Main application MFC Application has stopped working

Similar Questions

• Cannot use DVD BD Player: WIN DVD MFC application has stopped working

  Tried to install my old version of WinDVD and failed and in the process perhaps accidentally deleted a file,
  now every time I try and use DVD BD drive I get the following message:

  "WIN DVD MFC application has stopped working"

  I tried to use restore point, but still get it, can anyone advise please?

  It will be interesting to know what model of laptop you have.
  Anyway, in my opinion, there is a software conflict. I guess players use even modules or plug-ins, and there is a conflict.

  I put t know what solution can be, but maybe you should remove both players, restart your laptop and make own BD drive in the hope that it will work properly.

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• MFC application has stopped working

  I'm trying to run a program called PED-Basic, which is a program of embroidery used to display and write patterns of embroidery on a map.  When I try to open a file to display the content one small window pops up that says that MFC application has stopped working it will search for a solution, but then, it does not find a solution and it stops.  How can I solve this problem.  I run it on a laptop which has vista.

  Hello

  Try to run the PED Basic program as an administrator.
  Follow the steps as in the link to your PED Basic program:
  http://www.eeginfo.com/knowledgebase/entry/49/214/

  If the steps above fail then try a system restore and scan sfc from the link below:
  http://support.Microsoft.com/kb/936212

  All the best!

• SPCSCM MFC Application has stopped working.

  SPCSCM MFC Application has stopped working. A problem caused program stop working. Windows will close the program and notify solution.
  Please what is and how to fix it. Pop Windows comes back with no. Solutions.  Please help me. I am a novice to the computer and it's my first laptop.  Thank you so much

  Hello

  The application is your Sprint mobile broadband Launcher. You can try to uninstall and reinstall the application in case it is damaged.
  Go to control panel, click programs and features. Scroll to find the Sprint Mobile Broadband Launcher. Highlight and right click. You can choose to uninstall. Access the site Web of Sprint, then download the program again. Then right-click on the configuration file and, select run as administrator.

  This should get is successfully installed and see if you still have problems with the termination of the program.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem? IM using Vista Home Basic 32-bit.

  It comes with Vista, upgrade install and activate Forum.

  Try in Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon. Mick Murphy - Microsoft partner

• CTXfiHlp MFC Application has stopped working

  A small window opens when I log on Windows 7. The title is "CTXfiHlp MFC Application has stopped working". I close the window, and everything seems to work perfectly. He did this a certain time and I decided to try to find a way to get rid of him. I have given my response above, and perhaps figuratively it's Sound Blaster so I tried to update the drivers, but Windows says they are up-to-date.

  Here is the text of the detail section:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Ctxfihlp.exe

  Application version: 6.0.1.1348

  Application timestamp: 4c3473fc

  Fault Module name: ctxfispk. DLL

  Fault Module Version: 6.0.1.1348

  Timestamp of Module error: 4c3473fd

  Exception code: c0000005

  Exception offset: 00003 74 d

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Share your Creative Audio/logiciels drivers

  Any update of the driver would be obtained from the hardware manufacturer and not windows update

• Catalyst Control Centre: host application has stopped working disk failure / hard

  recently started to receive some ' catalyst control centre: host application has stopped working "or messages, usually, I get this message twice. When I started to get this message that I also had another saying of warning that there was an error with my drive hard as it had been corrupted, I think he said something as a "write-back" error message appeared, and I have since then lost most of my desktop icons, pictures, all my music files that I have composed and written , any word docs, etc.

  I tried a virus scan first, defragged my hard drive and tried some system restore points and was able to recover some, not all, desktop icons and my experience, but that's all. all my files are gone, I don't know if it's two separate issues or both part of the same issue, but I would like any info or suggestions on how to get my files back. I've saved over 2 years worth of music that I wrote that I really need to come back! Thanks for all comments and advice

  I just had the same thing happen. lost a lot of files. most is saved but we just moved and my backup HD are still packed. seems that there is a major conflict. check the file sizes in the main files, they are big like my files are there, but when I go down the root more that they are not and the file sizes in these folders don't add to the main folder above? I hope they are just invisible but recoverable. anyone with recommendations. I installed the mechanic system and my machine is stable again, but I get the error messages for the catalyst Center control and the dell support center. There may be a conflict between the 2 programs

• Error message "Xtray application has stopped working."

