Maintenance mode migrates virtual machines only from GUI

Similar Questions

• Migrate virtual machines from HP G7(single host) for HP G8 (Cluster) without shared storage

  Hello

  I have 2 esxi host (hp dl 380 G8) and put them in a cluster and other host esxi (dl 380 g7) and I have no shared storage and use local disks just now I must spend my VM G7 server a cluster of the G8 but I want to know I can join my cluster g8 g7 and migrate web vmware machines without any downtime?

  I want to know can migrate without downtime with localdisk? I have no shared storage

  Best regards

  BAbak

  can I join g7 to my cluster of the g8

  You can mix into clusters hosts all desired, even Intel and AMD at least that you enable EVC on the cluster (of course, HA or DRS require shared storage compatible/CPU). However, you need not to have even just cluster hosts to migrate virtual machines through vMotion between them.

  migrate web vmware machines without any downtime?

  Don't know what this "web vmware' but yes, because ESXi 5.1, you can use"enhanced vMotion"to live migrate virtual machines without service interruption from one host to another, even without shared storage:

  Migration with vMotion in environments without shared storage

  The usual vMotion requirements apply. Also you can only live migrate virtual machines from the old host to the new hosts because of different generations of CPU (and back as long as you don't have bike powered virtual machines on new hosts).

• Unable to migrate virtual machines from one ESX to another in a cluster

  I have 7 ESX in a cluster... 2 ESX are unable to migrate virtual machines into and out of the host... When we try to perform a manual migration, it displays the following error...

  Impossible to pass. Host CPU is not compatible with the requirements of the Virtual Machine to CPUID level 0 x 80000001 registry "edx" host bits: 1110:1111:1101:0011:1111:1011:1111:1111 required: 11 x 0:1 x 11: 1100:0011:1111:x 0x1: 1111:1111 inconsistency detected for these characteristics: * NX/XD (data execution protection). If the Virtual Machine does not have this feature, power off the virtual machine and delete the requirement of NX/XD by changing the settings of the virtual machine (advanced options).

  Looks like 2 of the 7 ESX has disabled NX/XD (or could be activated I don't know which) in the BIOS of the Server - VMware allows you to maske this characteristic shape the VM so it can vmotion between these hosts - initially put there where the NX/XD bit became more popular in order to allow users to migrate between these hosts with different parameters CPU-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• PowerCLI Script to migrate virtual machines with the same network Source for the new vCenter Server.

  Hi all

  I checked a few posts on the migration to the new vCenter Server virtual machine. But I'm not very good with Powercli and need some help here.

  We have a new vCenter server where we migrate virtual machines from one source vCenter server. Here are two things that I don't know how to connect together to make sure that bwfore we turn on the virtual machine to the virtual machine is connected to its source network.

  Part 1 - this script works well but do not get any network on the vCenter destination.

  cluster = Get-Cluster "clusterA.

  $inventory = get-Cluster $cluster | Get - VM | Add-Member - MemberType ScriptProperty-name "VMXPath" - value {$this.extensiondata.config.files.vmpathname}-Passthru-Force | Select-Object Name ResourcePool, folder, VMXPath |

  $inventory | Export-Csv c:\file.csv

  $inventory = import-csv c:\file.csv

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  Part 2 - I want to preserve the Portgroup macaddress and the Ip of the virtual computers and connect them to the new vCenter. How can I do this with the script below. Or how can I combine them together?

  $vm_list = get-Cluster-name "clustera | Get - VM test * | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  Step 2

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-RunAsync Verbose - confirm: $false

  Step 3

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool.Name

  New-VM - ResourcePool (ResourcePool-Get-name $resource_pool) VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  Step 4

  # Put the network cards

  foreach ($info in $inventory)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose-RunAsync-confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null}

  }

  Thanks in advance for any help.

  Hi all

  I made some changes to the script and it worked for me. We have added a host on the destination with all exchanges and storage mapped vCenter.

  $vm_list = get-Cluster-name 'Site B - b | Get - VM | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-Verbose - confirm: $false

  $cluster = get-Cluster "Site A - clustera.

