migrate virtual machines between linked vcenters 5.1

Similar Questions

• Is it possible to migrate a virtual machine between vcenter servers programmatically?

  Hi all

  My question is quite simple:

  -Is it possible to migrate a virtual machine between vcenter servers programmatically?

  Let's say we have two data centers:

  vcenter1

  -vm1

  -vm2

  vcenter2

  -vm3

  Is it possible to migrate vms between vcenter2 and vcenter1 programmatically? (or vice versa)?

  Also, I'm assuming that the appropriate VLAN and data warehouses across the different vcenters!

  Thank you

  Luis

  It is not possible, vMotion or migration live is in an instance of vCenter, it cannot be covered through two even if you have the data store accessible both vCenters and sets of the host. At best, you can unregister the virtual machine of vCenter 1 host and re-save as on vCenter 2 host, but once again, it is while the virtual machine is turned off.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Migrate virtual machines from HP G7(single host) for HP G8 (Cluster) without shared storage

  Hello

  I have 2 esxi host (hp dl 380 G8) and put them in a cluster and other host esxi (dl 380 g7) and I have no shared storage and use local disks just now I must spend my VM G7 server a cluster of the G8 but I want to know I can join my cluster g8 g7 and migrate web vmware machines without any downtime?

  I want to know can migrate without downtime with localdisk? I have no shared storage

  Best regards

  BAbak

  can I join g7 to my cluster of the g8

  You can mix into clusters hosts all desired, even Intel and AMD at least that you enable EVC on the cluster (of course, HA or DRS require shared storage compatible/CPU). However, you need not to have even just cluster hosts to migrate virtual machines through vMotion between them.

  migrate web vmware machines without any downtime?

  Don't know what this "web vmware' but yes, because ESXi 5.1, you can use"enhanced vMotion"to live migrate virtual machines without service interruption from one host to another, even without shared storage:

  Migration with vMotion in environments without shared storage

  The usual vMotion requirements apply. Also you can only live migrate virtual machines from the old host to the new hosts because of different generations of CPU (and back as long as you don't have bike powered virtual machines on new hosts).

• Replicate a virtual machine between an Intel host computer and an AMD

  Does anyone has experiences with using vSphere replication to replicate a virtual machine between Intel server cluster and a cluster of servers AMD?

  I asked myself this question the other day and unfortunately I have Intel hosts in my lab to test/demo so can not perform checks...

  I know that the only safe way to migrate a virtual machine from one host to Intel to a host of AMD is to use migration cold (ie the power off of the virtual computer), but that also applies if you use replication as a tool of "migration."

  I am aware vSphere replication can occur only if the source THAT VM is turned on, as it will make a copy of the initial/seed and then use CBT for replication of the changes... but because the goal of VM is turned off, I am correct in assuming that it is a form of "cold migration"?

  It works with the solution of Veem replication with VMware hosts.

  Reference:replication requirements. See the topic

  It seems to even work with Hyper V - replica.

  Hyper-V R2 2012 replica from INTEL to AMD? -Spiceworks

  In my view, this works for vSphere same replication as well. However, I will stay here with confirmation.

  --------------------------------------------------------------

  If it is useful, please give points as correct or useful

• Unable to migrate virtual machines from one ESX to another in a cluster

  I have 7 ESX in a cluster... 2 ESX are unable to migrate virtual machines into and out of the host... When we try to perform a manual migration, it displays the following error...

  Impossible to pass. Host CPU is not compatible with the requirements of the Virtual Machine to CPUID level 0 x 80000001 registry "edx" host bits: 1110:1111:1101:0011:1111:1011:1111:1111 required: 11 x 0:1 x 11: 1100:0011:1111:x 0x1: 1111:1111 inconsistency detected for these characteristics: * NX/XD (data execution protection). If the Virtual Machine does not have this feature, power off the virtual machine and delete the requirement of NX/XD by changing the settings of the virtual machine (advanced options).

