Make all folders have the same icons

Similar Questions

• It cannot open any programs they all have the same icon on the desktop and start programs... why?

  All of the icons on the desktop and on the start menu have the same icon and will not open... I have new sony computer with windows 7... I tried to move music to a file to burn a cd, he asked what program I should use to open them have all records have the same program and open the habit... I don't run a virus, malware, none of the infected files.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you try the steps from the following link:

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Method 2
  The issue could be due to the virus on the computer. I suggest you run virus scanner online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• Windows 7-How to disable the Preview on my desktop icon, I have many files on my desktop, it's easier when all of the PDF files have the same icon instead of a preview icon.

  How can I disable the Preview on my desktop icon, I have many files on my desktop, it's easier when all of the PDF files have the same icon instead of a preview icon. so, I immediately see who is PDF and DWG. at the moment they all look different because the icon shows a preview of the contents of the file.

  Hi Khody,

   

  To change your windows 7 application icon you can use following the procedure-
  a. Right click on the desktop icon and then click Properties.
  b. now Select the shortcut tab and see button below to change the icon. Click the button change icon now all the icons.
  c. you can choose a of the icons that you want for the shortcut.

   

  I hope this helps.

• How to make all audio at the same level?

  I have a sequence of many clips in first pro, and I could swear I've heard of a way to make all audio on the same level or db. Is there a way to do this? I have a few clips in the timeline with different levels and should be old enough to go to manually balance their volume.

  There is a way to do what you want, but it must be used with caution.  If you open the Audio Mixer Panel, select mixer of track and the track that your clips are on.  Click on the arrow at the top left of the track work (you may need to do it twice) and and access the small white window that goes down.  (See using Adobe https://helpx.adobe.com/pdf/premiere_pro_reference.pdf page 365 if you have not done this before) In the right side of this window, right-click on one of the spikes back arrow and select Amplitude and Compression and dynamics.

  

  The word dynamic appears in the white window at the top of channel mixer.  Left click on the word dynamic and select Edit.  I pasted below the appropriate settings.

  

  If you are not familiar with Compressor/Limiter, use the parameter above.

  Now read your timeline and listen carefully while I look at the counters this setting should be good for normally recorded material, and I hope that you do have to do something more. If there is still following problems may be necessary. Schedule audio below (2) drag any clip that's too soft.  All that is too strong to do drag on the calendar below that (3). For the dynamic audio editing 2 repeat the process with the effect but change the makeup to 12.00dB.  For editing audio 3 change the makeup to 0dB setting.  It's not perfect, but it should give you a low-tech solution.   I hope this helps.

• How can I make all my clips the same size

  At the moment I have in the time line and were used for each of them to the scale of the image size option, but some size to full screen and some don't, I want them all the same size, what can I do?

  Greetings

  Select the item in the timeline, open the effect controls panel, use the scale to increase or decrease the size of the image.

  Peter Garaway

  Adobe

  Premiere Pro

• How to make an image have the same link on every page?

  Basically, I have over 100 pages on this site that I'm working on. I recently changed an image or two or three, and now the previous links are bad for the new image. For example the ~ (home) ~ button goes to the search page. And I reallllllly won't change each page if I have to. How can I make the 'House' image always link to the home page for any page that is under the site?

  Thank you!

  CTRL + F = find and replace.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• All of my Windows Vista programs appear under the same icon.

  Problem with Vista programs: all of my Windows Vista programs make their appearance as the same icon.  How can I fix it and what happened?

  Rebuild the cache icon as follows: http://www.vistax64.com/tutorials/117229-icon-cache-rebuild.html.  That should take care of the problem.  I don't know why it happened - but I've seen it before, and we never really determined the cause then either.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to get the text have the same effect as the video?

  Hello

  For the first time post here, but I wonder how to get the text of the titles have the same effect as the video behind her.

  For my video, I use 'bad tv' and other effects such as Gaussian that obviously changes the appearance of video, creating the look of VHS. However, I then inserted text via the title, but it normally appears. How can I make this text have the same effects as the video behind it?

  A friend told me I might need to add text to the video first, then do the effects, I have not tried, but wonder if there is an easier way, as this would require me to restart.

  EDIT: That's what I'm looking for. https://youtu.be/7_2PHQI89dI?t=24s The text has the same effect as the video.

  Thank you

  One way is to create a clip made up based on the title and the original clip. Then apply the effect.

  Another way is to use an adjustment layer.

  Good luck.

  Russ

• Impossible to make it appear in the volume icon notification area. Have you tried all the procedures of sugested suggested on Microsoft Help.

  Impossible to make it appear in the volume icon notification area.  Have you tried all the procedures of sugested suggested on Microsoft Help.