  {foreach ($vm to $information)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm.path - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool

  New-VM - ResourcePool (ResourcePool-Get-name "test1") VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  # Put the network cards

  .

  foreach ($info in $information)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose - confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null

  }

  Hope this will help many of you.

• migrate virtual machines between linked vcenters 5.1

  Hi all, is it possible? can I migrate virtual machines to different servers of vcenter ├a the State of related modes? Thank you

  If you want to try to move to a different data store, then you can consider V2V as well.

• migrate virtual machines to esxi 3.5 free vsphere 4.1 without vcenter

  Hi all

  I have vms on 2 hosts esxi 3.5 with direct (without san)-attached storage that I want to migrate to a new server esxi under license of 4.1 vsphere essentials. I intend using the stand-alone converter to migrate virtual machines from 3.5 to 4.1 and then upgrade the other two hosts to 4.1 and then moving some virtual machines using the converter.

  I have Web servers that I don't want to bring down more than 10 to 20 minutes (not the 1 to 2 hours that should be a cold conversion with converter) so I try to use the feature p2v on the virtual machine running Web servers.

  Has anyone done this with no san and no vcenter? If so how did you do?

  is it possible to migrate without losing configurations of network adapter in the virtual machine?

  I can just do something like taking a snapshot of the system of runnying, then copy files to new host, then add to the inventory, upgrade tools, hardware upgrade?

  Thank you!

  is it possible to migrate without losing configurations of network adapter in the virtual machine?

  After you copy the files and re - add to inventory new virtual machine, you must take care on the issue of handgun that you see in the market.

  Choose I_moved the files to keep the VM UUID and the same virtual MAC address.

  André

• Create a new vsphere environment 6 and migrate virtual machines to esxi existing 5.1

  The current environment has a cluster with 5.1 esxi hosts and vcenter server 5.5-controlled.

  I would like to create a new environment vsphere 6 with new hosts. Again I mean a clean install of vCenter server 6 and esxi, implementation of the new cluster, etc.. So I won't be able to migrate virtual machines running in 5.1 esxi hosts to the new environment.

  What would be the appropriate steps to make this right?

  Thank you.

  Take a look at this KB on how to move an ESXi host at another vCenter vSphere: VMware KB: move a managed ESX ESXi host to a vCenter Server to a different Server vCenter

  And if you are using vDS, you should look here: KB VMware: ESX/ESXi host with vDS passing a vCenter Server to another

• Maintenance mode migrates is most Virtual Machines running

  Anyone know why they kidnapped the VMotion feature automatically running and stop virtual machines on a host that is put in Maintenance Mode?  Since a recent installation of vSphere 4, I noticed a host in maintenance mode will migrate VMs that are stopped, but not running VMs.  I was wondering if anyone else has noticed this and maybe knows why?

  Thank you!

  I had this same problem with vSphere 4 until I finally realized I had to change the settings of CAC on the cluster.

  Please graphics to order the 2 below. I think you'll see the error message then the resolution in the second chart.

  If this action was resolved for you, please reward me with the correct answer.

  Thank you!

  David Davis, vExpert, VCP, CCIE

  Author of videos of VMware ESX Server Train Signal available at the training seminar:

  http://www.TrainSignal.com

  Also visit my personal website:

  http://www.VMwareVideos.com

  

  

• migrate virtual machines from view 5.1 5.2 view Horizons

  Rather than upgrade my current view 5.1 deployment, I'm looking to the installation environment a separate Horizon view 5.2 to migrate to. (1 VCS and 1 VSS)  My users are on dedicated desktop computers that I want to keep during the migration to the new environment.  Is it possible to add desktop computers in a pool without using the template for the pool?   What is the best way to do it?

  Thanks in advance.

  This depends a lot on whether the pool of dedicated assignment users using right now cosists of related or desktop full clone clones. If you use clones related, there are not many things can be done, except so use the Windows Easy Transfer utility to export the profiles of existing virtual machines, hover over the users to a new pool and then use WET to restore their profiles. In addition, if you use Persona for the existing pool, which would save the profile and settings, but any installed application would go when users have been moved to the new linked clone pool.

