main control

Similar Questions

• Why do I get attention osd main controls locked and then key controls osd unlocked WARNING warning flashes always upward all few seconds

  I KEEP GETTING A WARNING CAUTION THAT SAYS OSD MAIN CONTROL LOCKED THEN IT SAY MAIN CONTROL UNLOCKED IT IS FLASHING ON THE SCREEN ALL THE TIME AND I DID NOT NO HOW TO GET RID OF HIM

  Philips monitor?

  http://www.P4C.Philips.com/cgi-bin/dcbint/cpindex.pl?CTN=190B6CS/75&DCT=FAQ&faqview=1&new_tmpl=1&refdisplay=MMFD_LCD_G_H6_QAC_10731&refnr=0010731&scy=NZ&SLG=Eng

• How to stop pop up "OSD MAIN CONTROLS LOCKED/UNLOCKED.

  How can I stop a pop up signal coming just in the middle of my screen and says "OSD MAIN CONTROLS LOCKED/UNLOCKED.

  Problems with OSD (menu appears and disappears at random or flashes "locked and unlocked" on and off - or other defects) are caused by the buttons themselves.
  These monitors (especially Philips) use poor quality buttons that after 2 or 3 years wear out and go semi short circuit. You can measure them with a meter.
  The permanent solution would be to replace the button (open the monitor, the solder then resolder) - A faster / less accurate fix would be to simply pull on the cable to the Panel of buttons inside and again without controls in total-, involving the opening of the monitor.
  You can still use the monitor without these buttons, automatic aid and outside.

• Im having trouble with something called main control center program 3 on my windows vista gateway labtop!

  well, I bought my labtop in jan 2009 since then until now, it works just great! I recentlly downloaded a program that I bought at my school called ADOBE CREATIVE SUITE 4 now, my computer had problems such as programs crashing, not being able to access the internet, and there's a screen that keeps poping up saying windows microsoft control program main centre 3 a work stoppage, does that mean? but I called microsoft tec, support the referd me towards another 1800 number they could not solve my problem yet once refferd to another number which has been a gateway, support center tec I still once they couldn't stop the last question but not less I had another number that was gateway main call center they stated "in order for me to get help I would have to pay. a price of $59.00 for 30 min and 199.00 for a lifetime warranty when all I need is to know how to get this frekin controll Centre 3 thing of my screen! She said it was a virous but a barley used my computer in addition to me lookin upward central control 3 and it does not say that it is a virous.

  ControlCenter3 might be associated with a Brother printer.

  The simplest solution would be to run the system restore and go back to a time before you download ADOBE CREATIVE SUITE 4.  Copy the file downloaded to external media (flash drive, hard drive, CD, DVD) to save it before you restore the system.

• Program main control Center 3

  I have a brother printer attached to my pc.  It prints fine, but can't scann to my pc.  A window pops up that says: Control Center 3 main program has stopped working.

  What should I do?

  http://www.brother-USA.com/support/

  Uninstall/reinstall the printer and make sure that it is fully compatible with Vista, and you have the latest drivers for Vista...

  For any other problems with it, contact the brother Support.

  See you soon.

  Mick Murphy - Microsoft partner

• In the Subvi VI main event

  Trying to raise events from a main vi.

  I created an example vi as a basic unit of a much larger program.

  The high level vi called a Subvi that contains a structure of the event.  The Subvi works permanently and will close when the program is stopped by the user.

  The upper level has controls that are passed to a global and overall can be read in the Subvi, which should trigger an event.  (it is not)

  The Subvi should be able to run as a Subvi or higher.

  For context:

  The project, of which this comes is a test system.  The Subvi prepresents the control panel main for the test system.  We want to automate the test system and so to use as a Subvi main control panel so we can automate a number of individual test.  (Frequency response, gain of linearity, etc..)

  See below for additional attachment that contains the file project and global variable (can attach only 3 files at a time)

  The overall is just a stop button and a cluster that contains 3 Boolean values.

  It does not work, I was hoping someone could explain to me how to do this without making many changes to the existing Subvi.  If necessary, a case statement could be added which is active when the program works as a Subvi, which would contain the code to raise events to the occurrence can cope.