  Looks like 2 of the 7 ESX has disabled NX/XD (or could be activated I don't know which) in the BIOS of the Server - VMware allows you to maske this characteristic shape the VM so it can vmotion between these hosts - initially put there where the NX/XD bit became more popular in order to allow users to migrate between these hosts with different parameters CPU-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• PowerCLI Script to migrate virtual machines with the same network Source for the new vCenter Server.

  Hi all

  I checked a few posts on the migration to the new vCenter Server virtual machine. But I'm not very good with Powercli and need some help here.

  We have a new vCenter server where we migrate virtual machines from one source vCenter server. Here are two things that I don't know how to connect together to make sure that bwfore we turn on the virtual machine to the virtual machine is connected to its source network.

  Part 1 - this script works well but do not get any network on the vCenter destination.

  cluster = Get-Cluster "clusterA.

  $inventory = get-Cluster $cluster | Get - VM | Add-Member - MemberType ScriptProperty-name "VMXPath" - value {$this.extensiondata.config.files.vmpathname}-Passthru-Force | Select-Object Name ResourcePool, folder, VMXPath |

  $inventory | Export-Csv c:\file.csv

  $inventory = import-csv c:\file.csv

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  Part 2 - I want to preserve the Portgroup macaddress and the Ip of the virtual computers and connect them to the new vCenter. How can I do this with the script below. Or how can I combine them together?

  $vm_list = get-Cluster-name "clustera | Get - VM test * | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  Step 2

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-RunAsync Verbose - confirm: $false

  Step 3

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool.Name

  New-VM - ResourcePool (ResourcePool-Get-name $resource_pool) VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  Step 4

  # Put the network cards

  foreach ($info in $inventory)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose-RunAsync-confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null}

  }

  Thanks in advance for any help.

  Hi all

  I made some changes to the script and it worked for me. We have added a host on the destination with all exchanges and storage mapped vCenter.

  $vm_list = get-Cluster-name 'Site B - b | Get - VM | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-Verbose - confirm: $false

  $cluster = get-Cluster "Site A - clustera.

  {foreach ($vm to $information)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm.path - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool

  New-VM - ResourcePool (ResourcePool-Get-name "test1") VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  # Put the network cards

  .

  foreach ($info in $information)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose - confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null

  }

  Hope this will help many of you.

• Create a new vsphere environment 6 and migrate virtual machines to esxi existing 5.1

  The current environment has a cluster with 5.1 esxi hosts and vcenter server 5.5-controlled.

  I would like to create a new environment vsphere 6 with new hosts. Again I mean a clean install of vCenter server 6 and esxi, implementation of the new cluster, etc.. So I won't be able to migrate virtual machines running in 5.1 esxi hosts to the new environment.

  What would be the appropriate steps to make this right?

  Thank you.

  Take a look at this KB on how to move an ESXi host at another vCenter vSphere: VMware KB: move a managed ESX ESXi host to a vCenter Server to a different Server vCenter

  And if you are using vDS, you should look here: KB VMware: ESX/ESXi host with vDS passing a vCenter Server to another

• migrate virtual machines to esxi 3.5 free vsphere 4.1 without vcenter

  Hi all

  I have vms on 2 hosts esxi 3.5 with direct (without san)-attached storage that I want to migrate to a new server esxi under license of 4.1 vsphere essentials. I intend using the stand-alone converter to migrate virtual machines from 3.5 to 4.1 and then upgrade the other two hosts to 4.1 and then moving some virtual machines using the converter.

  I have Web servers that I don't want to bring down more than 10 to 20 minutes (not the 1 to 2 hours that should be a cold conversion with converter) so I try to use the feature p2v on the virtual machine running Web servers.

  Has anyone done this with no san and no vcenter? If so how did you do?

  is it possible to migrate without losing configurations of network adapter in the virtual machine?