  If you use full clone desktop computers, you could remove the portal administrator existing display, but not delete disk can create a pool of manual in the new portal administrator display and add the desktop full clone existing to the new pool. This assumes that the old display environment and a new share a common vCenter Server and underlying hosts. Otherwise, you will need to pass a complete clone of a vCenter to another (probably by exporting an ovf of this virtual machine) and then import it into the new.

  I think that there are options, but none of them are ideal. In any case, it would be a good idea to use something like the WET utility to ensure that you have a valid backup of the user's profile before you do anything else.

• Manually migrate virtual machines from the host is not responding.

  I have a 3 host cluster.  One of the guests became unresponsive.  Continue to run all the virtual machines connected to the host is not responding and I can't RDP for them.  I am able to SSH to the host does not respond, but not connect via vCenter.

  Restart the services will cancel the virtual machines running?  If this isn't the case, then what is the command to restart the services?

  What is the best plan to manually migrate those virtual machines for the other two hosts?

  SSH, cd to \usr\sbin, then run "services.sh restart" (without the quotes). Which will restart management services, with no impact to your VM. Then you should be able to re - connect with Vcenter.

• How to migrate virtual machines from the virtual server MS in Lab Manager?

  We migrate our environment. So primary question is - how to migrate our MS VirtualServer VMs to Lab Manager?

  BR

  Hello

  Have you tried using using VMware vCenter Converter?  It can take Virtual PC machines and turn them into VMs VMware (.vmdks), you should then be able to manufacture models of VMware virtual machines, import them into the Lab Manager and voila.

• vCenter roles and privileges to migrate virtual machines

  I created a custom role named 'Build VMs' that I have assigned to an ad group.  This role is assigned in the data centers, all spread and no. folder where elsewhere.  The role was designed to allow a specific group of users to manage virtual machines (create, move, delete, but not clone, etc.).

  For the most part, it works fine, but I have a problem: they cannot migrate powered off VMs.  vMotion is available and works, but I need to move a cluster virtual machines to a different (more old hw & 3.5 to new hw & 4.1).

  The role has the following privileges:

