Make a custom page when you access the URL of the root of a Web application

Similar Questions

• How to cancel name for username/password when you access the WIn7 computer to stream?

  Hello

  I have a win7 computer and I would like to access it from a stream. I see the computer win 7 banners, but when I try to connect to access shared folders, it requires username & password. I don't know what they are. I have another computer with Vista from where I can access the computer of win 7. I can also access files on the computer of vista of banners.
  I turned on the discovery network, printer and file sharing, turn on sharing so anyone can read & write files in the public folder. Disabled password protection sharing and allowed Windows to manage the homegroup connections (recommended).
  Can any suggestions on how I disable the name of user and password? or at least what is it?
  Thank you
  Leon.
  PS: He used to work properly without a username, but suddenly he began to pose for her (probably after that I restarted the computer or the streamed)

  Hello

  I understand that you want to cancel the name for username/password when you access the WIn7 computer to stream.

  I suggest you to send your query on the forum of streamer and I hope that they will be able to guide you in the right direction.

  Here is the link:

  http://support-splashtop2.Splashtop.com/forums

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Fonts Typekit works not when you access the site through go daddy domain forwarding.

  Let me start by saying that I am a complete nube. I have a limited knowledge of the terminology and the way that the web works but I'm learning. I have CC, has created a site for a friend and used a typekit fonts. I downloaded the site to my hosting account as a "subdomain" of my website to test and everything seemed to work very well. Once I felt that everything was ready to launch, I went to my account of go daddy friends and did his estate on the site. The site loads very well and all the fonts appear ok except one typekit fonts that I used. When you access the site directly (as a subdomain on my site, example: www.mypersonalsite.com/myfriendssite) I see typekit fonts in all its glory, however when accessing the site of the field pointed no name, no typekit fonts. Very confused. I was under the impression that the two methods to access the site will take you to the same place and yet they net of different results. Any help would be appreciated.

  Hey Danny,

  Web of Typekit fonts are served only for the specified domains to publish on time. You need to specify explicitly field of your friend when the site is published.

  The website URL (s) on the ground in the Upload FTP host and export as HTML dialog boxes take in charge several entries separated by commas as in www.mypersonalsite.com, www,myfriendssite.com

  I hope this helps.

  Abhishek

• Redirect users to the page when you take the system into maintenance mode.

  I want to redirect users to the page when you take the system into maintenance mode. We are on 12.1.3 application. Please provide me with the document who have these details

  Please see old threads that deal with the same subject.

  http://forums.Oracle.com/forums/search.jspa?threadID=&q=redirect+and+maintenance&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=maintenance+and+message&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=outage+and+maintenance&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Do a search of the forum before posting similar questions.

  Thank you
  Hussein

• CC 2015 Illustrator crashes when you use the function "save for Web".

  CC 2015 Illustrator crashes when you use the function "save for Web".

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• E2500: 'the connection to the 192.168.1.1 was interrupted." When you access the configuration page.

  Trying to access the configuration page, 'the connection to the 192.168.1.1 was interrupted."  I'm wired into the router.  Any idea of what is the cause?

  Ugh, I'm stupid... I was using the button in the back instead of the reset button on the bottom.  Thanks for the tip-off that the reset method should have worked.

• HP Officejet J5780: Stripe yellow towards the bottom of the page when you use the document feeder

  When using the document feeder copy has a yellow stripe down page @21/8 "from the left margin. NO problem when using the tray.

  Hi @GlennG1 and welcome to the Forums of HP!

  I see that you have lines in the ADF.  I would like to help!

  I recommend to remove the ink cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend this document:

  Vertical stripes, lines or streaks on Copies, faxes or scan

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Windows 7 asked to "enter network password" when you access the window XP Machine

  Hi all

  I have one two PC with Windows XP Pro & the other with Windows 7 Pro. I've implemented a network & it seems to work but when I try to access my XP Machine from Windows 7 to ask me to enter the network password. I tried to enter my password to login & that did not work, I tried to disable the password for the xp machine and he asks again. What can I do to solve this problem. My xp machine I can access the pc windows 7 very well so I do not understand why this network password W7.

  Did some research on the net and here's what I did to solve the problem that has been produced

  Allowing access to the network without password

  To allow users to log on to their computer without password and then access the XP Professional machine without a password, you must make a change security policy:

  1. Go to Control Panel | Performance and Maintenance | Administrative Tools | Local security policy.
  2. Expand local policies | Security options.
  3. Double-click on accounts: limit local account passwords using empty for the connection to the console only, which is enabled by default. Disable this option and click OK.

  It stopped at the dialog box access network appearing when trying to access my windows xp machine 7!

• How to set the home page when you open the new tab?

  I set Google as my homepage. When you open a new tab, Google does not seem to be

  Hi Zion,

  It is the default behavior of Firefox. There are a lot of large modules that will allow you to customize the new tab page. Take a look at the Knowledge Base article, find and install add-ons to add functionality to Firefox. It will show you how to find and manage the Add-ons of Firefox.

  Hope this helps!

• New message when you access the internet

  HP - p6654y office, 64 bit op sy, using windows 7 > when I try to access the internet, I get this message Service Manager: t8ExtPEx.dll is missing.              What does that mean?  do I need it, if so, what to do do next to get it back?

  I followed the suggestion, but still got the message. So what I did to remove 2 new toolbar add ons that I have on my pc recently. After removing those, I no longer get the message & I can print some of the forms I needed - until I could not.