  I can just do something like taking a snapshot of the system of runnying, then copy files to new host, then add to the inventory, upgrade tools, hardware upgrade?

  Thank you!

  is it possible to migrate without losing configurations of network adapter in the virtual machine?

  After you copy the files and re - add to inventory new virtual machine, you must take care on the issue of handgun that you see in the market.

  Choose I_moved the files to keep the VM UUID and the same virtual MAC address.

  André

• Moving virtual machines between ESX environments

  Hello-

  I understand that when you try to move a virtual machine between two servers to ESX 3.5 disparate, one way to proceed is to use WinSCP to move the files to the machine and then 'register' the machine via the data store on the destination ESX navigation area.  I also read, however, that this practice may not be wise because it is better to execute a command to import, I think that vmkfsutil or something similar to this.  Hope to find confirmation on what would be the best practice in this scenario.

  Thank you very much in advance.

  Why not VMware vCenter Converter

• Can you pass offline virtual machines between data warehouses using the 'Migration' with the basic Kit Essentials feature?

  I speak not of Essentials Plus vMotion between hosts or migration of VMS between hosts and data warehouses online. Just curious to know if its possible to off a virtual machine and click the button to migrate to another store of data with the basic Essentials bundle.

  Welcome to the community - Yes you can - it's what we call a cold migration.

• Migrate a template or a virtual machine between Sites

  Hi, I have a number of virtual machines created in a UAT environment. I can convert these VMs to models OR leave it as what.

  The requirement is to migrate the models to other sites. There is network connectivity between sites, but this is a separate system of SAN. There are the servers in each site that can be used to point to one common share, i.e. a dump file area.

  Via vCenter, I can't see a mechanism to export a model/VM in the OVF format and via the plugin Converter it seems possible to save files to the virtual machine on the disk, but the format of the workstation. In addition, the OVF tool seems to complicated for our needs.

  What process is preferable to move machines between sites - I need the process to be simple as possible.

  Thank you

  good things!  I'm glad that you have built it.

• Migration of a large number of virtual machines between servers

  I have a single ESX server and VirtualCenter (vSphere 4).

  I need to migrate all my virtual machines (30) to a new server, I'm.  They are all turned off (I use them as test beds a small number at a time).

  For the transition, I added two servers in my data center vCenter. I can migrate each VM individually, but it will be extremely painful and long.

  If anyone can recommend a way for me to start moving all virtual machines and let it run for a few days or longer, however it takes, perhaps through orders in the Service Console or?

  Thank you!

  As long as the virtual machine have several virtual disks on different banks of data/files, you should be able to copy files by using for example Veeam FastSCP.

  If you have disks to different stores of data/files, you will need to reconfigure the virtual computer on the target (changing settings or edit the VMX file) because of UUID data warehouses.

  Before copying the files on the new host:

  -remove all attached CD/DVD or ISO virtual machine

  -Reset default CPU flags, see KB1011294 - a host processor is not compatible error message...

  André

• PowerCLI script to migrate virtual machines to the new vCenter environment

  Hello world

  in the next few weeks, we need about migrate 700 VMs (Windows/Linux) server to a new environment (new vCenter, new hosts, but VMs will remain on same data warehouses). VMs will be migrated not in one batch, but rather from time to time (which, however, can understand the need to migrate some 10s of virtual machines at the same time).

  Cluster names and folder structure will be identical to the old and the new vCenters. As host in the new vCenter names differ from those in the old vCenter, thought to provide a table of 'translation', which tells the script to save a given VM on host B (new vCenter) when having been registered in order to host a (old vCenter) and so on.