  Name                                Id
  ----                                --
  Anonymous System.Anonymous
  View System.View
  Read System.Read
  Create the folder Folder.Create
  Allocate space Datastore.AllocateSpace
  Update of virtual machine files Datastore.UpdateVirtualMachineFiles
  Configure Network.Config
  Affect the Network.Assign network
  Change DVSwitch.Modify
  Operation of DVSwitch.PortConfig port configuration
  Setting of port DVSwitch.PortSetting operation
  Change DVPortgroup.Modify
  Create the virtual machine Host.Local.CreateVM
  Reconfigure the virtual machine Host.Local.ReconfigVM
  Create new VirtualMachine.Inventory.Create
  Create existing VirtualMachine.Inventory.CreateF...
  Register VirtualMachine.Inventory.Register
  Delete VirtualMachine.Inventory.Delete
  Unregister VirtualMachine.Inventory.Unregister
  Move VirtualMachine.Inventory.Move
  Power VirtualMachine.Interact.PowerOn
  VirtualMachine.Interact.PowerOff power off
  Suspension VirtualMachine.Interact.Suspend
  Discount to zero VirtualMachine.Interact.Reset
  Question answer VirtualMachine.Interact.AnswerQu...
  Console interaction VirtualMachine.Interact.ConsoleI...
  Device connection VirtualMachine.Interact.DeviceCo...
  Configure support CD VirtualMachine.Interact.SetCDMedia
  Configure floppy media VirtualMachine.Interact.SetFlopp...
  VMware Tools install VirtualMachine.Interact.ToolsIns...
  Buy tickets to control comments VirtualMachine.Interact.GuestCon...
  Defragmentation of disks all VirtualMachine.Interact.Defragme...
  Turn on the VirtualMachine.Interact.CreateSe of fault tolerance...
  Disable VirtualMachine.Interact.TurnOffF of fault tolerance...
  Test failover VirtualMachine.Interact.MakePrimary
  Restarting the VM VirtualMachine.Interact.Terminat secondary...
  Disable VirtualMachine.Interact.DisableS of fault tolerance...
  Enable fault tolerance VirtualMachine.Interact.EnableSe...
  Record session on Machine virtual VirtualMachine.Interact.Record
  Review the session on virtual computer VirtualMachine.Interact.Replay
  Backup operation on a virtual machine VirtualMachine.Interact.Backup
  Create a screenshot VirtualMachine.Interact.CreateSc...
  Rename VirtualMachine.Config.Rename
  Add a disk existing VirtualMachine.Config.AddExistin...
  Add the new disk VirtualMachine.Config.AddNewDisk
  Remove the VirtualMachine.Config.RemoveDisk disc
  Raw device VirtualMachine.Config.RawDevice
  Host VirtualMachine.Config.HostUSBDevice USB device
  Change the number of CPU VirtualMachine.Config.CPUCount
  Memory VirtualMachine.Config.Memory
  Add or remove devices VirtualMachine.Config.AddRemoveD...
  Change the settings of the device VirtualMachine.Config.EditDevice
  Parameters VirtualMachine.Config.Settings
  Change resources VirtualMachine.Config.Resource
  Updating of the virtual hardware VirtualMachine.Config.UpgradeVir...
  Reset the VirtualMachine.Config.ResetGuest customer information...
  Advanced VirtualMachine.Config.AdvancedCo...
  Lease of disk VirtualMachine.Config.DiskLease
  Swapfile placement VirtualMachine.Config.SwapPlacement
  Extend the virtual disk VirtualMachine.Config.DiskExtend
  Change disk monitoring VirtualMachine.Config.ChangeTrac...
  Unlock the virtual machine VirtualMachine.Config.Unlock
  Queries files without owner VirtualMachine.Config.QueryUnown...
  Reloading the way VirtualMachine.Config.ReloadFrom...
  Compatibility VirtualMachine.Config.QueryFTCom of the fault tolerance of queries...
  Customize the VirtualMachine.Provisioning.Cust...
  Promote records VirtualMachine.Provisioning.Prom...
  Deploy the model of VirtualMachine.Provisioning.Depl...
  Clone model VirtualMachine.Provisioning.Clon...
  Mark as virtual machine VirtualMachine.Provisioning.Mark...
  Read about the customization VirtualMachine.Provisioning.Read...
  Edit the VirtualMachine.Provisioning.Modi customization specifications...
  Allow access to the disk VirtualMachine.Provisioning.Disk...
  Allow access to the read-only disc VirtualMachine.Provisioning.Disk...
  Assign the virtual machine resources... Resource.AssignVMToPool
  Migrate from Resource.HotMigrate
  Query vMotion Resource.QueryVMotion

  It is the main thing I thought it would take to a simple move of a virtual machine while it is turned off:

  Name                                Id
  ----                                --
  Move VirtualMachine.Inventory.Move

  I gave to create a folder because some of the permissions were not yet allowing the creation of virtual machines, even though it probably isn't necessary.

  Any ideas?

  ~ Luc
  http://thephuck.com

  What happens if you add resources > permission to move?

• Best way to migrate virtual machines to new ESXi hosts with a different configuration of networking.

  We currently have a cluster of 6 Dell machines that move VM 120 or so on ESXi 5.5. Networking consists of a dVswitch with 6 uplinks that map to 6 x 1gig physical NETWORK adapters on each host ESXi... These are grouped into 3 trunks / gal, so we have 2 GB by SHIFTING of the bandwidth and failover. The LAGS are configured as follows:

  LAG1

  Traffic to our (NFS) shared data store and management of ESXi. (vmk0)

  LAG2

  Access to the network of the VM - groups of different ports on different VLANS

  LAG3

  vMotion (vmk1)

  We just bought 6 new Dell machines that have connections fiber 2 x 10gig each. The idea is to bring together in a 20Ggig LAG by machine that will handle all of the traffic, so traffic NFS data store, network traffic from the VM, vMotion and traffic management ESXi.

