Mail send the program using PL SQL

Similar Questions

• Sending E-Mail with an attachment using PL/SQL

  Hello
  
  I am trying to send an E-Mail with an attachment using pl/sql on Oracle 9i.
  I found the code from the link below.
  

  http://www.orafaq.com/wiki/Send_mail_from_PL/SQL

  but the attachment it sends is defined in the pl/sql block.
  I want to attach a file in a different location. How can I do this?
  
  Thanks in advance

  If the attachment is also on the server (it must be on the server), you can load into a BLOB and which attach to your e-mail (you will need to create an Oracle Directory that points to the file to be attached).

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:255615160805 #68529763836665
  This thread is big enough, a ctrl + f there might give you some clues.

  Currently I do not have the mail api available on here, but I still have it on a "test/playground DB", so I'll take a look later, when I have time and place.

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• When you try to attach a PDF file as an object the WORD 2013 64 bit I'm estates following error: "the program used to create this object is AcroExch. This program is either not installed on your computer, or it does not. To change this, install AcroE

  When you try to attach a PDF file as an object the WORD 2013 64 bit I'm estates following error: "the program used to create this object is AcroExch. This program is either not installed on your computer, or it does not. To change this, install AcroExch or ensure that all the dialog boxes in AcroExch are closed. "even disabled protection at startup mode. Who made no difference

  Hi sdesk.

  This problem occurs with the 64-bit application as Acrobat is a 32-bit application making it incompatible to insert objects into a MS Word 64-bit application.

  As a workaround solution insert the object as a 'Create New' rather than create a file.

  

  Let me know if it helps.

  Kind regards
  Nicos

• In SQL Developer, is it possible to send the results of a sql statement?

  In SQL Developer, is it possible to send the results of a sql statement?

  Right-click on the query results pane, select "Export data" in the context menu, then select "xls".

• Send a Notification E-mail to the program manager?

  Can Eloqua send me (or others) a notification e-mail when someone enters a stage of the action to the program? Or when someone is following a certain path on a decision stage? And it could contain information about the user?

  Thank you.

  Hi Rob,

  Inside the program Builder, you can configure an action step to send a notification, but not in addition to any other action.  You might therefore be able to implement so that (using your example of decision rule) to hit the 'yes' the first step is the notification then the next step is the true 'yes' action, or a similar to the 'no' set according to what you're trying to get information from.  You can do either by configuring a normal e-mail message to hold the info you want, and then Quicksend email to a specific user and use domain merges to get information about the person who is going through step.  Or you could use the 'send members report to the owner of the process"and configure it to contain what you need.

  

  Thank you

  Lauren

• How do I change the program used to open mailto links in windows 8

  I would like to use Firefox to open Mailto links in Windows 8. I found this article of support, but it is not relevant for Windows 8: https://support.mozilla.org/en-US/kb/change-program-used-open-email-links?esab=a & as = aaq

  When I open Control Panel-> default programs and try to associate the Mailto with Firefox, the only options it gives me are "Mail" (the Metro app I'm moving away) and "seek an app in the store. No Firefox. How can I get Firefox to show up in the list of applications that can be associated with Mailto? Thanks much for any help.

  john99,

  OK, I am clear now. Thanks again for taking so much time to help. I am very grateful.

• Changes to the definition that is not reflected in the program using this control type.

  Hello

  I'm having a problem with a type definition, that once I have make changes by adding another element to the enum changes do not appear in the program and the program control is grayed.  I had this problem yesterday, but just decided to remove the type definition file and rebuild a new.  But today when I did change the enum in the program say it is disabled.  I joined the program and the control file.  I wish you to know why I'm having this problem since it seems to happen whenever I make a change to the control.  I am running LabVIEW 2010 on a Dell dimension 2400 using Windows XP with service pack 3 5.1.2600.  I was wondering if LabVIEW 2010 has all the questions running on XP which can cause this kind of problem.

  I tried your program in 2010sp1 and in 2011, and I have no problem. Once you modify the type definition and add items to the enum, the instances will become gray until you 'apply changes' or 'save' the typedef. After that, all instances of the typedef is updated with new items.