  Try this:

  In the run box type: regedit, click OK
  Navigate to:

  HKEY_CURRENT_USER
  \SOFTWARE
  \Microsoft
  \Windows
  \CurrentVersion
  \Explorer
  \TrayNotify

  Right-click on icon stream, click on remove, restart your computer.
  The icon stream all will return.
  This works on most of the configurations.
  You may need to do a few times.

• In windows movie maker, how can I change my clips so that they all have the same duration after that I added the?

  Original title: Windows Movie Maker

  In windows movie maker, how can I change my clips so that they all have the same duration after that I added the?

  Hi Ashley44,

  You can use the trim function in Windows Movie Maker to change the duration of the film. See the link below for the steps

  To trim a video clip

  If you want more advanced features, you can use Windows Live Movie Maker

  http://explore.live.com/Windows-Live-Movie-Maker-stunning-in-seconds?OS=other

• Whenever I have download my photos in the photo gallery, the icons of all out like the same generic image

  Whenever I have download my photos in the photo gallery, the icons of all out like the same generic image for each photo, instead of actual miniatures of the photo itself.  I can't find the pictures I'm looking.  Why is this happening and how can I solve this problem?

  This parameter can be:

  (1) open Folder Options (search for your search box on the start menu to find)

  (2) on the display tab, verify that the "always show icons never thumbnails" is off (disabled)

• All the program icons have the same appearance and open Windows Media Center

  Original title: cannot start a program
  When I click on an any program icon on the Windows 7 Desktop, a window appears with its contents: suggested program to open Windows Media Center. All the programs on the desktop icons have the same appearance.

  Using Word 2007 to get an example:

  I've seen this happen when opening a program via a shortcut on the desktop (for example. LNK file), you are asked what type of program to open it with. After you select theWord (or another program) via the Select a program from a list of programs installedand checkalways use the selected program to open this type of file, the referenced by the shortcut of origin Word document opens in Word as it should.

  The problem is that now all shortcuts (for example. LNK files) on the desktop or in the Explorer will want to be opened by Word and use Word icon to display the shortcut. This is known as a file association and the default icon. The same condition can occur if you have performed these actions on one. JPG or even a. EXE, but the. LNK explanation is much more likely.

  This has happened enough that a small utility was written to cancel the. LNK file association was created. There is a registry hack to do this, but I recommend the utility unLNK for its ease of use.

  A utility to Unassociate Types of files in Windows 7 and Vista
  http://www.Winhelponline.com/articles/231/1/an-utility-to-unassociate-file-types-in-Windows-7-and-Vista.html

  Just use the utility to unassociate the. LNK files. Operating instructions are available on the web page above (the same place to get the utility).

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• Now, all the applications on my Mac air show the same icon and doesn't open, please help!

  I did a quick cleaning on my Mac and now all my applications show the same icon and does not open! TIA :-)

  "quick clean up"...

  It seems that you may have removed some system files, you shouldn't have.

  If your Mac is running v10.7 Lion or later, you can restore OS X using OS X Recovery.

• When I use firefox now, I don't see with tab I work, they all have the same color (I got like 5 different ones on this subject is difficult).

  I have installated 10 Windows, now all tabs are the same color and I can't see with tab that I work.

  This can change the colors of the tab,

  Restorer Classic theme (Customize Australis) {web link}
  Restore the tabs squared, appmenu, modules, small display bar icons and more on Australis UI (Windows/MacOSX/Linux + Fx 29 +).

  This will restore a lot of things the latest updates brought.

  http://forums.mozillazine.org/viewtopic.php?f=48 & t = 2827985
  Restorer of classic theme - thread (v2)

  [email protected] Classic theme restaurateur - Support E-mail

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Adobe Shockwave for Director Netscape plug-in, version 12.0.2.122
  Adobe Shockwave for Director Netscape plug-in, version 12.1
  
  Having multiple versions of a program can cause problems.
  You must remove older programs. Then download the current full installer.

  Shockwave Director:
  Shockwave Standalone install / Uninstaller {web link}
  Shockwave Director Version 12.1.9.160 http://get.adobe.com/shockwave/

• I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in one class. How to unlock my password. Carol in English

  I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in ONE class. How to unlock my login and my password, so that I can use it for all classes. Carol in English

  "Remember Me" for the site connections automatically when you return to the Web site is done with a Cookie the site in Firefox.

  Try to clear your Cookies for this Web site.
  
  Tools > Options-> life privacy - Cookies = the button show Cookies.
  
  You must use the custom settings for history at the top of this tab to see the View the Cookies button.

  Enter the domain name in the top search bar and all Cookies for this URL will be displayed. Unless you can figure out which is Cookie to "remember me", you will need to delete them all.

  Hold the {Ctrl} key while you click each Cookie in the small window. When this list is all highlighted, click the Cookie delete button at the bottom left.
  When you are finished click Close.