  
  

  What is the best way to migrate the virtual machine in the cluster existing to the new machines? Many of the virtual machine are essential, so we cannot stop time.

  
  

  Can I create the new DELAY on existing dVswitch and put it as an auxiliary card? I'll be able to do it for all 3 of the above both above LAGS?

  
  

  Thanks for the info Alistar, it's almost here. The bit that was me stumping was that after establishing a new dVswitch I received messages that the new dvSwitch was not reachable on the old host, when I tried to migrate the virtual computer.

  The solution (with the permission of VMware Support) was that I need to add the two dVswitches to one of the old hosts, then assign a physical alternative on this host uplink to a temporary 3 uplink on the new dVswitch. I then tag all the relevant VLAN that uplink.

  This way I can first migrate the virtual machine to the new dVswitch networking so I can move the computer to the new cluster.

  Obviously I can only migrate from old to new cluster with a single host. each virtual machine must be a double for the host with 2 switches, and then to the new cluster. I also had to have the two dVswitches to the same version.

  Fortunately, I had a physical rising spare on the hosts of the old, otherwise I would have had to break one of the trunks and re-use of one of these uplinks.

  Oh and be aware, impossible to use the same names for groups of ports 2 DV switches, they must be unique!

  Nick

• Migrated virtual machine appears in the two data stores

  Hi all

  A bit of background on our installation first. servers ESX 3.5 vcenter 4.0 (just improved 2.5) + 2 + 2 data warehouses configured in 1 box of MSA.

  Here is what happened. I've migrated a VM from A to B data store using "Migrate" in vSphere client on vCenter.

  On the vSphere client, virtual machine displays now two data warehouses. In the browser data store, the vme even appears in the two data stores. Datastore shows 20 GB to 20 GB provisioned and 0 GB to 20 GB used. B displays 20 of 20 put into service and used 20 20 GB.

  Migration seems to have succeeded. I migrated about 10 other vm and they reside only on a data store. All virtual machines are working properly. I tried to migrate the computer back to A virtual. He showed only a data store. But the problem appeared again when I migrated the vm to B. I tried to move the virtual machine back and forth between servers ESX, no difference.

  Any ideas? The virtual machine is working well, and it is not necessarily a critical problem. But it's annoying, because I intend to reorganize the data store has and the fear it could cause a problem.

  Thank you so much in advance!

  anything mounted on the CD/DVD drive, as an ISO which can be on A Datastore?

• Customization of the comments for the virtual machines deployed from model has stopped working

  Hi all

  (Environment: vCenter and ESXi 10 5.1 hosts running Build #3070626)

  We have a model 2012R2 and a file specification of customization that allows us to deploy the VMs 2012R2 server. It worked well for a while. After the Christmas break, it seems more work correctly and we havn't knowingly changed anything to cause this. We have fixed our ESXi hosts Build #3070626 October 6, but have deployed VMs of model since, without problem.

  We have all staged for the VM in advance (IE AD entry of objects and DNS). And then powered the deployed virtual computer, sysprep runs, but does not seem to apply settings in the customization file (IE rename the virtual computer, set the Admin password, join the domain etc.). If feed us the cycle of the VM, sysprep is running again, but even once, does nothing.

  I have attached the contents of my file guestcust.log of a computer deployed virtual (see below), but I do not see the clues about the problem. I thought initially the error on the first line was important, until I've found it is also present on the virtual machines that have been successfully deployed from this template in the past, so it's maybe a Kipper.

  Does anyone have advice for troubleshooting this?

  TIA

  Mark

  ==========

  guestcust.log

  ==========

  Could not query value reported in the registry (the system cannot find the file specified.)

  Sysprep from Windows Respecialize operating detected.

  Copy the files from C:\Windows\TEMP\vmw7DEB.tmp to C:\Windows\TEMP\vmw8A3E.tmp.

  Rescheduling of customization of the guest operating system.