  I'm looking at the code, now, I'll update the congratulations if it works

• How can I get media player to go was the task bar so I don't have to keep opening upward on the main screen please?

  I just had to recover my pc but now I downloaded the media player 11, but it is more on my taskbar as before. How to do this please.

  Hello

  I suggest you follow the step and check if it helps.

  a. right-click of the mouse on a zone empty of the taskbar.
  b. in the menu that appears, click Toolbars and then click Windows Media Player.
  c. then the Windows Media Player and then reduce it.
  d. the main control buttons appear on the taskbar. You can start playing, go to the next or previous song, pause and so on.
  e. the software in large format, click on the little logo of Windows Media Player.

  See also:

  To add a program to the Quick Launch bar: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/win_tray_add_program_quick_launch.mspx?mfr=true

  To add toolbars to the taskbar: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/win_tray_toolbar_add.mspx?mfr=true

• Button control Movie Clip

  I have a button on the script main control an animation that reside in a clip. I have a mask in the clip that opens and displays an image when the button is in the rollover State. I want the mask to close on the deployment status. If I do a Tween with her opening and closing an interpolation with her, when the rollsOut user of the button prematurely, he climbs to the last part of the open animation. I want it to be fluid. I don't know how to do that with actionscript, and I want my code to be on the main timeline. Here is an example of the code:
  
  tv_btn.onRollOver = function () {}
  tv_mc.gotoAndPlay ("Open");
  }
  tv_btn.onRollOut = function () {}
  tv_mc.gotoAndPlay ("Close");
  }

  www.gladstien.com/Files/sample_animation.fla

• Midi trigger

  I think to migrate from protools to logic, but there is a function that I don't see on the parameters of logic

  can I start to record from a midi or key elements?

  How can I do that.

  Thank you

  Yes you can - you can learn any assignment of midi keys to trigger the main controls (and recording is one of them).

  Below, I attributed a C2 key on my Midi Controller impulse to start the registration process...

  Click on the image if it does not work...

  

• HP ENVY X 2: HP ENVY laptop program errors stream

  A problem started five or six days, where the main control panel frame would open but does not display not all information on this image, and then kept IE gel and being a problem to close.  When stop a message appeared on the stop stop activity background task host window in any case.  Tried to update the computer without affecting the files then added support HP and Manager with no difference.  Antivirus protection says no problem then I analyzed the computer with this program and it told me that I had to add the extended program of it but when I down loaded it the computer said it was not good for the computer and I'll try another malware program this morning, but now my computer will not pass in front of me to sign but its not actually of the opening by hand now programs.  I only bought the computer 10

  Although Feb in the warranty period.  Tried the suggestion to start and press the ESC key, but nothing has changed.

  I wanted to have a professional look at it but can not contact HP for any warranty with regard to whether it will be affected or if I should send it to a favorite computer scientist.

  I guess what IM asking is someone there suggestions or similar cases?

  HI @sharbad

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that your laptop does not allow you to go beyond the sign on screen. Here is a link that should help you with this problem. Black or white screen with a blinking cursor after entering the Windows password.

  Another link that can help is the computer won't start (Windows 8).

  Because the laptop is less then a month, if supports the remains of question I suggest you to contact HP for assistance.  They can help to determine the possible causes to mitigate the problem or repair if necessary.

  Good luck!

• Multiple file operation

  Hello. I'm new to scripting Diadem and need to write a script to perform a task of processing of data on a large number of newspapers measure TDMS files (numbered sequentially). The script has to open each file individually (as they are very large), record the result in a new file, repeat for the following file and so on. I can't find any examples on the forum for Exchange or in the messages but apologies if it already exists.

  Anyone have a script simple example of something similar that I could change? I just need an idea of the main controls.

  Thank you very much

  Hi Mark_A,

  I have a script I can send you to do, but everything first, let me ask you a few questions.  What file formats are your incoming data files in?  If they are in one file other than CT or PDM, you already have a use that loads these files in DIAdem?  Can you send me some of your data files so that I can test the script before I send it?  You want to do any processing of the data in each data file is loaded in DIAdem, or you just want to re - write the data of DIAdem on the disc?  What is your desired output file format?