• Can not remove the program using the control panel

  A program on my Vista 64 bit abandoned work. I tried to add the same program before I deleted the previous version. Now I can remove or add this program.

  After watching further in this section, I found a similar question. The fix was to install Revo uninstaller. I had to use the forced uninstall to remove the program.

• purchase of the program used windows

  What are the backup set of the purchase of a windows vista program used by ebay? It's going to be no argument with web access and registration?

  If the packaging has been opened, you take your chance on this subject.

  If it is OEM and used, it cannot be used again on another computer.

  We cannot give you all the recommendations for the purchase of second-hand on the Internet.

  See you soon. Mick Murphy - Microsoft partner

• Parse the JSON using PL/SQL string

  I created a script that reads data from the Mobile App DB (which is based on MongoDB) of Oracle SQL Developer. The result is the string JSON stored in l_response_text VARCHAR2 (32767);

  The string has the format such as:

  
  

  [{"Postcode":"47100","OutletCode":"128039251","MobileNumber":"0123071303","_createdAt":"2014-11-10 06:12:49.837","_updatedAt":"2014-11-10 06:12:49.837"}, {"Postcode":"32100","OutletCode":"118034251", ..... ]
  
  
  
  
  

  However, I need to analyze this l_response_text such that each table will in his column in a table called appery_test. appery_test table has the same number of columns pairs JSON and in the same order (e.g. name of the first column is 'postal Code')

  I searched and I found most of the results on the analysis of the Oracle in JSON table and not the other way around. I found, however, that link which is somewhat similar to my problem. However, the library suggested in the answer doesn't have an example on how to use it to insert JSON into conventional table using PL/SQL.

  N.B.: I use g 11 and not 12 c. If the functions built by are not available for me.

  Thank you very much

  Sorry, I am a novice in this area too.

  However, it worked for me:

  declare

  l_list json_list;

  l_data CLOB;

  Code postal clob;

  l_val json_value;

  Start

  -json data recovery

  Select the data in l_data from jsons where id = 1;

  l_list: = json_list (l_data);

  I'm looping 1.l_list.count

  l_val: = json_ext.get_json_value (json (l_list.get (i)), 'Postcode');

  DBMS_LOB.CREATETEMPORARY (zip, true, 2);

  json_value.get_string (l_val, postal code);

  -Put some things

  dbms_output.put_line (DBMS_LOB. GetLength (Postcode));

  dbms_output.put_line (dbms_lob.substr (postal code, 20, 1));

  DBMS_LOB.freeTemporary (Postcode);

  end loop;

  end;

  47328

  9J / / 4AAQSkZJRgABAQAA

  Added dbms_lob.freetemporary (postcode);

• Cannot send the file using my direct email account

  set up my pop3 mail and the port, but the e-mail can not connect to the server, I use port 110 and 995

  Hi George,.

  I guess it's a problem with your email client & I will recommend you to contact your email service provider or to support the team of the email client so that they can help you set up your e-mail on the e-mail client.

  Let me know if you have any problem with Adobe Reader/Acrobat.

  Kind regards

  Nicos

• OutOfMemoryError: Limit superior GC exceeded when loading directly the source using IKM sql for sql. Growing ODI_MAX_HEAP do not solve the problem.

  OutOfMemoryError: GC overhead limit at execution a loading interface directly sql for sql with no work table.

  I get the error message: error: exception OutOfMemoryError: higher GC limit exceeded when executing an interface making a direct using IKM SQL for SQL command load Append, source a 150millions lines table.

  I have increased the ODI_MAX_HEAP and the interface run longer and failed. I'm already at: ODI_MAX_HEAP = 12560 m I tested with ODI_MAX_HEAP = 52560 m and still error.

  I am following up to the memory of the server and I still have available memory...

  Apart from the problem of memory I know that this type of load should be possible because the step of data load on LKM SQL to Oracle is able to load the work table $ CAN. Ideally, I want to emulate this behavior by using SQL for SQL IKM.

  1 - What is the right path to follow here? (change the parameters of memory or modify the IKM?)