  I thought writing a PowerCLI script which, broadly speaking, can accomplish the following steps:

  • Connect to vCenterOld and vCenterNew
  • Correspondence table of host to read from a file (see step "register VM vCenterNew below)

  Then, in a loop:

  • Ask VM name
  • Get the settings of the virtual machine: Datastore/path, network/Portgroup, HA restart priority, host, folder, note
  • View the parameters and the VM name and request confirmation migrate the virtual machine
  • Turn off VM (closed OS gracefully, but force power off if power status is still not equal 'off' after a time given)
  • To unsubscribe from VM vCenterOld (removal of inventory)
  • Registry of the VM to the data store vCenterNew (assumptions: same folder as vCenterOld, host names are different, but for each source in vCenterOld host a host of destination in vCenterNew for you join the virtual machine to can be provided, that is, CSV)
  • The value of VM portgroup (same name as in vCenterOld)
  • Set VM HA restart priority
  • PowerON VM
  • Wait / check the VM (for example, ping) connectivity / continue immediately if the virtual machine is accessible or after a certain time if the virtual machine is still inaccessible
  • Confirm that the virtual machine has been migrated successfully, OR ask the user to check the connectivity of the virtual machine

  Now to my questions:

  • Is anyone know about an existing script that does something similar or contains parts that can be useful to compile a script like this?
  • How can vCenter two connections at the same time been managed within a PowerCLI script - or doesn't work at all and a connect/disconnect to/from the two vCenters must be completed for each virtual computer?

  Many thanks for any help.

  The following seems to work for me

  $vm = Get-VM -Name MyVM$nic = Get-NetworkAdapter -VM $vm $vdPG = $nic | select -ExpandProperty NetworkName
  
  Get-VDPortgroup -Name $vdPG
  

• migrate virtual machines from view 5.1 5.2 view Horizons

  Rather than upgrade my current view 5.1 deployment, I'm looking to the installation environment a separate Horizon view 5.2 to migrate to. (1 VCS and 1 VSS)  My users are on dedicated desktop computers that I want to keep during the migration to the new environment.  Is it possible to add desktop computers in a pool without using the template for the pool?   What is the best way to do it?

  Thanks in advance.

  This depends a lot on whether the pool of dedicated assignment users using right now cosists of related or desktop full clone clones. If you use clones related, there are not many things can be done, except so use the Windows Easy Transfer utility to export the profiles of existing virtual machines, hover over the users to a new pool and then use WET to restore their profiles. In addition, if you use Persona for the existing pool, which would save the profile and settings, but any installed application would go when users have been moved to the new linked clone pool.

  If you use full clone desktop computers, you could remove the portal administrator existing display, but not delete disk can create a pool of manual in the new portal administrator display and add the desktop full clone existing to the new pool. This assumes that the old display environment and a new share a common vCenter Server and underlying hosts. Otherwise, you will need to pass a complete clone of a vCenter to another (probably by exporting an ovf of this virtual machine) and then import it into the new.

  I think that there are options, but none of them are ideal. In any case, it would be a good idea to use something like the WET utility to ensure that you have a valid backup of the user's profile before you do anything else.

• Migrated virtual machine appears in the two data stores

  Hi all

  A bit of background on our installation first. servers ESX 3.5 vcenter 4.0 (just improved 2.5) + 2 + 2 data warehouses configured in 1 box of MSA.

  Here is what happened. I've migrated a VM from A to B data store using "Migrate" in vSphere client on vCenter.

  On the vSphere client, virtual machine displays now two data warehouses. In the browser data store, the vme even appears in the two data stores. Datastore shows 20 GB to 20 GB provisioned and 0 GB to 20 GB used. B displays 20 of 20 put into service and used 20 20 GB.

  Migration seems to have succeeded. I migrated about 10 other vm and they reside only on a data store. All virtual machines are working properly. I tried to migrate the computer back to A virtual. He showed only a data store. But the problem appeared again when I migrated the vm to B. I tried to move the virtual machine back and forth between servers ESX, no difference.

  Any ideas? The virtual machine is working well, and it is not necessarily a critical problem. But it's annoying, because I intend to reorganize the data store has and the fear it could cause a problem.

  Thank you so much in advance!

  anything mounted on the CD/DVD drive, as an ISO which can be on A Datastore?