  Thank you for responding.

• Blank page when you use the section in a RTF

  I created a type of standard form with details of travel for each employee, page break on employee. To start numbering pages at 1 at the next employee, I used a section break.
  However, now I have an extra white page on each employee.
  A simplified version of the xml and rtf file can be found here:
  
  http://www2.Potsdam.edu/collinkj/BIPUBLISHER/
  
  It was created with Oracle BI Publisher 11.1.1.6
  
  Any ideas on what is causing the extra page would be appreciated.

  When you use @section it will by default set a new page for each group kept u and also reset page number.

  But in your model, you have used @section and also a jump of page before the end of the loop. delete this page break before the loop-end for each section.

  You must also remove the space after in your rtf model and space after each form field in section

  It will solve the problem.

  Published by: Avinash_Varma on February 11, 2013 14:51

• Landing on the top/premier page when you scroll the articles?

  I searched the web for the answer to my question, but was unable to find a solution.

  Adobe DPS has a feature that, when scroll (horizontally) the items, makes the Viewer always land on the first page of the article? Instead of landing on the page previously displayed in this article.

  Laughing out loud

• Forbidden/403 error when you access the OIF after installation

  Hello
  
  I just installed OID + OVD + OIF on a Windows 2003 server. The Oracle database is on a separate machine.
  
  For the installation of the OID + OVD + OIF, I installed WebLogic 10.3.3, then ran the installer OID + OVD + OIF and was able to do successfully.
  
  I then rebooted (seems to be necessary), then ran startNodemanager.cmd and can access the Console of WL and seen the servers 'wls_ods1' and 'wls_oif1 '.
  
  I have two of these servers has started successfully.
  
  When I go to http:// < host >: 7005/dohad, I have the console of the ODS.
  
  But, when I go to http:// < host >: 7499/fed, I get an error 403/forbidden.
  
  I checked the Adminserver log file and the wls_oif1 log file, and there are no errors. In addition, the log file of access for the wls_oif1 server shows no access.
  
  Is there an extra step that I have to do to enable the server of the OIF?
  
  Thank you
  Jim

  You are using an incorrect URL. Please use this:

  http://: 7499/fed/PDI/initiatesso

  and / or

  http://: 7499/fed/sp/initiatesso

  If you want to administer the OIF, you can use the MS enterprise manager. Using the em, you can start the OIF and use the url above.

  http://: 7001/em
  http://: 7001/em

  Port 7001 is the default value; If you thing hv selected during installation, then use this port. The login is (by default) weblogic and password, this is what you gave when installing.

  I hope this helps. Let us know.

  Published by: AmbarishMitra on April 11, 2011 10:33

• How to prevent large gaps on the Web page when you use the behaviours slide?

  I searched the forums for similar problems with application behavior slide to the elements through the DW CS5 interface and find a useful post titled "problem with Spry Applying"Slide Effect"so now my slide effects works the way I want to, except instead of dragging out a legend after clicking on an image I slip on a list of text items when you click on a section of text.  It works, but there is a gap when the first load of the Web page. How can I remove/avoid this great whitespace to appear?

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > test Document < /title >

  "<!-< script type =" text/javascript"src ="... / SpryAssets/SpryEffects.js "> < / script > - >"

  < script src = "SpryAssets/SpryEffects.js" type = "text/javascript" > < / script > "

  < script type = "text/javascript" >

  function MM_effectSlide (targetElement, duration, of, to, toggle)

  {

  Spry.Effect.DoSlide (targetElement, {duration: duration,:, to: to, turn on/off: toggle});

  }

  < /script >

  < / head >

  < body >

  < p > < / p >

  < p > < / p >

  < style type = "text/css" >

  #LOdiv {visibility: hidden ;}}

  #Countries {visibility: hidden ;}}

  < / style >

  < p > < / p >

  < p > < / p >

  (< div id = "Latte" onclick = "MM_effectSlide ('LOdiv', 1000,"0% ", 100%", true) ">"

  < p > < strong > drop-down list One + show < facilities > < / p >

  < / div >

  < div id = "LOdiv" >

  < div >

  -Item A < br / >

  -Point B < br / >

  -Point C < br / >

  -Section D < br / >

  -Point E < br / >

  -Item F < br / >

  -G spot < br / >

  -Point H < br / >

  -I point < / div >

  < / div >

  < / div >

  (< div id = "ListTwo" onclick = "MM_effectSlide ('country', 1000,"0% ", 100%", true) ">"

  < p > < strong > list two + show < facilities > < / p >

  < / div >

  < div id = 'Country' >

  < div >

  -USA < br / >

  -Germany < br / >

  -France < br / >

  -Italy < br / >

  -Japan < br / >

  -China < br / >

  < / div >

  < / div >

  < span style = "width: 990px;" height: 21px' > < img width = 990 height = 21

  SRC = "image386.gif" >

  </span >

  < / body >

  < / html >

  Hello

  in my opinion, this technique is not designed for the two panels. To do this you must use the "Spry several sliding elements"-technique in which panels will be triggered by the individual buttons. "" Here is the link for it:

  http://labs.adobe.com/technologies/spry/samples/effects/multiple_slides_sample.html.

  Hans-Günter

• When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

  I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

  Hi NatalieFoster,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Virtual PC and XP Mode TechNet Forums