  
  

  2 - ideas on how to solve the OutOfMemoryError: GC overhead limit exceeded error? (GC means Garbage Collector)

  Execution of the IKM interface in the Simulator generates this code:

  Load (Source) command:

  Select

  source - tbl.col1 COL1,

  source - tbl.col2 COL2,

  source-tbl. "' COL3 ' COL3

  of public.source - tbl AS source-tbl

  where

  (1 = 1)

  Default command (Destination):

  insert into the source-tbl

  (

  col1,

  col2,

  COL3

  )

  values

  (

  : COL1,.

  : COL2.

  : COL3

  )

  My experience is very limited with ODI so I don't know about changing the code to the KMs

  Thanks in advance.

  Find a work around the error of generals limit exceeded GC:

  -in my case I was running without the IDE so that changes made to the odiparams.sh were not useful.

  -This means that I need to change the JVM settings to:

  $ODI_HOME/oracledi/client/odi/bin/odi.conf

  AddVMOption - XX: MaxPermSize = NNNNM

  $$ODI_HOME/oracledi/client/ide/bin/ide.conf

  AddVMOption - XmxNNNNM

  AddVMOption - XmsNNNNM

  Where NNNN is a higher value.

• create the cookie using pl sql and retrieve values

  Hello
  I am currently in an urgent need to create cookies to BE oracle and also read the values of the. I tried to use code below. his display error
  code
  DECLARE
  ourcookie owa_cookie.cookie;
  BEGIN
  ourCookie: = owa_cookie.get('SESSION2');
  END;
  /
  
  BEGIN
  
  owa_util.mime_header ("text/html", FALSE ");
  
  -Create a cookie
  (owa_cookie). Send
  name = > 'SESSION. "
  value = > '344444',.
  expires = > sysdate + 2,.
  path = > ' / ');
  
  
  owa_util.http_header_close;
  
  EXCEPTION
  WHEN OTHER THEN NULL;
  
  END;
  
  
  But when I'm reading the cookie that I created, I am unable to exercise
  
  -It's for reading cookies
  DECLARE
  ourcookie owa_cookie.cookie;
  BEGIN
  ourCookie: = owa_cookie.get('SESSION2');
  END;
  /
  
  error:
  ORA-06502: PL/SQL: digital error or value
  ORA-06512: at "SYS." OWA_UTIL", line 325
  ORA-06512: at "SYS." OWA_COOKIE', line 36
  ORA-06512: at "SYS." OWA_COOKIE', line 140
  ORA-06512: at line 4 level

  842106 wrote:

  Now according to the guidelines of your comment, I created a simple OWA environment and run the code below. Now I get not found error of data

  ORA-01403: no data found
  ORA-06512: at line 23

  The error is caused the cookie is not found.

  The following is not valid - as there is no browser to receive the cookie:

  (owa_cookie). Send
  name-online "SESSION1"
  value-online '344433',
  expires => it sysdate + 2,.
  => path ' / '.
  );

  The following code must set the CGI environment - and add the cookie to the environment for the following code to read (as shown in the code example that I posted in the 2nd thread I talked to you):

  / * Initialization * /.
  OWA.cgi_var_name (1): = 'something ';
  OWA.cgi_var_val (1): = "other";
  OWA.init_cgi_env (1, owa.cgi_var_name, owa.cgi_var_val);
  / * End initialization * /.

  Of course, the following code will fail with a NO_DATA_FOUND there is no cookie.

  ourCookie: = owa_cookie.get('SESSION1');
  v_session: = ourCookie.vals (1);

  So it is not possible to create a true cookie and retrieve the value of CGI environment or apex not?

  Yes. But the web browser is non-existent. Then, you need create the CGI environment, which would have created the web server, before you call your allowed web code PL/SQL.

  In other words, if your initialization code of CGI should pretend that it is the web server, he received the call from web browser, it received the cookie (s) from the web browser - and now she needs to create the CGI (including cookies) environment for this web browser, and then call the procedure PL/SQL referenced by the browser in the URL, he argued.

• Windows live mail send the receipt does not work

  I clicked on the box in order to receive the receipt of sending emails that I send, but it won't let me know if the person has received or read. It used to work before but never stopped, I haven't changed the settings or anything like that

  Who sends a request to the recipient you would like confirmation. They are not obliged to do so.