tab) on the edges of the image of the application until you see a highlight.

  3. release the tab to lock the Panel into place on the application framework or other edges of the Panel.

  4. go to the window > layout workspace > new workspace for him give a name and save it

• I am unable to open a photoshop file to native HDT... why not?

  I am unable to open a photoshop file to native HDT... why not?

  How you try to open this file? HDT is a preset file and screening of all files must be opened through their appropriate user interface and not just by double-clicking on them as a normal image file. After a screenshot how you open that file.

• Some photos are not selected when I try to import ("do not import possible double images" is turned OFF!)

  Some photos are not selected when I try to import. I used Lightroom 5 since it launched and do not have this problem until a month ago (select: "do not import possible double images" is turned OFF!). I really have to control my import in the opposite case, it miss a few images, but don't know what to do when the picture is not selected. How can I import the correctly without making stuff and that's why spoil my archive carefully planned? My archive is too packed and I have double numbers ore something? What I need Lightroom 6?

  Thank you very much for your help!

  Best regards, Enith

  "Photos are indeed grey, but the imported photos are new assignments, so this:" ","then it means that you have previously imported photos in Lightroom, and so it is not necessary to import them again ', is not the case.

  While you are probably right, if the photos were just captured, the problem is that Lightroom think that these are the same pictures that were previously imported, and so until you can determine why Lightroom think that you won't progress.

  You need search for any of these photos in your Lightroom Catalog. Follow these 4 steps in order

  1. In the catalog Panel on the left side of the library Module, click all photographs
  2. Develop all batteries (picture-> stacking-> develop all batteries)
  3. Disable all filters (once or twice Ctrl-L)
  4. Search for one of these photos by file name

• Can not (hold) place an image or an object in front of text on a question slide (Captivate 8)

  Why can I not (do) place an image or an object in front of text on a question slide (Captivate 8)?

  Organize is grayed out:

  

  Sometimes, I managed to have objects on top (see link below), when having the object on the slide before the object, what to put in for the rest of the project, always display on top. But this workaround is a bit inconsistent, cannot guarantee that it will work.

  Buttons on Question/Score of Captivate 6 slides? -Captivate Blog

  Another solution is to create a custom question. There is a lot of work, you can use drag - and drop to create it, some actions of the object. Or you can use the dropdown interaction to let the user decide which element to match with. I created corresponding to these questions with the Interactive InfoSemantics drag & drop widget, but is limited to the output SWF.

  Lilybiri

• LR 3 not showing watermark on web galleries Lr 2

  Everyone knows this? There may be a known issue?

  3.0 there is a bug in the old style "simple copyright watermark" - the bug is that the copyright is not added to the image. This problem is fixed in 3.2RC.

  Use the new style "Edit Watermark" or upgrade to 3.2RC.

  John

• Develop profiles of camera loaded but not LR3 projection in

  I checked in French - documents and settings\all users\application date\adobe\camera raw\camera profiles and Nikon D700 and many more seem to be loaded. However they do not have in-camera profiles in "develop." Anyone any idea why not?

  Alan,

  All camera profiles you see listed ARE for your D700.  Adobe provides this same set of profiles for all Nikon digital SLR.  When Lightroom has focused on an image, it looks at the image data what camera was used and then provides you with profiles that were designed for that camera.  There is no way for you as a user to select a profile for another camera.  Open a bigger can of worms.  I know not enough about the history of Nikon cameras to understand why there are patterns D2X for all cameras, but all you need to know is that there are these modes, and they were very well settled for little matter model took the picture.

  Yet once, you don't have the option in the Lightroom to choose what model of camera profiles are available for guests.  Everything you need to know is that the profiles listed are those that have been developed for your model.

• Why I can't mount images in InDesign from the 'images' as I did with "iPhoto" before?

  Why I can't mount images in InDesign from the 'images' as I did from "iPhoto" before?

  Browser multimedia lla only will show you photos from your photo library, if the library is your system library.  Check in Photos preferences > general, if 'use as a Photo library system' is UO greyedcrossed, as it should be.

  and the application must be fully compatible with El Capitan, or it can only show the iPhoto and Aperture libraries.  You may need to update your copy of inDesign. I don't know, if there is a newer version.