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

  [email protected]

• Strange behavior of the LoadLocalizedPanel Panel

  Hi all:

  When I use LoadLocalizedPanel to make my program with multilingual:

  void CVICALLBACK menu_English_Select_Click (menubar, menuItem int int, void * callbackData, Panel int)
  
  {
  
  	char buf [256] = "";
  
  	char bufABOUT [256] = "";
  
  char tmp [128] = "";
  
  	kal_uint8 strPath [MAX_PATHNAME_LEN];
  
  	kal_uint32 i;
  char    [MAX_PATHNAME_LEN] langFilePath;
  
      int     appLanguage;
  
      int     panelLLP, dialog, error = UIENoError;
  <>
  
          Returns - 1;
  appLanguage = ENGLISH;
  GetLocalLanguageFilePath (appLanguage, langFilePath);
  <>
  
          {
  
          If (error is UIEFileWasNotFound)
  
              {
  
              char errBuf [ERR_MSG_LEN];
  sprintf (errBuf, ' error loading Panel.  ") Cannot find the \nlanguage file \"%s\". " (', langFilePath);
  
              MessagePopup ('error', errBuf);
  
              }
  
          Returns - 1;
  
          }
  DisplayPanel (panelLLP);    If I DisplayPanel this Panel, it will be out of the control of  main didn't work
  RunUserInterface ();
  DiscardPanel (panelLLP);
  
  }
  
  

  If I "DisplayPanel" this Panel, it may change the language of my program, but it will all main control did not work. For example, if I click on the button (belong to main) to select the file to open, the chain control cannot have that wire path and if I click on the button (belong to main) to do something, he does the effect too.

  If I annotate it(//DisplayPanel (panelLLP) it only changes the language of the menu bar and no tongue. the main but all main control works properly.)

  Why is - this problem appear?

  Behavior of strage DefaultPanel/DefaultCtrl on panel located
  http://forums.NI.com/T5/LabWindows-CVI/strage-behaviour-of-DefaultPanel-DefaultCtrl-on-localized-pan...

  It is a reminder for a control on an existing group, right?

  In which case, you should not call RunUserInterface once: the problem you are experiencing may derive from this.

  In addition, if you want to locate the active panel, you can simply use LocalizePanel by passing the handle to the existing Panel, without the need to load again: the original panel and the newly loaded otherwise is cohexist in memory and on the screen until you explicitly throw one of them.

• No vertical scroll bar in my def of type strict?

  Not sure why, but my bar vertical scrollbar in my table seems to disappear.  I activated too.  Anyone know what gives?

  Thank you!

  

  I guess that you moved it under main control while customizing the typedef.

  Open the window-> show window parts, find Y scrollbar in the list, it will highlight it. Move with the arrow keys or enter the coordinated outdoor main command.

• I built a simple motion using LabVIEW Vision Assistant detector. Could someone suggest improvements to it?

  This is one of my first projects LabVIEW, and it's just a simple motion detector.

  Could someone suggest improvements, please?

  As to improve the clarity of the image, reduce noise, etc.

  I used the truncated FFT and it reduces noise well, but moving objects is reduced to blobs.

  My included VI has 2 main controls:

  (1) multiplier brightness (default: 1)

  (2) gain (default: 10)

  Hello

  You'll find them at the stage of analysis of particles

  .

• Access loop in Subvi pls help

  [Beginner] In my vi call there is a sub vi which is actually a while loop with a lot of loops and structures inside.

  I want to start and stop the sub vi of the calling VI only. But the while loop in the sub vi takes only the first value in the main control of vi.

  essentially the first picture is a model of the Sub vi (with all the structures inside it removed) and the appellant vi.

  the sub vi should begin only if the initial value of boolean is true.

  Help, please

  Have mentioned such reference, or transfer data via events (which case we go the event thread instead) or my favorite, a motor of Action (AE). In the latter case your main vi writes data to an AE and sub - vi reads from it.

  I think Ben has a great nugget on AEs.

  /Y