  I get the following error messages when I start my computer and enter the part of Windows Vista from the boot sequence.  I am able to close these error messages and works normally, but I fear that they could be a precursor to more serious problems later.  Anyone who understands what is perhaps the underlying problem and how to fix it would be greatly appreciated.

  Error messages

  1. "the procedure entry point? 0CAlert @ QAEQW4ALERT_TYPE@PAUHWND_@@HPB_W2222H2HH_N@Z not found in the Win32RenderingEngine.dll dynamic link library. »

  2. "XTray Application has stopped working".

  Google has no useful info relating to your problem.

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I fix windows 7 Catalyst control center host application has stopped working

  I received the error: Catalyst Control Centre: host application has stopped working. I uninstalled the Device Manager Catalyst Control Center and restarted - after uninstall and reboot I got the same message saying: Catalyst Control Center: the host application has stopped working - I also checked for driver updates in the Device Manager and the device manager says my driver updates are up-to-date.

  I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7.  You can go there.  It worked for me the first time after a lot of troubleshooting.

  How to solve the CCC is not loading/opening at initialization.

  Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.

  Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.

  Resolution: this solution has been tested - reproduced and resolved.

  Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:

  -Remove all ATI C:\programs files files and the C:\programs files (x 86)

  -Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is

  -associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode

  -mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.

  -Close and restart normally.

  -Reinstall the ATI Catalyst package.

  I hope that you will get in working order!

• "Share" feature in the Finder (or other applications) has stopped working.

  Use OS X El Capitan on a Mac Book Pro, the function in the Finder (or other applications) has stopped working "share."  From the Finder, I select a file and to 'Share', select say "Mail", nothing happens. Even when selecting other sharing options such as 'Notes', etc.  He used to work.  Now it is not.  In system preferences > Extensions all the sharing options are regularly controlled.  The same problem occurs in other applications such as Photos.  Selection of a photo and trying to "share."  Nothing happens, the application crashes. Does anyone have a solution?

  The Share button shows 'No. Service' or missing menu items?

  https://support.Apple.com/en-us/HT203129

  If this does not help, backup the computer and reinstall OS X El Capitan of OS X Recovery.

  https://support.Apple.com/en-us/HT204904

• Satellite L500 - DMIcheck application has stopped working

  Some of my drivers won't install givin message "DMIcheck application has stopped working" or similar for pInfo application...

  Same installation of 64 bit Windows 7 on another laptop didn't have problems like that.

  How to solve this?

  model laptop is L500 (short model No. PLJSHE)

  Hey,.

  To me that sounds like that the DMI information is missing, and if you get this error message...
  You use the Toshiba drivers directly?

  Usually the DMI information is missing, if the motherboard was exchanged and technicians forgot to re - write this information.
  In this case contact the guy again and they will do that for you! :)

• Satellite L500D-144 - CCC of the host Application has stopped working

  Ladies and gentlemen,

  My PSLT6E - 007004GR is almost a year.
  This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
  Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

  A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
  Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  Is it reproducible.

  Have already reported more customers or I'm the first?

  What can you do to the problem?

  Sincerely,

  CBluebaerchen

  Hello

  > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  To do this the display of Windows Update driver update?

  If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

  Otherwise, you can try running CCleaner. It can clean and fix registry problems.

• Satellite L300-1AQ - Bluetooth tray application has stopped working

  When I put my laptop it comes up with an error that says:

  * bluetooth tray application has stopped working *.

  A problem has caused the problem to stop working correctly.
  Windows will close the program and notify you if a solution is available.

  Anyone who has a solution?

  The laptop is a Satellite L300 - 1AQ
  Didn't it monthly!

  Please help, thanks

  XX

  Hello

  Have you tried to reinstall the battery Toshiba BT?

  Usually, this will help you get rid of this error message.
  Here you can download the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  First remove the old BT of the system software and after restarting again install the BT downloaded from the Toshiba BT page.

  Good bye

• Want to m6: Catalyst Control Centre: host application has stopped working

  Whenever I start my computer, I get the following message every time that a few months:

  "Catalyst Control Centre: host application has stopped working".

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Please how can I get rid of this or get whatever the problem is solved?

  Thank you.

  Hello

  Try to use Recovery Manager to reinstall your original graphic AMD software package - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  After reinstalling, restart the laptop.

  Kind regards

  DP - K