  "Executing command C:\Windows\system32\schtasks.exe / create /sc ONSTART $ more HIGH/np/z v1 /ru SYSTEM /tr" C:\Windows\TEMP\vmw8A3E.tmp\guestcustutil.exe customize - sealparam \"/quiet/generalize/oobe /reboot\ ' NIC - 4000 - schedulenativeunobfusc ' /tn"VMware Guest OS task of customization.

  At the request of guest OS customization task invoked.

  Remove scheduled task of customization of the guest operating system.

  Execution of command C:\Windows\system32\schtasks.exe, /f/delete /tn "VMware Guest OS task of customization"

  Personalization current 2016 to 1 - Feb - 11 18:32:42

  RPCI: Send request = 'deployPkg.update.state 4 C:\Windows\TEMP\vmware-imc\guestcust.log 0'

  RPCI: Envoy = 'deployPkg.update.state 4 C:\Windows\TEMP\vmware-imc\guestcust.log 0' request, response = ", len = 0, status = 1

  Key successfully open SYSTEM\CurrentControlSet\Control\Session Manager\

  Size of 27 reg_multi_sz.

  Read the multi_sz registry autocheck autochk/q/v value *, size 27.

  value chain of registry autocheck autochk/q/v *.

  1 items back

  Obtained the session mgr BootExecute.

  Native App sysprepDecrypter.exe, arguments "

  Copied file sysprepDecrypter.exe to C:\Windows\system32\sysprepDecrypter.exe

  Update boot run value.

  Created / opened key \Guest Customization\ SOFTWARE\VMware, Inc. successfully.

  New shoe, run:

  autocheck autochk/q/v *.

  sysprepDecrypter.exe

  System drive: C:

  Move the folder "sysprep" to "C:".

  Select * from win32_networkadapter where manufacturer! "Microsoft" and ServiceName =! = "VMnetAdapter" and the manufacturer is not null and MACAddress is not null

  1 objects found. Pointer f049a8. return code 0(0x0)

  "" "0 items found." " Pointer to 0. return code 1(0x1)

  00:50:56:B0:70:46 the value for the property return system

  Setting dhcp for nic # 0

  Return value \\VMT-W2K12R2\ROOT\CIMV2:Win32_NetworkAdapter.DeviceID="10' for the system property

  ASSOCIATORS OF {\\VMT-W2K12R2\ROOT\CIMV2:Win32_NetworkAdapter.DeviceID="10"} where ResultClass = Win32_NetworkAdapterConfiguration

  1 objects found. Pointer eee290. return code 0(0x0)

  "" "0 items found." " Pointer to 0. return code 1(0x1)

  Clear the gateway ip addresses.

  Enabling DHCP on the computer

  Returns the value for the system property \\VMT-W2K12R2\ROOT\CIMV2:Win32_NetworkAdapterConfiguration.Index=10

  DNS server IP configuration

  Execution of command C:\windows\system32\sysprep\sysprep.exe/quiet/generalize/oobe/reboot /unattend:C:\sysprep\sysprep.xml

  Successfully executed the command C:\windows\system32\sysprep\sysprep.exe/quiet/generalize/oobe/reboot /unattend:C:\sysprep\sysprep.xml

  Try to connect network interfaces, try 1

  RPCI: Send request = 'deployPkg.update.state 4 103 C:\Windows\TEMP\vmware-imc\guestcust.log@4000'

  RPCI: Envoy = 'deployPkg.update.state 4 103 C:\Windows\TEMP\vmware-imc\guestcust.log@4000' request, response is "queryNicsSupported", len = 18, State = 1

  Got answer VMX 'queryNicsSupported '.

  RPCI: Send request = 'deployPkg.update.state 4 104 C:\Windows\TEMP\vmware-imc\guestcust.log@4000'

  RPCI: Envoy = 'deployPkg.update.state 4 104 C:\Windows\TEMP\vmware-imc\guestcust.log@4000' request, response = 'connected', len = 9, State = 1

  Got VMX response "connected."

  Network interfaces are connected to 0 seconds

  =============================================

  OK, I myself fixed the end.

  I created a new customization file with exactly the same settings as the old file, and it worked. I can only assume that the old customization file has been altered somehow.